diff options
| author | Greg Kroah-Hartman | 2017-11-01 15:07:57 +0100 |
|---|---|---|
| committer | Greg Kroah-Hartman | 2017-11-02 11:10:55 +0100 |
| commit | b24413180f5600bcb3bb70fbed5cf186b60864bd (patch) | |
| tree | 4ebcae0dab27ee8bfcecb9a5daf65353c6dd7ed6 /drivers/scsi | |
| parent | bb176f67090ca54869fc1262c913aa69d2ede070 (diff) | |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/scsi')
81 files changed, 81 insertions, 0 deletions
diff --git a/drivers/scsi/53c700.h b/drivers/scsi/53c700.h index f34c916b95bc..0c9a100af667 100644 --- a/drivers/scsi/53c700.h +++ b/drivers/scsi/53c700.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* -*- mode: c; c-basic-offset: 8 -*- */ /* Driver for 53c700 and 53c700-66 chips from NCR and Symbios diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 93dbe58c47c8..1639bf8b1ab6 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 # # Makefile for linux/drivers/scsi # diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index 8a0812221d72..777b0222d021 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * NCR 5380 generic driver routines. These should make it *trivial* * to implement 5380 SCSI drivers under Linux with a non-trantor diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h index d78f0957d865..31096a0b0fdd 100644 --- a/drivers/scsi/NCR5380.h +++ b/drivers/scsi/NCR5380.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * NCR 5380 defines * diff --git a/drivers/scsi/NCR_D700.h b/drivers/scsi/NCR_D700.h index f167af6bd2af..eb675d782ef6 100644 --- a/drivers/scsi/NCR_D700.h +++ b/drivers/scsi/NCR_D700.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* -*- mode: c; c-basic-offset: 8 -*- */ /* NCR Dual 700 MCA SCSI Driver diff --git a/drivers/scsi/NCR_Q720.h b/drivers/scsi/NCR_Q720.h index 7b9209008187..d5f46cdb736e 100644 --- a/drivers/scsi/NCR_Q720.h +++ b/drivers/scsi/NCR_Q720.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* -*- mode: c; c-basic-offset: 8 -*- */ /* NCR Quad 720 MCA SCSI Driver diff --git a/drivers/scsi/a2091.h b/drivers/scsi/a2091.h index 794b8e65c711..8d8a4074a570 100644 --- a/drivers/scsi/a2091.h +++ b/drivers/scsi/a2091.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef A2091_H #define A2091_H diff --git a/drivers/scsi/a3000.h b/drivers/scsi/a3000.h index 49db4a335aab..5cb3e7535281 100644 --- a/drivers/scsi/a3000.h +++ b/drivers/scsi/a3000.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef A3000_H #define A3000_H diff --git a/drivers/scsi/aha152x.h b/drivers/scsi/aha152x.h index ac4bfa438bf2..efd01877d02b 100644 --- a/drivers/scsi/aha152x.h +++ b/drivers/scsi/aha152x.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _AHA152X_H #define _AHA152X_H diff --git a/drivers/scsi/aha1542.h b/drivers/scsi/aha1542.h index 0fe9bae1b3d1..f5b0d210fb3c 100644 --- a/drivers/scsi/aha1542.h +++ b/drivers/scsi/aha1542.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _AHA1542_H_ #define _AHA1542_H_ diff --git a/drivers/scsi/aha1740.h b/drivers/scsi/aha1740.h index b0c5603461ca..dfdaa4d3ea4e 100644 --- a/drivers/scsi/aha1740.h +++ b/drivers/scsi/aha1740.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _AHA1740_H /* $Id$ diff --git a/drivers/scsi/aic7xxx/Makefile b/drivers/scsi/aic7xxx/Makefile index b03ba0df7a83..c15be2590d1c 100644 --- a/drivers/scsi/aic7xxx/Makefile +++ b/drivers/scsi/aic7xxx/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 # # Makefile for the Linux aic7xxx SCSI driver. # diff --git a/drivers/scsi/aic7xxx/aicasm/Makefile b/drivers/scsi/aic7xxx/aicasm/Makefile index 45e2d49c1fff..243adb0a38d1 100644 --- a/drivers/scsi/aic7xxx/aicasm/Makefile +++ b/drivers/scsi/aic7xxx/aicasm/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 PROG= aicasm OUTDIR ?