aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci')
-rw-r--r--drivers/pci/controller/pci-hyperv.c4
-rw-r--r--drivers/pci/controller/pci-thunder-ecam.c4
-rw-r--r--drivers/pci/controller/pci-xgene-msi.c2
-rw-r--r--drivers/pci/controller/pcie-brcmstb.c2
-rw-r--r--drivers/pci/controller/pcie-iproc.c2
-rw-r--r--drivers/pci/controller/vmd.c2
-rw-r--r--drivers/pci/endpoint/pci-epc-core.c2
-rw-r--r--drivers/pci/endpoint/pci-epf-core.c4
-rw-r--r--drivers/pci/hotplug/acpiphp_glue.c2
-rw-r--r--drivers/pci/hotplug/cpqphp.h2
-rw-r--r--drivers/pci/hotplug/cpqphp_ctrl.c4
-rw-r--r--drivers/pci/hotplug/cpqphp_pci.c6
-rw-r--r--drivers/pci/hotplug/ibmphp.h4
-rw-r--r--drivers/pci/hotplug/shpchp_hpc.c2
-rw-r--r--drivers/pci/msi.c3
-rw-r--r--drivers/pci/pci-driver.c2
-rw-r--r--drivers/pci/pci.c9
-rw-r--r--drivers/pci/pcie/aer.c2
-rw-r--r--drivers/pci/probe.c7
-rw-r--r--drivers/pci/quirks.c14
-rw-r--r--drivers/pci/rom.c2
-rw-r--r--drivers/pci/setup-bus.c2
-rw-r--r--drivers/pci/setup-irq.c26
23 files changed, 57 insertions, 52 deletions
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index eaec915ffe62..8459f857ad9e 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -3126,14 +3126,14 @@ static int hv_pci_probe(struct hv_device *hdev,
if (dom == HVPCI_DOM_INVALID) {
dev_err(&hdev->device,
- "Unable to use dom# 0x%hx or other numbers", dom_req);
+ "Unable to use dom# 0x%x or other numbers", dom_req);
ret = -EINVAL;
goto free_bus;
}
if (dom != dom_req)
dev_info(&hdev->device,
- "PCI dom# 0x%hx has collision, using 0x%hx",
+ "PCI dom# 0x%x has collision, using 0x%x",
dom_req, dom);
hbus->bridge->domain_nr = dom;
diff --git a/drivers/pci/controller/pci-thunder-ecam.c b/drivers/pci/controller/pci-thunder-ecam.c
index ffd84656544f..e9d5ca245f5e 100644
--- a/drivers/pci/controller/pci-thunder-ecam.c
+++ b/drivers/pci/controller/pci-thunder-ecam.c
@@ -17,7 +17,7 @@ static void set_val(u32 v, int where, int size, u32 *val)
{
int shift = (where & 3) * 8;
- pr_debug("set_val %04x: %08x\n", (unsigned)(where & ~3), v);
+ pr_debug("set_val %04x: %08x\n", (unsigned int)(where & ~3), v);
v >>= shift;
if (size == 1)
v &= 0xff;
@@ -187,7 +187,7 @@ static int thunder_ecam_config_read(struct pci_bus *bus, unsigned int devfn,
pr_debug("%04x:%04x - Fix pass#: %08x, where: %03x, devfn: %03x\n",
vendor_device & 0xffff, vendor_device >> 16, class_rev,
- (unsigned) where, devfn);
+ (unsigned int)where, devfn);
/* Check for non type-00 header */
if (cfg_type == 0) {
diff --git a/drivers/pci/controller/pci-xgene-msi.c b/drivers/pci/controller/pci-xgene-msi.c
index b7a8e062fcc5..c50ff279903c 100644
--- a/drivers/pci/controller/pci-xgene-msi.c
+++ b/drivers/pci/controller/pci-xgene-msi.c
@@ -302,7 +302,7 @@ static void xgene_msi_isr(struct irq_desc *desc)
/*
* MSIINTn (n is 0..F) indicates if there is a pending MSI interrupt
- * If bit x of this register is set (x is 0..7), one or more interupts
+ * If bit x of this register is set (x is 0..7), one or more interrupts
* corresponding to MSInIRx is set.
