aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/rc/nuvoton-cir.c
diff options
context:
space:
mode:
authorHeiner Kallweit2017-07-15 17:13:14 -0400
committerMauro Carvalho Chehab2017-08-20 09:47:57 -0400
commit87284271b73b80ae773747bf95dae83773746113 (patch)
tree6ccb804cf6afea507b181b220768f34d6143f07d /drivers/media/rc/nuvoton-cir.c
parenta8c2d62b1bddf5fa4d23a380be8904e5593c2b40 (diff)
media: rc: nuvoton: remove rudimentary transmit functionality
Transmit support in this driver was never tested and based on the code it can't work. Just one example: The buffer provided to nvt_tx_ir holds unsigned int values in micro seconds: First value is for a pulse, second for a pause, etc. Bytes in this buffer are copied as-is to the chip FIFO what can't work as the chip-internal format is totally different. See also conversion done in nvt_process_rx_ir_data. Even if we would try to fix this we have the issue that we can't test it. There seems to be no device on the market using IR transmit with one of the chips supported by this driver. To facilitate maintenance of the driver I'd propose to remove the rudimentary transmit support. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Diffstat (limited to 'drivers/media/rc/nuvoton-cir.c')
-rw-r--r--drivers/media/rc/nuvoton-cir.c114
1 files changed, 3 insertions, 111 deletions
diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
index c44f723081cb..5249cb58ea73 100644
--- a/drivers/media/rc/nuvoton-cir.c
+++ b/drivers/media/rc/nuvoton-cir.c
@@ -727,70 +727,6 @@ out_raw:
return ret;
}
-/*
- * nvt_tx_ir
- *
- * 1) clean TX fifo first (handled by AP)
- * 2) copy data from user space
- * 3) disable RX interrupts, enable TX interrupts: TTR & TFU
- * 4) send 9 packets to TX FIFO to open TTR
- * in interrupt_handler:
- * 5) send all data out
- * go back to write():
- * 6) disable TX interrupts, re-enable RX interupts
- *
- * The key problem of this function is user space data may larger than
- * driver's data buf length. So nvt_tx_ir() will only copy TX_BUF_LEN data to
- * buf, and keep current copied data buf num in cur_buf_num. But driver's buf
- * number may larger than TXFCONT (0xff). So in interrupt_handler, it has to
- * set TXFCONT as 0xff, until buf_count less than 0xff.
- */
-static int nvt_tx_ir(struct rc_dev *dev, unsigned *txbuf, unsigned n)
-{
- struct nvt_dev *nvt = dev->priv;
- unsigned long flags;
- unsigned int i;
- u8 iren;
- int ret;
-
- spin_lock_irqsave(&nvt->lock, flags);
-
- ret = min((unsigned)(TX_BUF_LEN / sizeof(unsigned)), n);
- nvt->tx.buf_count = (ret * sizeof(unsigned));
-
- memcpy(nvt->tx.buf, txbuf, nvt->tx.buf_count);
-
- nvt->tx.cur_buf_num = 0;
-
- /* save currently enabled interrupts */
- iren = nvt_cir_reg_read(nvt, CIR_IREN);
-
- /* now disable all interrupts, save TFU & TTR */
- nvt_cir_reg_write(nvt, CIR_IREN_TFU | CIR_IREN_TTR, CIR_IREN);
-
- nvt->tx.tx_state = ST_TX_REPLY;
-
- nvt_cir_reg_write(nvt, CIR_FIFOCON_TX_TRIGGER_LEV_8 |
- CIR_FIFOCON_RXFIFOCLR, CIR_FIFOCON);
-
- /* trigger TTR interrupt by writing out ones, (yes, it's ugly) */
- for (i = 0; i < 9; i++)
- nvt_cir_reg_write(nvt, 0x01, CIR_STXFIFO);
-
