aboutsummaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/media/hevc-ctrls.h6
-rw-r--r--include/media/i2c/m5mols.h4
-rw-r--r--include/media/i2c/noon010pc30.h4
-rw-r--r--include/media/media-entity.h25
-rw-r--r--include/media/mipi-csi2.h45
-rw-r--r--include/media/rc-core.h12
-rw-r--r--include/media/v4l2-fwnode.h61
-rw-r--r--include/media/v4l2-mediabus.h104
-rw-r--r--include/media/v4l2-subdev.h13
-rw-r--r--include/soc/mediatek/smi.h20
-rw-r--r--include/uapi/linux/lirc.h16
-rw-r--r--include/uapi/linux/v4l2-controls.h8
-rw-r--r--include/uapi/linux/videodev2.h2
13 files changed, 165 insertions, 155 deletions
diff --git a/include/media/hevc-ctrls.h b/include/media/hevc-ctrls.h
index ef63bc205756..01ccda48d8c5 100644
--- a/include/media/hevc-ctrls.h
+++ b/include/media/hevc-ctrls.h
@@ -127,15 +127,13 @@ struct v4l2_ctrl_hevc_pps {
__u64 flags;
};
-#define V4L2_HEVC_DPB_ENTRY_RPS_ST_CURR_BEFORE 0x01
-#define V4L2_HEVC_DPB_ENTRY_RPS_ST_CURR_AFTER 0x02
-#define V4L2_HEVC_DPB_ENTRY_RPS_LT_CURR 0x03
+#define V4L2_HEVC_DPB_ENTRY_LONG_TERM_REFERENCE 0x01
#define V4L2_HEVC_DPB_ENTRIES_NUM_MAX 16
struct v4l2_hevc_dpb_entry {
__u64 timestamp;
- __u8 rps;
+ __u8 flags;
__u8 field_pic;
__u16 pic_order_cnt[2];
__u8 padding[2];
diff --git a/include/media/i2c/m5mols.h b/include/media/i2c/m5mols.h
index 9cec5a09e125..a56ae353c891 100644
--- a/include/media/i2c/m5mols.h
+++ b/include/media/i2c/m5mols.h
@@ -14,15 +14,11 @@
/**
* struct m5mols_platform_data - platform data for M-5MOLS driver
- * @gpio_reset: GPIO driving the reset pin of M-5MOLS
- * @reset_polarity: active state for gpio_reset pin, 0 or 1
* @set_power: an additional callback to the board setup code
* to be called after enabling and before disabling
* the sensor's supply regulators
*/
struct m5mols_platform_data {
- int gpio_reset;
- u8 reset_polarity;
int (*set_power)(struct device *dev, int on);
};
diff --git a/include/media/i2c/noon010pc30.h b/include/media/i2c/noon010pc30.h
index d1b2e06a1de0..1880dad25cf0 100644
--- a/include/media/i2c/noon010pc30.h
+++ b/include/media/i2c/noon010pc30.h
@@ -12,14 +12,10 @@
/**
* struct noon010pc30_platform_data - platform data
* @clk_rate: the clock frequency in Hz
- * @gpio_nreset: GPIO driving nRESET pin
- * @gpio_nstby: GPIO driving nSTBY pin
*/
struct noon010pc30_platform_data {
unsigned long clk_rate;
- int gpio_nreset;
- int gpio_nstby;
};
#endif /* NOON010PC30_H */
diff --git a/include/media/media-entity.h b/include/media/media-entity.h
index fea489f03d57..742918962d46 100644
--- a/include/media/media-entity.h
+++ b/include/media/media-entity.h
@@ -268,7 +268,6 @@ enum media_entity_type {
* @pads: Pads array with the size defined by @num_pads.
* @links: List of data links.
* @ops: Entity operations.
- * @stream_count: Stream count for the entity.
* @use_count: Use count for the entity.
* @pipe: Pipeline this entity belongs to.