*/
grp_select = xgene_msi_int_read(xgene_msi, msi_grp);
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index cc30215f5a43..1fc7bd49a7ad 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -145,7 +145,7 @@
#define BRCM_INT_PCI_MSI_LEGACY_NR 8
#define BRCM_INT_PCI_MSI_SHIFT 0
-/* MSI target adresses */
+/* MSI target addresses */
#define BRCM_MSI_TARGET_ADDR_LT_4GB 0x0fffffffcULL
#define BRCM_MSI_TARGET_ADDR_GT_4GB 0xffffffffcULL
diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
index 30ac5fbefbbf..36b9d2c46cfa 100644
--- a/drivers/pci/controller/pcie-iproc.c
+++ b/drivers/pci/controller/pcie-iproc.c
@@ -249,7 +249,7 @@ enum iproc_pcie_reg {
/*
* To hold the address of the register where the MSI writes are
- * programed. When ARM GICv3 ITS is used, this should be programmed
+ * programmed. When ARM GICv3 ITS is used, this should be programmed
* with the address of the GITS_TRANSLATER register.
*/
IPROC_PCIE_MSI_ADDR_LO,
diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
index a5987e52700e..1ed2667069ab 100644
--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -18,8 +18,6 @@
#include <linux/rcupdate.h>
#include <asm/irqdomain.h>
-#include <asm/device.h>
-#include <asm/msi.h>
#define VMD_CFGBAR 0
#define VMD_MEMBAR1 2
diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c
index ecbb0fb3b653..38621558d397 100644
--- a/drivers/pci/endpoint/pci-epc-core.c
+++ b/drivers/pci/endpoint/pci-epc-core.c
@@ -700,7 +700,7 @@ EXPORT_SYMBOL_GPL(pci_epc_linkup);
/**
* pci_epc_init_notify() - Notify the EPF device that EPC device's core
* initialization is completed.
- * @epc: the EPC device whose core initialization is completeds
+ * @epc: the EPC device whose core initialization is completed
*
* Invoke to Notify the EPF device that the EPC device's initialization
* is completed.
diff --git a/drivers/pci/endpoint/pci-epf-core.c b/drivers/pci/endpoint/pci-epf-core.c
index 8aea16380870..9ed556936f48 100644
--- a/drivers/pci/endpoint/pci-epf-core.c
+++ b/drivers/pci/endpoint/pci-epf-core.c
@@ -224,7 +224,7 @@ EXPORT_SYMBOL_GPL(pci_epf_add_vepf);
* be removed
* @epf_vf: the virtual EP function to be removed
*
- * Invoke to remove a virtual endpoint function from the physcial endpoint
+ * Invoke to remove a virtual endpoint function from the physical endpoint
* function.
*/
void pci_epf_remove_vepf(struct pci_epf *epf_pf, struct pci_epf *epf_vf)
@@ -432,7 +432,7 @@ EXPORT_SYMBOL_GPL(pci_epf_destroy);
/**
* pci_epf_create() - create a new PCI EPF device
* @name: the name of the PCI EPF device. This name will be used to bind the
- * the EPF device to a EPF driver
+ * EPF device to a EPF driver
*
* Invoke to create a new PCI EPF device by providing the name of the function
* device.
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index f031302ad401..12f4b351be67 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -22,7 +22,7 @@
* when the bridge is scanned and it loses a refcount when the bridge
* is removed.
* - When a P2P bridge is present, we elevate the refcount on the subordinate
- * bus. It loses the refcount when the the driver unloads.
+ * bus. It loses the refcount when the driver unloads.
