aboutsummaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
authorMatthias Schiffer2020-09-25 10:24:12 +0200
committerGreg Kroah-Hartman2020-09-30 14:31:04 +0200
commitedd64f30792dca1aee1fc27381b7c9c1ec0e9e58 (patch)
treefb87006abbf8dda3ab65082a12df96ad970b05f9 /drivers/tty
parent409cc4541ade015acd11f2566dcda599363a87a3 (diff)
tty: serial: imx: disable TXDC IRQ in imx_uart_shutdown() to avoid IRQ storm
The IPG clock is disabled at the end of imx_uart_shutdown(); we really don't want to run any IRQ handlers after this point. At least on i.MX8MN, the UART will happily continue to generate interrupts even with its clocks disabled, but in this state, all register writes are ignored (which will cause the shadow registers to differ from the actual register values, resulting in all kinds of weirdness). In a transfer without DMA, this could lead to the following sequence of events: - The UART finishes its transmission while imx_uart_shutdown() is run, triggering the TXDC interrupt (we can trigger this fairly reliably by writing a single byte to the TTY and closing it right away) - imx_uart_shutdown() finishes, disabling the UART clocks - imx_uart_int() -> imx_uart_transmit_buffer() -> imx_uart_stop_tx() imx_uart_stop_tx() should now clear UCR4_TCEN to disable the TXDC interrupt, but this register write is ineffective. This results in an interrupt storm. To disable all interrupts in the same place, and to avoid setting UCR4 twice, clearing UCR4_OREN is moved below del_timer_sync() as well; this should be harmless. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20200925082412.12960-1-matthias.schiffer@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/imx.c11
1 files changed, 6 insertions, 5 deletions
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 4e6ead1f650e..1731d9728865 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1552,10 +1552,6 @@ static void imx_uart_shutdown(struct uart_port *port)
ucr2 = imx_uart_readl(sport, UCR2);
ucr2 &= ~(UCR2_TXEN | UCR2_ATEN);
imx_uart_writel(sport, ucr2, UCR2);
-
- ucr4 = imx_uart_readl(sport, UCR4);
- ucr4 &= ~UCR4_OREN;
- imx_uart_writel(sport, ucr4, UCR4);
spin_unlock_irqrestore(&sport->port.lock, flags);
/*
@@ -1568,10 +1564,15 @@ static void imx_uart_shutdown(struct uart_port *port)
*/
spin_lock_irqsave(&sport->port.lock, flags);
+
ucr1 = imx_uart_readl(sport, UCR1);
ucr1 &= ~(UCR1_TRDYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN | UCR1_RXDMAEN | UCR1_ATDMAEN);
-
imx_uart_writel(sport, ucr1, UCR1);
+
+ ucr4 = imx_uart_readl(sport, UCR4);
+ ucr4 &= ~(UCR4_OREN | UCR4_TCEN);
+ imx_uart_writel(sport, ucr4, UCR4);
+
spin_unlock_irqrestore(&sport->port.lock, flags);
clk_disable_unprepare(sport->clk_per);