* @info: Union with devnode information. Kept just for backward
@@ -283,10 +282,9 @@ enum media_entity_type {
*
* .. note::
*
- * @stream_count and @use_count reference counts must never be
- * negative, but are signed integers on purpose: a simple ``WARN_ON(<0)``
- * check can be used to detect reference count bugs that would make them
- * negative.
+ * The @use_count reference count must never be negative, but is a signed
+ * integer on purpose: a simple ``WARN_ON(<0)`` check can be used to detect
+ * reference count bugs that would make it negative.
*/
struct media_entity {
struct media_gobj graph_obj; /* must be first field in struct */
@@ -305,7 +303,6 @@ struct media_entity {
const struct media_entity_operations *ops;
- int stream_count;
int use_count;
struct media_pipeline *pipe;
@@ -657,6 +654,10 @@ int media_entity_pads_init(struct media_entity *entity, u16 num_pads,
*
* This function must be called during the cleanup phase after unregistering
* the entity (currently, it does nothing).
+ *
+ * Calling media_entity_cleanup() on a media_entity whose memory has been
+ * zeroed but that has not been initialized with media_entity_pad_init() is
+ * valid and is a no-op.
*/
#if IS_ENABLED(CONFIG_MEDIA_CONTROLLER)
static inline void media_entity_cleanup(struct media_entity *entity) {}
@@ -859,6 +860,18 @@ struct media_link *media_entity_find_link(struct media_pad *source,
struct media_pad *media_entity_remote_pad(const struct media_pad *pad);
/**
+ * media_entity_is_streaming - Test if an entity is part of a streaming pipeline
+ * @entity: The entity
+ *
+ * Return: True if the entity is part of a pipeline started with the
+ * media_pipeline_start() function, false otherwise.
+ */
+static inline bool media_entity_is_streaming(const struct media_entity *entity)
+{
+ return entity->pipe;
+}
+
+/**
* media_entity_get_fwnode_pad - Get pad number from fwnode
*
* @entity: The entity
diff --git a/include/media/mipi-csi2.h b/include/media/mipi-csi2.h
new file mode 100644
index 000000000000..392794e5badd
--- /dev/null
+++ b/include/media/mipi-csi2.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * MIPI CSI-2 Data Types
+ *
+ * Copyright (C) 2022 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ */
+
+#ifndef _MEDIA_MIPI_CSI2_H
+#define _MEDIA_MIPI_CSI2_H
+
+/* Short packet data types */
+#define MIPI_CSI2_DT_FS 0x00
+#define MIPI_CSI2_DT_FE 0x01
+#define MIPI_CSI2_DT_LS 0x02
+#define MIPI_CSI2_DT_LE 0x03
+#define MIPI_CSI2_DT_GENERIC_SHORT(n) (0x08 + (n)) /* 0..7 */
+
+/* Long packet data types */
+#define MIPI_CSI2_DT_NULL 0x10
+#define MIPI_CSI2_DT_BLANKING 0x11
+#define MIPI_CSI2_DT_EMBEDDED_8B 0x12
+#define MIPI_CSI2_DT_YUV420_8B 0x18
+#define MIPI_CSI2_DT_YUV420_10B 0x19
+#define MIPI_CSI2_DT_YUV420_8B_LEGACY 0x1a
+#define MIPI_CSI2_DT_YUV420_8B_CS 0x1c
