diff options
89 files changed, 2429 insertions, 636 deletions
diff --git a/Documentation/ABI/testing/dell-smbios-wmi b/Documentation/ABI/testing/dell-smbios-wmi index 5f3a0dc67050..f58229084469 100644 --- a/Documentation/ABI/testing/dell-smbios-wmi +++ b/Documentation/ABI/testing/dell-smbios-wmi @@ -1,7 +1,7 @@ What: /dev/wmi/dell-smbios Date: November 2017 KernelVersion: 4.15 -Contact: "Mario Limonciello" <mario.limonciello@dell.com> +Contact: Dell.Client.Kernel@dell.com Description: Perform SMBIOS calls on supported Dell machines. through the Dell ACPI-WMI interface. diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt index 95c21d6c9a84..b7e87f6c7d47 100644 --- a/Documentation/ABI/testing/sysfs-bus-thunderbolt +++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt @@ -232,7 +232,7 @@ Description: When new NVM image is written to the non-active NVM What: /sys/bus/thunderbolt/devices/.../nvm_authenticate_on_disconnect Date: Oct 2020 KernelVersion: v5.9 -Contact: Mario Limonciello <mario.limonciello@dell.com> +Contact: Mario Limonciello <mario.limonciello@outlook.com> Description: For supported devices, automatically authenticate the new Thunderbolt image when the device is disconnected from the host system. diff --git a/Documentation/ABI/testing/sysfs-class-firmware-attributes b/Documentation/ABI/testing/sysfs-class-firmware-attributes index 3348bf80a37c..90fdf935aa5e 100644 --- a/Documentation/ABI/testing/sysfs-class-firmware-attributes +++ b/Documentation/ABI/testing/sysfs-class-firmware-attributes @@ -2,8 +2,8 @@ What: /sys/class/firmware-attributes/*/attributes/*/ Date: February 2021 KernelVersion: 5.11 Contact: Divya Bharathi <Divya.Bharathi@Dell.com>, - Mario Limonciello <mario.limonciello@dell.com>, Prasanth KSR <prasanth.ksr@dell.com> + Dell.Client.Kernel@dell.com Description: A sysfs interface for systems management software to enable configuration capability on supported systems. This directory @@ -130,8 +130,8 @@ What: /sys/class/firmware-attributes/*/authentication/ Date: February 2021 KernelVersion: 5.11 Contact: Divya Bharathi <Divya.Bharathi@Dell.com>, - Mario Limonciello <mario.limonciello@dell.com>, Prasanth KSR <prasanth.ksr@dell.com> + Dell.Client.Kernel@dell.com Description: Devices support various authentication mechanisms which can be exposed as a separate configuration object. @@ -220,8 +220,8 @@ What: /sys/class/firmware-attributes/*/attributes/pending_reboot Date: February 2021 KernelVersion: 5.11 Contact: Divya Bharathi <Divya.Bharathi@Dell.com>, - Mario Limonciello <mario.limonciello@dell.com>, Prasanth KSR <prasanth.ksr@dell.com> + Dell.Client.Kernel@dell.com Description: A read-only attribute reads 1 if a reboot is necessary to apply pending BIOS attribute changes. Also, an uevent_KOBJ_CHANGE is @@ -249,8 +249,8 @@ What: /sys/class/firmware-attributes/*/attributes/reset_bios Date: February 2021 KernelVersion: 5.11 Contact: Divya Bharathi <Divya.Bharathi@Dell.com>, - Mario Limonciello <mario.limonciello@dell.com>, Prasanth KSR <prasanth.ksr@dell.com> + Dell.Client.Kernel@dell.com Description: This attribute can be used to reset the BIOS Configuration. Specifically, it tells which type of reset BIOS configuration is being @@ -272,3 +272,14 @@ Description: Note that any changes to this attribute requires a reboot for changes to take effect. + +What: /sys/class/firmware-attributes/*/attributes/debug_cmd +Date: July 2021 +KernelVersion: 5.14 +Contact: Mark Pearson <markpearson@lenovo.com> +Description: + This write only attribute can be used to send debug commands to the BIOS. + This should only be used when recommended by the BIOS vendor. Vendors may + use it to enable extra debug attributes or BIOS features for testing purposes. + + Note that any changes to this attribute requires a reboot for changes to take effect. diff --git a/Documentation/ABI/testing/sysfs-driver-intc_sar b/Documentation/ABI/testing/sysfs-driver-intc_sar new file mode 100644 index 000000000000..ec334b0e5ed9 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-intc_sar @@ -0,0 +1,54 @@ +What: /sys/bus/platform/devices/INTC1092:00/intc_reg +Date: August 2021 +KernelVersion: 5.15 +Contact: Shravan S <s.shravan@intel.com>, + An Sudhakar <sudhakar.an@intel.com> +Description: + Specific Absorption Rate (SAR) regulatory mode is typically + derived based on information like mcc (Mobile Country Code) and + mnc (Mobile Network Code) that is available for the currently + attached LTE network. A userspace application is required to set + the current SAR regulatory mode on the Dynamic SAR driver using + this sysfs node. Such an application can also read back using + this sysfs node, the currently configured regulatory mode value + from the Dynamic SAR driver. + + Acceptable regulatory modes are: + == ==== + 0 FCC + 1 CE + 2 ISED + == ==== + + - The regulatory mode value has one of the above values. + - The default regulatory mode used in the driver is 0. + +What: /sys/bus/platform/devices/INTC1092:00/intc_data +Date: August 2021 +KernelVersion: 5.15 +Contact: Shravan S <s.shravan@intel.com>, + An Sudhakar <sudhakar.an@intel.com> +Description: + This sysfs entry is used to retrieve Dynamic SAR information + emitted/maintained by a BIOS that supports Dynamic SAR. + + The retrieved information is in the order given below: + - device_mode + - bandtable_index + - antennatable_index + - sartable_index + + The above information is sent as integer values separated + by a single space. This information can then be pushed to a + WWAN modem that uses this to control the transmit signal + level using the Band/Antenna/SAR table index information. + These parameters are derived/decided by aggregating + device-mode like laptop/tablet/clamshell etc. and the + proximity-sensor data available to the embedded controller on + given host. The regulatory mode configured on Dynamic SAR + driver also influences these values. + + The userspace applications can poll for changes to this file + using POLLPRI event on file-descriptor (fd) obtained by opening + this sysfs entry. Application can then read this information from + the sysfs node and consume the given information. diff --git a/Documentation/ABI/testing/sysfs-platform-dell-smbios b/Documentation/ABI/testing/sysfs-platform-dell-smbios index e6e0f7f834a7..5583da581025 100644 --- a/Documentation/ABI/testing/sysfs-platform-dell-smbios +++ b/Documentation/ABI/testing/sysfs-platform-dell-smbios @@ -1,7 +1,7 @@ What: /sys/devices/platform/<platform>/tokens/* Date: November 2017 KernelVersion: 4.15 -Contact: "Mario Limonciello" <mario.limonciello@dell.com> +Contact: Dell.Client.Kernel@dell.com Description: A read-only description of Dell platform tokens available on the machine. diff --git a/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt b/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt index e19144fd5d86..fd3a7ec79760 100644 --- a/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt +++ b/Documentation/ABI/testing/sysfs-platform-intel-wmi-thunderbolt @@ -1,7 +1,7 @@ What: /sys/devices/platform/<platform>/force_power Date: September 2017 KernelVersion: 4.15 -Contact: "Mario Limonciello" <mario.limonciello@dell.com> +Contact: "Mario Limonciello" <mario.limonciello@outlook.com> Description: Modify the platform force power state, influencing Thunderbolt controllers to turn on or off when no diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power index 51c0f578bfce..90ec4987074b 100644 --- a/Documentation/ABI/testing/sysfs-power +++ b/Documentation/ABI/testing/sysfs-power @@ -295,7 +295,7 @@ Description: What: /sys/power/resume_offset Date: April 2018 -Contact: Mario Limonciello <mario.limonciello@dell.com> +Contact: Mario Limonciello <mario.limonciello@outlook.com> Description: This file is used for telling the kernel an offset into a disk to use when hibernating the system such as with a swap file. diff --git a/Documentation/admin-guide/laptops/lg-laptop.rst b/Documentation/admin-guide/laptops/lg-laptop.rst index ce9b14671cb9..6fbe165dcd27 100644 --- a/Documentation/admin-guide/laptops/lg-laptop.rst +++ b/Documentation/admin-guide/laptops/lg-laptop.rst @@ -13,10 +13,8 @@ Hotkeys The following FN keys are ignored by the kernel without this driver: - FN-F1 (LG control panel) - Generates F15 -- FN-F5 (Touchpad toggle) - Generates F13 +- FN-F5 (Touchpad toggle) - Generates F21 - FN-F6 (Airplane mode) - Generates RFKILL -- FN-F8 (Keyboard backlight) - Generates F16. - This key also changes keyboard backlight mode. - FN-F9 (Reader mode) - Generates F14 The rest of the FN keys work without a need for a special driver. diff --git a/MAINTAINERS b/MAINTAINERS index 2c83051ebcf2..7afc0daa0fee 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9269,13 +9269,20 @@ INTEL ATOMISP2 DUMMY / POWER-MANAGEMENT DRIVER M: Hans de Goede <hdegoede@redhat.com> L: platform-driver-x86@vger.kernel.org S: Maintained -F: drivers/platform/x86/intel_atomisp2_pm.c +F: drivers/platform/x86/intel/atomisp2/pm.c INTEL ATOMISP2 LED DRIVER M: Hans de Goede <hdegoede@redhat.com> L: platform-driver-x86@vger.kernel.org S: Maintained -F: drivers/platform/x86/intel_atomisp2_led.c +F: drivers/platform/x86/intel/atomisp2/led.c + +INTEL BIOS SAR INT1092 DRIVER +M: Shravan S <s.shravan@intel.com> +M: Intel Corporation <linuxwwan@intel.com> +L: platform-driver-x86@vger.kernel.org +S: Maintained +F: drivers/platform/x86/intel/int1092/ INTEL BROXTON PMC DRIVER M: Mika Westerberg <mika.westerberg@linux.intel.com> @@ -9371,7 +9378,7 @@ INTEL HID EVENT DRIVER M: Alex Hung <alex.hung@canonical.com> L: platform-driver-x86@vger.kernel.org S: Maintained -F: drivers/platform/x86/intel-hid.c +F: drivers/platform/x86/intel/hid.c INTEL I/OAT DMA DRIVER M: Dave Jiang <dave.jiang@intel.com> @@ -9515,17 +9522,17 @@ F: include/linux/mfd/intel-m10-bmc.h INTEL MENLOW THERMAL DRIVER M: Sujith Thomas <sujith.thomas@intel.com> -L: platform-driver-x86@vger.kernel.org +L: linux-pm@vger.kernel.org S: Supported W: https://01.org/linux-acpi -F: drivers/platform/x86/intel_menlow.c +F: drivers/thermal/intel/intel_menlow.c INTEL P-Unit IPC DRIVER M: Zha Qipeng <qipeng.zha@intel.com> L: platform-driver-x86@vger.kernel.org S: Maintained F: arch/x86/include/asm/intel_punit_ipc.h -F: drivers/platform/x86/intel_punit_ipc.c +F: drivers/platform/x86/intel/punit_ipc.c INTEL PMC CORE DRIVER M: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> @@ -9533,7 +9540,7 @@ M: David E Box <david.e.box@intel.com> L: platform-driver-x86@vger.kernel.org S: Maintained F: Documentation/ABI/testing/sysfs-platform-intel-pmc -F: drivers/platform/x86/intel_pmc_core* +F: drivers/platform/x86/intel/pmc/ INTEL PMIC GPIO DRIVERS M: Andy Shevchenko <andy@kernel.org> @@ -9551,7 +9558,7 @@ INTEL PMT DRIVER M: "David E. Box" <david.e.box@linux.intel.com> S: Maintained F: drivers/mfd/intel_pmt.c -F: drivers/platform/x86/intel_pmt_* +F: drivers/platform/x86/intel/pmt/ INTEL PRO/WIRELESS 2100, 2200BG, 2915ABG NETWORK CONNECTION SUPPORT M: Stanislav Yakovlev <stas.yakovlev@gmail.com> @@ -9588,7 +9595,7 @@ INTEL SPEED SELECT TECHNOLOGY M: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> L: platform-driver-x86@vger.kernel.org S: Maintained -F: drivers/platform/x86/intel_speed_select_if/ +F: drivers/platform/x86/intel/speed_select_if/ F: include/uapi/linux/isst_if.h F: tools/power/x86/intel-speed-select/ @@ -9609,19 +9616,19 @@ M: "David E. Box" <david.e.box@linux.intel.com> L: platform-driver-x86@vger.kernel.org S: Maintained F: arch/x86/include/asm/intel_telemetry.h -F: drivers/platform/x86/intel_telemetry* +F: drivers/platform/x86/intel/telemetry/ INTEL UNCORE FREQUENCY CONTROL M: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> L: platform-driver-x86@vger.kernel.org S: Maintained -F: drivers/platform/x86/intel-uncore-frequency.c +F: drivers/platform/x86/intel/uncore-frequency.c INTEL VIRTUAL BUTTON DRIVER M: AceLan Kao <acelan.kao@canonical.com> L: platform-driver-x86@vger.kernel.org S: Maintained -F: drivers/platform/x86/intel-vbtn.c +F: drivers/platform/x86/intel/vbtn.c INTEL WIRELESS 3945ABG/BG, 4965AGN (iwlegacy) M: Stanislaw Gruszka <stf_xl@wp.pl> @@ -9642,12 +9649,12 @@ M: Jithu Joseph <jithu.joseph@intel.com> R: Maurice Ma <maurice.ma@intel.com> S: Maintained W: https://slimbootloader.github.io/security/firmware-update.html -F: drivers/platform/x86/intel-wmi-sbl-fw-update.c +F: drivers/platform/x86/intel/wmi/sbl-fw-update.c INTEL WMI THUNDERBOLT FORCE POWER DRIVER L: Dell.Client.Kernel@dell.com S: Maintained -F: drivers/platform/x86/intel-wmi-thunderbolt.c +F: drivers/platform/x86/intel/wmi/thunderbolt.c INTEL WWAN IOSM DRIVER M: M Chetan Kumar <m.chetan.kumar@intel.com> diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c index 6f0aa0ed3241..aaeeacc12121 100644 --- a/drivers/i2c/i2c-core-acpi.c +++ b/drivers/i2c/i2c-core-acpi.c @@ -69,6 +69,38 @@ bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares, } EXPORT_SYMBOL_GPL(i2c_acpi_get_i2c_resource); +static int i2c_acpi_resource_count(struct acpi_resource *ares, void *data) +{ + struct acpi_resource_i2c_serialbus *sb; + int *count = data; + + if (i2c_acpi_get_i2c_resource(ares, &sb)) + *count = *count + 1; + + return 1; +} + +/** + * i2c_acpi_client_count - Count the number of I2cSerialBus resources + * @adev: ACPI device + * + * Returns the number of I2cSerialBus resources in the ACPI-device's + * resource-list; or a negative error code. + */ +int i2c_acpi_client_count(struct acpi_device *adev) +{ + int ret, count = 0; + LIST_HEAD(r); + + ret = acpi_dev_get_resources(adev, &r, i2c_acpi_resource_count, &count); + if (ret < 0) + return ret; + + acpi_dev_free_resource_list(&r); + return count; +} +EXPORT_SYMBOL_GPL(i2c_acpi_client_count); + static int i2c_acpi_fill_info(struct acpi_resource *ares, void *data) { struct i2c_acpi_lookup *lookup = data; diff --git a/drivers/misc/lis3lv02d/lis3lv02d.h b/drivers/misc/lis3lv02d/lis3lv02d.h index 7ac788fae1b8..c394c0b08519 100644 --- a/drivers/misc/lis3lv02d/lis3lv02d.h +++ b/drivers/misc/lis3lv02d/lis3lv02d.h @@ -271,7 +271,6 @@ struct lis3lv02d { int regs_size; u8 *reg_cache; bool regs_stored; - bool init_required; u8 odr_mask; /* ODR bit mask */ u8 whoami; /* indicates measurement precision */ s16 (*read_data) (struct lis3lv02d *lis3, int reg); diff --git a/drivers/platform/mellanox/mlxbf-pmc.c b/drivers/platform/mellanox/mlxbf-pmc.c index 35883984251f..04bc3b50aa7a 100644 --- a/drivers/platform/mellanox/mlxbf-pmc.c +++ b/drivers/platform/mellanox/mlxbf-pmc.c @@ -79,7 +79,8 @@ #define MLXBF_PMC_L3C_PERF_CNT_HIGH_VAL GENMASK(24, 0) /** - * Structure to hold attribute and block info for each sysfs entry + * struct mlxbf_pmc_attribute - Structure to hold attribute and block info + * for each sysfs entry * @dev_attr: Device attribute struct * @index: index to identify counter number within a block * @nr: block number to which the sysfs belongs @@ -91,7 +92,7 @@ struct mlxbf_pmc_attribute { }; /** - * Structure to hold info for each HW block + * struct mlxbf_pmc_block_info - Structure to hold info for each HW block * * @mmio_base: The VA at which the PMC block is mapped * @blk_size: Size of each mapped region @@ -102,7 +103,7 @@ struct mlxbf_pmc_attribute { * @attr_event_list: Attributes for "event_list" sysfs files * @attr_enable: Attributes for "enable" sysfs files * @block_attr: All attributes needed for the block - * @blcok_attr_grp: Attribute group for the block + * @block_attr_grp: Attribute group for the block */ struct mlxbf_pmc_block_info { void __iomem *mmio_base; @@ -118,7 +119,7 @@ struct mlxbf_pmc_block_info { }; /** - * Structure to hold PMC context info + * struct mlxbf_pmc_context - Structure to hold PMC context info * * @pdev: The kernel structure representing the device * @total_blocks: Total number of blocks @@ -127,7 +128,7 @@ struct mlxbf_pmc_block_info { * @block_name: Block name * @block: Block info * @groups: Attribute groups from each block - * @sv_sreg_support: Whether SMCs are used to access performance registers + * @svc_sreg_support: Whether SMCs are used to access performance registers * @sreg_tbl_perf: Secure register access table number * @event_set: Event set to use */ @@ -145,7 +146,7 @@ struct mlxbf_pmc_context { }; /** - * Structure to hold supported events for each block + * struct mlxbf_pmc_events - Structure to hold supported events for each block * @evt_num: Event number used to program counters * @evt_name: Name of the event */ diff --git a/drivers/platform/surface/aggregator/Makefile b/drivers/platform/surface/aggregator/Makefile index c8498c41e758..c0d550eda5cd 100644 --- a/drivers/platform/surface/aggregator/Makefile +++ b/drivers/platform/surface/aggregator/Makefile @@ -6,12 +6,9 @@ CFLAGS_core.o = -I$(src) obj-$(CONFIG_SURFACE_AGGREGATOR) += surface_aggregator.o -surface_aggregator-objs := core.o -surface_aggregator-objs += ssh_parser.o -surface_aggregator-objs += ssh_packet_layer.o -surface_aggregator-objs += ssh_request_layer.o -surface_aggregator-objs += controller.o - -ifeq ($(CONFIG_SURFACE_AGGREGATOR_BUS),y) -surface_aggregator-objs += bus.o -endif +surface_aggregator-y := core.o +surface_aggregator-y += ssh_parser.o +surface_aggregator-y += ssh_packet_layer.o +surface_aggregator-y += ssh_request_layer.o +surface_aggregator-$(CONFIG_SURFACE_AGGREGATOR_BUS) += bus.o +surface_aggregator-y += controller.o diff --git a/drivers/platform/surface/surface3_power.c b/drivers/platform/surface/surface3_power.c index dea82aa1abd4..90c1568ea4e0 100644 --- a/drivers/platform/surface/surface3_power.c +++ b/drivers/platform/surface/surface3_power.c @@ -384,13 +384,7 @@ mshw0011_space_handler(u32 function, acpi_physical_address command, if (ACPI_FAILURE(ret)) return ret; - if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) { - ret = AE_BAD_PARAMETER; - goto err; - } - - sb = &ares->data.i2c_serial_bus; - if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) { + if (!value64 || !i2c_acpi_get_i2c_resource(ares, &sb)) { ret = AE_BAD_PARAMETER; goto err; } diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index d12db6c316ea..e21ea3d23e6f 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -77,28 +77,6 @@ config UV_SYSFS To compile this driver as a module, choose M here: the module will be called uv_sysfs. -config INTEL_WMI_SBL_FW_UPDATE - tristate "Intel WMI Slim Bootloader firmware update signaling driver" - depends on ACPI_WMI - help - Say Y here if you want to be able to use the WMI interface to signal - Slim Bootloader to trigger update on next reboot. - - To compile this driver as a module, choose M here: the module will - be called intel-wmi-sbl-fw-update. - -config INTEL_WMI_THUNDERBOLT - tristate "Intel WMI thunderbolt force power driver" - depends on ACPI_WMI - help - Say Y here if you want to be able to use the WMI interface on select - systems to force the power control of Intel Thunderbolt controllers. - This is useful for updating the firmware when devices are not plugged - into the controller. - - To compile this driver as a module, choose M here: the module will - be called intel-wmi-thunderbolt. - config MXM_WMI tristate "WMI support for MXM Laptop Graphics" depends on ACPI_WMI @@ -281,6 +259,7 @@ config ASUS_WMI select INPUT_SPARSEKMAP select LEDS_CLASS select NEW_LEDS + select ACPI_PLATFORM_PROFILE help Say Y here if you have a WMI aware Asus laptop (like Eee PCs or new Asus Notebooks). @@ -302,6 +281,19 @@ config ASUS_NB_WMI If you have an ACPI-WMI compatible Asus Notebook, say Y or M here. +config MERAKI_MX100 + tristate "Cisco Meraki MX100 Platform Driver" + depends on GPIOLIB + depends on GPIO_ICH + depends on LEDS_CLASS + select LEDS_GPIO + help + This driver provides support for the front button and LEDs on + the Cisco Meraki MX100 (Tinkerbell) 1U appliance. + + To compile this driver as a module, choose M here: the module + will be called meraki-mx100. + config EEEPC_LAPTOP tristate "Eee PC Hotkey Driver" depends on ACPI @@ -654,105 +646,6 @@ config THINKPAD_LMI source "drivers/platform/x86/intel/Kconfig" -config INTEL_ATOMISP2_LED - tristate "Intel AtomISP2 camera LED driver" - depends on GPIOLIB && LEDS_GPIO - help - Many Bay Trail and Cherry Trail devices come with a camera attached - to Intel's Image Signal Processor. Linux currently does not have a - driver for these, so they do not work as a camera. Some of these - camera's have a LED which is controlled through a GPIO. - - Some of these devices have a firmware issue where the LED gets turned - on at boot. This driver will turn the LED off at boot and also allows - controlling the LED (repurposing it) through the sysfs LED interface. - - Which GPIO is attached to the LED is usually not described in the - ACPI tables, so this driver contains per-system info about the GPIO - inside the driver, this means that this driver only works on systems - the driver knows about. - - To compile this driver as a module, choose M here: the module - will be called intel_atomisp2_led. - -config INTEL_ATOMISP2_PM - tristate "Intel AtomISP2 dummy / power-management driver" - depends on PCI && IOSF_MBI && PM - depends on !INTEL_ATOMISP - help - Power-management driver for Intel's Image Signal Processor found on - Bay Trail and Cherry Trail devices. This dummy driver's sole purpose - is to turn the ISP off (put it in D3) to save power and to allow - entering of S0ix modes. - - To compile this driver as a module, choose M here: the module - will be called intel_atomisp2_pm. - -config INTEL_HID_EVENT - tristate "INTEL HID Event" - depends on ACPI - depends on INPUT - depends on I2C - select INPUT_SPARSEKMAP - help - This driver provides support for the Intel HID Event hotkey interface. - Some laptops require this driver for hotkey support. - - To compile this driver as a module, choose M here: the module will - be called intel_hid. - -config INTEL_INT0002_VGPIO - tristate "Intel ACPI INT0002 Virtual GPIO driver" - depends on GPIOLIB && ACPI && PM_SLEEP - select GPIOLIB_IRQCHIP - help - Some peripherals on Bay Trail and Cherry Trail platforms signal a - Power Management Event (PME) to the Power Management Controller (PMC) - to wakeup the system. When this happens software needs to explicitly - clear the PME bus 0 status bit in the GPE0a_STS register to avoid an - IRQ storm on IRQ 9. - - This is modelled in ACPI through the INT0002 ACPI device, which is - called a "Virtual GPIO controller" in ACPI because it defines the - event handler to call when the PME triggers through _AEI and _L02 - methods as would be done for a real GPIO interrupt in ACPI. - - To compile this driver as a module, choose M here: the module will - be called intel_int0002_vgpio. - -config INTEL_MENLOW - tristate "Thermal Management driver for Intel menlow platform" - depends on ACPI_THERMAL - select THERMAL - help - ACPI thermal management enhancement driver on - Intel Menlow platform. - - If unsure, say N. - -config INTEL_OAKTRAIL - tristate "Intel Oaktrail Platform Extras" - depends on ACPI - depends on ACPI_VIDEO || ACPI_VIDEO = n - depends on RFKILL && BACKLIGHT_CLASS_DEVICE && ACPI - help - Intel Oaktrail platform need this driver to provide interfaces to - enable/disable the Camera, WiFi, BT etc. devices. If in doubt, say Y - here; it will only load on supported platforms. - -config INTEL_VBTN - tristate "INTEL VIRTUAL BUTTON" - depends on ACPI - depends on INPUT - depends on I2C - select INPUT_SPARSEKMAP - help - This driver provides support for the Intel Virtual Button interface. - Some laptops require this driver for power button support. - - To compile this driver as a module, choose M here: the module will - be called intel_vbtn. - config MSI_LAPTOP tristate "MSI Laptop Extras" depends on ACPI @@ -1106,150 +999,6 @@ config INTEL_IPS functionality. If in doubt, say Y here; it will only load on supported platforms. -config INTEL_RST - tristate "Intel Rapid Start Technology Driver" - depends on ACPI - help - This driver provides support for modifying parameters on systems - equipped with Intel's Rapid Start Technology. When put in an ACPI - sleep state, these devices will wake after either a configured - timeout or when the system battery reaches a critical state, - automatically copying memory contents to disk. On resume, the - firmware will copy the memory contents back to RAM and resume the OS - as usual. - -config INTEL_SMARTCONNECT - tristate "Intel Smart Connect disabling driver" - depends on ACPI - help - Intel Smart Connect is a technology intended to permit devices to - update state by resuming for a short period of time at regular - intervals. If a user enables this functionality under Windows and - then reboots into Linux, the system may remain configured to resume - on suspend. In the absence of any userspace to support it, the system - will then remain awake until something triggers another suspend. - - This driver checks to determine whether the device has Intel Smart - Connect enabled, and if so disables it. - -source "drivers/platform/x86/intel_speed_select_if/Kconfig" - -config INTEL_TURBO_MAX_3 - bool "Intel Turbo Boost Max Technology 3.0 enumeration driver" - depends on X86_64 && SCHED_MC_PRIO - help - This driver reads maximum performance ratio of each CPU and set up - the scheduler priority metrics. In this way scheduler can prefer - CPU with higher performance to schedule tasks. - This driver is only required when the system is not using Hardware - P-States (HWP). In HWP mode, priority can be read from ACPI tables. - -config INTEL_UNCORE_FREQ_CONTROL - tristate "Intel Uncore frequency control driver" - depends on X86_64 - help - This driver allows control of uncore frequency limits on - supported server platforms. - Uncore frequency controls RING/LLC (last-level cache) clocks. - - To compile this driver as a module, choose M here: the module - will be called intel-uncore-frequency. - -config INTEL_BXTWC_PMIC_TMU - tristate "Intel BXT Whiskey Cove TMU Driver" - depends on REGMAP - depends on MFD_INTEL_PMC_BXT - depends on INTEL_SOC_PMIC_BXTWC - help - Select this driver to use Intel BXT Whiskey Cove PMIC TMU feature. - This driver enables the alarm wakeup functionality in the TMU unit - of Whiskey Cove PMIC. - -config INTEL_CHTDC_TI_PWRBTN - tristate "Intel Cherry Trail Dollar Cove TI power button driver" - depends on INTEL_SOC_PMIC_CHTDC_TI - depends on INPUT - help - This option adds a power button driver driver for Dollar Cove TI - PMIC on Intel Cherry Trail devices. - - To compile this driver as a module, choose M here: the module - will be called intel_chtdc_ti_pwrbtn. - -config INTEL_MRFLD_PWRBTN - tristate "Intel Merrifield Basin Cove power button driver" - depends on INTEL_SOC_PMIC_MRFLD - depends on INPUT - help - This option adds a power button driver for Basin Cove PMIC - on Intel Merrifield devices. - - To compile this driver as a module, choose M here: the module - will be called intel_mrfld_pwrbtn. - -config INTEL_PMC_CORE - tristate "Intel PMC Core driver" - depends on PCI - depends on ACPI - help - The Intel Platform Controller Hub for Intel Core SoCs provides access - to Power Management Controller registers via various interfaces. This - driver can utilize debugging capabilities and supported features as - exposed by the Power Management Controller. It also may perform some - tasks in the PMC in order to enable transition into the SLPS0 state. - It should be selected on all Intel platforms supported by the driver. - - Supported features: - - SLP_S0_RESIDENCY counter - - PCH IP Power Gating status - - LTR Ignore / LTR Show - - MPHY/PLL gating status (Sunrisepoint PCH only) - - SLPS0 Debug registers (Cannonlake/Icelake PCH) - - Low Power Mode registers (Tigerlake and beyond) - - PMC quirks as needed to enable SLPS0/S0ix - -config INTEL_PMT_CLASS - tristate - help - The Intel Platform Monitoring Technology (PMT) class driver provides - the basic sysfs interface and file hierarchy used by PMT devices. - - For more information, see: - <file:Documentation/ABI/testing/sysfs-class-intel_pmt> - - To compile this driver as a module, choose M here: the module - will be called intel_pmt_class. - -config INTEL_PMT_TELEMETRY - tristate "Intel Platform Monitoring Technology (PMT) Telemetry driver" - depends on MFD_INTEL_PMT - select INTEL_PMT_CLASS - help - The Intel Platform Monitory Technology (PMT) Telemetry driver provides - access to hardware telemetry metrics on devices that support the - feature. - - To compile this driver as a module, choose M here: the module - will be called intel_pmt_telemetry. - -config INTEL_PMT_CRASHLOG - tristate "Intel Platform Monitoring Technology (PMT) Crashlog driver" - depends on MFD_INTEL_PMT - select INTEL_PMT_CLASS - help - The Intel Platform Monitoring Technology (PMT) crashlog driver provides - access to hardware crashlog capabilities on devices that support the - feature. - - To compile this driver as a module, choose M here: the module - will be called intel_pmt_crashlog. - -config INTEL_PUNIT_IPC - tristate "Intel P-Unit IPC Driver" - help - This driver provides support for Intel P-Unit Mailbox IPC mechanism, - which is used to bridge the communications between kernel and P-Unit. - config INTEL_SCU_IPC bool @@ -1297,18 +1046,6 @@ config INTEL_SCU_IPC_UTIL low level access for debug work and updating the firmware. Say N unless you will be doing this on an Intel MID platform. -config INTEL_TELEMETRY - tristate "Intel SoC Telemetry Driver" - depends on X86_64 - depends on MFD_INTEL_PMC_BXT - depends on INTEL_PUNIT_IPC - help - This driver provides interfaces to configure and use - telemetry for INTEL SoC from APL onwards. It is also - used to get various SoC events and parameters - directly via debugfs files. Various tools may use - this interface for SoC state monitoring. - endif # X86_PLATFORM_DEVICES config PMC_ATOM diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index 7ee369aab10d..69690e26bb6d 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -10,8 +10,6 @@ obj-$(CONFIG_WMI_BMOF) += wmi-bmof.o # WMI drivers obj-$(CONFIG_HUAWEI_WMI) += huawei-wmi.o -obj-$(CONFIG_INTEL_WMI_SBL_FW_UPDATE) += intel-wmi-sbl-fw-update.o -obj-$(CONFIG_INTEL_WMI_THUNDERBOLT) += intel-wmi-thunderbolt.o obj-$(CONFIG_MXM_WMI) += mxm-wmi.o obj-$(CONFIG_PEAQ_WMI) += peaq-wmi.o obj-$(CONFIG_XIAOMI_WMI) += xiaomi-wmi.o @@ -39,6 +37,9 @@ obj-$(CONFIG_ASUS_NB_WMI) += asus-nb-wmi.o obj-$(CONFIG_EEEPC_LAPTOP) += eeepc-laptop.o obj-$(CONFIG_EEEPC_WMI) += eeepc-wmi.o +# Cisco/Meraki +obj-$(CONFIG_MERAKI_MX100) += meraki-mx100.o + # Dell obj-$(CONFIG_X86_PLATFORM_DRIVERS_DELL) += dell/ @@ -68,14 +69,6 @@ obj-$(CONFIG_THINKPAD_LMI) += think-lmi.o # Intel obj-$(CONFIG_X86_PLATFORM_DRIVERS_INTEL) += intel/ -obj-$(CONFIG_INTEL_ATOMISP2_LED) += intel_atomisp2_led.o -obj-$(CONFIG_INTEL_ATOMISP2_PM) += intel_atomisp2_pm.o -obj-$(CONFIG_INTEL_HID_EVENT) += intel-hid.o -obj-$(CONFIG_INTEL_INT0002_VGPIO) += intel_int0002_vgpio.o -obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o -obj-$(CONFIG_INTEL_OAKTRAIL) += intel_oaktrail.o -obj-$(CONFIG_INTEL_VBTN) += intel-vbtn.o - # MSI obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o obj-$(CONFIG_MSI_WMI) += msi-wmi.o @@ -118,27 +111,11 @@ obj-$(CONFIG_WIRELESS_HOTKEY) += wireless-hotkey.o # Intel uncore drivers obj-$(CONFIG_INTEL_IPS) += intel_ips.o -obj-$(CONFIG_INTEL_RST) += intel-rst.o -obj-$(CONFIG_INTEL_SMARTCONNECT) += intel-smartconnect.o -obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += intel_speed_select_if/ -obj-$(CONFIG_INTEL_TURBO_MAX_3) += intel_turbo_max_3.o -obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL) += intel-uncore-frequency.o # Intel PMIC / PMC / P-Unit devices -obj-$(CONFIG_INTEL_BXTWC_PMIC_TMU) += intel_bxtwc_tmu.o -obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN) += intel_chtdc_ti_pwrbtn.o -obj-$(CONFIG_INTEL_MRFLD_PWRBTN) += intel_mrfld_pwrbtn.o -obj-$(CONFIG_INTEL_PMC_CORE) += intel_pmc_core.o intel_pmc_core_pltdrv.o -obj-$(CONFIG_INTEL_PMT_CLASS) += intel_pmt_class.o -obj-$(CONFIG_INTEL_PMT_TELEMETRY) += intel_pmt_telemetry.o -obj-$(CONFIG_INTEL_PMT_CRASHLOG) += intel_pmt_crashlog.o -obj-$(CONFIG_INTEL_PUNIT_IPC) += intel_punit_ipc.o obj-$(CONFIG_INTEL_SCU_IPC) += intel_scu_ipc.o obj-$(CONFIG_INTEL_SCU_PCI) += intel_scu_pcidrv.o obj-$(CONFIG_INTEL_SCU_PLATFORM) += intel_scu_pltdrv.o obj-$(CONFIG_INTEL_SCU_WDT) += intel_scu_wdt.o obj-$(CONFIG_INTEL_SCU_IPC_UTIL) += intel_scu_ipcutil.o -obj-$(CONFIG_INTEL_TELEMETRY) += intel_telemetry_core.o \ - intel_telemetry_pltdrv.o \ - intel_telemetry_debugfs.o obj-$(CONFIG_PMC_ATOM) += pmc_atom.o diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 85db9403cc14..694b45ed06a2 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -60,6 +60,11 @@ MODULE_LICENSE("GPL"); #define ACER_WMID_GET_THREEG_METHODID 10 #define ACER_WMID_SET_THREEG_METHODID 11 +#define ACER_WMID_SET_GAMING_LED_METHODID 2 +#define ACER_WMID_GET_GAMING_LED_METHODID 4 +#define ACER_WMID_SET_GAMING_FAN_BEHAVIOR 14 +#define ACER_WMID_SET_GAMING_MISC_SETTING_METHODID 22 + /* * Acer ACPI method GUIDs */ @@ -68,6 +73,7 @@ MODULE_LICENSE("GPL"); #define WMID_GUID1 "6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3" #define WMID_GUID2 "95764E09-FB56-4E83-B31A-37761F60994A" #define WMID_GUID3 "61EF69EA-865C-4BC3-A502-A0DEBA0CB531" +#define WMID_GUID4 "7A4DDFE7-5B5D-40B4-8595-4408E0CC7F56" /* * Acer ACPI event GUIDs @@ -81,6 +87,7 @@ MODULE_ALIAS("wmi:676AA15E-6A47-4D9F-A2CC-1E6D18D14026"); enum acer_wmi_event_ids { WMID_HOTKEY_EVENT = 0x1, WMID_ACCEL_OR_KBD_DOCK_EVENT = 0x5, + WMID_GAMING_TURBO_KEY_EVENT = 0x7, }; static const struct key_entry acer_wmi_keymap[] __initconst = { @@ -215,6 +222,9 @@ struct hotkey_function_type_aa { #define ACER_CAP_THREEG BIT(4) #define ACER_CAP_SET_FUNCTION_MODE BIT(5) #define ACER_CAP_KBD_DOCK BIT(6) +#define ACER_CAP_TURBO_OC BIT(7) +#define ACER_CAP_TURBO_LED BIT(8) +#define ACER_CAP_TURBO_FAN BIT(9) /* * Interface type flags @@ -301,6 +311,9 @@ struct quirk_entry { u8 mailled; s8 brightness; u8 bluetooth; + u8 turbo; + u8 cpu_fans; + u8 gpu_fans; }; static struct quirk_entry *quirks; @@ -312,6 +325,10 @@ static void __init set_quirks(void) if (quirks->brightness) interface->capability |= ACER_CAP_BRIGHTNESS; + + if (quirks->turbo) + interface->capability |= ACER_CAP_TURBO_OC | ACER_CAP_TURBO_LED + | ACER_CAP_TURBO_FAN; } static int __init dmi_matched(const struct dmi_system_id *dmi) @@ -340,6 +357,12 @@ static struct quirk_entry quirk_acer_travelmate_2490 = { .mailled = 1, }; +static struct quirk_entry quirk_acer_predator_ph315_53 = { + .turbo = 1, + .cpu_fans = 1, + .gpu_fans = 1, +}; + /* This AMW0 laptop has no bluetooth */ static struct quirk_entry quirk_medion_md_98300 = { .wireless = 1, @@ -508,6 +531,15 @@ static const struct dmi_system_id acer_quirks[] __initconst = { .driver_data = &quirk_acer_travelmate_2490, }, { + .callback = dmi_matched, + .ident = "Acer Predator PH315-53", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Predator PH315-53"), + }, + .driver_data = &quirk_acer_predator_ph315_53, + }, + { .callback = set_force_caps, .ident = "Acer Aspire Switch 10E SW3-016", .matches = { @@ -1345,6 +1377,114 @@ static struct wmi_interface wmid_v2_interface = { }; /* + * WMID Gaming interface + */ + +static acpi_status +WMI_gaming_execute_u64(u32 method_id, u64 in, u64 *out) +{ + struct acpi_buffer input = { (acpi_size) sizeof(u64), (void *)(&in) }; + struct acpi_buffer result = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj; + u32 tmp = 0; + acpi_status status; + + status = wmi_evaluate_method(WMID_GUID4, 0, method_id, &input, &result); + + if (ACPI_FAILURE(status)) + return status; + obj = (union acpi_object *) result.pointer; + + if (obj) { + if (obj->type == ACPI_TYPE_BUFFER) { + if (obj->buffer.length == sizeof(u32)) + tmp = *((u32 *) obj->buffer.pointer); + else if (obj->buffer.length == sizeof(u64)) + tmp = *((u64 *) obj->buffer.pointer); + } else if (obj->type == ACPI_TYPE_INTEGER) { + tmp = (u64) obj->integer.value; + } + } + + if (out) + *out = tmp; + + kfree(result.pointer); + + return status; +} + +static acpi_status WMID_gaming_set_u64(u64 value, u32 cap) +{ + u32 method_id = 0; + + if (!