= ./ diff --git a/drivers/scsi/arm/Makefile b/drivers/scsi/arm/Makefile index 16c3e86a6b1b..b576d9276f71 100644 --- a/drivers/scsi/arm/Makefile +++ b/drivers/scsi/arm/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 # # Makefile for drivers/scsi/arm # diff --git a/drivers/scsi/atp870u.h b/drivers/scsi/atp870u.h index 9b839b1e895a..75c44399fc88 100644 --- a/drivers/scsi/atp870u.h +++ b/drivers/scsi/atp870u.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _ATP870U_H #define _ATP870U_H diff --git a/drivers/scsi/bfa/Makefile b/drivers/scsi/bfa/Makefile index 475cf925d5e8..442fc3db8f1f 100644 --- a/drivers/scsi/bfa/Makefile +++ b/drivers/scsi/bfa/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_SCSI_BFA_FC) := bfa.o bfa-y := bfad.o bfad_im.o bfad_attr.o bfad_debugfs.o bfad_bsg.o diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c index 6dc96c8dfe75..d4c2a2e4c5d4 100644 --- a/drivers/scsi/constants.c +++ b/drivers/scsi/constants.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * ASCII values for a number of symbolic constants, printing functions, * etc. diff --git a/drivers/scsi/csiostor/Makefile b/drivers/scsi/csiostor/Makefile index 3681a3fbd499..d047e22eac0d 100644 --- a/drivers/scsi/csiostor/Makefile +++ b/drivers/scsi/csiostor/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 # ## Chelsio FCoE driver # diff --git a/drivers/scsi/dc395x.h b/drivers/scsi/dc395x.h index fbf35e37701e..5379a936141a 100644 --- a/drivers/scsi/dc395x.h +++ b/drivers/scsi/dc395x.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /************************************************************************/ /* */ /* dc395x.h */ diff --git a/drivers/scsi/eata_generic.h b/drivers/scsi/eata_generic.h index 5016af5cf860..1a396c5e7f73 100644 --- a/drivers/scsi/eata_generic.h +++ b/drivers/scsi/eata_generic.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /******************************************************** * Header file for eata_dma.c and eata_pio.c * * Linux EATA SCSI drivers * diff --git a/drivers/scsi/eata_pio.h b/drivers/scsi/eata_pio.h index 7deeb935748b..5b5e3d13670b 100644 --- a/drivers/scsi/eata_pio.h +++ b/drivers/scsi/eata_pio.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /******************************************************** * Header file for eata_pio.c Linux EATA-PIO SCSI driver * * (c) 1993-96 Michael Neuffer * diff --git a/drivers/scsi/esp_scsi.h b/drivers/scsi/esp_scsi.h index 7e8932ae91f8..8163dca2071b 100644 --- a/drivers/scsi/esp_scsi.h +++ b/drivers/scsi/esp_scsi.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* esp_scsi.h: Defines and structures for the ESP driver. * * Copyright (C) 2007 David S. Miller (davem@davemloft.net) diff --git a/drivers/scsi/fcoe/libfcoe.h b/drivers/scsi/fcoe/libfcoe.h index d3bb16d11401..b8bdfab51a58 100644 --- a/drivers/scsi/fcoe/libfcoe.h +++ b/drivers/scsi/fcoe/libfcoe.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _FCOE_LIBFCOE_H_ #define _FCOE_LIBFCOE_H_ diff --git a/drivers/scsi/fnic/Makefile b/drivers/scsi/fnic/Makefile index 383598fadf04..6214a6b2e96d 100644 --- a/drivers/scsi/fnic/Makefile +++ b/drivers/scsi/fnic/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_FCOE_FNIC) += fnic.o fnic-y := \ diff --git a/drivers/scsi/gdth.h b/drivers/scsi/gdth.h index 3fd8b83ffbf9..95fc720c1b30 100644 --- a/drivers/scsi/gdth.h +++ b/drivers/scsi/gdth.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _GDTH_H #define _GDTH_H diff --git a/drivers/scsi/gdth_ioctl.h b/drivers/scsi/gdth_ioctl.h index b004c6165887..4c91894ac244 100644 --- a/drivers/scsi/gdth_ioctl.h +++ b/drivers/scsi/gdth_ioctl.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _GDTH_IOCTL_H #define _GDTH_IOCTL_H diff --git a/drivers/scsi/gdth_proc.c b/drivers/scsi/gdth_proc.c index d08b2716752c..20add49cdd32 100644 --- a/drivers/scsi/gdth_proc.c +++ b/drivers/scsi/gdth_proc.