+#define MIPI_CSI2_DT_YUV420_10B_CS 0x1d
+#define MIPI_CSI2_DT_YUV422_8B 0x1e
+#define MIPI_CSI2_DT_YUV422_10B 0x1f
+#define MIPI_CSI2_DT_RGB444 0x20
+#define MIPI_CSI2_DT_RGB555 0x21
+#define MIPI_CSI2_DT_RGB565 0x22
+#define MIPI_CSI2_DT_RGB666 0x23
+#define MIPI_CSI2_DT_RGB888 0x24
+#define MIPI_CSI2_DT_RAW24 0x27
+#define MIPI_CSI2_DT_RAW6 0x28
+#define MIPI_CSI2_DT_RAW7 0x29
+#define MIPI_CSI2_DT_RAW8 0x2a
+#define MIPI_CSI2_DT_RAW10 0x2b
+#define MIPI_CSI2_DT_RAW12 0x2c
+#define MIPI_CSI2_DT_RAW14 0x2d
+#define MIPI_CSI2_DT_RAW16 0x2e
+#define MIPI_CSI2_DT_RAW20 0x2f
+#define MIPI_CSI2_DT_USER_DEFINED(n) (0x30 + (n)) /* 0..7 */
+
+#endif /* _MEDIA_MIPI_CSI2_H */
diff --git a/include/media/rc-core.h b/include/media/rc-core.h
index ab9d3b7cd799..803349599c27 100644
--- a/include/media/rc-core.h
+++ b/include/media/rc-core.h
@@ -130,9 +130,7 @@ struct lirc_fh {
* @tx_resolution: resolution (in us) of output sampler
* @lirc_dev: lirc device
* @lirc_cdev: lirc char cdev
- * @gap_start: time when gap starts
- * @gap_duration: duration of initial gap
- * @gap: true if we're in a gap
+ * @gap_start: start time for gap after timeout if non-zero
* @lirc_fh_lock: protects lirc_fh list
* @lirc_fh: list of open files
* @registered: set to true by rc_register_device(), false by
@@ -201,8 +199,6 @@ struct rc_dev {
struct device lirc_dev;
struct cdev lirc_cdev;
ktime_t gap_start;
- u64 gap_duration;
- bool gap;
spinlock_t lirc_fh_lock;
struct list_head lirc_fh;
#endif
@@ -302,7 +298,7 @@ struct ir_raw_event {
u8 duty_cycle;
unsigned pulse:1;
- unsigned reset:1;
+ unsigned overflow:1;
unsigned timeout:1;
unsigned carrier_report:1;
};
@@ -325,9 +321,9 @@ int ir_raw_encode_scancode(enum rc_proto protocol, u32 scancode,
struct ir_raw_event *events, unsigned int max);
int ir_raw_encode_carrier(enum rc_proto protocol);
-static inline void ir_raw_event_reset(struct rc_dev *dev)
+static inline void ir_raw_event_overflow(struct rc_dev *dev)
{
- ir_raw_event_store(dev, &((struct ir_raw_event) { .reset = true }));
+ ir_raw_event_store(dev, &((struct ir_raw_event) { .overflow = true }));
dev->idle = true;
ir_raw_event_handle(dev);
}
diff --git a/include/media/v4l2-fwnode.h b/include/media/v4l2-fwnode.h
index 9c97f1dbd1c6..feb132df45a3 100644
--- a/include/media/v4l2-fwnode.h
+++ b/include/media/v4l2-fwnode.h
@@ -25,68 +25,19 @@ struct fwnode_handle;
struct v4l2_async_notifier;
struct v4l2_async_subdev;
-#define V4L2_FWNODE_CSI2_MAX_DATA_LANES 8
-
-/**
- * struct v4l2_fwnode_bus_mipi_csi2 - MIPI CSI-2 bus data structure
- * @flags: media bus (V4L2_MBUS_*) flags
- * @data_lanes: an array of physical data lane indexes
- * @clock_lane: physical lane index of the clock lane
- * @num_data_lanes: number of data lanes
- * @lane_polarities: polarity of the lanes. The order is the same of
- * the physical lanes.
