diff options
| author | Matt Carlson | 2011-06-13 13:39:01 +0000 |
|---|---|---|
| committer | David S. Miller | 2011-06-15 11:11:57 -0400 |
| commit | 221c56373ee7088dd3015b928782d5e70dc5074e (patch) | |
| tree | 71bb96a6222548e3b5f1adb60a5245115be825e3 /drivers | |
| parent | 5bb09778e2196770d218e82904f15b558d9a1e50 (diff) | |
tg3: Migrate phy preprocessor defs to system defs
This patch changes to code to use some of the preprocessor
definitions from mii.h over its homegrown equivalents.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/tg3.c | 26 | ||||
| -rw-r--r-- | drivers/net/tg3.h | 8 |
2 files changed, 12 insertions, 22 deletions
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 7b1e2abf0cea..da5e9105b9f4 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -861,7 +861,7 @@ static int tg3_writephy(struct tg3 *tp, int reg, u32 val) int ret; if ((tp->phy_flags & TG3_PHYFLG_IS_FET) && - (reg == MII_TG3_CTRL || reg == MII_TG3_AUX_CTRL)) + (reg == MII_CTRL1000 || reg == MII_TG3_AUX_CTRL)) return 0; if ((tp->mi_mode & MAC_MI_MODE_AUTO_POLL) != 0) { @@ -1981,15 +1981,14 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp) /* Set full-duplex, 1000 mbps. */ tg3_writephy(tp, MII_BMCR, - BMCR_FULLDPLX | TG3_BMCR_SPEED1000); + BMCR_FULLDPLX | BMCR_SPEED1000); /* Set to master mode. */ - if (tg3_readphy(tp, MII_TG3_CTRL, &phy9_orig)) + if (tg3_readphy(tp, MII_CTRL1000, &phy9_orig)) continue; - tg3_writephy(tp, MII_TG3_CTRL, - (MII_TG3_CTRL_AS_MASTER | - MII_TG3_CTRL_ENABLE_AS_MASTER)); + tg3_writephy(tp, MII_CTRL1000, + CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER); err = TG3_PHY_AUXCTL_SMDSP_ENABLE(tp); if (err) @@ -2014,7 +2013,7 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp) TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); - tg3_writephy(tp, MII_TG3_CTRL, phy9_orig); + tg3_writephy(tp, MII_CTRL1000, phy9_orig); if (!tg3_readphy(tp, MII_TG3_EXT_CTRL, ®32)) { reg32 &= ~0x3000; @@ -2958,16 +2957,15 @@ static int tg3_phy_autoneg_cfg(struct tg3 *tp, u32 advertise, u32 flowctrl) new_adv = 0; if (advertise & ADVERTISED_1000baseT_Half) - new_adv |= MII_TG3_CTRL_ADV_1000_HALF; + new_adv |= ADVERTISE_1000HALF; if (advertise & ADVERTISED_1000baseT_Full) - new_adv |= MII_TG3_CTRL_ADV_1000_FULL; + new_adv |= ADVERTISE_1000FULL; if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0 || tp->pci_chip_rev_id == CHIPREV_ID_5701_B0) - new_adv |= (MII_TG3_CTRL_AS_MASTER | - MII_TG3_CTRL_ENABLE_AS_MASTER); + new_adv |= CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER; - err = tg3_writephy(tp, MII_TG3_CTRL, new_adv); + err = tg3_writephy(tp, MII_CTRL1000, new_adv); if (err) goto done; @@ -3076,7 +3074,7 @@ static void tg3_phy_copper_begin(struct tg3 *tp) break; case SPEED_1000: - bmcr |= TG3_BMCR_SPEED1000; + bmcr |= BMCR_SPEED1000; break; } @@ -3153,7 +3151,7 @@ static int tg3_copper_is_advertising_all(struct tg3 *tp, u32 mask) if (mask & ADVERTISED_1000baseT_Full) all_mask |= ADVERTISE_1000FULL; - if (tg3_readphy(tp, MII_TG3_CTRL, &tg3_ctrl)) + if (tg3_readphy(tp, MII_CTRL1000, &tg3_ctrl)) return 0; if ((tg3_ctrl & all_mask) != all_mask) diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 54441a346cb3..bedc3b4557b5 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2152,14 +2152,6 @@ /*** Tigon3 specific PHY MII registers. ***/ -#define TG3_BMCR_SPEED1000 0x0040 - -#define MII_TG3_CTRL 0x09 /* 1000-baseT control register */ -#define MII_TG3_CTRL_ADV_1000_HALF 0x0100 -#define MII_TG3_CTRL_ADV_1000_FULL 0x0200 -#define MII_TG3_CTRL_AS_MASTER 0x0800 -#define MII_TG3_CTRL_ENABLE_AS_MASTER 0x1000 - #define MII_TG3_MMD_CTRL 0x0d /* MMD Access Control register */ #define MII_TG3_MMD_CTRL_DATA_NOINC 0x4000 #define MII_TG3_MMD_ADDRESS 0x0e /* MMD Address Data register */ |