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* gdth_proc.c * $Id: gdth_proc.c,v 1.43 2006/01/11 16:15:00 achim Exp $ */ diff --git a/drivers/scsi/gdth_proc.h b/drivers/scsi/gdth_proc.h index aaa618198972..d7d0aa283695 100644 --- a/drivers/scsi/gdth_proc.h +++ b/drivers/scsi/gdth_proc.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _GDTH_PROC_H #define _GDTH_PROC_H diff --git a/drivers/scsi/gvp11.h b/drivers/scsi/gvp11.h index 852913cde5dd..61c1a3584461 100644 --- a/drivers/scsi/gvp11.h +++ b/drivers/scsi/gvp11.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef GVP11_H /* $Id: gvp11.h,v 1.4 1997/01/19 23:07:12 davem Exp $ diff --git a/drivers/scsi/ibmvscsi_tgt/libsrp.h b/drivers/scsi/ibmvscsi_tgt/libsrp.h index 9fec55b36322..832606ae2908 100644 --- a/drivers/scsi/ibmvscsi_tgt/libsrp.h +++ b/drivers/scsi/ibmvscsi_tgt/libsrp.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef __LIBSRP_H__ #define __LIBSRP_H__ diff --git a/drivers/scsi/imm.h b/drivers/scsi/imm.h index 8f6f32fc61ff..7f2bb35b1b87 100644 --- a/drivers/scsi/imm.h +++ b/drivers/scsi/imm.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* Driver for the Iomega MatchMaker parallel port SCSI HBA embedded in * the Iomega ZIP Plus drive diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index 3359e10e0d8f..da6f04cae272 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_SCSI_ISCI) += isci.o isci-objs := init.o phy.o request.o \ remote_device.o port.o \ diff --git a/drivers/scsi/libfc/Makefile b/drivers/scsi/libfc/Makefile index 4bb23ac86a5c..65396f86c307 100644 --- a/drivers/scsi/libfc/Makefile +++ b/drivers/scsi/libfc/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 # $Id: Makefile obj-$(CONFIG_LIBFC) += libfc.o diff --git a/drivers/scsi/mac53c94.h b/drivers/scsi/mac53c94.h index 1ad24e4f0a85..5df6e81f78a8 100644 --- a/drivers/scsi/mac53c94.h +++ b/drivers/scsi/mac53c94.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * mac53c94.h: definitions for the driver for the 53c94 SCSI bus adaptor * found on Power Macintosh computers, controlling the external SCSI chain. diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h index 508d65e5a518..21eba2fd465a 100644 --- a/drivers/scsi/megaraid.h +++ b/drivers/scsi/megaraid.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef __MEGARAID_H__ #define __MEGARAID_H__ diff --git a/drivers/scsi/megaraid/Makefile b/drivers/scsi/megaraid/Makefile index 5826ed509e3e..6e74d21227a5 100644 --- a/drivers/scsi/megaraid/Makefile +++ b/drivers/scsi/megaraid/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_MEGARAID_MM) += megaraid_mm.o obj-$(CONFIG_MEGARAID_MAILBOX) += megaraid_mbox.o obj-$(CONFIG_MEGARAID_SAS) += megaraid_sas.o diff --git a/drivers/scsi/mesh.h b/drivers/scsi/mesh.h index 4fdb81fa55e2..ee53c05ace95 100644 --- a/drivers/scsi/mesh.h +++ b/drivers/scsi/mesh.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * mesh.h: definitions for the driver for the MESH SCSI bus adaptor * (Macintosh Enhanced SCSI Hardware) found on Power Macintosh computers. diff --git a/drivers/scsi/mpt3sas/Makefile b/drivers/scsi/mpt3sas/Makefile index b7643f596c1e..84fb3fbdb0ca 100644 --- a/drivers/scsi/mpt3sas/Makefile +++ b/drivers/scsi/mpt3sas/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 # mpt3sas makefile obj-$(CONFIG_SCSI_MPT3SAS) += mpt3sas.o mpt3sas-y += mpt3sas_base.o \ diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h index a9a659fc2812..2608011cc7f1 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright 2000-2015 Avago Technologies. All rights reserved. * diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h index fa61baf7c74d..036c9cf61032 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright 2000-2015 Avago Technologies. All rights reserved. * diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_init.h b/drivers/scsi/mpt3sas/mpi/mpi2_init.h index bba56b61d36c..38b2c879bf0f 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_init.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_init.