diff options
| author | Arnd Bergmann | 2019-08-05 23:08:58 +0200 |
|---|---|---|
| committer | Arnd Bergmann | 2022-04-21 15:01:11 +0200 |
| commit | d87d44f7ab353dde25300ced494f98b69859a539 (patch) | |
| tree | c6fd0712f7008072eba746fafefd311ae0f50de3 /drivers/pcmcia | |
| parent | 58d37dc1dfd8900892d73da1f26ac1cefca52e6e (diff) | |
ARM: omap1: move CF chipselect setup to board file
There is only one board that uses the omap_cf driver, so
moving the chipselect configuration there does not lead
to code duplication but avoids the use of mach/tc.h
in drivers.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'drivers/pcmcia')
| -rw-r--r-- | drivers/pcmcia/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/pcmcia/omap_cf.c | 38 |
2 files changed, 9 insertions, 32 deletions
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index 2ce261cfff8e..ec977f031bc2 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -246,7 +246,8 @@ config PCMCIA_VRC4171 config OMAP_CF tristate "OMAP CompactFlash Controller" - depends on PCMCIA && ARCH_OMAP16XX + depends on PCMCIA + depends on ARCH_OMAP16XX || (ARM && COMPILE_TEST) help Say Y here to support the CompactFlash controller on OMAP. Note that this doesn't support "True IDE" mode. diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c index f0b2c2d03469..093022ce7d91 100644 --- a/drivers/pcmcia/omap_cf.c +++ b/drivers/pcmcia/omap_cf.c @@ -16,13 +16,12 @@ #include <pcmcia/ss.h> -#include <mach/hardware.h> #include <asm/io.h> #include <linux/sizes.h> -#include <mach/mux.h> -#include <mach/tc.h> - +#include <linux/soc/ti/omap1-io.h> +#include <linux/soc/ti/omap1-soc.h> +#include <linux/soc/ti/omap1-mux.h> /* NOTE: don't expect this to support many I/O cards. The 16xx chips have * hard-wired timings to support Compact Flash memory cards; they won't work @@ -205,6 +204,7 @@ static int __init omap_cf_probe(struct platform_device *pdev) struct omap_cf_socket *cf; int irq; int status; + struct resource *res; seg = (int) pdev->dev.platform_data; if (seg == 0 || seg > 3) @@ -215,6 +215,8 @@ static int __init omap_cf_probe(struct platform_device *pdev) if (irq < 0) return -EINVAL; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + cf = kzalloc(sizeof *cf, GFP_KERNEL); if (!cf) return -ENOMEM; @@ -230,24 +232,7 @@ static int __init omap_cf_probe(struct platform_device *pdev) goto fail0; cf->irq = irq; cf->socket.pci_irq = irq; - - switch (seg) { - /* NOTE: CS0 could be configured too ... */ - case 1: - cf->phys_cf = OMAP_CS1_PHYS; - break; - case 2: - cf->phys_cf = OMAP_CS2_PHYS; - break; - case 3: - cf->phys_cf = omap_cs3_phys(); - break; - default: - goto fail1; - } - cf->iomem.start = cf->phys_cf; - cf->iomem.end = cf->iomem.end + SZ_8K - 1; - cf->iomem.flags = IORESOURCE_MEM; + cf->phys_cf = res->start; /* pcmcia layer only remaps "real" memory */ cf->socket.io_offset = (unsigned long) @@ -273,15 +258,6 @@ static int __init omap_cf_probe(struct platform_device *pdev) pr_info("%s: cs%d on irq %d\n", driver_name, seg, irq); - /* NOTE: better EMIFS setup might support more cards; but the - * TRM only shows how to affect regular flash signals, not their - * CF/PCMCIA variants... - */ - pr_debug("%s: cs%d, previous ccs %08x acs %08x\n", driver_name, - seg, omap_readl(EMIFS_CCS(seg)), omap_readl(EMIFS_ACS(seg))); - omap_writel(0x0004a1b3, EMIFS_CCS(seg)); /* synch mode 4 etc */ - omap_writel(0x00000000, EMIFS_ACS(seg)); /* OE hold/setup */ - /* CF uses armxor_ck, which is "always" available */ pr_debug("%s: sts %04x cfg %04x control %04x %s\n", driver_name, |