- */
-struct v4l2_fwnode_bus_mipi_csi2 {
- unsigned int flags;
- unsigned char data_lanes[V4L2_FWNODE_CSI2_MAX_DATA_LANES];
- unsigned char clock_lane;
- unsigned char num_data_lanes;
- bool lane_polarities[1 + V4L2_FWNODE_CSI2_MAX_DATA_LANES];
-};
-
-/**
- * struct v4l2_fwnode_bus_parallel - parallel data bus data structure
- * @flags: media bus (V4L2_MBUS_*) flags
- * @bus_width: bus width in bits
- * @data_shift: data shift in bits
- */
-struct v4l2_fwnode_bus_parallel {
- unsigned int flags;
- unsigned char bus_width;
- unsigned char data_shift;
-};
-
-/**
- * struct v4l2_fwnode_bus_mipi_csi1 - CSI-1/CCP2 data bus structure
- * @clock_inv: polarity of clock/strobe signal
- * false - not inverted, true - inverted
- * @strobe: false - data/clock, true - data/strobe
- * @lane_polarity: the polarities of the clock (index 0) and data lanes
- * index (1)
- * @data_lane: the number of the data lane
- * @clock_lane: the number of the clock lane
- */
-struct v4l2_fwnode_bus_mipi_csi1 {
- unsigned char clock_inv:1;
- unsigned char strobe:1;
- bool lane_polarity[2];
- unsigned char data_lane;
- unsigned char clock_lane;
-};
-
/**
* struct v4l2_fwnode_endpoint - the endpoint data structure
* @base: fwnode endpoint of the v4l2_fwnode
* @bus_type: bus type
* @bus: bus configuration data structure
- * @bus.parallel: embedded &struct v4l2_fwnode_bus_parallel.
+ * @bus.parallel: embedded &struct v4l2_mbus_config_parallel.
* Used if the bus is parallel.
- * @bus.mipi_csi1: embedded &struct v4l2_fwnode_bus_mipi_csi1.
+ * @bus.mipi_csi1: embedded &struct v4l2_mbus_config_mipi_csi1.
* Used if the bus is MIPI Alliance's Camera Serial
* Interface version 1 (MIPI CSI1) or Standard
* Mobile Imaging Architecture's Compact Camera Port 2
* (SMIA CCP2).
- * @bus.mipi_csi2: embedded &struct v4l2_fwnode_bus_mipi_csi2.
+ * @bus.mipi_csi2: embedded &struct v4l2_mbus_config_mipi_csi2.
* Used if the bus is MIPI Alliance's Camera Serial
* Interface version 2 (MIPI CSI2).
* @link_frequencies: array of supported link frequencies
@@ -100,9 +51,9 @@ struct v4l2_fwnode_endpoint {
*/
enum v4l2_mbus_type bus_type;
struct {
- struct v4l2_fwnode_bus_parallel parallel;
- struct v4l2_fwnode_bus_mipi_csi1 mipi_csi1;
- struct v4l2_fwnode_bus_mipi_csi2 mipi_csi2;
+ struct v4l2_mbus_config_parallel parallel;
+ struct v4l2_mbus_config_mipi_csi1 mipi_csi1;
+ struct v4l2_mbus_config_mipi_csi2 mipi_csi2;
} bus;
u64 *link_frequencies;
unsigned int nr_of_link_frequencies;
diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
index 841e190aedd9..e0db3bcff9ed 100644
--- a/include/media/v4l2-mediabus.h
+++ b/include/media/v4l2-mediabus.h
@@ -15,15 +15,12 @@
* How to use the V4L2_MBUS_* flags:
* Flags are defined for each of the possible states and values of a media
* bus configuration parameter. One and only one bit of each group of flags
- * shall be set by the users of the v4l2_subdev_pad_ops.get_mbus_config and
- * v4l2_subdev_pad_ops.set_mbus_config operations to ensure that no
- * conflicting settings are specified when reporting and setting the media bus
- * configuration with the two operations respectively. For example, it is
- * invalid to set or clear both the V4L2_MBUS_HSYNC_ACTIVE_HIGH and the
+ * shall be set by the users of the v4l2_subdev_pad_ops.get_mbus_config
+ * operation to ensure that no conflicting settings are specified when
+ * reporting the media bus configuration. For example, it is invalid to set or
+ * clear both the V4L2_MBUS_HSYNC_ACTIVE_HIGH and the
* V4L2_MBUS_HSYNC_ACTIVE_LOW flag at the same time. Instead either flag
- * V4L2_MBUS_HSYNC_ACTIVE_HIGH or flag V4L2_MBUS_HSYNC_ACTIVE_LOW shall be
- * set. The same is true for the V4L2_MBUS_CSI2_1/2/3/4_LANE flags group: only
- * one of these four bits shall be set.
+ * V4L2_MBUS_HSYNC_ACTIVE_HIGH or flag V4L2_MBUS_HSYNC_ACTIVE_LOW shall be set.
