Merge tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.3 kernel cycle:

  Core changes:

   - Device links can optionally be added between a pin control producer
     and its consumers. This will affect how the system power management
     is handled: a pin controller will not suspend before all of its
     consumers have been suspended.

     This was necessary for the ST Microelectronics STMFX expander and
     need to be tested on other systems as well: it makes sense to make
     this default in the long run.

     Right now it is opt-in per driver.

   - Drive strength can be specified in microamps. With decreases in
     silicon technology, milliamps isn't granular enough, let's make it
     possible to select drive strengths in microamps.

     Right now the Meson (AMlogic) driver needs this.

  New drivers:

   - New subdriver for the Tegra 194 SoC.

   - New subdriver for the Qualcomm SDM845.

   - New subdriver for the Qualcomm SM8150.

   - New subdriver for the Freescale i.MX8MN (Freescale is now a product
     line of NXP).

   - New subdriver for Marvell MV98DX1135.

  Driver improvements:

   - The Bitmain BM1880 driver now supports pin config in addition to
     muxing.

   - The Qualcomm drivers can now reserve some GPIOs as taken aside and
     not usable for users. This is used in ACPI systems to take out some
     GPIO lines used by the BIOS so that noone else (neither kernel nor
     userspace) will play with them by mistake and crash the machine.

   - A slew of refurbishing around the Aspeed drivers (board management
     controllers for servers) in preparation for the new Aspeed AST2600
     SoC.

   - A slew of improvements over the SH PFC drivers as usual.

   - Misc cleanups and fixes"

* tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits)
  pinctrl: aspeed: Strip moved macros and structs from private header
  pinctrl: aspeed: Fix missed include
  pinctrl: baytrail: Use GENMASK() consistently
  pinctrl: baytrail: Re-use data structures from pinctrl-intel.h
  pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux()
  pinctrl: qcom: Add SM8150 pinctrl driver
  dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding
  dt-bindings: pinctrl: qcom: Document missing gpio nodes
  pinctrl: aspeed: Add implementation-related documentation
  pinctrl: aspeed: Split out pinmux from general pinctrl
  pinctrl: aspeed: Clarify comment about strapping W1C
  pinctrl: aspeed: Correct comment that is no longer true
  MAINTAINERS: Add entry for ASPEED pinctrl drivers
  dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema
  dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema
  dt-bindings: pinctrl: aspeed: Split bindings document in two
  pinctrl: qcom: Add irq_enable callback for msm gpio
  pinctrl: madera: Fixup SPDX headers
  pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard
  pinctrl: tegra: Add bitmask support for parked bits
  ...

5 files changed, 20 insertions, 35 deletions

diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index 6f260c1d3467..6aeb711f7cd1 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -11,6 +11,12 @@
 #ifndef __LINUX_PINCTRL_PINCONF_GENERIC_H
 #define __LINUX_PINCTRL_PINCONF_GENERIC_H
 
+#include <linux/device.h>
+#include <linux/pinctrl/machine.h>
+
+struct pinctrl_dev;
+struct pinctrl_map;
+
 /**
  * enum pin_config_param - possible pin configuration parameters
  * @PIN_CONFIG_BIAS_BUS_HOLD: the pin will be set to weakly latch so that it
@@ -54,6 +60,8 @@
  *	push-pull mode, the argument is ignored.
  * @PIN_CONFIG_DRIVE_STRENGTH: the pin will sink or source at most the current
  *	passed as argument. The argument is in mA.
+ * @PIN_CONFIG_DRIVE_STRENGTH_UA: the pin will sink or source at most the current
+ *	passed as argument. The argument is in uA.
  * @PIN_CONFIG_INPUT_DEBOUNCE: this will configure the pin to debounce mode,
  *	which means it will wait for signals to settle when reading inputs. The
  *	argument gives the debounce time in usecs. Setting the
@@ -111,6 +119,7 @@ enum pin_config_param {
 	PIN_CONFIG_DRIVE_OPEN_SOURCE,
 	PIN_CONFIG_DRIVE_PUSH_PULL,
 	PIN_CONFIG_DRIVE_STRENGTH,
+	PIN_CONFIG_DRIVE_STRENGTH_UA,
 	PIN_CONFIG_INPUT_DEBOUNCE,
 	PIN_CONFIG_INPUT_ENABLE,
 	PIN_CONFIG_INPUT_SCHMITT,
@@ -155,9 +164,6 @@ static inline unsigned long pinconf_to_config_packed(enum pin_config_param param
 	return PIN_CONF_PACKED(param, argument);
 }
 
-#ifdef CONFIG_GENERIC_PINCONF
-
-#ifdef CONFIG_DEBUG_FS
 #define PCONFDUMP(a, b, c, d) {					\
 	.param = a, .display = b, .format = c, .has_arg = d	\
 	}
@@ -168,14 +174,6 @@ struct pin_config_item {
 	const char * const format;
 	bool has_arg;
 };
-#endif /* CONFIG_DEBUG_FS */
-
-#ifdef CONFIG_OF
-
-#include <linux/device.h>
-#include <linux/pinctrl/machine.h>
-struct pinctrl_dev;
-struct pinctrl_map;
 
 struct pinconf_generic_params {
 	const char * const property;
@@ -220,8 +218,5 @@ static inline int pinconf_generic_dt_node_to_map_all(
 	return pinconf_generic_dt_node_to_map(pctldev, np_config, map, num_maps,
 			PIN_MAP_TYPE_INVALID);
 }
-#endif
-
-#endif /* CONFIG_GENERIC_PINCONF */
 