(interface->capability & cap)) + return AE_BAD_PARAMETER; + + switch (cap) { + case ACER_CAP_TURBO_LED: + method_id = ACER_WMID_SET_GAMING_LED_METHODID; + break; + case ACER_CAP_TURBO_FAN: + method_id = ACER_WMID_SET_GAMING_FAN_BEHAVIOR; + break; + case ACER_CAP_TURBO_OC: + method_id = ACER_WMID_SET_GAMING_MISC_SETTING_METHODID; + break; + default: + return AE_BAD_PARAMETER; + } + + return WMI_gaming_execute_u64(method_id, value, NULL); +} + +static acpi_status WMID_gaming_get_u64(u64 *value, u32 cap) +{ + acpi_status status; + u64 result; + u64 input; + u32 method_id; + + if (!(interface->capability & cap)) + return AE_BAD_PARAMETER; + + switch (cap) { + case ACER_CAP_TURBO_LED: + method_id = ACER_WMID_GET_GAMING_LED_METHODID; + input = 0x1; + break; + default: + return AE_BAD_PARAMETER; + } + status = WMI_gaming_execute_u64(method_id, input, &result); + if (ACPI_SUCCESS(status)) + *value = (u64) result; + + return status; +} + +static void WMID_gaming_set_fan_mode(u8 fan_mode) +{ + /* fan_mode = 1 is used for auto, fan_mode = 2 used for turbo*/ + u64 gpu_fan_config1 = 0, gpu_fan_config2 = 0; + int i; + + if (quirks->cpu_fans > 0) + gpu_fan_config2 |= 1; + for (i = 0; i < (quirks->cpu_fans + quirks->gpu_fans); ++i) + gpu_fan_config2 |= 1 << (i + 1); + for (i = 0; i < quirks->gpu_fans; ++i) + gpu_fan_config2 |= 1 << (i + 3); + if (quirks->cpu_fans > 0) + gpu_fan_config1 |= fan_mode; + for (i = 0; i < (quirks->cpu_fans + quirks->gpu_fans); ++i) + gpu_fan_config1 |= fan_mode << (2 * i + 2); + for (i = 0; i < quirks->gpu_fans; ++i) + gpu_fan_config1 |= fan_mode << (2 * i + 6); + WMID_gaming_set_u64(gpu_fan_config2 | gpu_fan_config1 << 16, ACER_CAP_TURBO_FAN); +} + +/* * Generic Device (interface-independent) */ @@ -1576,6 +1716,41 @@ static int acer_gsensor_event(void) } /* + * Predator series turbo button + */ +static int acer_toggle_turbo(void) +{ + u64 turbo_led_state; + + /* Get current state from turbo button */ + if (ACPI_FAILURE(WMID_gaming_get_u64(&turbo_led_state, ACER_CAP_TURBO_LED))) + return -1; + + if (turbo_led_state) { + /* Turn off turbo led */ + WMID_gaming_set_u64(0x1, ACER_CAP_TURBO_LED); + + /* Set FAN mode to auto */ + WMID_gaming_set_fan_mode(0x1); + + /* Set OC to normal */ + WMID_gaming_set_u64(0x5, ACER_CAP_TURBO_OC); + WMID_gaming_set_u64(0x7, ACER_CAP_TURBO_OC); + } else { + /* Turn on turbo led */ + WMID_gaming_set_u64(0x10001, ACER_CAP_TURBO_LED); + + /* Set FAN mode to turbo */ + WMID_gaming_set_fan_mode(0x2); + + /* Set OC to turbo mode */ + WMID_gaming_set_u64(0x205, ACER_CAP_TURBO_OC); + WMID_gaming_set_u64(0x207, ACER_CAP_TURBO_OC); + } + return turbo_led_state; +} + +/* * Switch series keyboard dock status */ static int acer_kbd_dock_state_to_sw_tablet_mode(u8 kbd_dock_state) @@ -1872,6 +2047,10 @@ static void acer_wmi_notify(u32 value, void *context) acer_gsensor_event(); acer_kbd_dock_event(&return_value); break; + case WMID_GAMING_TURBO_KEY_EVENT: + if (return_value.key_num == 0x4) + acer_toggle_turbo(); + break; default: pr_warn("Unknown function number - %d - %d\n", return_value.function, return_value.key_num); diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index ebaeb7bb80f5..e14fb5fa7324 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -26,6 +26,7 @@ #include <linux/rfkill.h> #include <linux/pci.h> #include <linux/pci_hotplug.h> +#include <linux/platform_profile.h> #include <linux/power_supply.h> #include <linux/hwmon.h> #include <linux/hwmon-sysfs.h> @@ -210,12 +211,24 @@ struct asus_wmi { u8 fan_boost_mode_mask; u8 fan_boost_mode; + bool egpu_enable_available; // 0 = enable + bool egpu_enable; + + bool dgpu_disable_available; + bool dgpu_disable; + bool throttle_thermal_policy_available; u8 throttle_thermal_policy_mode; + struct platform_profile_handler platform_profile_handler; + bool platform_profile_support; + // The RSOC controls the maximum charging percentage. bool battery_rsoc_available; + bool panel_overdrive_available; + bool panel_overdrive; + struct hotplug_slot hotplug_slot; struct mutex hotplug_lock; struct mutex wmi_lock; @@ -424,6 +437,181 @@ static void lid_flip_tablet_mode_get_state(struct asus_wmi *asus) } } +/* dGPU ********************************************************************/ +static int dgpu_disable_check_present(struct asus_wmi *asus) +{ + u32 result; + int err; + + asus->dgpu_disable_available = false; + + err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_DGPU, &result); + if (err) { + if (err == -ENODEV) + return 0; + return err; + } + + if (result & ASUS_WMI_DSTS_PRESENCE_BIT) { + asus->dgpu_disable_available = true; + asus->dgpu_disable = result & ASUS_WMI_DSTS_STATUS_BIT; + } + + return 0; +} + +static int dgpu_disable_write(struct asus_wmi *asus) +{ + u32 retval; + u8 value; + int err; + + /* Don't rely on type conversion */ + value = asus->dgpu_disable ? 1 : 0; + + err = asus_wmi_set_devstate(ASUS_WMI_DEVID_DGPU, value, &retval); + if (err) { + pr_warn("Failed to set dgpu disable: %d\n", err); + return err; + } + + if (retval > 1) { + pr_warn("Failed to set dgpu disable (retval): 0x%x\n", retval); + return -EIO; + } + + sysfs_notify(&asus->platform_device->dev.kobj, NULL, "dgpu_disable"); + + return 0; +} + +static ssize_t dgpu_disable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct asus_wmi *asus = dev_get_drvdata(dev); + u8 mode = asus->dgpu_disable; + + return sysfs_emit(buf, "%d\n", mode); +} + +/* + * A user may be required to store the value twice, typcial store first, then + * rescan PCI bus to activate power, then store a second time to save correctly. + * The reason for this is that an extra code path in the ACPI is enabled when + * the device and bus are powered. + */ +static ssize_t dgpu_disable_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + bool disable; + int result; + + struct asus_wmi *asus = dev_get_drvdata(dev); + + result = kstrtobool(buf, &disable); + if (result) + return result; + + asus->dgpu_disable = disable; + + result = dgpu_disable_write(asus); + if (result) + return result; + + return count; +} + +static DEVICE_ATTR_RW(dgpu_disable); + +/* eGPU ********************************************************************/ +static int egpu_enable_check_present(struct asus_wmi *asus) +{ + u32 result; + int err; + + asus->egpu_enable_available = false; + + err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_EGPU, &result); + if (err) { + if (err == -ENODEV) + return 0; + return err; + } + + if (result & ASUS_WMI_DSTS_PRESENCE_BIT) { + asus->egpu_enable_available = true; + asus->egpu_enable = result & ASUS_WMI_DSTS_STATUS_BIT; + } + + return 0; +} + +static int egpu_enable_write(struct asus_wmi *asus) +{ + u32 retval; + u8 value; + int err; + + /* Don't rely on type conversion */ + value = asus->egpu_enable ? 1 : 0; + + err = asus_wmi_set_devstate(ASUS_WMI_DEVID_EGPU, value, &retval); + + if (err) { + pr_warn("Failed to set egpu disable: %d\n", err); + return err; + } + + if (retval > 1) { + pr_warn("Failed to set egpu disable (retval): 0x%x\n", retval); + return -EIO; + } + + sysfs_notify(&asus->platform_device->dev.kobj, NULL, "egpu_enable"); + + return 0; +} + +static ssize_t egpu_enable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct asus_wmi *asus = dev_get_drvdata(dev); + bool mode = asus->egpu_enable; + + return sysfs_emit(buf, "%d\n", mode); +} + +/* The ACPI call to enable the eGPU also disables the internal dGPU */ +static ssize_t egpu_enable_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + bool enable; + int result; + + struct asus_wmi *asus = dev_get_drvdata(dev); + + result = kstrtobool(buf, &enable); + if (result) + return result; + + asus->egpu_enable = enable; + + result = egpu_enable_write(asus); + if (result) + return result; + + /* Ensure that the kernel status of dgpu is updated */ + result = dgpu_disable_check_present(asus); + if (result) + return result; + + return count; +} + +static DEVICE_ATTR_RW(egpu_enable); + /* Battery ********************************************************************/ /* The battery maximum charging percentage */ @@ -1221,6 +1409,87 @@ exit: return result; } +/* Panel Overdrive ************************************************************/ +static int panel_od_check_present(struct asus_wmi *asus) +{ + u32 result; + int err; + + asus->panel_overdrive_available = false; + + err = asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_PANEL_OD, &result); + if (err) { + if (err == -ENODEV) + return 0; + return err; + } + + if (result & ASUS_WMI_DSTS_PRESENCE_BIT) { + asus->panel_overdrive_available = true; + asus->panel_overdrive = result & ASUS_WMI_DSTS_STATUS_BIT; + } + + return 0; +} + +static int panel_od_write(struct asus_wmi *asus) +{ + u32 retval; + u8 value; + int err; + + /* Don't rely on type conversion */ + value = asus->panel_overdrive ? 1 : 0; + + err = asus_wmi_set_devstate(ASUS_WMI_DEVID_PANEL_OD, value, &retval); + + if (err) { + pr_warn("Failed to set panel overdrive: %d\n", err); + return err; + } + + if (retval > 1) { + pr_warn("Failed to set panel overdrive (retval): 0x%x\n", retval); + return -EIO; + } + + sysfs_notify(&asus->platform_device->dev.kobj, NULL, "panel_od"); + + return 0; +} + +static ssize_t panel_od_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct asus_wmi *asus = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%d\n", asus->panel_overdrive); +} + +static ssize_t panel_od_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + bool overdrive; + int result; + + struct asus_wmi *asus = dev_get_drvdata(dev); + + result = kstrtobool(buf, &overdrive); + if (result) + return result; + + asus->panel_overdrive = overdrive; + result = panel_od_write(asus); + + if (result) + return result; + + return count; +} + +static DEVICE_ATTR_RW(panel_od); + /* Quirks *********************************************************************/ static void asus_wmi_set_xusb2pr(struct asus_wmi *asus) @@ -1838,12 +2107,23 @@ static int throttle_thermal_policy_set_default(struct asus_wmi *asus) static int throttle_thermal_policy_switch_next(struct asus_wmi *asus) { u8 new_mode = asus->throttle_thermal_policy_mode + 1; + int err; if (new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT) new_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; asus->throttle_thermal_policy_mode = new_mode; - return throttle_thermal_policy_write(asus); + err = throttle_thermal_policy_write(asus); + if (err) + return err; + + /* + * Ensure that platform_profile updates userspace with the change to ensure + * that platform_profile and throttle_thermal_policy_mode are in sync. + */ + platform_profile_notify(); + + return 0; } static ssize_t throttle_thermal_policy_show(struct device *dev, @@ -1859,9 +2139,10 @@ static ssize_t throttle_thermal_policy_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - int result; - u8 new_mode; struct asus_wmi *asus = dev_get_drvdata(dev); + u8 new_mode; + int result; + int err; result = kstrtou8(buf, 10, &new_mode); if (result < 0) @@ -1871,7 +2152,15 @@ static ssize_t throttle_thermal_policy_store(struct device *dev, return -EINVAL; asus->throttle_thermal_policy_mode = new_mode; - throttle_thermal_policy_write(asus); + err = throttle_thermal_policy_write(asus); + if (err) + return err; + + /* + * Ensure that platform_profile updates userspace with the change to ensure + * that platform_profile and throttle_thermal_policy_mode are in sync. + */ + platform_profile_notify(); return count; } @@ -1879,6 +2168,91 @@ static ssize_t throttle_thermal_policy_store(struct device *dev, // Throttle thermal policy: 0 - default, 1 - overboost, 2 - silent static DEVICE_ATTR_RW(throttle_thermal_policy); +/* Platform profile ***********************************************************/ +static int platform_profile_get(struct platform_profile_handler *pprof, + enum platform_profile_option *profile) +{ + struct asus_wmi *asus; + int tp; + + asus = container_of(pprof, struct asus_wmi, platform_profile_handler); + + tp = asus->throttle_thermal_policy_mode; + + switch (tp) { + case ASUS_THROTTLE_THERMAL_POLICY_DEFAULT: + *profile = PLATFORM_PROFILE_BALANCED; + break; + case ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST: + *profile = PLATFORM_PROFILE_PERFORMANCE; + break; + case ASUS_THROTTLE_THERMAL_POLICY_SILENT: + *profile = PLATFORM_PROFILE_QUIET; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int platform_profile_set(struct platform_profile_handler *pprof, + enum platform_profile_option profile) +{ + struct asus_wmi *asus; + int tp; + + asus = container_of(pprof, struct asus_wmi, platform_profile_handler); + + switch (profile) { + case PLATFORM_PROFILE_PERFORMANCE: + tp = ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST; + break; + case PLATFORM_PROFILE_BALANCED: + tp = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT; + break; + case PLATFORM_PROFILE_QUIET: + tp = ASUS_THROTTLE_THERMAL_POLICY_SILENT; + break; + default: + return -EOPNOTSUPP; + } + + asus->throttle_thermal_policy_mode = tp; + return throttle_thermal_policy_write(asus); +} + +static int platform_profile_setup(struct asus_wmi *asus) +{ + struct device *dev = &asus->platform_device->dev; + int err; + + /* + * Not an error if a component platform_profile relies on is unavailable + * so early return, skipping the setup of platform_profile. + */ + if (!asus->throttle_thermal_policy_available) + return 0; + + dev_info(dev, "Using throttle_thermal_policy for platform_profile support\n"); + + asus->platform_profile_handler.profile_get = platform_profile_get; + asus->platform_profile_handler.profile_set = platform_profile_set; + + set_bit(PLATFORM_PROFILE_QUIET, asus->platform_profile_handler.choices); + set_bit(PLATFORM_PROFILE_BALANCED, + asus->platform_profile_handler.choices); + set_bit(PLATFORM_PROFILE_PERFORMANCE, + asus->platform_profile_handler.choices); + + err = platform_profile_register(&asus->platform_profile_handler); + if (err) + return err; + + asus->platform_profile_support = true; + return 0; +} + /* Backlight ******************************************************************/ static int read_backlight_power(struct asus_wmi *asus) @@ -2328,10 +2702,13 @@ static struct attribute *platform_attributes[] = { &dev_attr_camera.attr, &dev_attr_cardr.attr, &dev_attr_touchpad.attr, + &dev_attr_egpu_enable.attr, + &dev_attr_dgpu_disable.attr, &dev_attr_lid_resume.attr, &dev_attr_als_enable.attr, &dev_attr_fan_boost_mode.attr, &dev_attr_throttle_thermal_policy.attr, + &dev_attr_panel_od.attr, NULL }; @@ -2353,10 +2730,16 @@ static umode_t asus_sysfs_is_visible(struct kobject *kobj, devid = ASUS_WMI_DEVID_LID_RESUME; else if (attr == &dev_attr_als_enable.attr) devid = ASUS_WMI_DEVID_ALS_ENABLE; + else if (attr == &dev_attr_egpu_enable.attr) + ok = asus->egpu_enable_available; + else if (attr == &dev_attr_dgpu_disable.attr) + ok = asus->dgpu_disable_available; else if (attr == &dev_attr_fan_boost_mode.attr) ok = asus->fan_boost_mode_available; else if (attr == &dev_attr_throttle_thermal_policy.attr) ok = asus->throttle_thermal_policy_available; + else if (attr == &dev_attr_panel_od.attr) + ok = asus->panel_overdrive_available; if (devid != -1) ok = !