diff options
| -rw-r--r-- | Documentation/hwmon/nct7904 | 60 | ||||
| -rw-r--r-- | drivers/hwmon/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hwmon/nct7904.c | 592 |
4 files changed, 663 insertions, 0 deletions
diff --git a/Documentation/hwmon/nct7904 b/Documentation/hwmon/nct7904 new file mode 100644 index 000000000000..014f112e2a14 --- /dev/null +++ b/Documentation/hwmon/nct7904 @@ -0,0 +1,60 @@ +Kernel driver nct7904 +==================== + +Supported chip: + * Nuvoton NCT7904D + Prefix: nct7904 + Addresses: I2C 0x2d, 0x2e + Datasheet: Publicly available at Nuvoton website + http://www.nuvoton.com/ + +Author: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru> + + +Description +----------- + +The NCT7904D is a hardware monitor supporting up to 20 voltage sensors, +internal temperature sensor, Intel PECI and AMD SB-TSI CPU temperature +interface, up to 12 fan tachometer inputs, up to 4 fan control channels +with SmartFan. + + +Sysfs entries +------------- + +Currently, the driver supports only the following features: + +in[1-20]_input Input voltage measurements (mV) + +fan[1-12]_input Fan tachometer measurements (rpm) + +temp1_input Local temperature (1/1000 degree, + 0.125 degree resolution) + +temp[2-9]_input CPU temperatures (1/1000 degree, + 0.125 degree resolution) + +fan[1-4]_mode R/W, 0/1 for manual or SmartFan mode + Setting SmartFan mode is supported only if it has been + previously configured by BIOS (or configuration EEPROM) + +fan[1-4]_pwm R/O in SmartFan mode, R/W in manual control mode + +The driver checks sensor control registers and does not export the sensors +that are not enabled. Anyway, a sensor that is enabled may actually be not +connected and thus provide zero readings. + + +Limitations +----------- + +The following features are not supported in current version: + + - SmartFan control + - Watchdog + - GPIO + - external temperature sensors + - SMI + - min/max values + - many other... diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 4b40ea79b20f..2a5dd697c142 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1145,6 +1145,16 @@ config SENSORS_NCT7802 This driver can also be built as a module. If so, the module will be called nct7802. +config SENSORS_NCT7904 + tristate "Nuvoton NCT7904" + depends on I2C + help + If you say yes here you get support for the Nuvoton NCT7904 + hardware monitoring chip, including manual fan speed control. + + This driver can also be built as a module. If so, the module + will be called nct7904. + config SENSORS_PCF8591 tristate "Philips PCF8591 ADC/DAC" depends on I2C diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 6c941472e707..b4a40f17e2aa 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -120,6 +120,7 @@ obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o obj-$(CONFIG_SENSORS_NCT6683) += nct6683.o obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o obj-$(CONFIG_SENSORS_NCT7802) += nct7802.o +obj-$(CONFIG_SENSORS_NCT7904) += nct7904.o obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o obj-$(CONFIG_SENSORS_PC87360) += pc87360.o obj-$(CONFIG_SENSORS_PC87427) += pc87427.o diff --git a/drivers/hwmon/nct7904.c b/drivers/hwmon/nct7904.c new file mode 100644 index 000000000000..eaa8234e21d0 --- /dev/null +++ b/drivers/hwmon/nct7904.c @@ -0,0 +1,592 @@ +/* + * nct7904.c - driver for Nuvoton NCT7904D. + * + * Copyright (c) 2015 Kontron + * Author: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/device.