 #endif /* __LINUX_PINCTRL_PINCONF_GENERIC_H */
diff --git a/include/linux/pinctrl/pinconf.h b/include/linux/pinctrl/pinconf.h
index 514414a5ad01..f8a8215e9021 100644
--- a/include/linux/pinctrl/pinconf.h
+++ b/include/linux/pinctrl/pinconf.h
@@ -11,7 +11,7 @@
 #ifndef __LINUX_PINCTRL_PINCONF_H
 #define __LINUX_PINCTRL_PINCONF_H
 
-#ifdef CONFIG_PINCONF
+#include <linux/types.h>
 
 struct pinctrl_dev;
 struct seq_file;
@@ -64,6 +64,4 @@ struct pinconf_ops {
 					    unsigned long config);
 };
 
-#endif
-
 #endif /* __LINUX_PINCTRL_PINCONF_H */
diff --git a/include/linux/pinctrl/pinctrl-state.h b/include/linux/pinctrl/pinctrl-state.h
index a0e785815a64..635d97e9285e 100644
--- a/include/linux/pinctrl/pinctrl-state.h
+++ b/include/linux/pinctrl/pinctrl-state.h
@@ -3,6 +3,9 @@
  * Standard pin control state definitions
  */
 
+#ifndef __LINUX_PINCTRL_PINCTRL_STATE_H
+#define __LINUX_PINCTRL_PINCTRL_STATE_H
+
 /**
  * @PINCTRL_STATE_DEFAULT: the state the pinctrl handle shall be put
  *	into as default, usually this means the pins are up and ready to
@@ -31,3 +34,5 @@
 #define PINCTRL_STATE_INIT "init"
 #define PINCTRL_STATE_IDLE "idle"
 #define PINCTRL_STATE_SLEEP "sleep"
+
+#endif /* __LINUX_PINCTRL_PINCTRL_STATE_H */
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
index e429e5d92dd6..7ce23450a1cb 100644
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@@ -11,8 +11,6 @@
 #ifndef __LINUX_PINCTRL_PINCTRL_H
 #define __LINUX_PINCTRL_PINCTRL_H
 
-#ifdef CONFIG_PINCTRL
-
 #include <linux/radix-tree.h>
 #include <linux/list.h>
 #include <linux/seq_file.h>
@@ -124,6 +122,10 @@ struct pinctrl_ops {
  *	the hardware description
  * @custom_conf_items: Information how to print @params in debugfs, must be
  *	the same size as the @custom_params, i.e. @num_custom_params
+ * @link_consumers: If true create a device link between pinctrl and its
+ *	consumers (i.e. the devices requesting pin control states). This is
+ *	sometimes necessary to ascertain the right suspend/resume order for
+ *	example.
  */
 struct pinctrl_desc {
 	const char *name;
@@ -138,6 +140,7 @@ struct pinctrl_desc {
 	const struct pinconf_generic_params *custom_params;
 	const struct pin_config_item *custom_conf_items;
 #endif
+	bool link_consumers;
 };
 
 /* External interface to pin controller */
@@ -166,7 +169,6 @@ extern struct pinctrl_dev *devm_pinctrl_register(struct device *dev,
 extern void devm_pinctrl_unregister(struct device *dev,
 				struct pinctrl_dev *pctldev);
 
-extern bool pin_is_valid(struct pinctrl_dev *pctldev, int pin);
 extern void pinctrl_add_gpio_range(struct pinctrl_dev *pctldev,
 				struct pinctrl_gpio_range *range);
 extern void pinctrl_add_gpio_ranges(struct pinctrl_dev *pctldev,
@@ -197,16 +199,5 @@ struct pinctrl_dev *of_pinctrl_get(struct device_node *np)
 extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev);
 extern const char *pinctrl_dev_get_devname(struct pinctrl_dev *pctldev);
 extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev);
-#else
-
-struct pinctrl_dev;
-
-/* Sufficiently stupid default functions when pinctrl is not in use */
-static inline bool pin_is_valid(struct pinctrl_dev *pctldev, int pin)
-{
-	return pin >= 0;
-}
-
-#endif /* !CONFIG_PINCTRL */
 
 #endif /* __LINUX_PINCTRL_PINCTRL_H */
diff --git a/include/linux/pinctrl/pinmux.h b/include/linux/pinctrl/pinmux.h
index e873ed97d79e..9a647fa5c8f1 100644
--- a/include/linux/pinctrl/pinmux.h
+++ b/include/linux/pinctrl/pinmux.h
@@ -15,8 +15,6 @@
 #include <linux/seq_file.h>
 #include <linux/pinctrl/pinctrl.h>
 
-#ifdef CONFIG_PINMUX
-
 struct pinctrl_dev;
 
 /**
@@ -84,6 +82,4 @@ struct pinmux_ops {
 	bool strict;
 };
 
-#endif /* CONFIG_PINMUX */
-
 #endif /* __LINUX_PINCTRL_PINMUX_H */