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright 2000-2015 Avago Technologies. All rights reserved. * diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h index af4be403582e..673cf05f94dc 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright 2000-2015 Avago Technologies. All rights reserved. * diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_raid.h b/drivers/scsi/mpt3sas/mpi/mpi2_raid.h index 1c0eeeeb5eaf..b9bb1c178f12 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_raid.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_raid.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright 2000-2014 Avago Technologies. All rights reserved. * diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_sas.h b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h index c10c2c02a945..afa17ff246b4 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_sas.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright 2000-2015 Avago Technologies. All rights reserved. * diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h index 5f9289a1166f..593765a4ddb8 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_tool.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_tool.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright 2000-2014 Avago Technologies. All rights reserved. * diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_type.h b/drivers/scsi/mpt3sas/mpi/mpi2_type.h index 92a81abc2c31..36494439a419 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_type.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_type.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright 2000-2014 Avago Technologies. All rights reserved. * diff --git a/drivers/scsi/mvme147.c b/drivers/scsi/mvme147.c index 4f515700bdc3..e6b2b681fda3 100644 --- a/drivers/scsi/mvme147.c +++ b/drivers/scsi/mvme147.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 #include <linux/types.h> #include <linux/mm.h> #include <linux/blkdev.h> diff --git a/drivers/scsi/mvme147.h b/drivers/scsi/mvme147.h index bfd4566ef050..f75ff58ddcd0 100644 --- a/drivers/scsi/mvme147.h +++ b/drivers/scsi/mvme147.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef MVME147_H /* $Id: mvme147.h,v 1.4 1997/01/19 23:07:10 davem Exp $ diff --git a/drivers/scsi/osst.h b/drivers/scsi/osst.h index b4fea98ba276..b90ae280853d 100644 --- a/drivers/scsi/osst.h +++ b/drivers/scsi/osst.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * $Header: /cvsroot/osst/Driver/osst.h,v 1.16 2005/01/01 21:13:35 wriede Exp $ */ diff --git a/drivers/scsi/osst_detect.h b/drivers/scsi/osst_detect.h index 21717d0e6974..83c1d4fb11db 100644 --- a/drivers/scsi/osst_detect.h +++ b/drivers/scsi/osst_detect.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #define SIGS_FROM_OSST \ {"OnStream", "SC-", "", "osst"}, \ {"OnStream", "DI-", "", "osst"}, \ diff --git a/drivers/scsi/osst_options.h b/drivers/scsi/osst_options.h index ff1e610946ed..a6a389b88876 100644 --- a/drivers/scsi/osst_options.h +++ b/drivers/scsi/osst_options.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* The compile-time configurable defaults for the Linux SCSI tape driver. diff --git a/drivers/scsi/pcmcia/Makefile b/drivers/scsi/pcmcia/Makefile index 683bf148b5b7..44eea2d43143 100644 --- a/drivers/scsi/pcmcia/Makefile +++ b/drivers/scsi/pcmcia/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 ccflags-y := -Idrivers/scsi diff --git a/drivers/scsi/pm8001/Makefile b/drivers/scsi/pm8001/Makefile index ce4cd87c7c66..02b7338999cc 100644 --- a/drivers/scsi/pm8001/Makefile +++ b/drivers/scsi/pm8001/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 # # Kernel configuration file for the PM8001 SAS/SATA 8x6G based HBA driver # diff --git a/drivers/scsi/ppa.h b/drivers/scsi/ppa.h index ba8021427b88..6a1f8a2d70eb 100644 --- a/drivers/scsi/ppa.h +++ b/drivers/scsi/ppa.