(asus_wmi_get_devstate_simple(asus, devid) < 0); @@ -2612,6 +2995,14 @@ static int asus_wmi_add(struct platform_device *pdev) if (err) goto fail_platform; + err = egpu_enable_check_present(asus); + if (err) + goto fail_egpu_enable; + + err = dgpu_disable_check_present(asus); + if (err) + goto fail_dgpu_disable; + err = fan_boost_mode_check_present(asus); if (err) goto fail_fan_boost_mode; @@ -2622,6 +3013,14 @@ static int asus_wmi_add(struct platform_device *pdev) else throttle_thermal_policy_set_default(asus); + err = platform_profile_setup(asus); + if (err) + goto fail_platform_profile_setup; + + err = panel_od_check_present(asus); + if (err) + goto fail_panel_od; + err = asus_wmi_sysfs_init(asus->platform_device); if (err) goto fail_sysfs; @@ -2707,8 +3106,14 @@ fail_input: asus_wmi_sysfs_exit(asus->platform_device); fail_sysfs: fail_throttle_thermal_policy: +fail_platform_profile_setup: + if (asus->platform_profile_support) + platform_profile_remove(); fail_fan_boost_mode: +fail_egpu_enable: +fail_dgpu_disable: fail_platform: +fail_panel_od: kfree(asus); return err; } @@ -2728,6 +3133,9 @@ static int asus_wmi_remove(struct platform_device *device) asus_fan_set_auto(asus); asus_wmi_battery_exit(asus); + if (asus->platform_profile_support) + platform_profile_remove(); + kfree(asus); return 0; } diff --git a/drivers/platform/x86/dell/Kconfig b/drivers/platform/x86/dell/Kconfig index 9e7314d90bea..821aba31821c 100644 --- a/drivers/platform/x86/dell/Kconfig +++ b/drivers/platform/x86/dell/Kconfig @@ -140,7 +140,7 @@ config DELL_SMBIOS_SMM config DELL_SMO8800 tristate "Dell Latitude freefall driver (ACPI SMO88XX)" default m - depends on ACPI + depends on ACPI || COMPILE_TEST help Say Y here if you want to support SMO88XX freefall devices on Dell Latitude laptops. diff --git a/drivers/platform/x86/dell/dcdbas.c b/drivers/platform/x86/dell/dcdbas.c index 28447c180be8..5e63d6225048 100644 --- a/drivers/platform/x86/dell/dcdbas.c +++ b/drivers/platform/x86/dell/dcdbas.c @@ -278,9 +278,9 @@ int dcdbas_smi_request(struct smi_cmd *smi_cmd) } /* SMI requires CPU 0 */ - get_online_cpus(); + cpus_read_lock(); ret = smp_call_on_cpu(0, raise_smi, smi_cmd, true); - put_online_cpus(); + cpus_read_unlock(); return ret; } diff --git a/drivers/platform/x86/dell/dell-smbios-smm.c b/drivers/platform/x86/dell/dell-smbios-smm.c index 97c52a839a3e..320c032418ac 100644 --- a/drivers/platform/x86/dell/dell-smbios-smm.c +++ b/drivers/platform/x86/dell/dell-smbios-smm.c @@ -24,37 +24,6 @@ static struct calling_interface_buffer *buffer; static struct platform_device *platform_device; static DEFINE_MUTEX(smm_mutex); -static const struct dmi_system_id dell_device_table[] __initconst = { - { - .ident = "Dell laptop", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_CHASSIS_TYPE, "8"), - }, - }, - { - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_CHASSIS_TYPE, "9"), /*Laptop*/ - }, - }, - { - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_CHASSIS_TYPE, "10"), /*Notebook*/ - }, - }, - { - .ident = "Dell Computer Corporation", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), - DMI_MATCH(DMI_CHASSIS_TYPE, "8"), - }, - }, - { } -}; -MODULE_DEVICE_TABLE(dmi, dell_device_table); - static void parse_da_table(const struct dmi_header *dm) { struct calling_interface_structure *table = diff --git a/drivers/platform/x86/dell/dell-smbios-wmi.c b/drivers/platform/x86/dell/dell-smbios-wmi.c index 33f823772733..931cc50136de 100644 --- a/drivers/platform/x86/dell/dell-smbios-wmi.c +++ b/drivers/platform/x86/dell/dell-smbios-wmi.c @@ -69,9 +69,10 @@ static int run_smbios_call(struct wmi_device *wdev) if (obj->type == ACPI_TYPE_INTEGER) dev_dbg(&wdev->dev, "SMBIOS call failed: %llu\n", obj->integer.value); + kfree(output.pointer); return -EIO; } - memcpy(&priv->buf->std, obj->buffer.pointer, obj->buffer.length); + memcpy(input.pointer, obj->buffer.pointer, obj->buffer.length); dev_dbg(&wdev->dev, "result: [%08x,%08x,%08x,%08x]\n", priv->buf->std.output[0], priv->buf->std.output[1], priv->buf->std.output[2], priv->buf->std.output[3]); diff --git a/drivers/platform/x86/dell/dell-smo8800.c b/drivers/platform/x86/dell/dell-smo8800.c index 5d9304a7de1b..3385e852104c 100644 --- a/drivers/platform/x86/dell/dell-smo8800.c +++ b/drivers/platform/x86/dell/dell-smo8800.c @@ -10,13 +10,14 @@ #define DRIVER_NAME "smo8800" -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/acpi.h> +#include <linux/fs.h> #include <linux/interrupt.h> +#include <linux/kernel.h> #include <linux/miscdevice.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/platform_device.h> #include <linux/uaccess.h> -#include <linux/fs.h> struct smo8800_device { u32 irq; /* acpi device irq */ @@ -44,37 +45,6 @@ static irqreturn_t smo8800_interrupt_thread(int irq, void *data) return IRQ_HANDLED; } -static acpi_status smo8800_get_resource(struct acpi_resource *resource, - void *context) -{ - struct acpi_resource_extended_irq *irq; - - if (resource->type != ACPI_RESOURCE_TYPE_EXTENDED_IRQ) - return AE_OK; - - irq = &resource->data.extended_irq; - if (!irq || !irq->interrupt_count) - return AE_OK; - - *((u32 *)context) = irq->interrupts[0]; - return AE_CTRL_TERMINATE; -} - -static u32 smo8800_get_irq(struct acpi_device *device) -{ - u32 irq = 0; - acpi_status status; - - status = acpi_walk_resources(device->handle, METHOD_NAME__CRS, - smo8800_get_resource, &irq); - if (ACPI_FAILURE(status)) { - dev_err(&device->dev, "acpi_walk_resources failed\n"); - return 0; - } - - return irq; -} - static ssize_t smo8800_misc_read(struct file *file, char __user *buf, size_t count, loff_t *pos) { @@ -136,7 +106,7 @@ static const struct file_operations smo8800_misc_fops = { .release = smo8800_misc_release, }; -static int smo8800_add(struct acpi_device *device) +static int smo8800_probe(struct platform_device *device) { int err; struct smo8800_device *smo8800; @@ -160,14 +130,12 @@ static int smo8800_add(struct acpi_device *device) return err; } - device->driver_data = smo8800; + platform_set_drvdata(device, smo8800); - smo8800->irq = smo8800_get_irq(device); - if (!smo8800->irq) { - dev_err(&device->dev, "failed to obtain IRQ\n"); - err = -EINVAL; + err = platform_get_irq(device, 0); + if (err < 0) goto error; - } + smo8800->irq = err; err = request_threaded_irq(smo8800->irq, smo8800_interrupt_quick, smo8800_interrupt_thread, @@ -189,9 +157,9 @@ error: return err; } -static int smo8800_remove(struct acpi_device *device) +static int smo8800_remove(struct platform_device *device) { - struct smo8800_device *smo8800 = device->driver_data; + struct smo8800_device *smo8800 = platform_get_drvdata(device); free_irq(smo8800->irq, smo8800); misc_deregister(&smo8800->miscdev); @@ -211,21 +179,17 @@ static const struct acpi_device_id smo8800_ids[] = { { "SMO8831", 0 }, { "", 0 }, }; - MODULE_DEVICE_TABLE(acpi, smo8800_ids); -static struct acpi_driver smo8800_driver = { - .name = DRIVER_NAME, - .class = "Latitude", - .ids = smo8800_ids, - .ops = { - .add = smo8800_add, - .remove = smo8800_remove, +static struct platform_driver smo8800_driver = { + .probe = smo8800_probe, + .remove = smo8800_remove, + .driver = { + .name = DRIVER_NAME, + .acpi_match_table = smo8800_ids, }, - .owner = THIS_MODULE, }; - -module_acpi_driver(smo8800_driver); +module_platform_driver(smo8800_driver); MODULE_DESCRIPTION("Dell Latitude freefall driver (ACPI SMO88XX)"); MODULE_LICENSE("GPL"); diff --git a/drivers/platform/x86/dual_accel_detect.h b/drivers/platform/x86/dual_accel_detect.h index a9eae17cc43d..72e9624331c8 100644 --- a/drivers/platform/x86/dual_accel_detect.h +++ b/drivers/platform/x86/dual_accel_detect.h @@ -17,30 +17,6 @@ #include <linux/acpi.h> #include <linux/i2c.h> -static int dual_accel_i2c_resource_count(struct acpi_resource *ares, void *data) -{ - struct acpi_resource_i2c_serialbus *sb; - int *count = data; - - if (i2c_acpi_get_i2c_resource(ares, &sb)) - *count = *count + 1; - - return 1; -} - -static int dual_accel_i2c_client_count(struct acpi_device *adev) -{ - int ret, count = 0; - LIST_HEAD(r); - - ret = acpi_dev_get_resources(adev, &r, dual_accel_i2c_resource_count, &count); - if (ret < 0) - return ret; - - acpi_dev_free_resource_list(&r); - return count; -} - static bool dual_accel_detect_bosc0200(void) { struct acpi_device *adev; @@ -50,7 +26,7 @@ static bool dual_accel_detect_bosc0200(void) if (!adev) return false; - count = dual_accel_i2c_client_count(adev); + count = i2c_acpi_client_count(adev); acpi_dev_put(adev); diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c index 8c0867bda828..cc53f725c041 100644 --- a/drivers/platform/x86/hp_accel.c +++ b/drivers/platform/x86/hp_accel.c @@ -28,9 +28,6 @@ #include <linux/serio.h> #include "../../misc/lis3lv02d/lis3lv02d.h" -#define DRIVER_NAME "hp_accel" -#define ACPI_MDPS_CLASS "accelerometer" - /* Delayed LEDs infrastructure ------------------------------------ */ /* Special LED class that can defer work */ @@ -78,23 +75,14 @@ static const struct acpi_device_id lis3lv02d_device_ids[] = { }; MODULE_DEVICE_TABLE(acpi, lis3lv02d_device_ids); - /** - * lis3lv02d_acpi_init - ACPI _INI method: initialize the device. + * lis3lv02d_acpi_init - initialize the device for ACPI * @lis3: pointer to the device struct * * Returns 0 on success. */ static int lis3lv02d_acpi_init(struct lis3lv02d *lis3) { - struct acpi_device *dev = lis3->bus_priv; - if (!lis3->init_required) - return 0; - - if (acpi_evaluate_object(dev->handle, METHOD_NAME__INI, - NULL, NULL) != AE_OK) - return -EINVAL; - return 0; } @@ -278,30 +266,6 @@ static struct delayed_led_classdev hpled_led = { .set_brightness = hpled_set, }; -static acpi_status -lis3lv02d_get_resource(struct acpi_resource *resource, void *context) -{ - if (resource->type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ) { - struct acpi_resource_extended_irq *irq; - u32 *device_irq = context; - - irq = &resource->data.extended_irq; - *device_irq = irq->interrupts[0]; - } - - return AE_OK; -} - -static void lis3lv02d_enum_resources(struct acpi_device *device) -{ - acpi_status status; - - status = acpi_walk_resources(device->handle, METHOD_NAME__CRS, - lis3lv02d_get_resource, &lis3_dev.irq); - if (ACPI_FAILURE(status)) - printk(KERN_DEBUG DRIVER_NAME ": Error getting resources\n"); -} - static bool hp_accel_i8042_filter(unsigned char data, unsigned char str, struct serio *port) { @@ -331,23 +295,19 @@ static bool hp_accel_i8042_filter(unsigned char data, unsigned char str, return false; } -static int lis3lv02d_add(struct acpi_device *device) +static int lis3lv02d_probe(struct platform_device *device) { int ret; - if (!device) - return -EINVAL; - - lis3_dev.bus_priv = device; + lis3_dev.bus_priv = ACPI_COMPANION(&device->dev); lis3_dev.init = lis3lv02d_acpi_init; lis3_dev.read = lis3lv02d_acpi_read; lis3_dev.write = lis3lv02d_acpi_write; - strcpy(acpi_device_name(device), DRIVER_NAME); - strcpy(acpi_device_class(device), ACPI_MDPS_CLASS); - device->driver_data = &lis3_dev; /* obtain IRQ number of our device from ACPI */ - lis3lv02d_enum_resources(device); + ret = platform_get_irq_optional(device, 0); + if (ret > 0) + lis3_dev.irq = ret; /* If possible use a "standard" axes order */ if (lis3_dev.ac.x && lis3_dev.ac.y && lis3_dev.ac.z) { @@ -359,7 +319,6 @@ static int lis3lv02d_add(struct acpi_device *device) } /* call the core layer do its init */ - lis3_dev.init_required = true; ret = lis3lv02d_init_device(&lis3_dev); if (ret) return ret; @@ -381,11 +340,8 @@ static int lis3lv02d_add(struct acpi_device *device) return ret; } -static int lis3lv02d_remove(struct acpi_device *device) +static int lis3lv02d_remove(struct platform_device *device) { - if (!device) - return -EINVAL; - i8042_remove_filter(hp_accel_i8042_filter); lis3lv02d_joystick_disable(&lis3_dev); lis3lv02d_poweroff(&lis3_dev); @@ -396,7 +352,6 @@ static int lis3lv02d_remove(struct acpi_device *device) return lis3lv02d_remove_fs(&lis3_dev); } - #ifdef CONFIG_PM_SLEEP static int lis3lv02d_suspend(struct device *dev) { @@ -407,14 +362,12 @@ static int lis3lv02d_suspend(struct device *dev) static int lis3lv02d_resume(struct device *dev) { - lis3_dev.init_required = false; lis3lv02d_poweron(&lis3_dev); return 0; } static int lis3lv02d_restore(struct device *dev) { - lis3_dev.init_required = true; lis3lv02d_poweron(&lis3_dev); return 0; } @@ -434,17 +387,16 @@ static const struct dev_pm_ops hp_accel_pm = { #endif /* For the HP MDPS aka 3D Driveguard */ -static struct acpi_driver lis3lv02d_driver = { - .name = DRIVER_NAME, - .class = ACPI_MDPS_CLASS, - .ids = lis3lv02d_device_ids, - .ops = { - .add = lis3lv02d_add, - .remove = lis3lv02d_remove, +static struct platform_driver lis3lv02d_driver = { + .probe = lis3lv02d_probe, + .remove = lis3lv02d_remove, + .driver = { + .name = "hp_accel", + .pm = HP_ACCEL_PM, + .acpi_match_table = lis3lv02d_device_ids, }, - .drv.pm = HP_ACCEL_PM, }; -module_acpi_driver(lis3lv02d_driver); +module_platform_driver(lis3lv02d_driver); MODULE_DESCRIPTION("Glue between LIS3LV02Dx and HP ACPI BIOS and support for disk protection LED."); MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek"); diff --git a/drivers/platform/x86/i2c-multi-instantiate.c b/drivers/platform/x86/i2c-multi-instantiate.c index 2cce82579d09..a50153ecd560 100644 --- a/drivers/platform/x86/i2c-multi-instantiate.c +++ b/drivers/platform/x86/i2c-multi-instantiate.c @@ -32,31 +32,6 @@ struct i2c_multi_inst_data { struct i2c_client *clients[]; }; -static int i2c_multi_inst_count(struct acpi_resource *ares, void *data) -{ - struct acpi_resource_i2c_serialbus *sb; - int *count = data; - - if (i2c_acpi_get_i2c_resource(ares, &sb)) - *count = *count + 1; - - return 1; -} - -static int i2c_multi_inst_count_resources(struct acpi_device *adev) -{ - LIST_HEAD(r); - int count = 0; - int ret; - - ret = acpi_dev_get_resources(adev, &r, i2c_multi_inst_count, &count); - if (ret < 0) - return ret; - - acpi_dev_free_resource_list(&r); - return count; -} - static int i2c_multi_inst_probe(struct platform_device *pdev) { struct i2c_multi_inst_data *multi; @@ -76,7 +51,7 @@ static int i2c_multi_inst_probe(struct platform_device *pdev) adev = ACPI_COMPANION(dev); /* Count number of clients to instantiate */ - ret = i2c_multi_inst_count_resources(adev); + ret = i2c_acpi_client_count(adev); if (ret < 0) return ret; diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 784326bd72f0..e7a1299e3776 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -41,6 +41,7 @@ static const char *const ideapad_wmi_fnesc_events[] = { "26CAB2E5-5CF1-46AE-AAC3-4A12B6BA50E6", /* Yoga 3 */ "56322276-8493-4CE8-A783-98C991274F5E", /* Yoga 700 */ + "8FC0DE0C-B4E4-43FD-B0F3-8871711C1294", /* Legion 5 */ }; #endif @@ -1459,11 +1460,19 @@ static void ideapad_acpi_notify(acpi_handle handle, u32 event, void *data) static void ideapad_wmi_notify(u32 value, void *context) { struct ideapad_private *priv = context; + unsigned long result; switch (value) { case 128: ideapad_input_report(priv, value); break; + case 208: + if (!eval_hals(priv->adev->handle, &result)) { + bool state = test_bit(HALS_FNLOCK_STATE_BIT, &result); + + exec_sals(priv->adev->handle, state ? SALS_FNLOCK_ON : SALS_FNLOCK_OFF); + } + break; default: dev_info(&priv->platform_device->dev, "Unknown WMI event: %u\n", value); diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig index f2eef337eb98..0b21468e1bd0 100644 --- a/drivers/platform/x86/intel/Kconfig +++ b/drivers/platform/x86/intel/Kconfig @@ -16,7 +16,156 @@ menuconfig X86_PLATFORM_DRIVERS_INTEL if X86_PLATFORM_DRIVERS_INTEL +source "drivers/platform/x86/intel/atomisp2/Kconfig" +source "drivers/platform/x86/intel/int1092/Kconfig" source "drivers/platform/x86/intel/int33fe/Kconfig" source "drivers/platform/x86/intel/int3472/Kconfig" +source "drivers/platform/x86/intel/pmc/Kconfig" +source "drivers/platform/x86/intel/pmt/Kconfig" +source "drivers/platform/x86/intel/speed_select_if/Kconfig" +source "drivers/platform/x86/intel/telemetry/Kconfig" +source "drivers/platform/x86/intel/wmi/Kconfig" + +config INTEL_HID_EVENT + tristate "Intel HID Event" + depends on ACPI + depends on INPUT + depends on I2C + select INPUT_SPARSEKMAP + help + This driver provides support for the Intel HID Event hotkey interface. + Some laptops require this driver for hotkey support. + + To compile this driver as a module, choose M here: the module will + be called intel_hid. + +config INTEL_VBTN + tristate "Intel Virtual Button" + depends on ACPI + depends on INPUT + depends on I2C + select INPUT_SPARSEKMAP + help + This driver provides support for the Intel Virtual Button interface. + Some laptops require this driver for power button support. + + To compile this driver as a module, choose M here: the module will + be called intel_vbtn. + +config INTEL_INT0002_VGPIO + tristate "Intel ACPI INT0002 Virtual GPIO driver" + depends on GPIOLIB && ACPI && PM_SLEEP + select GPIOLIB_IRQCHIP + help + Some peripherals on Bay Trail and Cherry Trail platforms signal a + Power Management Event (PME) to the Power Management Controller (PMC) + to wakeup the system. When this happens software needs to explicitly + clear the PME bus 0 status bit in the GPE0a_STS register to avoid an + IRQ storm on IRQ 9. + + This is modelled in ACPI through the INT0002 ACPI device, which is + called a "Virtual GPIO controller" in ACPI because it defines the + event handler to call when the PME triggers through _AEI and _L02 + methods as would be done for a real GPIO interrupt in ACPI. + + To compile this driver as a module, choose M here: the module will + be called intel_int0002_vgpio. + +config INTEL_OAKTRAIL + tristate "Intel Oaktrail Platform Extras" + depends on ACPI + depends on ACPI_VIDEO || ACPI_VIDEO=n + depends on RFKILL && BACKLIGHT_CLASS_DEVICE && ACPI + help + Intel Oaktrail platform need this driver to provide interfaces to + enable/disable the Camera, WiFi, BT etc. devices. If in doubt, say Y + here; it will only load on supported platforms. + +config INTEL_BXTWC_PMIC_TMU + tristate "Intel Broxton Whiskey Cove TMU Driver" + depends on INTEL_SOC_PMIC_BXTWC + depends on MFD_INTEL_PMC_BXT + select REGMAP + help + Select this driver to use Intel Broxton Whiskey Cove PMIC TMU feature. + This driver enables the alarm wakeup functionality in the TMU unit of + Whiskey Cove PMIC. + +config INTEL_CHTDC_TI_PWRBTN + tristate "Intel Cherry Trail Dollar Cove TI power button driver" + depends on INTEL_SOC_PMIC_CHTDC_TI + depends on INPUT + help + This option adds a power button driver for Dollar Cove TI + PMIC on Intel Cherry Trail devices. + + To compile this driver as a module, choose M here: the module + will be called intel_chtdc_ti_pwrbtn. + +config INTEL_MRFLD_PWRBTN + tristate "Intel Merrifield Basin Cove power button driver" + depends on INTEL_SOC_PMIC_MRFLD + depends on INPUT + help + This option adds a power button driver for Basin Cove PMIC + on Intel Merrifield devices. + + To compile this driver as a module, choose M here: the module + will be called intel_mrfld_pwrbtn. + +config INTEL_PUNIT_IPC + tristate "Intel P-Unit IPC Driver" + help + This driver provides support for Intel P-Unit Mailbox IPC mechanism, + which is used to bridge the communications between kernel and P-Unit. + +config INTEL_RST + tristate "Intel Rapid Start Technology Driver" + depends on ACPI + help + This driver provides support for modifying parameters on systems + equipped with Intel's Rapid Start Technology. When put in an ACPI + sleep state, these devices will wake after either a configured + timeout or when the system battery reaches a critical state, + automatically copying memory contents to disk. On resume, the + firmware will copy the memory contents back to RAM and resume the OS + as usual. + +config INTEL_SMARTCONNECT + tristate "Intel Smart Connect disabling driver" + depends on ACPI + help + Intel Smart Connect is a technology intended to permit devices to + update state by resuming for a short period of time at regular + intervals. If a user enables this functionality under Windows and + then reboots into Linux, the system may remain configured to resume + on suspend. In the absence of any userspace to support it, the system + will then remain awake until something triggers another suspend. + + This driver checks to determine whether the device has Intel Smart + Connect enabled, and if so disables it. + +config INTEL_TURBO_MAX_3 + bool "Intel Turbo Boost Max Technology 3.0 enumeration driver" + depends on X86_64 && SCHED_MC_PRIO + help + This driver reads maximum performance ratio of each CPU and set up + the scheduler priority metrics. In this way scheduler can prefer + CPU with higher performance to schedule tasks. + + This driver is only required when the system is not using Hardware + P-States (HWP). In HWP mode, priority can be read from ACPI tables. + +config INTEL_UNCORE_FREQ_CONTROL + tristate "Intel Uncore frequency control driver" + depends on X86_64 + help + This driver allows control of Uncore frequency limits on + supported server platforms. + + Uncore frequency controls RING/LLC (last-level cache) clocks. + + To compile this driver as a module, choose M here: the module + will be called intel-uncore-frequency. endif # X86_PLATFORM_DRIVERS_INTEL diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile index 0653055942d5..8b3a3f7bab49 100644 --- a/drivers/platform/x86/intel/Makefile +++ b/drivers/platform/x86/intel/Makefile @@ -4,5 +4,44 @@ # Intel x86 Platform-Specific Drivers # +obj-$(CONFIG_INTEL_ATOMISP2_PDX86) += atomisp2/ +obj-$(CONFIG_INTEL_SAR_INT1092) += int1092/ obj-$(CONFIG_INTEL_CHT_INT33FE) += int33fe/ obj-$(CONFIG_INTEL_SKL_INT3472) += int3472/ +obj-$(CONFIG_INTEL_PMC_CORE) += pmc/ +obj-$(CONFIG_INTEL_PMT_CLASS) += pmt/ +obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE) += speed_select_if/ +obj-$(CONFIG_INTEL_TELEMETRY) += telemetry/ +obj-$(CONFIG_INTEL_WMI) += wmi/ + +# Intel input drivers +intel-hid-y := hid.o +obj-$(CONFIG_INTEL_HID_EVENT) += intel-hid.o +intel-vbtn-y := vbtn.o +obj-$(CONFIG_INTEL_VBTN) += intel-vbtn.o + +# Intel miscellaneous drivers +intel_int0002_vgpio-y := int0002_vgpio.o +obj-$(CONFIG_INTEL_INT0002_VGPIO) += intel_int0002_vgpio.o +intel_oaktrail-y := oaktrail.o +obj-$(CONFIG_INTEL_OAKTRAIL) += intel_oaktrail.o + +# Intel PMIC / PMC / P-Unit drivers +intel_bxtwc_tmu-y := bxtwc_tmu.o +obj-$(CONFIG_INTEL_BXTWC_PMIC_TMU) += intel_bxtwc_tmu.o +intel_chtdc_ti_pwrbtn-y := chtdc_ti_pwrbtn.o +obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN) += intel_chtdc_ti_pwrbtn.o +intel_mrfld_pwrbtn-y := mrfld_pwrbtn.o +obj-$(CONFIG_INTEL_MRFLD_PWRBTN) += intel_mrfld_pwrbtn.o +intel_punit_ipc-y := punit_ipc.o +obj-$(CONFIG_INTEL_PUNIT_IPC) += intel_punit_ipc.o + +# Intel Uncore drivers +intel-rst-y := rst.o +obj-$(CONFIG_INTEL_RST) += intel-rst.o +intel-smartconnect-y := smartconnect.o +obj-$(CONFIG_INTEL_SMARTCONNECT) += intel-smartconnect.o +intel_turbo_max_3-y := turbo_max_3.o +obj-$(CONFIG_INTEL_TURBO_MAX_3) += intel_turbo_max_3.o +intel-uncore-frequency-y := uncore-frequency.o +obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL) += intel-uncore-frequency.o diff --git a/drivers/platform/x86/intel/atomisp2/Kconfig b/drivers/platform/x86/intel/atomisp2/Kconfig new file mode 100644 index 000000000000..35dd2be9d2a1 --- /dev/null +++ b/drivers/platform/x86/intel/atomisp2/Kconfig @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Intel x86 Platform Specific Drivers +# + +config INTEL_ATOMISP2_PDX86 + bool + +config INTEL_ATOMISP2_LED + tristate "Intel AtomISP v2 camera LED driver" + depends on GPIOLIB && LEDS_GPIO + select INTEL_ATOMISP2_PDX86 + help + Many Bay Trail and Cherry Trail devices come with a camera attached + to Intel's Image Signal Processor. Linux currently does not have a + driver for these, so they do not work as a camera. Some of these + camera's have a LED which is controlled through a GPIO. + + Some of these devices have a firmware issue where the LED gets turned + on at boot. This driver will turn the LED off at boot and also allows + controlling the LED (repurposing it) through the sysfs LED interface. + + Which GPIO is attached to the LED is usually not described in the + ACPI tables, so this driver contains per-system info about the GPIO + inside the driver, this means that this driver only works on systems + the driver knows about. + + To compile this driver as a module, choose M here: the module + will be called intel_atomisp2_led. + +config INTEL_ATOMISP2_PM + tristate "Intel AtomISP v2 dummy / power-management driver" + depends on PCI && IOSF_MBI && PM + depends on !INTEL_ATOMISP + select INTEL_ATOMISP2_PDX86 + help + Power-management driver for Intel's Image Signal Processor found on + Bay Trail and Cherry Trail devices. This dummy driver's sole purpose + is to turn the ISP off (put it in D3) to save power and to allow + entering of S0ix modes. + + To compile this driver as a module, choose M here: the module + will be called intel_atomisp2_pm. diff --git a/drivers/platform/x86/intel/atomisp2/Makefile b/drivers/platform/x86/intel/atomisp2/Makefile new file mode 100644 index 000000000000..96b1e877d1f1 --- /dev/null +++ b/drivers/platform/x86/intel/atomisp2/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Intel x86 Platform Specific Drivers +# + +intel_atomisp2_led-y := led.o +obj-$(CONFIG_INTEL_ATOMISP2_LED) += intel_atomisp2_led.o +intel_atomisp2_pm-y += pm.o +obj-$(CONFIG_INTEL_ATOMISP2_PM) += intel_atomisp2_pm.o diff --git a/drivers/platform/x86/intel_atomisp2_led.c b/drivers/platform/x86/intel/atomisp2/led.c index 5935dfca166f..5935dfca166f 100644 --- a/drivers/platform/x86/intel_atomisp2_led.c +++ b/drivers/platform/x86/intel/atomisp2/led.c diff --git a/drivers/platform/x86/intel_atomisp2_pm.c b/drivers/platform/x86/intel/atomisp2/pm.c index 805fc0d8515c..805fc0d8515c 100644 --- a/drivers/platform/x86/intel_atomisp2_pm.c +++ b/drivers/platform/x86/intel/atomisp2/pm.c diff --git a/drivers/platform/x86/intel_bxtwc_tmu.c b/drivers/platform/x86/intel/bxtwc_tmu.c index 7ccf583649e6..7ccf583649e6 100644 --- a/drivers/platform/x86/intel_bxtwc_tmu.c +++ b/drivers/platform/x86/intel/bxtwc_tmu.c diff --git a/drivers/platform/x86/intel_chtdc_ti_pwrbtn.c b/drivers/platform/x86/intel/chtdc_ti_pwrbtn.c index 9606a994af22..9606a994af22 100644 --- a/drivers/platform/x86/intel_chtdc_ti_pwrbtn.c +++ b/drivers/platform/x86/intel/chtdc_ti_pwrbtn.c diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel/hid.c index 2e4e97a626a5..a33a5826e81a 100644 --- a/drivers/platform/x86/intel-hid.c +++ b/drivers/platform/x86/intel/hid.c @@ -14,7 +14,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/suspend.h> -#include "dual_accel_detect.h" +#include "../dual_accel_detect.h" /* When NOT in tablet mode, VGBS returns with the flag 0x40 */ #define TABLET_MODE_FLAG BIT(6) diff --git a/drivers/platform/x86/intel_int0002_vgpio.c b/drivers/platform/x86/intel/int0002_vgpio.c index 569342aa8926..569342aa8926 100644 --- a/drivers/platform/x86/intel_int0002_vgpio.c +++ b/drivers/platform/x86/intel/int0002_vgpio.c diff --git a/drivers/platform/x86/intel/int1092/Kconfig b/drivers/platform/x86/intel/int1092/Kconfig new file mode 100644 index 000000000000..2e9a177241aa --- /dev/null +++ b/drivers/platform/x86/intel/int1092/Kconfig @@ -0,0 +1,14 @@ +config INTEL_SAR_INT1092 + tristate "Intel Specific Absorption Rate Driver" + depends on ACPI + help + This driver helps to limit the exposure of human body to RF frequency by + providing information to userspace application that will inform the Intel + M.2 modem to regulate the RF power based on SAR data obtained from the + sensors captured in the BIOS. ACPI interface exposes this data from the BIOS + to SAR driver. The front end application in userspace will interact with SAR + driver to obtain information like the device mode, Antenna index, baseband index, + SAR table index and use available communication like MBIM interface to enable + data communication to modem for RF power regulation. Enable this config when + given platform needs to support "Dynamic SAR" configuration for a modem available + on the platform. diff --git a/drivers/platform/x86/intel/int1092/Makefile b/drivers/platform/x86/intel/int1092/Makefile new file mode 100644 index 000000000000..4ab94e541de3 --- /dev/null +++ b/drivers/platform/x86/intel/int1092/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_INTEL_SAR_INT1092) += intel_sar.o diff --git a/drivers/platform/x86/intel/int1092/intel_sar.c b/drivers/platform/x86/intel/int1092/intel_sar.c new file mode 100644 index 000000000000..379560fe5df9 --- /dev/null +++ b/drivers/platform/x86/intel/int1092/intel_sar.c @@ -0,0 +1,316 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2021, Intel Corporation. + */ + +#include <linux/acpi.h> +#include <linux/kobject.h> +#include <linux/platform_device.h> +#include <linux/sysfs.h> +#include "intel_sar.h" + +/** + * get_int_value: Retrieve integer values from ACPI Object + * @obj: acpi_object pointer which has the integer value + * @out: output pointer will get integer value + * + * Function is used to retrieve integer value from acpi object. + * + * Return: + * * 0 on success + * * -EIO if there is an issue in acpi_object passed. + */ +static int get_int_value(union acpi_object *obj, int *out) +{ + if (!obj || obj->type != ACPI_TYPE_INTEGER) + return -EIO; + *out = (int)obj->integer.value; + return 0; +} + +/** + * update_sar_data: sar data is updated based on regulatory mode + * @context: pointer to driver context structure + * + * sar_data is updated based on regulatory value + * context->reg_value will never exceed MAX_REGULATORY + */ +static void update_sar_data(struct wwan_sar_context *context) +{ + struct wwan_device_mode_configuration *config = + &context->config_data[context->reg_value]; + + if (config->device_mode_info && + context->sar_data.device_mode < config->total_dev_mode) { + struct wwan_device_mode_info *dev_mode = + &config->device_mode_info[context->sar_data.device_mode]; + + context->sar_data.antennatable_index = dev_mode->antennatable_index; + context->sar_data.bandtable_index = dev_mode->bandtable_index; + context->sar_data.sartable_index = dev_mode->sartable_index; + } +} + +/** + * parse_package: parse acpi package for retrieving SAR information + * @context: pointer to driver context structure + * @item : acpi_object pointer + * + * Given acpi_object is iterated to retrieve information for each device mode. + * If a given package corresponding to a specific device mode is faulty, it is + * skipped and the specific entry in context structure will have the default value + * of zero. Decoding of subsequent device modes is realized by having "continue" + * statements in the for loop on encountering error in parsing given device mode. + * + * Return: + * AE_OK if success + * AE_ERROR on error + */ +static acpi_status parse_package(struct wwan_sar_context *context, union acpi_object *item) +{ + struct wwan_device_mode_configuration *data; + int value, itr, reg; + union acpi_object *num; + + num = &item->package.elements[0]; + if (get_int_value(num, &value) || value < 0 || value >= MAX_REGULATORY) + return AE_ERROR; + + reg = value; + + data = &context->config_data[reg]; + if (data->total_dev_mode > MAX_DEV_MODES || data->total_dev_mode == 0 || + item->package.count <= data->total_dev_mode) + return AE_ERROR; + + data->device_mode_info = kmalloc_array(data->total_dev_mode, + sizeof(struct wwan_device_mode_info), GFP_KERNEL); + if (!data->device_mode_info) + return AE_ERROR; + + for (itr = 0; itr < data->total_dev_mode; itr++) { + struct wwan_device_mode_info temp = { 0 }; + + num = &item->package.elements[itr + 1]; + if (num->type != ACPI_TYPE_PACKAGE || num->package.count < TOTAL_DATA) + continue; + if (get_int_value(&num->package.elements[0], &temp.device_mode)) + continue; + if (get_int_value(&num->package.elements[1], &temp.bandtable_index)) + continue; + if (get_int_value(&num->package.elements[2], &temp.antennatable_index)) + continue; + if (get_int_value(&num->package.elements[3], &temp.sartable_index)) + continue; + data->device_mode_info[itr] = temp; + } + return AE_OK; +} + +/** + * sar_get_device_mode: Extraction of information from BIOS via DSM calls + * @device: ACPI device for which to retrieve the data + * + * Retrieve the current device mode information from the BIOS. + * + * Return: + * AE_OK on success + * AE_ERROR on error + */ +static acpi_status sar_get_device_mode(struct platform_device *device) +{ + struct wwan_sar_context *context = dev_get_drvdata(&device->dev); + acpi_status status = AE_OK; + union acpi_object *out; + u32 rev = 0; + int value; + + out = acpi_evaluate_dsm(context->handle, &context->guid, rev, + COMMAND_ID_DEV_MODE, NULL); + if (get_int_value(out, &value)) { + dev_err(&device->dev, "DSM cmd:%d Failed to retrieve value\n", COMMAND_ID_DEV_MODE); + status = AE_ERROR; + goto dev_mode_error; + } + context->sar_data.device_mode = value; + update_sar_data(context); + sysfs_notify(&device->dev.kobj, NULL, SYSFS_DATANAME); + +dev_mode_error: + ACPI_FREE(out); + return status; +} + +static const struct acpi_device_id sar_device_ids[] = { + { "INTC1092", 0}, + {} +}; +MODULE_DEVICE_TABLE(acpi, sar_device_ids); + +static ssize_t intc_data_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct wwan_sar_context *context = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%d %d %d %d\n", context->sar_data.device_mode, + context->sar_data.bandtable_index, + context->sar_data.antennatable_index, + context->sar_data.sartable_index); +} +static DEVICE_ATTR_RO(intc_data); + +static ssize_t intc_reg_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct wwan_sar_context *context = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%d\n", context->reg_value); +} + +static ssize_t intc_reg_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct wwan_sar_context *context = dev_get_drvdata(dev); + unsigned int value; + int read; + + if (!count) + return -EINVAL; + read = kstrtouint(buf, 10, &value); + if (read < 0) + return read; + if (value >= MAX_REGULATORY) + return -EOVERFLOW; + context->reg_value = value; + update_sar_data(context); + sysfs_notify(&dev->kobj, NULL, SYSFS_DATANAME); + return count; +} +static DEVICE_ATTR_RW(intc_reg); + +static struct attribute *intcsar_attrs[] = { + &dev_attr_intc_data.attr, + &dev_attr_intc_reg.attr, + NULL +}; + +static struct attribute_group intcsar_group = { + .attrs = intcsar_attrs, +}; + +static void sar_notify(acpi_handle handle, u32 event, void *data) +{ + struct platform_device *device = data; + + if (event == SAR_EVENT) { + if (sar_get_device_mode(device) != AE_OK) + dev_err(&device->dev, "sar_get_device_mode error"); + } +} + +static void sar_get_data(int reg, struct wwan_sar_context *context) +{ + union acpi_object *out, req; + u32 rev = 0; + + req.type = ACPI_TYPE_INTEGER; + req.integer.value = reg; + out = acpi_evaluate_dsm(context->handle, &context->guid, rev, + COMMAND_ID_CONFIG_TABLE, &req); + if (!out) + return; + if (out->type == ACPI_TYPE_PACKAGE && out->package.count >= 3 && + out->package.elements[0].type == ACPI_TYPE_INTEGER && + out->package.elements[1].type == ACPI_TYPE_INTEGER && + out->package.elements[2].type == ACPI_TYPE_PACKAGE && + out->package.elements[2].package.count > 0) { + context->config_data[reg].version = out->package.elements[0].integer.value; + context->config_data[reg].total_dev_mode = + out->package.elements[1].integer.value; + if (context->config_data[reg].total_dev_mode <= 0 || + context->config_data[reg].total_dev_mode > MAX_DEV_MODES) { + ACPI_FREE(out); + return; + } + parse_package(context, &out->package.elements[2]); + } + ACPI_FREE(out); +} + +static int sar_probe(struct platform_device *device) +{ + struct wwan_sar_context *context; + int reg; + int result; + + context = kzalloc(sizeof(*context), GFP_KERNEL); + if (!context) + return -ENOMEM; + + context->sar_device = device; + context->handle = ACPI_HANDLE(&device->dev); + dev_set_drvdata(&device->dev, context); + + result = guid_parse(SAR_DSM_UUID, &context->guid); + if (result) { + dev_err(&device->dev, "SAR UUID parse error: %d\n", result); + goto r_free; + } + + for (reg = 0; reg < MAX_REGULATORY; reg++) + sar_get_data(reg, context); + + if (sar_get_device_mode(device) != AE_OK) { + dev_err(&device->dev, "Failed to get device mode\n"); + result = -EIO; + goto r_free; + } + + result = sysfs_create_group(&device->dev.kobj, &intcsar_group); + if (result) { + dev_err(&device->dev, "sysfs creation failed\n"); + goto r_free; + } + + if (acpi_install_notify_handler(ACPI_HANDLE(&device->dev), ACPI_DEVICE_NOTIFY, + sar_notify, (void *)device) != AE_OK) { + dev_err(&device->dev, "Failed acpi_install_notify_handler\n"); + result = -EIO; + goto r_sys; + } + return 0; + +r_sys: + sysfs_remove_group(&device->dev.kobj, &intcsar_group); +r_free: + kfree(context); + return result; +} + +static int sar_remove(struct platform_device *device) +{ + struct wwan_sar_context *context = dev_get_drvdata(&device->dev); + int reg; + + acpi_remove_notify_handler(ACPI_HANDLE(&device->dev), + ACPI_DEVICE_NOTIFY, sar_notify); + sysfs_remove_group(&device->dev.kobj, &intcsar_group); + for (reg = 0; reg < MAX_REGULATORY; reg++) + kfree(context->config_data[reg].device_mode_info); + + kfree(context); + return 0; +} + +static struct platform_driver sar_driver = { + .probe = sar_probe, + .remove = sar_remove, + .driver = { + .name = DRVNAME, + .owner = THIS_MODULE, + .acpi_match_table = ACPI_PTR(sar_device_ids) + } +}; +module_platform_driver(sar_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Platform device driver for INTEL MODEM BIOS SAR"); +MODULE_AUTHOR("Shravan S <s.shravan@intel.com>"); diff --git a/drivers/platform/x86/intel/int1092/intel_sar.h b/drivers/platform/x86/intel/int1092/intel_sar.h new file mode 100644 index 000000000000..b5310510b84c --- /dev/null +++ b/drivers/platform/x86/intel/int1092/intel_sar.h @@ -0,0 +1,86 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2021, Intel Corporation. + */ +#ifndef INTEL_SAR_H +#define INTEL_SAR_H + +#define COMMAND_ID_DEV_MODE 1 +#define COMMAND_ID_CONFIG_TABLE 2 +#define DRVNAME "intc_sar" +#define MAX_DEV_MODES 50 +#define MAX_REGULATORY 3 +#define SAR_DSM_UUID "82737E72-3A33-4C45-A9C7-57C0411A5F13" +#define SAR_EVENT 0x80 +#define SYSFS_DATANAME "intc_data" +#define TOTAL_DATA 4 + +/** + * Structure wwan_device_mode_info - device mode information + * Holds the data that needs to be passed to userspace. + * The data is updated from the BIOS sensor information. + * @device_mode: Specific mode of the device + * @bandtable_index: Index of RF band + * @antennatable_index: Index of antenna + * @sartable_index: Index of SAR + */ +struct wwan_device_mode_info { + int device_mode; + int bandtable_index; + int antennatable_index; + int sartable_index; +}; + +/** + * Structure wwan_device_mode_configuration - device configuration + * Holds the data that is configured and obtained on probe event. + * The data is updated from the BIOS sensor information. + * @version: Mode configuration version + * @total_dev_mode: Total number of device modes + * @device_mode_info: pointer to structure wwan_device_mode_info + */ +struct wwan_device_mode_configuration { + int version; + int total_dev_mode; + struct wwan_device_mode_info *device_mode_info; +}; + +/** + * Structure wwan_supported_info - userspace datastore + * Holds the data that is obtained from userspace + * The data is updated from the userspace and send value back in the + * structure format that is mentioned here. + * @reg_mode_needed: regulatory mode set by user for tests + * @bios_table_revision: Version of SAR table + * @num_supported_modes: Total supported modes based on reg_mode + */ +struct wwan_supported_info { + int reg_mode_needed; + int bios_table_revision; + int num_supported_modes; +}; + +/** + * Structure wwan_sar_context - context of SAR + * Holds the complete context as long as the driver is in existence + * The context holds instance of the data used for different cases. + * @guid: Group id + * @handle: store acpi handle + * @reg_value: regulatory value + * Regulatory 0: FCC, 1: CE, 2: ISED + * @sar_device: platform_device type + * @sar_kobject: kobject for sysfs + * @supported_data: wwan_supported_info struct + * @sar_data: wwan_device_mode_info struct + * @config_data: wwan_device_mode_configuration array struct + */ +struct wwan_sar_context { + guid_t guid; + acpi_handle handle; + int reg_value; + struct platform_device *sar_device; + struct wwan_supported_info supported_data; + struct wwan_device_mode_info sar_data; + struct wwan_device_mode_configuration config_data[MAX_REGULATORY]; +}; +#endif /* INTEL_SAR_H */ diff --git a/drivers/platform/x86/intel/int33fe/Makefile b/drivers/platform/x86/intel/int33fe/Makefile index cc11183ce179..9456e3b37f6f 100644 --- a/drivers/platform/x86/intel/int33fe/Makefile +++ b/drivers/platform/x86/intel/int33fe/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_INTEL_CHT_INT33FE) += intel_cht_int33fe.o -intel_cht_int33fe-objs := intel_cht_int33fe_common.o \ +intel_cht_int33fe-y := intel_cht_int33fe_common.o \ intel_cht_int33fe_typec.o \ intel_cht_int33fe_microb.o diff --git a/drivers/platform/x86/intel/int33fe/intel_cht_int33fe_common.c b/drivers/platform/x86/intel/int33fe/intel_cht_int33fe_common.c index 251ed9bac789..463222521e61 100644 --- a/drivers/platform/x86/intel/int33fe/intel_cht_int33fe_common.c +++ b/drivers/platform/x86/intel/int33fe/intel_cht_int33fe_common.c @@ -16,33 +16,6 @@ #define EXPECTED_PTYPE 4 -static int cht_int33fe_i2c_res_filter(struct acpi_resource *ares, void *data) -{ - struct acpi_resource_i2c_serialbus *sb; - int *count = data; - - if (i2c_acpi_get_i2c_resource(ares, &sb)) - (*count)++; - - return 1; -} - -static int cht_int33fe_count_i2c_clients(struct device *dev) -{ - struct acpi_device *adev = ACPI_COMPANION(dev); - LIST_HEAD(resource_list); - int count = 0; - int ret; - - ret = acpi_dev_get_resources(adev, &resource_list, - cht_int33fe_i2c_res_filter, &count); - acpi_dev_free_resource_list(&resource_list); - if (ret < 0) - return ret; - - return count; -} - static int cht_int33fe_check_hw_type(struct device *dev) { unsigned long long ptyp; @@ -69,7 +42,7 @@ static int cht_int33fe_check_hw_type(struct device *dev) return -ENODEV; } - ret = cht_int33fe_count_i2c_clients(dev); + ret = i2c_acpi_client_count(ACPI_COMPANION(dev)); if (ret < 0) return ret; diff --git a/drivers/platform/x86/intel/int3472/Makefile b/drivers/platform/x86/intel/int3472/Makefile index 48bd97f0a04e..2362e04db18d 100644 --- a/drivers/platform/x86/intel/int3472/Makefile +++ b/drivers/platform/x86/intel/int3472/Makefile @@ -1,5 +1,5 @@ obj-$(CONFIG_INTEL_SKL_INT3472) += intel_skl_int3472.o -intel_skl_int3472-objs := intel_skl_int3472_common.o \ +intel_skl_int3472-y := intel_skl_int3472_common.o \ intel_skl_int3472_discrete.o \ intel_skl_int3472_tps68470.o \ intel_skl_int3472_clk_and_regulator.o diff --git a/drivers/platform/x86/intel_mrfld_pwrbtn.c b/drivers/platform/x86/intel/mrfld_pwrbtn.c index d58fea51747e..d58fea51747e 100644 --- a/drivers/platform/x86/intel_mrfld_pwrbtn.c +++ b/drivers/platform/x86/intel/mrfld_pwrbtn.c diff --git a/drivers/platform/x86/intel_oaktrail.c b/drivers/platform/x86/intel/oaktrail.c index 1a09a75bd16d..1a09a75bd16d 100644 --- a/drivers/platform/x86/intel_oaktrail.c +++ b/drivers/platform/x86/intel/oaktrail.c diff --git a/drivers/platform/x86/intel/pmc/Kconfig b/drivers/platform/x86/intel/pmc/Kconfig new file mode 100644 index 000000000000..b526597e4deb --- /dev/null +++ b/drivers/platform/x86/intel/pmc/Kconfig @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Intel x86 Platform-Specific Drivers +# + +config INTEL_PMC_CORE + tristate "Intel PMC Core driver" + depends on PCI + depends on ACPI + help + The Intel Platform Controller Hub for Intel Core SoCs provides access + to Power Management Controller registers via various interfaces. This + driver can utilize debugging capabilities and supported features as + exposed by the Power Management Controller. It also may perform some + tasks in the PMC in order to enable transition into the SLPS0 state. + It should be selected on all Intel platforms supported by the driver. + + Supported features: + - SLP_S0_RESIDENCY counter + - PCH IP Power Gating status + - LTR Ignore / LTR Show + - MPHY/PLL gating status (Sunrisepoint PCH only) + - SLPS0 Debug registers (Cannonlake/Icelake PCH) + - Low Power Mode registers (Tigerlake and beyond) + - PMC quirks as needed to enable SLPS0/S0ix diff --git a/drivers/platform/x86/intel/pmc/Makefile b/drivers/platform/x86/intel/pmc/Makefile new file mode 100644 index 000000000000..8966fcdc0e1d --- /dev/null +++ b/drivers/platform/x86/intel/pmc/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Intel x86 Platform-Specific Drivers +# + +intel_pmc_core-y := core.o +obj-$(CONFIG_INTEL_PMC_CORE) += intel_pmc_core.o +intel_pmc_core_pltdrv-y := pltdrv.o +obj-$(CONFIG_INTEL_PMC_CORE) += intel_pmc_core_pltdrv.o diff --git a/drivers/platform/x86/intel_pmc_core.c b/drivers/platform/x86/intel/pmc/core.c index b0e486a6bdfb..ac19fcc9abbf 100644 --- a/drivers/platform/x86/intel_pmc_core.c +++ b/drivers/platform/x86/intel/pmc/core.c @@ -31,7 +31,7 @@ #include <asm/msr.h> #include <asm/tsc.h> -#include "intel_pmc_core.h" +#include "core.h" #define ACPI_S0IX_DSM_UUID "57a6512e-3979-4e9d-9708-ff13b2508972" #define ACPI_GET_LOW_MODE_REGISTERS 1 @@ -645,6 +645,306 @@ free_acpi_obj: ACPI_FREE(out_obj); } +/* Alder Lake: PGD PFET Enable Ack Status Register(s) bitmap */ +static const struct pmc_bit_map adl_pfear_map[] = { + {"SPI/eSPI", BIT(2)}, + {"XHCI", BIT(3)}, + {"SPA", BIT(4)}, + {"SPB", BIT(5)}, + {"SPC", BIT(6)}, + {"GBE", BIT(7)}, + + {"SATA", BIT(0)}, + {"HDA_PGD0", BIT(1)}, + {"HDA_PGD1", BIT(2)}, + {"HDA_PGD2", BIT(3)}, + {"HDA_PGD3", BIT(4)}, + {"SPD", BIT(5)}, + {"LPSS", BIT(6)}, + + {"SMB", BIT(0)}, + {"ISH", BIT(1)}, + {"ITH", BIT(3)}, + + {"XDCI", BIT(1)}, + {"DCI", BIT(2)}, + {"CSE", BIT(3)}, + {"CSME_KVM", BIT(4)}, + {"CSME_PMT", BIT(5)}, + {"CSME_CLINK", BIT(6)}, + {"CSME_PTIO", BIT(7)}, + + {"CSME_USBR", BIT(0)}, + {"CSME_SUSRAM", BIT(1)}, + {"CSME_SMT1", BIT(2)}, + {"CSME_SMS2", BIT(4)}, + {"CSME_SMS1", BIT(5)}, + {"CSME_RTC", BIT(6)}, + {"CSME_PSF", BIT(7)}, + + {"CNVI", BIT(3)}, + + {"HDA_PGD4", BIT(2)}, + {"HDA_PGD5", BIT(3)}, + {"HDA_PGD6", BIT(4)}, + {} +}; + +static const struct pmc_bit_map *ext_adl_pfear_map[] = { + /* + * Check intel_pmc_core_ids[] users of cnp_reg_map for + * a list of core SoCs using this. + */ + adl_pfear_map, + NULL +}; + +static const struct pmc_bit_map adl_ltr_show_map[] = { + {"SOUTHPORT_A", CNP_PMC_LTR_SPA}, + {"SOUTHPORT_B", CNP_PMC_LTR_SPB}, + {"SATA", CNP_PMC_LTR_SATA}, + {"GIGABIT_ETHERNET", CNP_PMC_LTR_GBE}, + {"XHCI", CNP_PMC_LTR_XHCI}, + {"SOUTHPORT_F", ADL_PMC_LTR_SPF}, + {"ME", CNP_PMC_LTR_ME}, + /* EVA is Enterprise Value Add, doesn't really exist on PCH */ + {"SATA1", CNP_PMC_LTR_EVA}, + {"SOUTHPORT_C", CNP_PMC_LTR_SPC}, + {"HD_AUDIO", CNP_PMC_LTR_AZ}, + {"CNV", CNP_PMC_LTR_CNV}, + {"LPSS", CNP_PMC_LTR_LPSS}, + {"SOUTHPORT_D", CNP_PMC_LTR_SPD}, + {"SOUTHPORT_E", CNP_PMC_LTR_SPE}, + {"SATA2", CNP_PMC_LTR_CAM}, + {"ESPI", CNP_PMC_LTR_ESPI}, + {"SCC", CNP_PMC_LTR_SCC}, + {"ISH", CNP_PMC_LTR_ISH}, + {"UFSX2", CNP_PMC_LTR_UFSX2}, + {"EMMC", CNP_PMC_LTR_EMMC}, + /* + * Check intel_pmc_core_ids[] users of cnp_reg_map for + * a list of core SoCs using this. + */ + {"WIGIG", ICL_PMC_LTR_WIGIG}, + {"THC0", TGL_PMC_LTR_THC0}, + {"THC1", TGL_PMC_LTR_THC1}, + {"SOUTHPORT_G", CNP_PMC_LTR_RESERVED}, + + /* Below two cannot be used for LTR_IGNORE */ + {"CURRENT_PLATFORM", CNP_PMC_LTR_CUR_PLT}, + {"AGGREGATED_SYSTEM", CNP_PMC_LTR_CUR_ASLT}, + {} +}; + +static const struct pmc_bit_map adl_clocksource_status_map[] = { + {"CLKPART1_OFF_STS", BIT(0)}, + {"CLKPART2_OFF_STS", BIT(1)}, + {"CLKPART3_OFF_STS", BIT(2)}, + {"CLKPART4_OFF_STS", BIT(3)}, + {"CLKPART5_OFF_STS", BIT(4)}, + {"CLKPART6_OFF_STS", BIT(5)}, + {"CLKPART7_OFF_STS", BIT(6)}, + {"CLKPART8_OFF_STS", BIT(7)}, + {"PCIE0PLL_OFF_STS", BIT(10)}, + {"PCIE1PLL_OFF_STS", BIT(11)}, + {"PCIE2PLL_OFF_STS", BIT(12)}, + {"PCIE3PLL_OFF_STS", BIT(13)}, + {"PCIE4PLL_OFF_STS", BIT(14)}, + {"PCIE5PLL_OFF_STS", BIT(15)}, + {"PCIE6PLL_OFF_STS", BIT(16)}, + {"USB2PLL_OFF_STS", BIT(18)}, + {"OCPLL_OFF_STS", BIT(22)}, + {"AUDIOPLL_OFF_STS", BIT(23)}, + {"GBEPLL_OFF_STS", BIT(24)}, + {"Fast_XTAL_Osc_OFF_STS", BIT(25)}, + {"AC_Ring_Osc_OFF_STS", BIT(26)}, + {"MC_Ring_Osc_OFF_STS", BIT(27)}, + {"SATAPLL_OFF_STS", BIT(29)}, + {"USB3PLL_OFF_STS", BIT(31)}, + {} +}; + +static const struct pmc_bit_map adl_power_gating_status_0_map[] = { + {"PMC_PGD0_PG_STS", BIT(0)}, + {"DMI_PGD0_PG_STS", BIT(1)}, + {"ESPISPI_PGD0_PG_STS", BIT(2)}, + {"XHCI_PGD0_PG_STS", BIT(3)}, + {"SPA_PGD0_PG_STS", BIT(4)}, + {"SPB_PGD0_PG_STS", BIT(5)}, + {"SPC_PGD0_PG_STS", BIT(6)}, + {"GBE_PGD0_PG_STS", BIT(7)}, + {"SATA_PGD0_PG_STS", BIT(8)}, + {"DSP_PGD0_PG_STS", BIT(9)}, + {"DSP_PGD1_PG_STS", BIT(10)}, + {"DSP_PGD2_PG_STS", BIT(11)}, + {"DSP_PGD3_PG_STS", BIT(12)}, + {"SPD_PGD0_PG_STS", BIT(13)}, + {"LPSS_PGD0_PG_STS", BIT(14)}, + {"SMB_PGD0_PG_STS", BIT(16)}, + {"ISH_PGD0_PG_STS", BIT(17)}, + {"NPK_PGD0_PG_STS", BIT(19)}, + {"PECI_PGD0_PG_STS", BIT(21)}, + {"XDCI_PGD0_PG_STS", BIT(25)}, + {"EXI_PGD0_PG_STS", BIT(26)}, + {"CSE_PGD0_PG_STS", BIT(27)}, + {"KVMCC_PGD0_PG_STS", BIT(28)}, + {"PMT_PGD0_PG_STS", BIT(29)}, + {"CLINK_PGD0_PG_STS", BIT(30)}, + {"PTIO_PGD0_PG_STS", BIT(31)}, + {} +}; + +static const struct pmc_bit_map adl_power_gating_status_1_map[] = { + {"USBR0_PGD0_PG_STS", BIT(0)}, + {"SMT1_PGD0_PG_STS", BIT(2)}, + {"CSMERTC_PGD0_PG_STS", BIT(6)}, + {"CSMEPSF_PGD0_PG_STS", BIT(7)}, + {"CNVI_PGD0_PG_STS", BIT(19)}, + {"DSP_PGD4_PG_STS", BIT(26)}, + {"SPG_PGD0_PG_STS", BIT(27)}, + {"SPE_PGD0_PG_STS", BIT(28)}, + {} +}; + +static const struct pmc_bit_map adl_power_gating_status_2_map[] = { + {"THC0_PGD0_PG_STS", BIT(7)}, + {"THC1_PGD0_PG_STS", BIT(8)}, + {"SPF_PGD0_PG_STS", BIT(14)}, + {} +}; + +static const struct pmc_bit_map adl_d3_status_0_map[] = { + {"ISH_D3_STS", BIT(2)}, + {"LPSS_D3_STS", BIT(3)}, + {"XDCI_D3_STS", BIT(4)}, + {"XHCI_D3_STS", BIT(5)}, + {"SPA_D3_STS", BIT(12)}, + {"SPB_D3_STS", BIT(13)}, + {"SPC_D3_STS", BIT(14)}, + {"SPD_D3_STS", BIT(15)}, + {"SPE_D3_STS", BIT(16)}, + {"DSP_D3_STS", BIT(19)}, + {"SATA_D3_STS", BIT(20)}, + {"DMI_D3_STS", BIT(22)}, + {} +}; + +static const struct pmc_bit_map adl_d3_status_1_map[] = { + {"GBE_D3_STS", BIT(19)}, + {"CNVI_D3_STS", BIT(27)}, + {} +}; + +static const struct pmc_bit_map adl_d3_status_2_map[] = { + {"CSMERTC_D3_STS", BIT(1)}, + {"CSE_D3_STS", BIT(4)}, + {"KVMCC_D3_STS", BIT(5)}, + {"USBR0_D3_STS", BIT(6)}, + {"SMT1_D3_STS", BIT(8)}, + {"PTIO_D3_STS", BIT(16)}, + {"PMT_D3_STS", BIT(17)}, + {} +}; + +static const struct pmc_bit_map adl_d3_status_3_map[] = { + {"THC0_D3_STS", BIT(14)}, + {"THC1_D3_STS", BIT(15)}, + {} +}; + +static const struct pmc_bit_map adl_vnn_req_status_0_map[] = { + {"ISH_VNN_REQ_STS", BIT(2)}, + {"ESPISPI_VNN_REQ_STS", BIT(18)}, + {"DSP_VNN_REQ_STS", BIT(19)}, + {} +}; + +static const struct pmc_bit_map adl_vnn_req_status_1_map[] = { + {"NPK_VNN_REQ_STS", BIT(4)}, + {"EXI_VNN_REQ_STS", BIT(9)}, + {"GBE_VNN_REQ_STS", BIT(19)}, + {"SMB_VNN_REQ_STS", BIT(25)}, + {"CNVI_VNN_REQ_STS", BIT(27)}, + {} +}; + +static const struct pmc_bit_map adl_vnn_req_status_2_map[] = { + {"CSMERTC_VNN_REQ_STS", BIT(1)}, + {"CSE_VNN_REQ_STS", BIT(4)}, + {"SMT1_VNN_REQ_STS", BIT(8)}, + {"CLINK_VNN_REQ_STS", BIT(14)}, + {"GPIOCOM4_VNN_REQ_STS", BIT(20)}, + {"GPIOCOM3_VNN_REQ_STS", BIT(21)}, + {"GPIOCOM2_VNN_REQ_STS", BIT(22)}, + {"GPIOCOM1_VNN_REQ_STS", BIT(23)}, + {"GPIOCOM0_VNN_REQ_STS", BIT(24)}, + {} +}; + +static const struct pmc_bit_map adl_vnn_req_status_3_map[] = { + {"GPIOCOM5_VNN_REQ_STS", BIT(11)}, + {} +}; + +static const struct pmc_bit_map adl_vnn_misc_status_map[] = { + {"CPU_C10_REQ_STS", BIT(0)}, + {"PCIe_LPM_En_REQ_STS", BIT(3)}, + {"ITH_REQ_STS", BIT(5)}, + {"CNVI_REQ_STS", BIT(6)}, + {"ISH_REQ_STS", BIT(7)}, + {"USB2_SUS_PG_Sys_REQ_STS", BIT(10)}, + {"PCIe_Clk_REQ_STS", BIT(12)}, + {"MPHY_Core_DL_REQ_STS", BIT(16)}, + {"Break-even_En_REQ_STS", BIT(17)}, + {"MPHY_SUS_REQ_STS", BIT(22)}, + {"xDCI_attached_REQ_STS", BIT(24)}, + {} +}; + +static const struct pmc_bit_map *adl_lpm_maps[] = { + adl_clocksource_status_map, + adl_power_gating_status_0_map, + adl_power_gating_status_1_map, + adl_power_gating_status_2_map, + adl_d3_status_0_map, + adl_d3_status_1_map, + adl_d3_status_2_map, + adl_d3_status_3_map, + adl_vnn_req_status_0_map, + adl_vnn_req_status_1_map, + adl_vnn_req_status_2_map, + adl_vnn_req_status_3_map, + adl_vnn_misc_status_map, + tgl_signal_status_map, + NULL +}; + +static const struct pmc_reg_map adl_reg_map = { + .pfear_sts = ext_adl_pfear_map, + .slp_s0_offset = ADL_PMC_SLP_S0_RES_COUNTER_OFFSET, + .slp_s0_res_counter_step = TGL_PMC_SLP_S0_RES_COUNTER_STEP, + .ltr_show_sts = adl_ltr_show_map, + .msr_sts = msr_map, + .ltr_ignore_offset = CNP_PMC_LTR_IGNORE_OFFSET, + .regmap_length = CNP_PMC_MMIO_REG_LEN, + .ppfear0_offset = CNP_PMC_HOST_PPFEAR0A, + .ppfear_buckets = CNP_PPFEAR_NUM_ENTRIES, + .pm_cfg_offset = CNP_PMC_PM_CFG_OFFSET, + .pm_read_disable_bit = CNP_PMC_READ_DISABLE_BIT, + .ltr_ignore_max = ADL_NUM_IP_IGN_ALLOWED, + .lpm_num_modes = ADL_LPM_NUM_MODES, + .lpm_num_maps = ADL_LPM_NUM_MAPS, + .lpm_res_counter_step_x2 = TGL_PMC_LPM_RES_COUNTER_STEP_X2, + .etr3_offset = ETR3_OFFSET, + .lpm_sts_latch_en_offset = ADL_LPM_STATUS_LATCH_EN_OFFSET, + .lpm_priority_offset = ADL_LPM_PRI_OFFSET, + .lpm_en_offset = ADL_LPM_EN_OFFSET, + .lpm_residency_offset = ADL_LPM_RESIDENCY_OFFSET, + .lpm_sts = adl_lpm_maps, + .lpm_status_offset = ADL_LPM_STATUS_OFFSET, + .lpm_live_status_offset = ADL_LPM_LIVE_STATUS_OFFSET, +}; + static inline u32 pmc_core_reg_read(struct pmc_dev *pmcdev, int reg_offset) { return readl(pmcdev->regbase + reg_offset); @@ -1449,9 +1749,42 @@ static int pmc_core_pkgc_show(struct seq_file *s, void *unused) } DEFINE_SHOW_ATTRIBUTE(pmc_core_pkgc); -static void pmc_core_get_low_power_modes(struct pmc_dev *pmcdev) +static bool pmc_core_pri_verify(u32 lpm_pri, u8 *mode_order) { - u8 lpm_priority[LPM_MAX_NUM_MODES]; + int i, j; + + if (!lpm_pri) + return false; + /* + * Each byte contains the priority level for 2 modes (7:4 and 3:0). + * In a 32 bit register this allows for describing 8 modes. Store the + * levels and look for values out of range. + */ + for (i = 0; i < 8; i++) { + int level = lpm_pri & GENMASK(3, 0); + + if (level >= LPM_MAX_NUM_MODES) + return false; + + mode_order[i] = level; + lpm_pri >>= 4; + } + + /* Check that we have unique values */ + for (i = 0; i < LPM_MAX_NUM_MODES - 1; i++) + for (j = i + 1; j < LPM_MAX_NUM_MODES; j++) + if (mode_order[i] == mode_order[j]) + return false; + + return true; +} + +static void pmc_core_get_low_power_modes(struct platform_device *pdev) +{ + struct pmc_dev *pmcdev = platform_get_drvdata(pdev); + u8 pri_order[LPM_MAX_NUM_MODES] = LPM_DEFAULT_PRI; + u8 mode_order[LPM_MAX_NUM_MODES]; + u32 lpm_pri; u32 lpm_en; int mode, i, p; @@ -1462,24 +1795,28 @@ static void pmc_core_get_low_power_modes(struct pmc_dev *pmcdev) lpm_en = pmc_core_reg_read(pmcdev, pmcdev->map->lpm_en_offset); pmcdev->num_lpm_modes = hweight32(lpm_en); - /* Each byte contains information for 2 modes (7:4 and 3:0) */ - for (mode = 0; mode < LPM_MAX_NUM_MODES; mode += 2) { - u8 priority = pmc_core_reg_read_byte(pmcdev, - pmcdev->map->lpm_priority_offset + (mode / 2)); - int pri0 = GENMASK(3, 0) & priority; - int pri1 = (GENMASK(7, 4) & priority) >> 4; + /* Read 32 bit LPM_PRI register */ + lpm_pri = pmc_core_reg_read(pmcdev, pmcdev->map->lpm_priority_offset); - lpm_priority[pri0] = mode; - lpm_priority[pri1] = mode + 1; - } /* - * Loop though all modes from lowest to highest priority, + * If lpm_pri value passes verification, then override the default + * modes here. Otherwise stick with the default. + */ + if (pmc_core_pri_verify(lpm_pri, mode_order)) + /* Get list of modes in priority order */ + for (mode = 0; mode < LPM_MAX_NUM_MODES; mode++) + pri_order[mode_order[mode]] = mode; + else + dev_warn(&pdev->dev, "Assuming a default substate order for this platform\n"); + + /* + * Loop through all modes from lowest to highest priority, * and capture all enabled modes in order */ i = 0; for (p = LPM_MAX_NUM_MODES - 1; p >= 0; p--) { - int mode = lpm_priority[p]; + int mode = pri_order[p]; if (!