*/
#define pr_fmt(fmt) "acpiphp_glue: " fmt
diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h
index 77e4e0142fbc..2f7b49ea96e2 100644
--- a/drivers/pci/hotplug/cpqphp.h
+++ b/drivers/pci/hotplug/cpqphp.h
@@ -15,7 +15,7 @@
#define _CPQPHP_H
#include <linux/interrupt.h>
-#include <asm/io.h> /* for read? and write? functions */
+#include <linux/io.h> /* for read? and write? functions */
#include <linux/delay.h> /* for delays */
#include <linux/mutex.h>
#include <linux/sched/signal.h> /* for signal_pending() */
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index 1b26ca0b3701..ed7b58eb64d2 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -519,7 +519,7 @@ error:
* @head: list to search
* @size: size of node to find, must be a power of two.
*
- * Description: This function sorts the resource list by size and then returns
+ * Description: This function sorts the resource list by size and then
* returns the first node of "size" length that is not in the ISA aliasing
* window. If it finds a node larger than "size" it will split it up.
*/
@@ -1202,7 +1202,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
mdelay(5);
- /* Reenable interrupts */
+ /* Re-enable interrupts */
writel(0, ctrl->hpc_reg + INT_MASK);
pci_write_config_byte(ctrl->pci_dev, 0x41, reg);
diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c
index 1b2b3f3b648b..9038039ad6db 100644
--- a/drivers/pci/hotplug/cpqphp_pci.c
+++ b/drivers/pci/hotplug/cpqphp_pci.c
@@ -189,8 +189,10 @@ int cpqhp_set_irq(u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num)
/* This should only be for x86 as it sets the Edge Level
* Control Register
*/
- outb((u8) (temp_word & 0xFF), 0x4d0); outb((u8) ((temp_word &
- 0xFF00) >> 8), 0x4d1); rc = 0; }
+ outb((u8)(temp_word & 0xFF), 0x4d0);
+ outb((u8)((temp_word & 0xFF00) >> 8), 0x4d1);
+ rc = 0;
+ }
return rc;
}
diff --git a/drivers/pci/hotplug/ibmphp.h b/drivers/pci/hotplug/ibmphp.h
index e90a4ebf6550..0399c60d2ec1 100644
--- a/drivers/pci/hotplug/ibmphp.h
+++ b/drivers/pci/hotplug/ibmphp.h
@@ -352,7 +352,7 @@ struct resource_node {
u32 len;
int type; /* MEM, IO, PFMEM */
u8 fromMem; /* this is to indicate that the range is from
- * from the Memory bucket rather than from PFMem */
+ * the Memory bucket rather than from PFMem */
struct resource_node *next;
struct resource_node *nextRange; /* for the other mem range on bus */
};
@@ -736,7 +736,7 @@ struct controller {
int ibmphp_init_devno(struct slot **); /* This function is called from EBDA, so we need it not be static */
int ibmphp_do_disable_slot(struct slot *slot_cur);
-int ibmphp_update_slot_info(struct slot *); /* This function is called from HPC, so we need it to not be be static */
+int ibmphp_update_slot_info(struct slot *); /* This function is called from HPC, so we need it to not be static */
int ibmphp_configure_card(struct pci_func *, u8);
int ibmphp_unconfigure_card(struct slot **, int);
extern const struct hotplug_slot_ops ibmphp_hotplug_slot_ops;
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 9e3b27744305..bd7557ca4910 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -295,7 +295,7 @@ static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
mutex_lock(&slot->ctrl->cmd_lock);
if (!shpc_poll_ctrl_busy(ctrl)) {
- /* After 1 sec and and the controller is still busy */
+ /* After 1 sec and the controller is still busy */
ctrl_err(ctrl, "Controller is still busy after 1 sec\n");
retval = -EBUSY;
goto out;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 0099a00af361..bdc6ba7f39f0 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -579,7 +579,8 @@ err:
return ret;
}
-static void __iomem *msix_map_region(struct pci_dev *dev, unsigned nr_entries)
+static void __iomem *msix_map_region(struct pci_dev *dev,
+ unsigned int nr_entries)
{
resource_size_t phys_addr;
u32 table_offset;
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 7fddd1eb480c..1d98c974381c 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -570,7 +570,7 @@ static int pci_pm_reenable_device(struct pci_dev *pci_dev)
{
int retval;
- /* if the device was enabled before suspend, reenable */
+ /* if the device was enabled before suspend, re-enable */
retval = pci_reenable_device(pci_dev);
/*
* if the device was busmaster before the suspend, make it busmaster
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 96fb803831c4..b88db815ee01 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -269,7 +269,7 @@ static int pci_dev_str_match_path(struct pci_dev *dev, const char *path,
const char **endptr)
{
int ret;
- int seg, bus, slot, func;
+ unsigned int seg, bus, slot, func;
char *wpath, *p;
char end;
@@ -5324,7 +5324,7 @@ const struct attribute_group pci_dev_reset_method_attr_group = {
*/
int __pci_reset_function_locked(struct pci_dev *dev)
{
- int i, m, rc = -ENOTTY;
+ int i, m, rc;
might_sleep();
@@ -6360,11 +6360,12 @@ EXPORT_SYMBOL_GPL(pci_pr3_present);
* cannot be left as a userspace activity). DMA aliases should therefore
* be configured via quirks, such as the PCI fixup header quirk.