*
* TODO: replace the existing V4L2_MBUS_* flags with structures of fields
* to avoid conflicting settings.
@@ -70,28 +67,57 @@
#define V4L2_MBUS_DATA_ENABLE_LOW BIT(15)
/* Serial flags */
-/* CSI-2 D-PHY number of data lanes. */
-#define V4L2_MBUS_CSI2_1_LANE BIT(0)
-#define V4L2_MBUS_CSI2_2_LANE BIT(1)
-#define V4L2_MBUS_CSI2_3_LANE BIT(2)
-#define V4L2_MBUS_CSI2_4_LANE BIT(3)
-/* CSI-2 Virtual Channel identifiers. */
-#define V4L2_MBUS_CSI2_CHANNEL_0 BIT(4)
-#define V4L2_MBUS_CSI2_CHANNEL_1 BIT(5)
-#define V4L2_MBUS_CSI2_CHANNEL_2 BIT(6)
-#define V4L2_MBUS_CSI2_CHANNEL_3 BIT(7)
/* Clock non-continuous mode support. */
-#define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK BIT(8)
-#define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK BIT(9)
-
-#define V4L2_MBUS_CSI2_LANES (V4L2_MBUS_CSI2_1_LANE | \
- V4L2_MBUS_CSI2_2_LANE | \
- V4L2_MBUS_CSI2_3_LANE | \
- V4L2_MBUS_CSI2_4_LANE)
-#define V4L2_MBUS_CSI2_CHANNELS (V4L2_MBUS_CSI2_CHANNEL_0 | \
- V4L2_MBUS_CSI2_CHANNEL_1 | \
- V4L2_MBUS_CSI2_CHANNEL_2 | \
- V4L2_MBUS_CSI2_CHANNEL_3)
+#define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK BIT(0)
+
+#define V4L2_MBUS_CSI2_MAX_DATA_LANES 8
+
+/**
+ * struct v4l2_mbus_config_mipi_csi2 - MIPI CSI-2 data bus configuration
+ * @flags: media bus (V4L2_MBUS_*) flags
+ * @data_lanes: an array of physical data lane indexes
+ * @clock_lane: physical lane index of the clock lane
+ * @num_data_lanes: number of data lanes
+ * @lane_polarities: polarity of the lanes. The order is the same of
+ * the physical lanes.
+ */
+struct v4l2_mbus_config_mipi_csi2 {
+ unsigned int flags;
+ unsigned char data_lanes[V4L2_MBUS_CSI2_MAX_DATA_LANES];
+ unsigned char clock_lane;
+ unsigned char num_data_lanes;
+ bool lane_polarities[1 + V4L2_MBUS_CSI2_MAX_DATA_LANES];
+};
+
+/**
+ * struct v4l2_mbus_config_parallel - parallel data bus configuration
+ * @flags: media bus (V4L2_MBUS_*) flags
+ * @bus_width: bus width in bits
+ * @data_shift: data shift in bits
+ */
+struct v4l2_mbus_config_parallel {
+ unsigned int flags;
+ unsigned char bus_width;
+ unsigned char data_shift;
+};
+
+/**
+ * struct v4l2_mbus_config_mipi_csi1 - CSI-1/CCP2 data bus configuration
+ * @clock_inv: polarity of clock/strobe signal
+ * false - not inverted, true - inverted
+ * @strobe: false - data/clock, true - data/strobe
+ * @lane_polarity: the polarities of the clock (index 0) and data lanes
+ * index (1)
+ * @data_lane: the number of the data lane
+ * @clock_lane: the number of the clock lane
+ */
+struct v4l2_mbus_config_mipi_csi1 {
+ unsigned char clock_inv:1;
+ unsigned char strobe:1;
+ bool lane_polarity[2];
+ unsigned char data_lane;
+ unsigned char clock_lane;
+};
/**
* enum v4l2_mbus_type - media bus type
@@ -118,12 +144,26 @@ enum v4l2_mbus_type {
/**
* struct v4l2_mbus_config - media bus configuration
- * @type: in: interface type
- * @flags: in / out: configuration flags, depending on @type
+ * @type: interface type
+ * @bus: bus configuration data structure
+ * @bus.parallel: embedded &struct v4l2_mbus_config_parallel.
