Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "Boston platform support:
   - Document DT bindings
   - Add CLK driver for board clocks

  CM:
   - Avoid per-core locking with CM3 & higher
   - WARN on attempt to lock invalid VP, not BUG

  CPS:
   - Select CONFIG_SYS_SUPPORTS_SCHED_SMT for MIPSr6
   - Prevent multi-core with dcache aliasing
   - Handle cores not powering down more gracefully
   - Handle spurious VP starts more gracefully

  DSP:
   - Add lwx & lhx missaligned access support

  eBPF:
   - Add MIPS support along with many supporting change to add the
     required infrastructure

  Generic arch code:
   - Misc sysmips MIPS_ATOMIC_SET fixes
   - Drop duplicate HAVE_SYSCALL_TRACEPOINTS
   - Negate error syscall return in trace
   - Correct forced syscall errors
   - Traced negative syscalls should return -ENOSYS
   - Allow samples/bpf/tracex5 to access syscall arguments for sane
     traces
   - Cleanup from old Kconfig options in defconfigs
   - Fix PREF instruction usage by memcpy for MIPS R6
   - Fix various special cases in the FPU eulation
   - Fix some special cases in MIPS16e2 support
   - Fix MIPS I ISA /proc/cpuinfo reporting
   - Sort MIPS Kconfig alphabetically
   - Fix minimum alignment requirement of IRQ stack as required by
     ABI / GCC
   - Fix special cases in the module loader
   - Perform post-DMA cache flushes on systems with MAARs
   - Probe the I6500 CPU
   - Cleanup cmpxchg and add support for 1 and 2 byte operations
   - Use queued read/write locks (qrwlock)
   - Use queued spinlocks (qspinlock)
   - Add CPU shared FTLB feature detection
   - Handle tlbex-tlbp race condition
   - Allow storing pgd in C0_CONTEXT for MIPSr6
   - Use current_cpu_type() in m4kc_tlbp_war()
   - Support Boston in the generic kernel

  Generic platform:
   - yamon-dt: Pull YAMON DT shim code out of SEAD-3 board
   - yamon-dt: Support > 256MB of RAM
   - yamon-dt: Use serial* rather than uart* aliases
   - Abstract FDT fixup application
   - Set RTC_ALWAYS_BCD to 0
   - Add a MAINTAINERS entry

  core kernel:
   - qspinlock.c: include linux/prefetch.h

  Loongson 3:
   - Add support

  Perf:
   - Add I6500 support

  SEAD-3:
   - Remove GIC timer from DT
   - Set interrupt-parent per-device, not at root node
   - Fix GIC interrupt specifiers

  SMP:
   - Skip IPI setup if we only have a single CPU

  VDSO:
   - Make comment match reality
   - Improvements to time code in VDSO"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (86 commits)
  locking/qspinlock: Include linux/prefetch.h
  MIPS: Fix MIPS I ISA /proc/cpuinfo reporting
  MIPS: Fix minimum alignment requirement of IRQ stack
  MIPS: generic: Support MIPS Boston development boards
  MIPS: DTS: img: Don't attempt to build-in all .dtb files
  clk: boston: Add a driver for MIPS Boston board clocks
  dt-bindings: Document img,boston-clock binding
  MIPS: Traced negative syscalls should return -ENOSYS
  MIPS: Correct forced syscall errors
  MIPS: Negate error syscall return in trace
  MIPS: Drop duplicate HAVE_SYSCALL_TRACEPOINTS select
  MIPS16e2: Provide feature overrides for non-MIPS16 systems
  MIPS: MIPS16e2: Report ASE presence in /proc/cpuinfo
  MIPS: MIPS16e2: Subdecode extended LWSP/SWSP instructions
  MIPS: MIPS16e2: Identify ASE presence
  MIPS: VDSO: Fix a mismatch between comment and preprocessor constant
  MIPS: VDSO: Add implementation of gettimeofday() fallback
  MIPS: VDSO: Add implementation of clock_gettime() fallback
  MIPS: VDSO: Fix conversions in do_monotonic()/do_monotonic_coarse()
  MIPS: Use current_cpu_type() in m4kc_tlbp_war()
  ...

5 files changed, 115 insertions, 0 deletions

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index d406b087553f..68ca2d9fcd73 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -221,6 +221,7 @@ config COMMON_CLK_VC5
 