*/
-void pci_add_dma_alias(struct pci_dev *dev, u8 devfn_from, unsigned nr_devfns)
+void pci_add_dma_alias(struct pci_dev *dev, u8 devfn_from,
+ unsigned int nr_devfns)
{
int devfn_to;
- nr_devfns = min(nr_devfns, (unsigned) MAX_NR_DEVFNS - devfn_from);
+ nr_devfns = min(nr_devfns, (unsigned int)MAX_NR_DEVFNS - devfn_from);
devfn_to = devfn_from + nr_devfns - 1;
if (!dev->dma_alias_mask)
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 9784fdcf3006..9fa1f97e5b27 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -57,7 +57,7 @@ struct aer_stats {
* "as seen by this device". Note that this may mean that if an
* end point is causing problems, the AER counters may increment
* at its link partner (e.g. root port) because the errors will be
- * "seen" by the link partner and not the the problematic end point
+ * "seen" by the link partner and not the problematic end point
* itself (which may report all counters as 0 as it never saw any
* problems).
*/
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 78ca4cbebbb7..087d3658f75c 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -2585,11 +2585,12 @@ struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn)
}
EXPORT_SYMBOL(pci_scan_single_device);
-static unsigned next_fn(struct pci_bus *bus, struct pci_dev *dev, unsigned fn)
+static unsigned int next_fn(struct pci_bus *bus, struct pci_dev *dev,
+ unsigned int fn)
{
int pos;
u16 cap = 0;
- unsigned next_fn;
+ unsigned int next_fn;
if (pci_ari_enabled(bus)) {
if (!dev)
@@ -2648,7 +2649,7 @@ static int only_one_child(struct pci_bus *bus)
*/
int pci_scan_slot(struct pci_bus *bus, int devfn)
{
- unsigned fn, nr = 0;
+ unsigned int fn, nr = 0;
struct pci_dev *dev;
if (only_one_child(bus) && (devfn > 0))
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 126c256bbb8a..aedb78c86ddc 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -501,7 +501,7 @@ static void quirk_s3_64M(struct pci_dev *dev)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M);
-static void quirk_io(struct pci_dev *dev, int pos, unsigned size,
+static void quirk_io(struct pci_dev *dev, int pos, unsigned int size,
const char *name)
{
u32 region;
@@ -552,7 +552,7 @@ static void quirk_cs5536_vsa(struct pci_dev *dev)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa);
static void quirk_io_region(struct pci_dev *dev, int port,
- unsigned size, int nr, const char *name)
+ unsigned int size, int nr, const char *name)
{
u16 region;
struct pci_bus_region bus_region;
@@ -666,7 +666,7 @@ static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int p
base = devres & 0xffff;
size = 16;
for (;;) {
- unsigned bit = size >> 1;
+ unsigned int bit = size >> 1;
if ((bit & mask) == bit)
break;
size = bit;
@@ -692,7 +692,7 @@ static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int
mask = (devres & 0x3f) << 16;
size = 128 << 16;
for (;;) {
- unsigned bit = size >> 1;
+ unsigned int bit = size >> 1;
if ((bit & mask) == bit)
break;
size = bit;
@@ -806,7 +806,7 @@ static void ich6_lpc_acpi_gpio(struct pci_dev *dev)
"ICH6 GPIO");
}
-static void ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg,
+static void ich6_lpc_generic_decode(struct pci_dev *dev, unsigned int reg,
const char *name, int dynsize)
{
u32 val;
@@ -850,7 +850,7 @@ static void quirk_ich6_lpc(struct pci_dev *dev)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc);