+ * Used if the bus is parallel or BT.656.
+ * @bus.mipi_csi1: embedded &struct v4l2_mbus_config_mipi_csi1.
+ * Used if the bus is MIPI Alliance's Camera Serial
+ * Interface version 1 (MIPI CSI1) or Standard
+ * Mobile Imaging Architecture's Compact Camera Port 2
+ * (SMIA CCP2).
+ * @bus.mipi_csi2: embedded &struct v4l2_mbus_config_mipi_csi2.
+ * Used if the bus is MIPI Alliance's Camera Serial
+ * Interface version 2 (MIPI CSI2).
*/
struct v4l2_mbus_config {
enum v4l2_mbus_type type;
- unsigned int flags;
+ union {
+ struct v4l2_mbus_config_parallel parallel;
+ struct v4l2_mbus_config_mipi_csi1 mipi_csi1;
+ struct v4l2_mbus_config_mipi_csi2 mipi_csi2;
+ } bus;
};
/**
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 95ec18c2f49c..6c153b33bb04 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -715,17 +715,6 @@ struct v4l2_subdev_state {
* this operation as close as possible to stream on time. The
* operation shall fail if the pad index it has been called on
* is not valid or in case of unrecoverable failures.
- *
- * @set_mbus_config: set the media bus configuration of a remote sub-device.
- * This operations is intended to allow, in combination with
- * the get_mbus_config operation, the negotiation of media bus
- * configuration parameters between media sub-devices. The
- * operation shall not fail if the requested configuration is
- * not supported, but the driver shall update the content of
- * the %config argument to reflect what has been actually
- * applied to the hardware. The operation shall fail if the
- * pad index it has been called on is not valid or in case of
- * unrecoverable failures.
*/
struct v4l2_subdev_pad_ops {
int (*init_cfg)(struct v4l2_subdev *sd,
@@ -768,8 +757,6 @@ struct v4l2_subdev_pad_ops {
struct v4l2_mbus_frame_desc *fd);
int (*get_mbus_config)(struct v4l2_subdev *sd, unsigned int pad,
struct v4l2_mbus_config *config);
- int (*set_mbus_config)(struct v4l2_subdev *sd, unsigned int pad,
- struct v4l2_mbus_config *config);
};
/**
diff --git a/include/soc/mediatek/smi.h b/include/soc/mediatek/smi.h
index 15e3397cec58..11f7d6b59642 100644
--- a/include/soc/mediatek/smi.h
+++ b/include/soc/mediatek/smi.h
@@ -19,26 +19,6 @@ struct mtk_smi_larb_iommu {
unsigned char bank[32];
};
-/*
- * mtk_smi_larb_get: Enable the power domain and clocks for this local arbiter.
- * It also initialize some basic setting(like iommu).
- * mtk_smi_larb_put: Disable the power domain and clocks for this local arbiter.
- * Both should be called in non-atomic context.
- *
- * Returns 0 if successful, negative on failure.