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> + +#define VENDOR_ID_REG 0x7A /* Any bank */ +#define NUVOTON_ID 0x50 +#define CHIP_ID_REG 0x7B /* Any bank */ +#define NCT7904_ID 0xC5 +#define DEVICE_ID_REG 0x7C /* Any bank */ + +#define BANK_SEL_REG 0xFF +#define BANK_0 0x00 +#define BANK_1 0x01 +#define BANK_2 0x02 +#define BANK_3 0x03 +#define BANK_4 0x04 +#define BANK_MAX 0x04 + +#define FANIN_MAX 12 /* Counted from 1 */ +#define VSEN_MAX 21 /* VSEN1..14, 3VDD, VBAT, V3VSB, + LTD (not a voltage), VSEN17..19 */ +#define FANCTL_MAX 4 /* Counted from 1 */ +#define TCPU_MAX 8 /* Counted from 1 */ +#define TEMP_MAX 4 /* Counted from 1 */ + +#define VT_ADC_CTRL0_REG 0x20 /* Bank 0 */ +#define VT_ADC_CTRL1_REG 0x21 /* Bank 0 */ +#define VT_ADC_CTRL2_REG 0x22 /* Bank 0 */ +#define FANIN_CTRL0_REG 0x24 +#define FANIN_CTRL1_REG 0x25 +#define DTS_T_CTRL0_REG 0x26 +#define DTS_T_CTRL1_REG 0x27 +#define VT_ADC_MD_REG 0x2E + +#define VSEN1_HV_REG 0x40 /* Bank 0; 2 regs (HV/LV) per sensor */ +#define TEMP_CH1_HV_REG 0x42 /* Bank 0; same as VSEN2_HV */ +#define LTD_HV_REG 0x62 /* Bank 0; 2 regs in VSEN range */ +#define FANIN1_HV_REG 0x80 /* Bank 0; 2 regs (HV/LV) per sensor */ +#define T_CPU1_HV_REG 0xA0 /* Bank 0; 2 regs (HV/LV) per sensor */ + +#define PRTS_REG 0x03 /* Bank 2 */ +#define FANCTL1_FMR_REG 0x00 /* Bank 3; 1 reg per channel */ +#define FANCTL1_OUT_REG 0x10 /* Bank 3; 1 reg per channel */ + +static const unsigned short normal_i2c[] = { + 0x2d, 0x2e, I2C_CLIENT_END +}; + +struct nct7904_data { + struct i2c_client *client; + struct mutex bank_lock; + int bank_sel; + u32 fanin_mask; + u32 vsen_mask; + u32 tcpu_mask; + u8 fan_mode[FANCTL_MAX]; +}; + +/* Access functions */ +static int nct7904_bank_lock(struct nct7904_data *data, unsigned bank) +{ + int ret; + + mutex_lock(&data->bank_lock); + if (data->bank_sel == bank) + return 0; + ret = i2c_smbus_write_byte_data(data->client, BANK_SEL_REG, bank); + if (ret == 0) + data->bank_sel = bank; + else + data->bank_sel = -1; + return ret; +} + +static inline void nct7904_bank_release(struct nct7904_data *data) +{ + mutex_unlock(&data->bank_lock); +} + +/* Read 1-byte register. Returns unsigned reg or -ERRNO on error. */ +static int nct7904_read_reg(struct nct7904_data *data, + unsigned bank, unsigned reg) +{ + struct i2c_client *client = data->client; + int ret; + + ret = nct7904_bank_lock(data, bank); + if (ret == 0) + ret = i2c_smbus_read_byte_data(client, reg); + + nct7904_bank_release(data); + return ret; +} + +/* + * Read 2-byte register. Returns register in big-endian format or + * -ERRNO on error. + */ +static int nct7904_read_reg16(struct nct7904_data *data, + unsigned bank, unsigned reg) +{ + struct i2c_client *client = data->client; + int ret, hi; + + ret = nct7904_bank_lock(data, bank); + if (ret == 0) { + ret = i2c_smbus_read_byte_data(client, reg); + if (ret >= 0) { + hi = ret; + ret = i2c_smbus_read_byte_data(client, reg + 1); + if (ret >= 0) + ret |= hi << 8; + } + } + + nct7904_bank_release(data); + return ret; +} + +/* Write 1-byte register. Returns 0 or -ERRNO on error. */ +static int nct7904_write_reg(struct nct7904_data *data, + unsigned bank, unsigned reg, u8 val) +{ + struct i2c_client *client = data->client; + int ret; + + ret = nct7904_bank_lock(data, bank); + if (ret == 0) + ret = i2c_smbus_write_byte_data(client, reg, val); + + nct7904_bank_release(data); + return ret; +} + +/* FANIN ATTR */ +static ssize_t show_fan(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct nct7904_data *data = dev_get_drvdata(dev); + int ret; + unsigned cnt, rpm; + + ret = nct7904_read_reg16(data, BANK_0, FANIN1_HV_REG + index * 2); + if (ret < 0) + return ret; + cnt = ((ret & 0xff00) >> 3) | (ret & 0x1f); + if (cnt == 0x1fff) + rpm = 0; + else + rpm = 1350000 / cnt; + return sprintf(buf, "%u\n", rpm); +} + +static umode_t nct7904_fanin_is_visible(struct kobject *kobj, + struct attribute *a, int n) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct nct7904_data *data = dev_get_drvdata(dev); + + if (data->fanin_mask & (1 << n)) + return a->mode; + return 0; +} + +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); +static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); +static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2); +static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3); +static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4); +static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 5); +static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 