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* Driver for the PPA3 parallel port SCSI HBA embedded in * the Iomega ZIP drive * diff --git a/drivers/scsi/qla2xxx/Makefile b/drivers/scsi/qla2xxx/Makefile index 0b767a0bb308..17d5bc1cc56b 100644 --- a/drivers/scsi/qla2xxx/Makefile +++ b/drivers/scsi/qla2xxx/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 qla2xxx-y := qla_os.o qla_init.o qla_mbx.o qla_iocb.o qla_isr.o qla_gs.o \ qla_dbg.o qla_sup.o qla_attr.o qla_mid.o qla_dfs.o qla_bsg.o \ qla_nx.o qla_mr.o qla_nx2.o qla_target.o qla_tmpl.o qla_nvme.o diff --git a/drivers/scsi/qla2xxx/qla_devtbl.h b/drivers/scsi/qla2xxx/qla_devtbl.h index d6ea69df7c5c..ffb9694be748 100644 --- a/drivers/scsi/qla2xxx/qla_devtbl.h +++ b/drivers/scsi/qla2xxx/qla_devtbl.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #define QLA_MODEL_NAMES 0x5C /* diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.h b/drivers/scsi/qla2xxx/tcm_qla2xxx.h index 071035dfa99a..7550ba2831c3 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.h +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #include <target/target_core_base.h> #include <linux/btree.h> diff --git a/drivers/scsi/qlogicfas408.h b/drivers/scsi/qlogicfas408.h index f6b1216af79f..a971db11d293 100644 --- a/drivers/scsi/qlogicfas408.h +++ b/drivers/scsi/qlogicfas408.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* to be used by qlogicfas and qlogic_cs */ #ifndef __QLOGICFAS408_H #define __QLOGICFAS408_H diff --git a/drivers/scsi/qlogicpti.h b/drivers/scsi/qlogicpti.h index 892a0b058b99..884ad72ade57 100644 --- a/drivers/scsi/qlogicpti.h +++ b/drivers/scsi/qlogicpti.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* qlogicpti.h: Performance Technologies QlogicISP sbus card defines. * * Copyright (C) 1996 David S. Miller (davem@caipfs.rutgers.edu) diff --git a/drivers/scsi/scsi.h b/drivers/scsi/scsi.h index d5a55fae60e0..6dcc4c685d1d 100644 --- a/drivers/scsi/scsi.h +++ b/drivers/scsi/scsi.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * scsi.h Copyright (C) 1992 Drew Eckhardt * Copyright (C) 1993, 1994, 1995, 1998, 1999 Eric Youngdale diff --git a/drivers/scsi/scsi_common.c b/drivers/scsi/scsi_common.c index a75673bb82b3..40bc616cf8ab 100644 --- a/drivers/scsi/scsi_common.c +++ b/drivers/scsi/scsi_common.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SCSI functions used by both the initiator and the target code. */ diff --git a/drivers/scsi/scsi_debugfs.c b/drivers/scsi/scsi_debugfs.c index 5e9755008aed..01f08c03f2c1 100644 --- a/drivers/scsi/scsi_debugfs.c +++ b/drivers/scsi/scsi_debugfs.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 #include <linux/seq_file.h> #include <scsi/scsi_cmnd.h> #include <scsi/scsi_dbg.h> diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index 28fea83ae2fe..6bf43d94cdc0 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 #include <linux/blkdev.h> #include <linux/init.h> diff --git a/drivers/scsi/scsi_lib_dma.c b/drivers/scsi/scsi_lib_dma.c index 2ac3f3975f78..5723915275ad 100644 --- a/drivers/scsi/scsi_lib_dma.c +++ b/drivers/scsi/scsi_lib_dma.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * SCSI library functions depending on DMA */ diff --git a/drivers/scsi/scsi_logging.h b/drivers/scsi/scsi_logging.h index 7fe64a847143..6907c924df72 100644 --- a/drivers/scsi/scsi_logging.h +++ b/drivers/scsi/scsi_logging.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _SCSI_LOGGING_H #define _SCSI_LOGGING_H diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h index 5c6d016a5ae9..d7669caa9893 100644 --- a/drivers/scsi/scsi_priv.h +++ b/drivers/scsi/scsi_priv.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _SCSI_PRIV_H #define _SCSI_PRIV_H diff --git a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c index 480a597b3877..7f0ceb65c3f3 100644 --- a/drivers/scsi/scsi_proc.c +++ b/drivers/scsi/scsi_proc.