diff options
Diffstat (limited to 'drivers/nvmem')
| -rw-r--r-- | drivers/nvmem/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/nvmem/Makefile | 2 | ||||
| -rw-r--r-- | drivers/nvmem/mxs-ocotp.c | 257 |
3 files changed, 270 insertions, 0 deletions
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index 208a1cb6e4bf..a6d80536fd58 100644 --- a/drivers/nvmem/Kconfig +++ b/drivers/nvmem/Kconfig @@ -25,6 +25,17 @@ config NVMEM_IMX_OCOTP This driver can also be built as a module. If so, the module will be called nvmem-imx-ocotp. +config NVMEM_MXS_OCOTP + tristate "Freescale MXS On-Chip OTP Memory Support" + depends on ARCH_MXS || COMPILE_TEST + help + If you say Y here, you will get readonly access to the + One Time Programmable memory pages that are stored + on the Freescale i.MX23/i.MX28 processor. + + This driver can also be built as a module. If so, the module + will be called nvmem-mxs-ocotp. + config QCOM_QFPROM tristate "QCOM QFPROM Support" depends on ARCH_QCOM || COMPILE_TEST diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile index 2ddf0e88af3c..9322116d21ec 100644 --- a/drivers/nvmem/Makefile +++ b/drivers/nvmem/Makefile @@ -8,6 +8,8 @@ nvmem_core-y := core.o # Devices obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o nvmem-imx-ocotp-y := imx-ocotp.o +obj-$(CONFIG_NVMEM_MXS_OCOTP) += nvmem-mxs-ocotp.o +nvmem-mxs-ocotp-y := mxs-ocotp.o obj-$(CONFIG_QCOM_QFPROM) += nvmem_qfprom.o nvmem_qfprom-y := qfprom.o obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o diff --git a/drivers/nvmem/mxs-ocotp.c b/drivers/nvmem/mxs-ocotp.c new file mode 100644 index 000000000000..8ba19bba3156 --- /dev/null +++ b/drivers/nvmem/mxs-ocotp.c @@ -0,0 +1,257 @@ +/* + * Freescale MXS On-Chip OTP driver + * + * Copyright (C) 2015 Stefan Wahren <stefan.wahren@i2se.com> + * + * Based on the driver from Huang Shijie and Christoph G. Baumann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/nvmem-provider.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/stmp_device.h> + +/* OCOTP registers and bits */ + +#define BM_OCOTP_CTRL_RD_BANK_OPEN BIT(12) +#define BM_OCOTP_CTRL_ERROR BIT(9) +#define BM_OCOTP_CTRL_BUSY BIT(8) + +#define OCOTP_TIMEOUT 10000 +#define OCOTP_DATA_OFFSET 0x20 + +struct mxs_ocotp { + struct clk *clk; + void __iomem *base; + struct nvmem_device *nvmem; +}; + +static int mxs_ocotp_wait(struct mxs_ocotp *otp) +{ + int timeout = OCOTP_TIMEOUT; + unsigned int status = 0; + + while (timeout--) { + status = readl(otp->base); + + if (!(status & (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR))) + break; + + cpu_relax(); + } + + if (status & BM_OCOTP_CTRL_BUSY) + return -EBUSY; + else if (status & BM_OCOTP_CTRL_ERROR) + return -EIO; + + return 0; +} + +static int mxs_ocotp_read(void *context, const void *reg, size_t reg_size, + void *val, size_t val_size) +{ + struct mxs_ocotp *otp = context; + unsigned int offset = *(u32 *)reg; + u32 *buf = val; + int ret; + + ret = clk_enable(otp->clk); + if (ret) + return ret; + + writel(BM_OCOTP_CTRL_ERROR, otp->base + STMP_OFFSET_REG_CLR); + + ret = mxs_ocotp_wait(otp); + if (ret) + goto disable_clk; + + /* open OCOTP banks for read */ + writel(BM_OCOTP_CTRL_RD_BANK_OPEN, otp->base + STMP_OFFSET_REG_SET); + + /* approximately wait 33 hclk cycles */ + udelay(1); + + ret = mxs_ocotp_wait(otp); + if (ret) + goto close_banks; + + while (val_size) { + if ((offset < OCOTP_DATA_OFFSET) || (offset % 16)) { + /* fill up non-data register */ + *buf = 0; + } else { + *buf = readl(otp->base + offset); + } + + buf++; + val_size--; + offset += reg_size; + } + +close_banks: + /* close banks for power saving */ + writel(BM_OCOTP_CTRL_RD_BANK_OPEN, otp->base + STMP_OFFSET_REG_CLR); + +disable_clk: + clk_disable(otp->clk); + + return ret; +} + +static int mxs_ocotp_write(void *context, const void *data, size_t count) +{ + /* We don't want to support writing */ + return 0; +} + +static bool mxs_ocotp_writeable_reg(struct device *dev, unsigned int reg) +{ + return false; +} + +static struct nvmem_config ocotp_config = { + .name = "mxs-ocotp", + .owner = THIS_MODULE, +}; + +static const struct regmap_range imx23_ranges[] = { + regmap_reg_range(OCOTP_DATA_OFFSET, 0x210), +}; + +static const struct regmap_access_table imx23_access = { + .yes_ranges = imx23_ranges, + .n_yes_ranges = ARRAY_SIZE(imx23_ranges), +}; + +static const struct regmap_range imx28_ranges[] = { + regmap_reg_range(OCOTP_DATA_OFFSET, 0x290), +}; + +static const struct regmap_access_table imx28_access = { + .yes_ranges = imx28_ranges, + .n_yes_ranges = ARRAY_SIZE(imx28_ranges), +}; + +static struct regmap_bus mxs_ocotp_bus = { + .read = mxs_ocotp_read, + .write = mxs_ocotp_write, /* make regmap_init() happy */ + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, + .val_format_endian_default = REGMAP_ENDIAN_NATIVE, +}; + +static struct regmap_config mxs_ocotp_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 16, + .writeable_reg = mxs_ocotp_writeable_reg, +}; + +static const struct of_device_id mxs_ocotp_match[] = { + { .compatible = "fsl,imx23-ocotp", .data = &imx23_access }, + { .compatible = "fsl,imx28-ocotp", .data = &imx28_access }, + { /* sentinel */}, +}; +MODULE_DEVICE_TABLE(of, mxs_ocotp_match); + +static int mxs_ocotp_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mxs_ocotp *otp; + struct resource *res; + const struct of_device_id *match; + struct regmap *regmap; + const struct regmap_access_table *access; + int ret; + + match = of_match_device(dev->driver->of_match_table, dev); + if (!match || !match->data) + return -EINVAL; + + otp = devm_kzalloc(dev, sizeof(*otp), GFP_KERNEL); + if (!otp) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + otp->base = devm_ioremap_resource(dev, res); + if (IS_ERR(otp->base)) + return PTR_ERR(otp->base); + + otp->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(otp->clk)) + return PTR_ERR(otp->clk); + + ret = clk_prepare(otp->clk); + if (ret < 0) { + dev_err(dev, "failed to prepare clk: %d\n", ret); + return ret; + } + + access = match->data; + mxs_ocotp_config.rd_table = access; + mxs_ocotp_config.max_register = access->yes_ranges[0].range_max; + + regmap = devm_regmap_init(dev, &mxs_ocotp_bus, otp, &mxs_ocotp_config); + if (IS_ERR(regmap)) { + dev_err(dev, "regmap init failed\n"); + ret = PTR_ERR(regmap); + goto err_clk; + } + + ocotp_config.dev = dev; + otp->nvmem = nvmem_register(&ocotp_config); + if (IS_ERR(otp->nvmem)) { + ret = PTR_ERR(otp->nvmem); + goto err_clk; + } + + platform_set_drvdata(pdev, otp); + + return 0; + +err_clk: + clk_unprepare(otp->clk); + + return ret; +} + +static int mxs_ocotp_remove(struct platform_device *pdev) +{ + struct mxs_ocotp *otp = platform_get_drvdata(pdev); + + clk_unprepare(otp->clk); + + return nvmem_unregister(otp->nvmem); +} + +static struct platform_driver mxs_ocotp_driver = { + .probe = mxs_ocotp_probe, + .remove = mxs_ocotp_remove, + .driver = { + .name = "mxs-ocotp", + .of_match_table = mxs_ocotp_match, + }, +}; + +module_platform_driver(mxs_ocotp_driver); +MODULE_AUTHOR("Stefan Wahren <stefan.wahren@i2se.com>"); +MODULE_DESCRIPTION("driver for OCOTP in i.MX23/i.MX28"); +MODULE_LICENSE("GPL v2"); |