 source "drivers/clk/bcm/Kconfig"
 source "drivers/clk/hisilicon/Kconfig"
+source "drivers/clk/imgtec/Kconfig"
 source "drivers/clk/keystone/Kconfig"
 source "drivers/clk/mediatek/Kconfig"
 source "drivers/clk/meson/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 4f6a812342ed..cd376b3fb47a 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -60,6 +60,7 @@ obj-y					+= bcm/
 obj-$(CONFIG_ARCH_BERLIN)		+= berlin/
 obj-$(CONFIG_H8300)			+= h8300/
 obj-$(CONFIG_ARCH_HISI)			+= hisilicon/
+obj-y					+= imgtec/
 obj-$(CONFIG_ARCH_MXC)			+= imx/
 obj-$(CONFIG_MACH_INGENIC)		+= ingenic/
 obj-$(CONFIG_ARCH_KEYSTONE)		+= keystone/
diff --git a/drivers/clk/imgtec/Kconfig b/drivers/clk/imgtec/Kconfig
new file mode 100644
index 000000000000..f6dcb748e9c4
--- /dev/null
+++ b/drivers/clk/imgtec/Kconfig
@@ -0,0 +1,9 @@
+config COMMON_CLK_BOSTON
+	bool "Clock driver for MIPS Boston boards"
+	depends on MIPS || COMPILE_TEST
+	select MFD_SYSCON
+	---help---
+	  Enable this to support the system & CPU clocks on the MIPS Boston
+	  development board from Imagination Technologies. These are simple
+	  fixed rate clocks whose rate is determined by reading a platform
+	  provided register.
diff --git a/drivers/clk/imgtec/Makefile b/drivers/clk/imgtec/Makefile
new file mode 100644
index 000000000000..ac779b8c22f2
--- /dev/null
+++ b/drivers/clk/imgtec/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_COMMON_CLK_BOSTON)		+= clk-boston.o
diff --git a/drivers/clk/imgtec/clk-boston.c b/drivers/clk/imgtec/clk-boston.c
new file mode 100644
index 000000000000..f18f10351785
--- /dev/null
+++ b/drivers/clk/imgtec/clk-boston.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2016-2017 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#define pr_fmt(fmt) "clk-boston: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+
+#include <dt-bindings/clock/boston-clock.h>
+
+#define BOSTON_PLAT_MMCMDIV		0x30
+# define BOSTON_PLAT_MMCMDIV_CLK0DIV	(0xff << 0)
+# define BOSTON_PLAT_MMCMDIV_INPUT	(0xff << 8)
+# define BOSTON_PLAT_MMCMDIV_MUL	(0xff << 16)
+# define BOSTON_PLAT_MMCMDIV_CLK1DIV	(0xff << 24)
+
+#define BOSTON_CLK_COUNT 3
+
+static u32 ext_field(u32 val, u32 mask)
+{
+	return (val & mask) >> (ffs(mask) - 1);
+}
+
+static void __init clk_boston_setup(struct device_node *np)
+{
+	unsigned long in_freq, cpu_freq, sys_freq;
+	uint mmcmdiv, mul, cpu_div, sys_div;
+	struct clk_hw_onecell_data *onecell;
+	struct regmap *regmap;
+	struct clk_hw *hw;
+	int err;
+
+	regmap = syscon_node_to_regmap(np->parent);
+	if (IS_ERR(regmap)) {
+		pr_err("failed to find regmap\n");
+		return;
+	}
+
+	err = regmap_read(regmap, BOSTON_PLAT_MMCMDIV, &mmcmdiv);
+	if (err) {
+		pr_err("failed to read mmcm_div register: %d\n", err);
+		return;
+	}
+
+	in_freq = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_INPUT) * 1000000;
+	mul = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_MUL);
+
+	sys_div = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_CLK0DIV);
+	sys_freq = mult_frac(in_freq, mul, sys_div);
+
+	cpu_div = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_CLK1DIV);
+	cpu_freq = mult_frac(in_freq, mul, cpu_div);
+
+	onecell = kzalloc(sizeof(*onecell) +
+			  (BOSTON_CLK_COUNT * sizeof(struct clk_hw *)),
+			  GFP_KERNEL);
+	if (!onecell)
+		return;
+
+	onecell->num = BOSTON_CLK_COUNT;
+
+	hw = clk_hw_register_fixed_rate(NULL, "input", NULL, 0, in_freq);
+	if (IS_ERR(hw)) {
+		pr_err("failed to register input clock: %ld\n", PTR_ERR(hw));
+		return;
+	}
+	onecell->hws[BOSTON_CLK_INPUT] = hw;
+
+	hw = clk_hw_register_fixed_rate(NULL, "sys", "input", 0, sys_freq);
+	if (IS_ERR(hw)) {
+		pr_err("failed to register sys clock: %ld\n", PTR_ERR(hw));
+		return;
+	}
+	onecell->hws[BOSTON_CLK_SYS] = hw;
+
+	hw = clk_hw_register_fixed_rate(NULL, "cpu", "input", 0, cpu_freq);
+	if (IS_ERR(hw)) {
+		pr_err("failed to register cpu clock: %ld\n", PTR_ERR(hw));
+		return;
+	}
+	onecell->hws[BOSTON_CLK_CPU] = hw;
+
+	err = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, onecell);
+	if (err)
+		pr_err("failed to add DT provider: %d\n", err);
+}
+
+/*
+ * Use CLK_OF_DECLARE so that this driver is probed early enough to provide the
+ * CPU frequency for use with the GIC or cop0 counters/timers.
+ */
+CLK_OF_DECLARE(clk_boston, "img,boston-clock", clk_boston_setup);