- */
-int mtk_smi_larb_get(struct device *larbdev);
-void mtk_smi_larb_put(struct device *larbdev);
-
-#else
-
-static inline int mtk_smi_larb_get(struct device *larbdev)
-{
- return 0;
-}
-
-static inline void mtk_smi_larb_put(struct device *larbdev) { }
-
#endif
#endif
diff --git a/include/uapi/linux/lirc.h b/include/uapi/linux/lirc.h
index 9919f2062b14..23b0f2c8ba81 100644
--- a/include/uapi/linux/lirc.h
+++ b/include/uapi/linux/lirc.h
@@ -16,14 +16,16 @@
#define LIRC_MODE2_PULSE 0x01000000
#define LIRC_MODE2_FREQUENCY 0x02000000
#define LIRC_MODE2_TIMEOUT 0x03000000
+#define LIRC_MODE2_OVERFLOW 0x04000000
#define LIRC_VALUE_MASK 0x00FFFFFF
#define LIRC_MODE2_MASK 0xFF000000
-#define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE)
-#define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE)
-#define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY)
-#define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT)
+#define LIRC_SPACE(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_SPACE)
+#define LIRC_PULSE(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_PULSE)
+#define LIRC_FREQUENCY(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY)
+#define LIRC_TIMEOUT(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT)
+#define LIRC_OVERFLOW(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_OVERFLOW)
#define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK)
#define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK)
@@ -32,6 +34,7 @@
#define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE)
#define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY)
#define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT)
+#define LIRC_IS_OVERFLOW(val) (LIRC_MODE2(val) == LIRC_MODE2_OVERFLOW)
/* used heavily by lirc userspace */
#define lirc_t int
@@ -70,13 +73,10 @@
#define LIRC_CAN_REC_MASK LIRC_MODE2REC(LIRC_CAN_SEND_MASK)
#define LIRC_CAN_SET_REC_CARRIER (LIRC_CAN_SET_SEND_CARRIER << 16)
-#define LIRC_CAN_SET_REC_DUTY_CYCLE (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16)
-#define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000
#define LIRC_CAN_SET_REC_CARRIER_RANGE 0x80000000
#define LIRC_CAN_GET_REC_RESOLUTION 0x20000000
#define LIRC_CAN_SET_REC_TIMEOUT 0x10000000
-#define LIRC_CAN_SET_REC_FILTER 0x08000000
#define LIRC_CAN_MEASURE_CARRIER 0x02000000
#define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000
@@ -84,8 +84,6 @@
#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK)
#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK)
-#define LIRC_CAN_NOTIFY_DECODE 0x01000000
-
/*** IOCTL commands for lirc driver ***/
#define LIRC_GET_FEATURES _IOR('i', 0x00000000, __u32)
diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
index c8e0f84d204d..bb40129446d4 100644
--- a/include/uapi/linux/v4l2-controls.h
+++ b/include/uapi/linux/v4l2-controls.h
@@ -219,6 +219,12 @@ enum v4l2_colorfx {
*/
#define V4L2_CID_USER_ALLEGRO_BASE (V4L2_CID_USER_BASE + 0x1170)
+/*
+ * The base for the isl7998x driver controls.
+ * We reserve 16 controls for this driver.
+ */
+#define V4L2_CID_USER_ISL7998X_BASE (V4L2_CID_USER_BASE + 0x1180)
+
/* MPEG-class control IDs */
/* The MPEG controls are applicable to all codec controls
* and the 'MPEG' part of the define is historical */
@@ -1563,6 +1569,8 @@ struct v4l2_h264_dpb_entry {
#define V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC 0x01
#define V4L2_H264_DECODE_PARAM_FLAG_FIELD_PIC 0x02
#define V4L2_H264_DECODE_PARAM_FLAG_BOTTOM_FIELD 0x04
+#define V4L2_H264_DECODE_PARAM_FLAG_PFRAME 0x08
+#define V4L2_H264_DECODE_PARAM_FLAG_BFRAME 0x10
#define V4L2_CID_STATELESS_H264_DECODE_PARAMS (V4L2_CID_CODEC_STATELESS_BASE + 7)
/**
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index df8b9c486ba1..3768a0a80830 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -632,6 +632,8 @@ struct v4l2_pix_format {
/* Tiled YUV formats, non contiguous planes */
#define V4L2_PIX_FMT_NV12MT v4l2_fourcc('T', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 64x32 tiles */
#define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 16x16 tiles */
+#define V4L2_PIX_FMT_NV12M_8L128 v4l2_fourcc('N', 'A', '1', '2') /* Y/CbCr 4:2:0 8x128 tiles */
+#define V4L2_PIX_FMT_NV12M_10BE_8L128 v4l2_fourcc_be('N', 'T', '1', '2') /* Y/CbCr 4:2:0 10-bit 8x128 tiles */
/* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */
#define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B', 'A', '8', '1') /* 8 BGBG.. GRGR.. */
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 08:44:06 +0000