6); +static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_fan, NULL, 7); +static SENSOR_DEVICE_ATTR(fan9_input, S_IRUGO, show_fan, NULL, 8); +static SENSOR_DEVICE_ATTR(fan10_input, S_IRUGO, show_fan, NULL, 9); +static SENSOR_DEVICE_ATTR(fan11_input, S_IRUGO, show_fan, NULL, 10); +static SENSOR_DEVICE_ATTR(fan12_input, S_IRUGO, show_fan, NULL, 11); + +static struct attribute *nct7904_fanin_attrs[] = { + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan4_input.dev_attr.attr, + &sensor_dev_attr_fan5_input.dev_attr.attr, + &sensor_dev_attr_fan6_input.dev_attr.attr, + &sensor_dev_attr_fan7_input.dev_attr.attr, + &sensor_dev_attr_fan8_input.dev_attr.attr, + &sensor_dev_attr_fan9_input.dev_attr.attr, + &sensor_dev_attr_fan10_input.dev_attr.attr, + &sensor_dev_attr_fan11_input.dev_attr.attr, + &sensor_dev_attr_fan12_input.dev_attr.attr, + NULL +}; + +static const struct attribute_group nct7904_fanin_group = { + .attrs = nct7904_fanin_attrs, + .is_visible = nct7904_fanin_is_visible, +}; + +/* VSEN ATTR */ +static ssize_t show_voltage(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct nct7904_data *data = dev_get_drvdata(dev); + int ret; + int volt; + + ret = nct7904_read_reg16(data, BANK_0, VSEN1_HV_REG + index * 2); + if (ret < 0) + return ret; + volt = ((ret & 0xff00) >> 5) | (ret & 0x7); + if (index < 14) + volt *= 2; /* 0.002V scale */ + else + volt *= 6; /* 0.006V scale */ + + return sprintf(buf, "%d\n", volt); +} + +static ssize_t show_ltemp(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct nct7904_data *data = dev_get_drvdata(dev); + int ret; + int temp; + + ret = nct7904_read_reg16(data, BANK_0, LTD_HV_REG); + if (ret < 0) + return ret; + temp = ((ret & 0xff00) >> 5) | (ret & 0x7); + temp = sign_extend32(temp, 10) * 125; + + return sprintf(buf, "%d\n", temp); +} + +static umode_t nct7904_vsen_is_visible(struct kobject *kobj, + struct attribute *a, int n) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct nct7904_data *data = dev_get_drvdata(dev); + + if (data->vsen_mask & (1 << n)) + return a->mode; + return 0; +} + +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_voltage, NULL, 0); +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_voltage, NULL, 1); +static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_voltage, NULL, 2); +static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_voltage, NULL, 3); +static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_voltage, NULL, 4); +static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_voltage, NULL, 5); +static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_voltage, NULL, 6); +static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_voltage, NULL, 7); +static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_voltage, NULL, 8); +static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_voltage, NULL, 9); +static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_voltage, NULL, 10); +static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_voltage, NULL, 11); +static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, show_voltage, NULL, 12); +static SENSOR_DEVICE_ATTR(in14_input, S_IRUGO, show_voltage, NULL, 13); +/* + * Next 3 voltage sensors have specific names in the Nuvoton doc + * (3VDD, VBAT, 3VSB) but we use vacant numbers for them. + */ +static SENSOR_DEVICE_ATTR(in15_input, S_IRUGO, show_voltage, NULL, 14); +static SENSOR_DEVICE_ATTR(in16_input, S_IRUGO, show_voltage, NULL, 15); +static SENSOR_DEVICE_ATTR(in20_input, S_IRUGO, show_voltage, NULL, 16); +/* This is not a voltage, but a local temperature sensor. */ +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_ltemp, NULL, 0); +static SENSOR_DEVICE_ATTR(in17_input, S_IRUGO, show_voltage, NULL, 18); +static SENSOR_DEVICE_ATTR(in18_input, S_IRUGO, show_voltage, NULL, 19); +static SENSOR_DEVICE_ATTR(in19_input, S_IRUGO, show_voltage, NULL, 20); + +static struct attribute *nct7904_vsen_attrs[] = { + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in8_input.dev_attr.attr, + &sensor_dev_attr_in9_input.dev_attr.attr, + &sensor_dev_attr_in10_input.dev_attr.attr, + &sensor_dev_attr_in11_input.dev_attr.attr, + &sensor_dev_attr_in12_input.dev_attr.attr, + &sensor_dev_attr_in13_input.dev_attr.attr, + &sensor_dev_attr_in14_input.dev_attr.attr, + &sensor_dev_attr_in15_input.dev_attr.attr, + &sensor_dev_attr_in16_input.dev_attr.attr, + &sensor_dev_attr_in20_input.