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * linux/drivers/scsi/scsi_proc.c * diff --git a/drivers/scsi/scsi_sas_internal.h b/drivers/scsi/scsi_sas_internal.h index e659912498bd..82fd548c5eee 100644 --- a/drivers/scsi/scsi_sas_internal.h +++ b/drivers/scsi/scsi_sas_internal.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _SCSI_SAS_INTERNAL_H #define _SCSI_SAS_INTERNAL_H diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 15590a063ad9..40124648a07b 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * scsi_scan.c * diff --git a/drivers/scsi/scsi_transport_api.h b/drivers/scsi/scsi_transport_api.h index 934f0e62bb5c..f917766537c0 100644 --- a/drivers/scsi/scsi_transport_api.h +++ b/drivers/scsi/scsi_transport_api.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _SCSI_TRANSPORT_API_H #define _SCSI_TRANSPORT_API_H diff --git a/drivers/scsi/scsicam.c b/drivers/scsi/scsicam.c index 31273468589c..e969138051c7 100644 --- a/drivers/scsi/scsicam.c +++ b/drivers/scsi/scsicam.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * scsicam.c - SCSI CAM support functions, use for HDIO_GETGEO, etc. * diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index 99c4dde9b6bf..320de758323e 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _SCSI_DISK_H #define _SCSI_DISK_H diff --git a/drivers/scsi/sense_codes.h b/drivers/scsi/sense_codes.h index e4e1dccd1f2f..201a536688de 100644 --- a/drivers/scsi/sense_codes.h +++ b/drivers/scsi/sense_codes.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * The canonical list of T10 Additional Sense Codes is available at: * http://www.t10.org/lists/asc-num.txt [most recent: 20141221] diff --git a/drivers/scsi/snic/Makefile b/drivers/scsi/snic/Makefile index ef7c0dd47f40..41546e3cb701 100644 --- a/drivers/scsi/snic/Makefile +++ b/drivers/scsi/snic/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_SCSI_SNIC) += snic.o snic-y := \ diff --git a/drivers/scsi/sr.h b/drivers/scsi/sr.h index 1de33719ad8e..a2bb7b8bace5 100644 --- a/drivers/scsi/sr.h +++ b/drivers/scsi/sr.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * sr.h by David Giller * CD-ROM disk driver header file diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c index 4610c8c5693f..2a21f2d48592 100644 --- a/drivers/scsi/sr_ioctl.c +++ b/drivers/scsi/sr_ioctl.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 #include <linux/kernel.h> #include <linux/mm.h> #include <linux/fs.h> diff --git a/drivers/scsi/sr_vendor.c b/drivers/scsi/sr_vendor.c index 11a238cb2222..e3b0ce25162b 100644 --- a/drivers/scsi/sr_vendor.c +++ b/drivers/scsi/sr_vendor.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* -*-linux-c-*- * vendor-specific code for SCSI CD-ROM's goes here. diff --git a/drivers/scsi/st.h b/drivers/scsi/st.h index 8c732c8de015..95d2e7a7988d 100644 --- a/drivers/scsi/st.h +++ b/drivers/scsi/st.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _ST_H #define _ST_H diff --git a/drivers/scsi/st_options.h b/drivers/scsi/st_options.h index d2f947935554..2b6cabd7b6aa 100644 --- a/drivers/scsi/st_options.h +++ b/drivers/scsi/st_options.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* The compile-time configurable defaults for the Linux SCSI tape driver. diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile index 6e77cb0bfee9..9310c6c83041 100644 --- a/drivers/scsi/ufs/Makefile +++ b/drivers/scsi/ufs/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 # UFSHCD makefile obj-$(CONFIG_SCSI_UFS_DWC_TC_PCI) += tc-dwc-g210-pci.o ufshcd-dwc.o tc-dwc-g210.o obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o ufshcd-dwc.o tc-dwc-g210.o diff --git a/drivers/scsi/wd719x.h b/drivers/scsi/wd719x.h index 9c6dd45f95f5..0455b1633ca7 100644 --- a/drivers/scsi/wd719x.h +++ b/drivers/scsi/wd719x.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _WD719X_H_ #define _WD719X_H_ |