(BIT(mode) & lpm_en)) continue; @@ -1574,6 +1911,7 @@ static const struct x86_cpu_id intel_pmc_core_ids[] = { X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L, &icl_reg_map), X86_MATCH_INTEL_FAM6_MODEL(ROCKETLAKE, &tgl_reg_map), X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L, &tgl_reg_map), + X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE, &adl_reg_map), {} }; @@ -1675,17 +2013,17 @@ static int pmc_core_probe(struct platform_device *pdev) mutex_init(&pmcdev->lock); pmcdev->pmc_xram_read_bit = pmc_core_check_read_lock_bit(pmcdev); - pmc_core_get_low_power_modes(pmcdev); + pmc_core_get_low_power_modes(pdev); pmc_core_do_dmi_quirks(pmcdev); if (pmcdev->map == &tgl_reg_map) pmc_core_get_tgl_lpm_reqs(pdev); /* - * On TGL, due to a hardware limitation, the GBE LTR blocks PC10 when - * a cable is attached. Tell the PMC to ignore it. + * On TGL and ADL, due to a hardware limitation, the GBE LTR blocks PC10 + * when a cable is attached. Tell the PMC to ignore it. */ - if (pmcdev->map == &tgl_reg_map) { + if (pmcdev->map == &tgl_reg_map || pmcdev->map == &adl_reg_map) { dev_dbg(&pdev->dev, "ignoring GBE LTR\n"); pmc_core_send_ltr_ignore(pmcdev, 3); } diff --git a/drivers/platform/x86/intel_pmc_core.h b/drivers/platform/x86/intel/pmc/core.h index e8dae9c6c45f..a46d3b53bf61 100644 --- a/drivers/platform/x86/intel_pmc_core.h +++ b/drivers/platform/x86/intel/pmc/core.h @@ -188,6 +188,8 @@ enum ppfear_regs { #define ICL_PMC_SLP_S0_RES_COUNTER_STEP 0x64 #define LPM_MAX_NUM_MODES 8 +#define LPM_DEFAULT_PRI { 7, 6, 2, 5, 4, 1, 3, 0 } + #define GET_X2_COUNTER(v) ((v) >> 1) #define LPM_STS_LATCH_MODE BIT(31) @@ -197,6 +199,10 @@ enum ppfear_regs { #define TGL_NUM_IP_IGN_ALLOWED 23 #define TGL_PMC_LPM_RES_COUNTER_STEP_X2 61 /* 30.5us * 2 */ +#define ADL_PMC_LTR_SPF 0x1C00 +#define ADL_NUM_IP_IGN_ALLOWED 23 +#define ADL_PMC_SLP_S0_RES_COUNTER_OFFSET 0x1098 + /* * Tigerlake Power Management Controller register offsets */ @@ -218,6 +224,18 @@ enum ppfear_regs { /* Extended Test Mode Register LPM bits (TGL and later */ #define ETR3_CLEAR_LPM_EVENTS BIT(28) +/* Alder Lake Power Management Controller register offsets */ +#define ADL_LPM_EN_OFFSET 0x179C +#define ADL_LPM_RESIDENCY_OFFSET 0x17A4 +#define ADL_LPM_NUM_MODES 2 +#define ADL_LPM_NUM_MAPS 14 + +/* Alder Lake Low Power Mode debug registers */ +#define ADL_LPM_STATUS_OFFSET 0x170C +#define ADL_LPM_PRI_OFFSET 0x17A0 +#define ADL_LPM_STATUS_LATCH_EN_OFFSET 0x1704 +#define ADL_LPM_LIVE_STATUS_OFFSET 0x1764 + const char *pmc_lpm_modes[] = { "S0i2.0", "S0i2.1", @@ -277,6 +295,7 @@ struct pmc_reg_map { const u32 pm_vric1_offset; /* Low Power Mode registers */ const int lpm_num_maps; + const int lpm_num_modes; const int lpm_res_counter_step_x2; const u32 lpm_sts_latch_en_offset; const u32 lpm_en_offset; diff --git a/drivers/platform/x86/intel_pmc_core_pltdrv.c b/drivers/platform/x86/intel/pmc/pltdrv.c index 73797680b895..73797680b895 100644 --- a/drivers/platform/x86/intel_pmc_core_pltdrv.c +++ b/drivers/platform/x86/intel/pmc/pltdrv.c diff --git a/drivers/platform/x86/intel/pmt/Kconfig b/drivers/platform/x86/intel/pmt/Kconfig new file mode 100644 index 000000000000..d630f883a717 --- /dev/null +++ b/drivers/platform/x86/intel/pmt/Kconfig @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Intel Platform Monitoring Technology drivers +# + +config INTEL_PMT_CLASS + tristate + help + The Intel Platform Monitoring Technology (PMT) class driver provides + the basic sysfs interface and file hierarchy used by PMT devices. + + For more information, see: + <file:Documentation/ABI/testing/sysfs-class-intel_pmt> + + To compile this driver as a module, choose M here: the module + will be called intel_pmt_class. + +config INTEL_PMT_TELEMETRY + tristate "Intel Platform Monitoring Technology (PMT) Telemetry driver" + depends on MFD_INTEL_PMT + select INTEL_PMT_CLASS + help + The Intel Platform Monitory Technology (PMT) Telemetry driver provides + access to hardware telemetry metrics on devices that support the + feature. + + To compile this driver as a module, choose M here: the module + will be called intel_pmt_telemetry. + +config INTEL_PMT_CRASHLOG + tristate "Intel Platform Monitoring Technology (PMT) Crashlog driver" + depends on MFD_INTEL_PMT + select INTEL_PMT_CLASS + help + The Intel Platform Monitoring Technology (PMT) crashlog driver provides + access to hardware crashlog capabilities on devices that support the + feature. + + To compile this driver as a module, choose M here: the module + will be called intel_pmt_crashlog. diff --git a/drivers/platform/x86/intel/pmt/Makefile b/drivers/platform/x86/intel/pmt/Makefile new file mode 100644 index 000000000000..279e158c7c23 --- /dev/null +++ b/drivers/platform/x86/intel/pmt/Makefile @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for linux/drivers/platform/x86/intel/pmt +# Intel Platform Monitoring Technology Drivers +# + +obj-$(CONFIG_INTEL_PMT_CLASS) += pmt_class.o +pmt_class-y := class.o +obj-$(CONFIG_INTEL_PMT_TELEMETRY) += pmt_telemetry.o +pmt_telemetry-y := telemetry.o +obj-$(CONFIG_INTEL_PMT_CRASHLOG) += pmt_crashlog.o +pmt_crashlog-y := crashlog.o diff --git a/drivers/platform/x86/intel_pmt_class.c b/drivers/platform/x86/intel/pmt/class.c index c86ff15b1ed5..659b1073033c 100644 --- a/drivers/platform/x86/intel_pmt_class.c +++ b/drivers/platform/x86/intel/pmt/class.c @@ -13,7 +13,7 @@ #include <linux/mm.h> #include <linux/pci.h> -#include "intel_pmt_class.h" +#include "class.h" #define PMT_XA_START 0 #define PMT_XA_MAX INT_MAX diff --git a/drivers/platform/x86/intel_pmt_class.h b/drivers/platform/x86/intel/pmt/class.h index 1337019c2873..1337019c2873 100644 --- a/drivers/platform/x86/intel_pmt_class.h +++ b/drivers/platform/x86/intel/pmt/class.h diff --git a/drivers/platform/x86/intel_pmt_crashlog.c b/drivers/platform/x86/intel/pmt/crashlog.c index 56963ceb6345..1c1021f04d3c 100644 --- a/drivers/platform/x86/intel_pmt_crashlog.c +++ b/drivers/platform/x86/intel/pmt/crashlog.c @@ -15,7 +15,7 @@ #include <linux/uaccess.h> #include <linux/overflow.h> -#include "intel_pmt_class.h" +#include "class.h" #define DRV_NAME "pmt_crashlog" diff --git a/drivers/platform/x86/intel_pmt_telemetry.c b/drivers/platform/x86/intel/pmt/telemetry.c index 9b95ef050457..38d52651c572 100644 --- a/drivers/platform/x86/intel_pmt_telemetry.c +++ b/drivers/platform/x86/intel/pmt/telemetry.c @@ -15,7 +15,7 @@ #include <linux/uaccess.h> #include <linux/overflow.h> -#include "intel_pmt_class.h" +#include "class.h" #define TELEM_DEV_NAME "pmt_telemetry" @@ -61,6 +61,14 @@ static int pmt_telem_header_decode(struct intel_pmt_entry *entry, /* Size is measured in DWORDS, but accessor returns bytes */ header->size = TELEM_SIZE(readl(disc_table)); + /* + * Some devices may expose non-functioning entries that are + * reserved for future use. They have zero size. Do not fail + * probe for these. Just ignore them. + */ + if (header->size == 0) + return 1; + return 0; } diff --git a/drivers/platform/x86/intel_punit_ipc.c b/drivers/platform/x86/intel/punit_ipc.c index f58b8543f6ac..f58b8543f6ac 100644 --- a/drivers/platform/x86/intel_punit_ipc.c +++ b/drivers/platform/x86/intel/punit_ipc.c diff --git a/drivers/platform/x86/intel-rst.c b/drivers/platform/x86/intel/rst.c index 3b81cb896fed..3b81cb896fed 100644 --- a/drivers/platform/x86/intel-rst.c +++ b/drivers/platform/x86/intel/rst.c diff --git a/drivers/platform/x86/intel-smartconnect.c b/drivers/platform/x86/intel/smartconnect.c index 64c2dc93472f..64c2dc93472f 100644 --- a/drivers/platform/x86/intel-smartconnect.c +++ b/drivers/platform/x86/intel/smartconnect.c diff --git a/drivers/platform/x86/intel_speed_select_if/Kconfig b/drivers/platform/x86/intel/speed_select_if/Kconfig index ce3e3dc076d2..ce3e3dc076d2 100644 --- a/drivers/platform/x86/intel_speed_select_if/Kconfig +++ b/drivers/platform/x86/intel/speed_select_if/Kconfig diff --git a/drivers/platform/x86/intel_speed_select_if/Makefile b/drivers/platform/x86/intel/speed_select_if/Makefile index 856076206f35..856076206f35 100644 --- a/drivers/platform/x86/intel_speed_select_if/Makefile +++ b/drivers/platform/x86/intel/speed_select_if/Makefile diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_common.c b/drivers/platform/x86/intel/speed_select_if/isst_if_common.c index 6f0cc679c8e5..c9a85eb2e860 100644 --- a/drivers/platform/x86/intel_speed_select_if/isst_if_common.c +++ b/drivers/platform/x86/intel/speed_select_if/isst_if_common.c @@ -265,9 +265,9 @@ static int isst_if_get_platform_info(void __user *argp) { struct isst_if_platform_info info; - info.api_version = ISST_IF_API_VERSION, - info.driver_version = ISST_IF_DRIVER_VERSION, - info.max_cmds_per_ioctl = ISST_IF_CMD_LIMIT, + info.api_version = ISST_IF_API_VERSION; + info.driver_version = ISST_IF_DRIVER_VERSION; + info.max_cmds_per_ioctl = ISST_IF_CMD_LIMIT; info.mbox_supported = punit_callbacks[ISST_IF_DEV_MBOX].registered; info.mmio_supported = punit_callbacks[ISST_IF_DEV_MMIO].registered; @@ -379,6 +379,8 @@ static int isst_if_cpu_online(unsigned int cpu) u64 data; int ret; + isst_cpu_info[cpu].numa_node = cpu_to_node(cpu); + ret = rdmsrl_safe(MSR_CPU_BUS_NUMBER, &data); if (ret) { /* This is not a fatal error on MSR mailbox only I/F */ @@ -397,7 +399,6 @@ static int isst_if_cpu_online(unsigned int cpu) return ret; } isst_cpu_info[cpu].punit_cpu_id = data; - isst_cpu_info[cpu].numa_node = cpu_to_node(cpu); isst_restore_msr_local(cpu); diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_common.h b/drivers/platform/x86/intel/speed_select_if/isst_if_common.h index fdecdae248d7..fdecdae248d7 100644 --- a/drivers/platform/x86/intel_speed_select_if/isst_if_common.h +++ b/drivers/platform/x86/intel/speed_select_if/isst_if_common.h diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_mbox_msr.c b/drivers/platform/x86/intel/speed_select_if/isst_if_mbox_msr.c index 1b6eab071068..1b6eab071068 100644 --- a/drivers/platform/x86/intel_speed_select_if/isst_if_mbox_msr.c +++ b/drivers/platform/x86/intel/speed_select_if/isst_if_mbox_msr.c diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_mbox_pci.c b/drivers/platform/x86/intel/speed_select_if/isst_if_mbox_pci.c index df1fc6c719f3..df1fc6c719f3 100644 --- a/drivers/platform/x86/intel_speed_select_if/isst_if_mbox_pci.c +++ b/drivers/platform/x86/intel/speed_select_if/isst_if_mbox_pci.c diff --git a/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c b/drivers/platform/x86/intel/speed_select_if/isst_if_mmio.c index ff49025ec085..ff49025ec085 100644 --- a/drivers/platform/x86/intel_speed_select_if/isst_if_mmio.c +++ b/drivers/platform/x86/intel/speed_select_if/isst_if_mmio.c diff --git a/drivers/platform/x86/intel/telemetry/Kconfig b/drivers/platform/x86/intel/telemetry/Kconfig new file mode 100644 index 000000000000..da887bd03731 --- /dev/null +++ b/drivers/platform/x86/intel/telemetry/Kconfig @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Intel x86 Platform Specific Drivers +# + +config INTEL_TELEMETRY + tristate "Intel SoC Telemetry driver" + depends on X86_64 + depends on MFD_INTEL_PMC_BXT + depends on INTEL_PUNIT_IPC + help + This driver provides interfaces to configure and use + telemetry for Intel SoC from Apollo Lake onwards. + It is also used to get various SoC events and parameters + directly via debugfs files. Various tools may use + this interface for SoC state monitoring. diff --git a/drivers/platform/x86/intel/telemetry/Makefile b/drivers/platform/x86/intel/telemetry/Makefile new file mode 100644 index 000000000000..bfdba5b6c59a --- /dev/null +++ b/drivers/platform/x86/intel/telemetry/Makefile @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Intel x86 Platform Specific Drivers +# + +intel_telemetry_core-y := core.o +obj-$(CONFIG_INTEL_TELEMETRY) += intel_telemetry_core.o +intel_telemetry_pltdrv-y := pltdrv.o +obj-$(CONFIG_INTEL_TELEMETRY) += intel_telemetry_pltdrv.o +intel_telemetry_debugfs-y := debugfs.o +obj-$(CONFIG_INTEL_TELEMETRY) += intel_telemetry_debugfs.o diff --git a/drivers/platform/x86/intel_telemetry_core.c b/drivers/platform/x86/intel/telemetry/core.c index fdf55b5d6948..fdf55b5d6948 100644 --- a/drivers/platform/x86/intel_telemetry_core.c +++ b/drivers/platform/x86/intel/telemetry/core.c diff --git a/drivers/platform/x86/intel_telemetry_debugfs.c b/drivers/platform/x86/intel/telemetry/debugfs.c index 1d4d0fbfd63c..1d4d0fbfd63c 100644 --- a/drivers/platform/x86/intel_telemetry_debugfs.c +++ b/drivers/platform/x86/intel/telemetry/debugfs.c diff --git a/drivers/platform/x86/intel_telemetry_pltdrv.c b/drivers/platform/x86/intel/telemetry/pltdrv.c index 405dea87de6b..405dea87de6b 100644 --- a/drivers/platform/x86/intel_telemetry_pltdrv.c +++ b/drivers/platform/x86/intel/telemetry/pltdrv.c diff --git a/drivers/platform/x86/intel_turbo_max_3.c b/drivers/platform/x86/intel/turbo_max_3.c index 892140b62898..892140b62898 100644 --- a/drivers/platform/x86/intel_turbo_max_3.c +++ b/drivers/platform/x86/intel/turbo_max_3.c diff --git a/drivers/platform/x86/intel-uncore-frequency.c b/drivers/platform/x86/intel/uncore-frequency.c index 3ee4c5c8a64f..3ee4c5c8a64f 100644 --- a/drivers/platform/x86/intel-uncore-frequency.c +++ b/drivers/platform/x86/intel/uncore-frequency.c diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel/vbtn.c index 309166431063..15f013af9e62 100644 --- a/drivers/platform/x86/intel-vbtn.c +++ b/drivers/platform/x86/intel/vbtn.c @@ -14,7 +14,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/suspend.h> -#include "dual_accel_detect.h" +#include "../dual_accel_detect.h" /* Returned when NOT in tablet mode on some HP Stream x360 11 models */ #define VGBS_TABLET_MODE_FLAG_ALT 0x10 diff --git a/drivers/platform/x86/intel/wmi/Kconfig b/drivers/platform/x86/intel/wmi/Kconfig new file mode 100644 index 000000000000..8e159f712179 --- /dev/null +++ b/drivers/platform/x86/intel/wmi/Kconfig @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Intel x86 Platform Specific Drivers +# + +config INTEL_WMI + bool + +config INTEL_WMI_SBL_FW_UPDATE + tristate "Intel WMI Slim Bootloader firmware update signaling driver" + depends on ACPI_WMI + select INTEL_WMI + help + Say Y here if you want to be able to use the WMI interface to signal + Slim Bootloader to trigger update on next reboot. + + To compile this driver as a module, choose M here: the module will + be called intel-wmi-sbl-fw-update. + +config INTEL_WMI_THUNDERBOLT + tristate "Intel WMI thunderbolt force power driver" + depends on ACPI_WMI + select INTEL_WMI + help + Say Y here if you want to be able to use the WMI interface on select + systems to force the power control of Intel Thunderbolt controllers. + This is useful for updating the firmware when devices are not plugged + into the controller. + + To compile this driver as a module, choose M here: the module will + be called intel-wmi-thunderbolt. diff --git a/drivers/platform/x86/intel/wmi/Makefile b/drivers/platform/x86/intel/wmi/Makefile new file mode 100644 index 000000000000..c2d56d25dea0 --- /dev/null +++ b/drivers/platform/x86/intel/wmi/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Intel x86 Platform Specific Drivers +# + +intel-wmi-sbl-fw-update-y := sbl-fw-update.o +obj-$(CONFIG_INTEL_WMI_SBL_FW_UPDATE) += intel-wmi-sbl-fw-update.o +intel-wmi-thunderbolt-y := thunderbolt.o +obj-$(CONFIG_INTEL_WMI_THUNDERBOLT) += intel-wmi-thunderbolt.o diff --git a/drivers/platform/x86/intel-wmi-sbl-fw-update.c b/drivers/platform/x86/intel/wmi/sbl-fw-update.c index 3c86e0108a24..3c86e0108a24 100644 --- a/drivers/platform/x86/intel-wmi-sbl-fw-update.c +++ b/drivers/platform/x86/intel/wmi/sbl-fw-update.c diff --git a/drivers/platform/x86/intel-wmi-thunderbolt.c b/drivers/platform/x86/intel/wmi/thunderbolt.c index 4ae87060d18b..4ae87060d18b 100644 --- a/drivers/platform/x86/intel-wmi-thunderbolt.c +++ b/drivers/platform/x86/intel/wmi/thunderbolt.c diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c index 9171a46a9e3f..bfa0cc20750d 100644 --- a/drivers/platform/x86/intel_scu_ipc.c +++ b/drivers/platform/x86/intel_scu_ipc.c @@ -457,7 +457,7 @@ int intel_scu_ipc_dev_simple_command(struct intel_scu_ipc_dev *scu, int cmd, EXPORT_SYMBOL(intel_scu_ipc_dev_simple_command); /** - * intel_scu_ipc_command_with_size() - Command with data + * intel_scu_ipc_dev_command_with_size() - Command with data * @scu: Optional SCU IPC instance * @cmd: Command * @sub: Sub type diff --git a/drivers/platform/x86/lg-laptop.c b/drivers/platform/x86/lg-laptop.c index 20145b539335..3e520d5bca07 100644 --- a/drivers/platform/x86/lg-laptop.c +++ b/drivers/platform/x86/lg-laptop.c @@ -8,6 +8,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/acpi.h> +#include <linux/dmi.h> #include <linux/input.h> #include <linux/input/sparse-keymap.h> #include <linux/kernel.h> @@ -16,11 +17,12 @@ #include <linux/platform_device.h> #include <linux/types.h> -#define LED_DEVICE(_name, max) struct led_classdev _name = { \ +#define LED_DEVICE(_name, max, flag) struct led_classdev _name = { \ .name = __stringify(_name), \ .max_brightness = max, \ .brightness_set = _name##_set, \ .brightness_get = _name##_get, \ + .flags = flag, \ } MODULE_AUTHOR("Matan Ziv-Av"); @@ -69,9 +71,13 @@ static u32 inited; #define INIT_INPUT_ACPI 0x04 #define INIT_SPARSE_KEYMAP 0x80 +static int battery_limit_use_wmbb; +static struct led_classdev kbd_backlight; +static enum led_brightness get_kbd_backlight_level(void); + static const struct key_entry wmi_keymap[] = { {KE_KEY, 0x70, {KEY_F15} }, /* LG control panel (F1) */ - {KE_KEY, 0x74, {KEY_F13} }, /* Touchpad toggle (F5) */ + {KE_KEY, 0x74, {KEY_F21} }, /* Touchpad toggle (F5) */ {KE_KEY, 0xf020000, {KEY_F14} }, /* Read mode (F9) */ {KE_KEY, 0x10000000, {KEY_F16} },/* Keyboard backlight (F8) - pressing * this key both sends an event and @@ -214,10 +220,16 @@ static void wmi_notify(u32 value, void *context) int eventcode = obj->integer.value; struct key_entry *key; - key = - sparse_keymap_entry_from_scancode(wmi_input_dev, eventcode); - if (key && key->type == KE_KEY) - sparse_keymap_report_entry(wmi_input_dev, key, 1, true); + if (eventcode == 0x10000000) { + led_classdev_notify_brightness_hw_changed( + &kbd_backlight, get_kbd_backlight_level()); + } else { + key = sparse_keymap_entry_from_scancode( + wmi_input_dev, eventcode); + if (key && key->type == KE_KEY) + sparse_keymap_report_entry(wmi_input_dev, + key, 1, true); + } } pr_debug("Type: %i Eventcode: 0x%llx\n", obj->type, @@ -461,7 +473,10 @@ static ssize_t battery_care_limit_store(struct device *dev, if (value == 100 || value == 80) { union acpi_object *r; - r = lg_wmab(WM_BATT_LIMIT, WM_SET, value); + if (battery_limit_use_wmbb) + r = lg_wmbb(WMBB_BATT_LIMIT, WM_SET, value); + else + r = lg_wmab(WM_BATT_LIMIT, WM_SET, value); if (!r) return -EIO; @@ -479,16 +494,29 @@ static ssize_t battery_care_limit_show(struct device *dev, unsigned int status; union acpi_object *r; - r = lg_wmab(WM_BATT_LIMIT, WM_GET, 0); - if (!r) - return -EIO; + if (battery_limit_use_wmbb) { + r = lg_wmbb(WMBB_BATT_LIMIT, WM_GET, 0); + if (!r) + return -EIO; - if (r->type != ACPI_TYPE_INTEGER) { - kfree(r); - return -EIO; - } + if (r->type != ACPI_TYPE_BUFFER) { + kfree(r); + return -EIO; + } - status = r->integer.value; + status = r->buffer.pointer[0x10]; + } else { + r = lg_wmab(WM_BATT_LIMIT, WM_GET, 0); + if (!r) + return -EIO; + + if (r->type != ACPI_TYPE_INTEGER) { + kfree(r); + return -EIO; + } + + status = r->integer.value; + } kfree(r); if (status != 80 && status != 100) status = 0; @@ -529,7 +557,7 @@ static enum led_brightness tpad_led_get(struct led_classdev *cdev) return ggov(GOV_TLED) > 0 ? LED_ON : LED_OFF; } -static LED_DEVICE(tpad_led, 1); +static LED_DEVICE(tpad_led, 1, 0); static void kbd_backlight_set(struct led_classdev *cdev, enum led_brightness brightness) @@ -546,7 +574,7 @@ static void kbd_backlight_set(struct led_classdev *cdev, kfree(r); } -static enum led_brightness kbd_backlight_get(struct led_classdev *cdev) +static enum led_brightness get_kbd_backlight_level(void) { union acpi_object *r; int val; @@ -577,7 +605,12 @@ static enum led_brightness kbd_backlight_get(struct led_classdev *cdev) return val; } -static LED_DEVICE(kbd_backlight, 255); +static enum led_brightness kbd_backlight_get(struct led_classdev *cdev) +{ + return get_kbd_backlight_level(); +} + +static LED_DEVICE(kbd_backlight, 255, LED_BRIGHT_HW_CHANGED); static void wmi_input_destroy(void) { @@ -602,6 +635,8 @@ static struct platform_driver pf_driver = { static int acpi_add(struct acpi_device *device) { int ret; + const char *product; + int year = 2017; if (pf_device) return 0; @@ -619,6 +654,42 @@ static int acpi_add(struct acpi_device *device) pr_err("unable to register platform device\n"); goto out_platform_registered; } + product = dmi_get_system_info(DMI_PRODUCT_NAME); + if (strlen(product) > 4) + switch (product[4]) { + case '5': + case '6': + year = 2016; + break; + case '7': + year = 2017; + break; + case '8': + year = 2018; + break; + case '9': + year = 2019; + break; + case '0': + if (strlen(product) > 5) + switch (product[5]) { + case 'N': + year = 2020; + break; + case 'P': + year = 2021; + break; + default: + year = 2022; + } + break; + default: + year = 2019; + } + pr_info("product: %s year: %d\n", product, year); + + if (year >= 2019) + battery_limit_use_wmbb = 1; ret = sysfs_create_group(&pf_device->dev.kobj, &dev_attribute_group); if (ret) diff --git a/drivers/platform/x86/meraki-mx100.c b/drivers/platform/x86/meraki-mx100.c new file mode 100644 index 000000000000..3751ed36a980 --- /dev/null +++ b/drivers/platform/x86/meraki-mx100.c @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/* + * Cisco Meraki MX100 (Tinkerbell) board platform driver + * + * Based off of arch/x86/platform/meraki/tink.c from the + * Meraki GPL release meraki-firmware-sources-r23-20150601 + * + * Format inspired by platform/x86/pcengines-apuv2.c + * + * Copyright (C) 2021 Chris Blake <chrisrblake93@gmail.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/dmi.h> +#include <linux/err.h> +#include <linux/gpio_keys.h> +#include <linux/gpio/machine.h> +#include <linux/input.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#define TINK_GPIO_DRIVER_NAME "gpio_ich" + +/* LEDs */ +static const struct gpio_led tink_leds[] = { + { + .name = "mx100:green:internet", + .default_trigger = "default-on", + }, + { + .name = "mx100:green:lan2", + }, + { + .name = "mx100:green:lan3", + }, + { + .name = "mx100:green:lan4", + }, + { + .name = "mx100:green:lan5", + }, + { + .name = "mx100:green:lan6", + }, + { + .name = "mx100:green:lan7", + }, + { + .name = "mx100:green:lan8", + }, + { + .name = "mx100:green:lan9", + }, + { + .name = "mx100:green:lan10", + }, + { + .name = "mx100:green:lan11", + }, + { + .name = "mx100:green:ha", + }, + { + .name = "mx100:orange:ha", + }, + { + .name = "mx100:green:usb", + }, + { + .name = "mx100:orange:usb", + }, +}; + +static const struct gpio_led_platform_data tink_leds_pdata = { + .num_leds = ARRAY_SIZE(tink_leds), + .leds = tink_leds, +}; + +static struct gpiod_lookup_table tink_leds_table = { + .dev_id = "leds-gpio", + .table = { + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 11, + NULL, 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 18, + NULL, 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 20, + NULL, 2, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 22, + NULL, 3, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 23, + NULL, 4, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 32, + NULL, 5, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 34, + NULL, 6, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 35, + NULL, 7, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 36, + NULL, 8, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 37, + NULL, 9, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 48, + NULL, 10, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 16, + NULL, 11, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 7, + NULL, 12, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 21, + NULL, 13, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 19, + NULL, 14, GPIO_ACTIVE_LOW), + {} /* Terminating entry */ + } +}; + +/* Reset Button */ +static struct gpio_keys_button tink_buttons[] = { + { + .desc = "Reset", + .type = EV_KEY, + .code = KEY_RESTART, + .active_low = 1, + .debounce_interval = 100, + }, +}; + +static const struct gpio_keys_platform_data tink_buttons_pdata = { + .buttons = tink_buttons, + .nbuttons = ARRAY_SIZE(tink_buttons), + .poll_interval = 20, + .rep = 0, + .name = "mx100-keys", +}; + +static struct gpiod_lookup_table tink_keys_table = { + .dev_id = "gpio-keys-polled", + .table = { + GPIO_LOOKUP_IDX(TINK_GPIO_DRIVER_NAME, 60, + NULL, 0, GPIO_ACTIVE_LOW), + {} /* Terminating entry */ + } +}; + +/* Board setup */ +static const struct dmi_system_id tink_systems[] __initconst = { + { + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Cisco"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MX100-HW"), + }, + }, + {} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(dmi, tink_systems); + +static struct platform_device *tink_leds_pdev; +static struct platform_device *tink_keys_pdev; + +static struct platform_device * __init tink_create_dev( + const char *name, const void *pdata, size_t sz) +{ + struct platform_device *pdev; + + pdev = platform_device_register_data(NULL, + name, PLATFORM_DEVID_NONE, pdata, sz); + if (IS_ERR(pdev)) + pr_err("failed registering %s: %ld\n", name, PTR_ERR(pdev)); + + return pdev; +} + +static int __init tink_board_init(void) +{ + int ret; + + if (!dmi_first_match(tink_systems)) + return -ENODEV; + + /* + * We need to make sure that GPIO60 isn't set to native mode as is default since it's our + * Reset Button. To do this, write to GPIO_USE_SEL2 to have GPIO60 set to GPIO mode. + * This is documented on page 1609 of the PCH datasheet, order number 327879-005US + */ + outl(inl(0x530) | BIT(28), 0x530); + + gpiod_add_lookup_table(&tink_leds_table); + gpiod_add_lookup_table(&tink_keys_table); + + tink_leds_pdev = tink_create_dev("leds-gpio", + &tink_leds_pdata, sizeof(tink_leds_pdata)); + if (IS_ERR(tink_leds_pdev)) { + ret = PTR_ERR(tink_leds_pdev); + goto err; + } + + tink_keys_pdev = tink_create_dev("gpio-keys-polled", + &tink_buttons_pdata, sizeof(tink_buttons_pdata)); + if (IS_ERR(tink_keys_pdev)) { + ret = PTR_ERR(tink_keys_pdev); + platform_device_unregister(tink_leds_pdev); + goto err; + } + + return 0; + +err: + gpiod_remove_lookup_table(&tink_keys_table); + gpiod_remove_lookup_table(&tink_leds_table); + return ret; +} +module_init(tink_board_init); + +static void __exit tink_board_exit(void) +{ + platform_device_unregister(tink_keys_pdev); + platform_device_unregister(tink_leds_pdev); + gpiod_remove_lookup_table(&tink_keys_table); + gpiod_remove_lookup_table(&tink_leds_table); +} +module_exit(tink_board_exit); + +MODULE_AUTHOR("Chris Blake <chrisrblake93@gmail.com>"); +MODULE_DESCRIPTION("Cisco Meraki MX100 Platform Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:meraki-mx100"); diff --git a/drivers/platform/x86/think-lmi.c b/drivers/platform/x86/think-lmi.c index 6cfed4427fb0..9472aae72df2 100644 --- a/drivers/platform/x86/think-lmi.c +++ b/drivers/platform/x86/think-lmi.c @@ -20,6 +20,10 @@ #include "firmware_attributes_class.h" #include "think-lmi.h" +static bool debug_support; +module_param(debug_support, bool, 0444); +MODULE_PARM_DESC(debug_support, "Enable debug command support"); + /* * Name: * Lenovo_BiosSetting @@ -116,6 +120,14 @@ */ #define LENOVO_GET_BIOS_SELECTIONS_GUID "7364651A-132F-4FE7-ADAA-40C6C7EE2E3B" +/* + * Name: + * Lenovo_DebugCmdGUID + * Description + * Debug entry GUID method for entering debug commands to the BIOS + */ +#define LENOVO_DEBUG_CMD_GUID "7FF47003-3B6C-4E5E-A227-E979824A85D1" + #define TLMI_POP_PWD (1 << 0) #define TLMI_PAP_PWD (1 << 1) #define to_tlmi_pwd_setting(kobj) container_of(kobj, struct tlmi_pwd_setting, kobj) @@ -660,6 +672,64 @@ static ssize_t pending_reboot_show(struct kobject *kobj, struct kobj_attribute * static struct kobj_attribute pending_reboot = __ATTR_RO(pending_reboot); +/* ---- Debug interface--------------------------------------------------------- */ +static ssize_t debug_cmd_store(struct kobject *kobj, struct kobj_attribute *attr, + const char *buf, size_t count) +{ + char *set_str = NULL, *new_setting = NULL; + char *auth_str = NULL; + char *p; + int ret; + + if (!tlmi_priv.can_debug_cmd) + return -EOPNOTSUPP; + + new_setting = kstrdup(buf, GFP_KERNEL); + if (!new_setting) + return -ENOMEM; + + /* Strip out CR if one is present */ + p = strchrnul(new_setting, '\n'); + *p = '\0'; + + if (tlmi_priv.pwd_admin->valid && tlmi_priv.pwd_admin->password[0]) { + auth_str = kasprintf(GFP_KERNEL, "%s,%s,%s;", + tlmi_priv.pwd_admin->password, + encoding_options[tlmi_priv.pwd_admin->encoding], + tlmi_priv.pwd_admin->kbdlang); + if (!auth_str) { + ret = -ENOMEM; + goto out; + } + } + + if (auth_str) + set_str = kasprintf(GFP_KERNEL, "%s,%s", new_setting, auth_str); + else + set_str = kasprintf(GFP_KERNEL, "%s;", new_setting); + if (!set_str) { + ret = -ENOMEM; + goto out; + } + + ret = tlmi_simple_call(LENOVO_DEBUG_CMD_GUID, set_str); + if (ret) + goto out; + + if (!ret && !tlmi_priv.pending_changes) { + tlmi_priv.pending_changes = true; + /* let userland know it may need to check reboot pending again */ + kobject_uevent(&tlmi_priv.class_dev->kobj, KOBJ_CHANGE); + } +out: + kfree(auth_str); + kfree(set_str); + kfree(new_setting); + return ret ?: count; +} + +static struct kobj_attribute debug_cmd = __ATTR_WO(debug_cmd); + /* ---- Initialisation --------------------------------------------------------- */ static void tlmi_release_attr(void) { @@ -673,6 +743,8 @@ static void tlmi_release_attr(void) } } sysfs_remove_file(&tlmi_priv.attribute_kset->kobj, &pending_reboot.attr); + if (tlmi_priv.can_debug_cmd && debug_support) + sysfs_remove_file(&tlmi_priv.attribute_kset->kobj, &debug_cmd.attr); kset_unregister(tlmi_priv.attribute_kset); /* Authentication structures */ @@ -737,6 +809,11 @@ static int tlmi_sysfs_init(void) if (ret) goto fail_create_attr; + if (tlmi_priv.can_debug_cmd && debug_support) { + ret = sysfs_create_file(&tlmi_priv.attribute_kset->kobj, &debug_cmd.attr); + if (ret) + goto fail_create_attr; + } /* Create authentication entries */ tlmi_priv.authentication_kset = kset_create_and_add("authentication", NULL, &tlmi_priv.class_dev->kobj); @@ -793,6 +870,9 @@ static int tlmi_analyze(void) if (wmi_has_guid(LENOVO_BIOS_PASSWORD_SETTINGS_GUID)) tlmi_priv.can_get_password_settings = true; + if (wmi_has_guid(LENOVO_DEBUG_CMD_GUID)) + tlmi_priv.can_debug_cmd = true; + /* * Try to find the number of valid settings of this machine * and use it to create sysfs attributes. diff --git a/drivers/platform/x86/think-lmi.h b/drivers/platform/x86/think-lmi.h index eb598846628a..f8e26823075f 100644 --- a/drivers/platform/x86/think-lmi.h +++ b/drivers/platform/x86/think-lmi.h @@ -61,6 +61,7 @@ struct think_lmi { bool can_set_bios_password; bool can_get_password_settings; bool pending_changes; + bool can_debug_cmd; struct tlmi_attr_setting *setting[TLMI_SETTINGS_COUNT]; struct device *class_dev; diff --git a/drivers/thermal/intel/Kconfig b/drivers/thermal/intel/Kconfig index e4299ca3423c..c83ea5d04a1d 100644 --- a/drivers/thermal/intel/Kconfig +++ b/drivers/thermal/intel/Kconfig @@ -90,3 +90,12 @@ config INTEL_TCC_COOLING Note that, on different platforms, the behavior might be different on how fast the setting takes effect, and how much the CPU frequency is reduced. + +config INTEL_MENLOW + tristate "Thermal Management driver for Intel menlow platform" + depends on ACPI_THERMAL + help + ACPI thermal management enhancement driver on + Intel Menlow platform. + + If unsure, say N. diff --git a/drivers/thermal/intel/Makefile b/drivers/thermal/intel/Makefile index 5ff2afa388f7..960b56268b4a 100644 --- a/drivers/thermal/intel/Makefile +++ b/drivers/thermal/intel/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) += intel_bxt_pmic_thermal.o obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o obj-$(CONFIG_INTEL_TCC_COOLING) += intel_tcc_cooling.o obj-$(CONFIG_X86_THERMAL_VECTOR) += therm_throt.o +obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o diff --git a/drivers/platform/x86/intel_menlow.c b/drivers/thermal/intel/intel_menlow.c index 101d7e791a13..101d7e791a13 100644 --- a/drivers/platform/x86/intel_menlow.c +++ b/drivers/thermal/intel/intel_menlow.c diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 3eb60a2e9e61..2ce3efbe9198 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -1010,6 +1010,7 @@ struct acpi_resource_i2c_serialbus; #if IS_ENABLED(CONFIG_ACPI) bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares, struct acpi_resource_i2c_serialbus **i2c); +int i2c_acpi_client_count(struct acpi_device *adev); u32 i2c_acpi_find_bus_speed(struct device *dev); struct i2c_client *i2c_acpi_new_device(struct device *dev, int index, struct i2c_board_info *info); @@ -1020,6 +1021,10 @@ static inline bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares, { return false; } +static inline int i2c_acpi_client_count(struct acpi_device *adev) +{ + return 0; +} static inline u32 i2c_acpi_find_bus_speed(struct device *dev) { return 0; diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h index 2f274cf52805..17dc5cb6f3f2 100644 --- a/include/linux/platform_data/x86/asus-wmi.h +++ b/include/linux/platform_data/x86/asus-wmi.h @@ -61,6 +61,7 @@ #define ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY 0x00120075 /* Misc */ +#define ASUS_WMI_DEVID_PANEL_OD 0x00050019 #define ASUS_WMI_DEVID_CAMERA 0x00060013 #define ASUS_WMI_DEVID_LID_FLIP 0x00060062 @@ -89,6 +90,12 @@ /* Keyboard dock */ #define ASUS_WMI_DEVID_KBD_DOCK 0x00120063 +/* dgpu on/off */ +#define ASUS_WMI_DEVID_EGPU 0x00090019 + +/* dgpu on/off */ +#define ASUS_WMI_DEVID_DGPU 0x00090020 + /* DSTS masks */ #define ASUS_WMI_DSTS_STATUS_BIT 0x00000001 #define ASUS_WMI_DSTS_UNKNOWN_BIT 0x00000002 |