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_in17_input.dev_attr.attr, + &sensor_dev_attr_in18_input.dev_attr.attr, + &sensor_dev_attr_in19_input.dev_attr.attr, + NULL +}; + +static const struct attribute_group nct7904_vsen_group = { + .attrs = nct7904_vsen_attrs, + .is_visible = nct7904_vsen_is_visible, +}; + +/* CPU_TEMP ATTR */ +static ssize_t show_tcpu(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct nct7904_data *data = dev_get_drvdata(dev); + int ret; + int temp; + + ret = nct7904_read_reg16(data, BANK_0, T_CPU1_HV_REG + index * 2); + if (ret < 0) + return ret; + + temp = ((ret & 0xff00) >> 5) | (ret & 0x7); + temp = sign_extend32(temp, 10) * 125; + return sprintf(buf, "%d\n", temp); +} + +static umode_t nct7904_tcpu_is_visible(struct kobject *kobj, + struct attribute *a, int n) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct nct7904_data *data = dev_get_drvdata(dev); + + if (data->tcpu_mask & (1 << n)) + return a->mode; + return 0; +} + +/* "temp1_input" reserved for local temp */ +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_tcpu, NULL, 0); +static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_tcpu, NULL, 1); +static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_tcpu, NULL, 2); +static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_tcpu, NULL, 3); +static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO, show_tcpu, NULL, 4); +static SENSOR_DEVICE_ATTR(temp7_input, S_IRUGO, show_tcpu, NULL, 5); +static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO, show_tcpu, NULL, 6); +static SENSOR_DEVICE_ATTR(temp9_input, S_IRUGO, show_tcpu, NULL, 7); + +static struct attribute *nct7904_tcpu_attrs[] = { + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp4_input.dev_attr.attr, + &sensor_dev_attr_temp5_input.dev_attr.attr, + &sensor_dev_attr_temp6_input.dev_attr.attr, + &sensor_dev_attr_temp7_input.dev_attr.attr, + &sensor_dev_attr_temp8_input.dev_attr.attr, + &sensor_dev_attr_temp9_input.dev_attr.attr, + NULL +}; + +static const struct attribute_group nct7904_tcpu_group = { + .attrs = nct7904_tcpu_attrs, + .is_visible = nct7904_tcpu_is_visible, +}; + +/* PWM ATTR */ +static ssize_t store_pwm(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct nct7904_data *data = dev_get_drvdata(dev); + unsigned long val; + int ret; + + if (kstrtoul(buf, 10, &val) < 0) + return -EINVAL; + if (val > 255) + return -EINVAL; + + ret = nct7904_write_reg(data, BANK_3, FANCTL1_OUT_REG + index, val); + + return ret ? ret : count; +} + +static ssize_t show_pwm(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct nct7904_data *data = dev_get_drvdata(dev); + int val; + + val = nct7904_read_reg(data, BANK_3, FANCTL1_OUT_REG + index); + if (val < 0) + return val; + + return sprintf(buf, "%d\n", val); +} + +static ssize_t store_mode(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct nct7904_data *data = dev_get_drvdata(dev); + unsigned long val; + int ret; + + if (kstrtoul(buf, 10, &val) < 0) + return -EINVAL; + if (val > 1 || (val && !data->fan_mode[index])) + return -EINVAL; + + ret = nct7904_write_reg(data, BANK_3, FANCTL1_FMR_REG + index, + val ? data->fan_mode[index] : 0); + + return ret ? ret : count; +} + +/* Return 0 for manual mode or 1 for SmartFan mode */ +static ssize_t show_mode(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct nct7904_data *data = dev_get_drvdata(dev); + int val; + + val = nct7904_read_reg(data, BANK_3, FANCTL1_FMR_REG + index); + if (val < 0) + return val; + + return sprintf(buf, "%d\n", val ? 