- spin_unlock_irqrestore(&nvt->lock, flags);
-
- wait_event(nvt->tx.queue, nvt->tx.tx_state == ST_TX_REQUEST);
-
- spin_lock_irqsave(&nvt->lock, flags);
- nvt->tx.tx_state = ST_TX_NONE;
- spin_unlock_irqrestore(&nvt->lock, flags);
-
- /* restore enabled interrupts to prior state */
- nvt_cir_reg_write(nvt, iren, CIR_IREN);
-
- return ret;
-}
-
/* dump contents of the last rx buffer we got from the hw rx fifo */
static void nvt_dump_rx_buf(struct nvt_dev *nvt)
{
@@ -895,11 +831,6 @@ static void nvt_cir_log_irqs(u8 status, u8 iren)
CIR_IRSTS_TFU | CIR_IRSTS_GH) ? " ?" : "");
}
-static bool nvt_cir_tx_inactive(struct nvt_dev *nvt)
-{
- return nvt->tx.tx_state == ST_TX_NONE;
-}
-
/* interrupt service routine for incoming and outgoing CIR data */
static irqreturn_t nvt_cir_isr(int irq, void *data)
{
@@ -952,40 +883,8 @@ static irqreturn_t nvt_cir_isr(int irq, void *data)
if (status & CIR_IRSTS_RFO)
nvt_handle_rx_fifo_overrun(nvt);
-
- else if (status & (CIR_IRSTS_RTR | CIR_IRSTS_PE)) {
- /* We only do rx if not tx'ing */
- if (nvt_cir_tx_inactive(nvt))
- nvt_get_rx_ir_data(nvt);
- }
-
- if (status & CIR_IRSTS_TE)
- nvt_clear_tx_fifo(nvt);
-
- if (status & CIR_IRSTS_TTR) {
- unsigned int pos, count;
- u8 tmp;
-
- pos = nvt->tx.cur_buf_num;
- count = nvt->tx.buf_count;
-
- /* Write data into the hardware tx fifo while pos < count */
- if (pos < count) {
- nvt_cir_reg_write(nvt, nvt->tx.buf[pos], CIR_STXFIFO);
- nvt->tx.cur_buf_num++;
- /* Disable TX FIFO Trigger Level Reach (TTR) interrupt */
- } else {
- tmp = nvt_cir_reg_read(nvt, CIR_IREN);
- nvt_cir_reg_write(nvt, tmp & ~CIR_IREN_TTR, CIR_IREN);
- }
- }
-
- if (status & CIR_IRSTS_TFU) {
- if (nvt->tx.tx_state == ST_TX_REPLY) {
- nvt->tx.tx_state = ST_TX_REQUEST;
- wake_up(&nvt->tx.queue);
- }
- }
+ else if (status & (CIR_IRSTS_RTR | CIR_IRSTS_PE))
+ nvt_get_rx_ir_data(nvt);
spin_unlock(&nvt->lock);
@@ -1062,7 +961,7 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
if (!nvt)
return -ENOMEM;
- /* input device for IR remote (and tx) */
+ /* input device for IR remote */
nvt->rdev = devm_rc_allocate_device(&pdev->dev, RC_DRIVER_IR_RAW);
if (!nvt->rdev)
return -ENOMEM;
@@ -1105,8 +1004,6 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
pnp_set_drvdata(pdev, nvt);
- init_waitqueue_head(&nvt->tx.queue);
-
ret = nvt_hw_detect(nvt);
if (ret)
return ret;
@@ -1131,7 +1028,6 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
rdev->encode_wakeup = true;
rdev->open = nvt_open;
rdev->close = nvt_close;
- rdev->tx_ir = nvt_tx_ir;
rdev->s_tx_carrier = nvt_set_tx_carrier;
rdev->s_wakeup_filter = nvt_ir_raw_set_wakeup_filter;
rdev->device_name = "Nuvoton w836x7hg Infrared Remote Transceiver";
@@ -1148,8 +1044,6 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
#if 0
rdev->min_timeout = XYZ;
rdev->max_timeout = XYZ;
- /* tx bits */
- rdev->tx_resolution = XYZ;
#endif
ret = devm_rc_register_device(&pdev->dev, rdev);
if (ret)
@@ -1205,8 +1099,6 @@ static int nvt_suspend(struct pnp_dev *pdev, pm_message_t state)
spin_lock_irqsave(&nvt->lock, flags);
- nvt->tx.tx_state = ST_TX_NONE;
-
/* disable all CIR interrupts */
nvt_cir_reg_write(nvt, 0, CIR_IREN);