-static void ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg,
+static void ich7_lpc_generic_decode(struct pci_dev *dev, unsigned int reg,
const char *name)
{
u32 val;
@@ -2700,7 +2700,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA,
* then the device can't use INTx interrupts. Tegra's PCIe root ports don't
* generate MSI interrupts for PME and AER events instead only INTx interrupts
* are generated. Though Tegra's PCIe root ports can generate MSI interrupts
- * for other events, since PCIe specificiation doesn't support using a mix of
+ * for other events, since PCIe specification doesn't support using a mix of
* INTx and MSI/MSI-X, it is required to disable MSI interrupts to avoid port
* service drivers registering their respective ISRs for MSIs.
*/
diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c
index 8fc9a4e911e3..e18d3a4383ba 100644
--- a/drivers/pci/rom.c
+++ b/drivers/pci/rom.c
@@ -85,7 +85,7 @@ static size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom,
{
void __iomem *image;
int last_image;
- unsigned length;
+ unsigned int length;
image = rom;
do {
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 2ce636937c6e..547396ec50b5 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -1525,7 +1525,7 @@ static void pci_bridge_release_resources(struct pci_bus *bus,
{
struct pci_dev *dev = bus->self;
struct resource *r;
- unsigned old_flags = 0;
+ unsigned int old_flags = 0;
struct resource *b_res;
int idx = 1;
diff --git a/drivers/pci/setup-irq.c b/drivers/pci/setup-irq.c
index 7129494754dd..cc7d26b015f3 100644
--- a/drivers/pci/setup-irq.c
+++ b/drivers/pci/setup-irq.c
@@ -8,7 +8,6 @@
* David Miller (davem@redhat.com)
*/
-
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/errno.h>
@@ -28,25 +27,26 @@ void pci_assign_irq(struct pci_dev *dev)
return;
}
- /* If this device is not on the primary bus, we need to figure out
- which interrupt pin it will come in on. We know which slot it
- will come in on 'cos that slot is where the bridge is. Each
- time the interrupt line passes through a PCI-PCI bridge we must
- apply the swizzle function. */
-
+ /*
+ * If this device is not on the primary bus, we need to figure out
+ * which interrupt pin it will come in on. We know which slot it
+ * will come in on because that slot is where the bridge is. Each
+ * time the interrupt line passes through a PCI-PCI bridge we must
+ * apply the swizzle function.
+ */
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
/* Cope with illegal. */
if (pin > 4)
pin = 1;
if (pin) {
- /* Follow the chain of bridges, swizzling as we go. */
+ /* Follow the chain of bridges, swizzling as we go. */
if (hbrg->swizzle_irq)
slot = (*(hbrg->swizzle_irq))(dev, &pin);
/*
- * If a swizzling function is not used map_irq must
- * ignore slot
+ * If a swizzling function is not used, map_irq() must
+ * ignore slot.
*/
irq = (*(hbrg->map_irq))(dev, slot, pin);
if (irq == -1)
@@ -56,7 +56,9 @@ void pci_assign_irq(struct pci_dev *dev)
pci_dbg(dev, "assign IRQ: got %d\n", dev->irq);
- /* Always tell the device, so the driver knows what is
- the real IRQ to use; the device does not use it. */
+ /*
+ * Always tell the device, so the driver knows what is the real IRQ
+ * to use; the device does not use it.
+ */
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 05:28:00 +0000