1 : 0); +} + +/* 2 attributes per channel: pwm and mode */ +static SENSOR_DEVICE_ATTR(fan1_pwm, S_IRUGO | S_IWUSR, + show_pwm, store_pwm, 0); +static SENSOR_DEVICE_ATTR(fan1_mode, S_IRUGO | S_IWUSR, + show_mode, store_mode, 0); +static SENSOR_DEVICE_ATTR(fan2_pwm, S_IRUGO | S_IWUSR, + show_pwm, store_pwm, 1); +static SENSOR_DEVICE_ATTR(fan2_mode, S_IRUGO | S_IWUSR, + show_mode, store_mode, 1); +static SENSOR_DEVICE_ATTR(fan3_pwm, S_IRUGO | S_IWUSR, + show_pwm, store_pwm, 2); +static SENSOR_DEVICE_ATTR(fan3_mode, S_IRUGO | S_IWUSR, + show_mode, store_mode, 2); +static SENSOR_DEVICE_ATTR(fan4_pwm, S_IRUGO | S_IWUSR, + show_pwm, store_pwm, 3); +static SENSOR_DEVICE_ATTR(fan4_mode, S_IRUGO | S_IWUSR, + show_mode, store_mode, 3); + +static struct attribute *nct7904_fanctl_attrs[] = { + &sensor_dev_attr_fan1_pwm.dev_attr.attr, + &sensor_dev_attr_fan1_mode.dev_attr.attr, + &sensor_dev_attr_fan2_pwm.dev_attr.attr, + &sensor_dev_attr_fan2_mode.dev_attr.attr, + &sensor_dev_attr_fan3_pwm.dev_attr.attr, + &sensor_dev_attr_fan3_mode.dev_attr.attr, + &sensor_dev_attr_fan4_pwm.dev_attr.attr, + &sensor_dev_attr_fan4_mode.dev_attr.attr, + NULL +}; + +static const struct attribute_group nct7904_fanctl_group = { + .attrs = nct7904_fanctl_attrs, +}; + +static const struct attribute_group *nct7904_groups[] = { + &nct7904_fanin_group, + &nct7904_vsen_group, + &nct7904_tcpu_group, + &nct7904_fanctl_group, + NULL +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int nct7904_detect(struct i2c_client *client, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + if (!i2c_check_functionality(adapter, + I2C_FUNC_SMBUS_READ_BYTE | + I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -ENODEV; + + /* Determine the chip type. */ + if (i2c_smbus_read_byte_data(client, VENDOR_ID_REG) != NUVOTON_ID || + i2c_smbus_read_byte_data(client, CHIP_ID_REG) != NCT7904_ID || + (i2c_smbus_read_byte_data(client, DEVICE_ID_REG) & 0xf0) != 0x50) + return -ENODEV; + + strlcpy(info->type, "nct7904", I2C_NAME_SIZE); + + return 0; +} + +static int nct7904_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct nct7904_data *data; + struct device *hwmon_dev; + struct device *dev = &client->dev; + int ret, i; + u32 mask; + + data = devm_kzalloc(dev, sizeof(struct nct7904_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = client; + mutex_init(&data->bank_lock); + data->bank_sel = -1; + + /* Setup sensor groups. */ + /* FANIN attributes */ + ret = nct7904_read_reg16(data, BANK_0, FANIN_CTRL0_REG); + if (ret < 0) + return ret; + data->fanin_mask = (ret >> 8) | ((ret & 0xff) << 8); + + /* + * VSEN attributes + * + * Note: voltage sensors overlap with external temperature + * sensors. So, if we ever decide to support the latter + * we will have to adjust 'vsen_mask' accordingly. + */ + mask = 0; + ret = nct7904_read_reg16(data, BANK_0, VT_ADC_CTRL0_REG); + if (ret >= 0) + mask = (ret >> 8) | ((ret & 0xff) << 8); + ret = nct7904_read_reg(data, BANK_0, VT_ADC_CTRL2_REG); + if (ret >= 0) + mask |= (ret << 16); + data->vsen_mask = mask; + + /* CPU_TEMP attributes */ + ret = nct7904_read_reg16(data, BANK_0, DTS_T_CTRL0_REG); + if (ret < 0) + return ret; + data->tcpu_mask = ((ret >> 8) & 0xf) | ((ret & 0xf) << 4); + + for (i = 0; i < FANCTL_MAX; i++) { + ret = nct7904_read_reg(data, BANK_3, FANCTL1_FMR_REG + i); + if (ret < 0) + return ret; + data->fan_mode[i] = ret; + } + + hwmon_dev = + devm_hwmon_device_register_with_groups(dev, client->name, data, + nct7904_groups); + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static const struct i2c_device_id nct7904_id[] = { + {"nct7904", 0}, + {} +}; + +static struct i2c_driver nct7904_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "nct7904", + }, + .probe = nct7904_probe, + .id_table = nct7904_id, + .detect = nct7904_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(nct7904_driver); + +MODULE_AUTHOR("Vadim V. Vlasov <vvlasov@dev.rtsoft.ru>"); +MODULE_DESCRIPTION("Hwmon driver for NUVOTON NCT7904"); +MODULE_LICENSE("GPL"); |