| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit d81efd66106c03771ffc8637855a6ec24caa6350 ]
'old_idx' could be dereferenced after free via 'rb_link_node' function
call.
Fixes: b5fda08ef213 ("ubifs: Fix memleak when insert_old_idx() failed")
Co-developed-by: Ivanov Mikhail <ivanov.mikhail1@huawei-partners.com>
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6a8ebc773ef64c8f12d6d60fd6e53d5ccc81314b ]
Now that we switched to write time activation, we no longer need to (and
must not) count the fresh region as zone unusable. This commit is similar
to revert of commit fa2068d7e922b434eb ("btrfs: zoned: count fresh BG
region as zone unusable").
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 36951fc9460fce96bafd131ceb0f343cae6d3cb9 ]
This reverts commit 4f1b5e739dfd1edde33329e3f376733a131fb1ff.
[Why & How]
Original change causes a regression. Revert
until fix is available.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d48300120627a1cb98914738fff38b424625b8ad ]
As described in commit 8111964f1b85 ("dm thin: Fix ABBA deadlock between
shrink_slab and dm_pool_abort_metadata"), ABBA deadlocks will be
triggered because shrinker_rwsem currently needs to held by
dm_pool_abort_metadata() as a side-effect of thin-pool metadata
operation failure.
The following three problem scenarios have been noticed:
1) Described by commit 8111964f1b85 ("dm thin: Fix ABBA deadlock between
shrink_slab and dm_pool_abort_metadata")
2) shrinker_rwsem and throttle->lock
P1(drop cache) P2(kworker)
drop_caches_sysctl_handler
drop_slab
shrink_slab
down_read(&shrinker_rwsem) - LOCK A
do_shrink_slab
super_cache_scan
prune_icache_sb
dispose_list
evict
ext4_evict_inode
ext4_clear_inode
ext4_discard_preallocations
ext4_mb_load_buddy_gfp
ext4_mb_init_cache
ext4_wait_block_bitmap
__ext4_error
ext4_handle_error
ext4_commit_super
...
dm_submit_bio
do_worker
throttle_work_update
down_write(&t->lock) -- LOCK B
process_deferred_bios
commit
metadata_operation_failed
dm_pool_abort_metadata
dm_block_manager_create
dm_bufio_client_create
register_shrinker
down_write(&shrinker_rwsem)
-- LOCK A
thin_map
thin_bio_map
thin_defer_bio_with_throttle
throttle_lock
down_read(&t->lock) - LOCK B
3) shrinker_rwsem and wait_on_buffer
P1(drop cache) P2(kworker)
drop_caches_sysctl_handler
drop_slab
shrink_slab
down_read(&shrinker_rwsem) - LOCK A
do_shrink_slab
...
ext4_wait_block_bitmap
__ext4_error
ext4_handle_error
jbd2_journal_abort
jbd2_journal_update_sb_errno
jbd2_write_superblock
submit_bh
// LOCK B
// RELEASE B
do_worker
throttle_work_update
down_write(&t->lock) - LOCK B
process_deferred_bios
process_bio
commit
metadata_operation_failed
dm_pool_abort_metadata
dm_block_manager_create
dm_bufio_client_create
register_shrinker
register_shrinker_prepared
down_write(&shrinker_rwsem) - LOCK A
bio_endio
wait_on_buffer
__wait_on_buffer
Fix these by resetting dm_bufio_client without holding shrinker_rwsem.
Fixes: 8111964f1b85 ("dm thin: Fix ABBA deadlock between shrink_slab and dm_pool_abort_metadata")
Cc: stable@vger.kernel.org
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bb5faa99f0ce40756ab7bbbce4f16c01ca5ebd5a ]
Problem:
The max_loop parameter is used for 2 different purposes:
1) initial number of loop devices to pre-create on init
2) maximum number of loop devices to add on access/open()
Historically, its default value (zero) caused 1) to create non-zero
number of devices (CONFIG_BLK_DEV_LOOP_MIN_COUNT), and no hard limit on
2) to add devices with autoloading.
However, the default value changed in commit 85c50197716c ("loop: Fix
the max_loop commandline argument treatment when it is set to 0") to
CONFIG_BLK_DEV_LOOP_MIN_COUNT, for max_loop=0 not to pre-create devices.
That does improve 1), but unfortunately it breaks 2), as the default
behavior changed from no-limit to hard-limit.
Example:
For example, this userspace code broke for N >= CONFIG, if the user
relied on the default value 0 for max_loop:
mknod("/dev/loopN");
open("/dev/loopN"); // now fails with ENXIO
Though affected users may "fix" it with (loop.)max_loop=0, this means to
require a kernel parameter change on stable kernel update (that commit
Fixes: an old commit in stable).
Solution:
The original semantics for the default value in 2) can be applied if the
parameter is not set (ie, default behavior).
This still keeps the intended function in 1) and 2) if set, and that
commit's intended improvement in 1) if max_loop=0.
Before 85c50197716c:
- default: 1) CONFIG devices 2) no limit
- max_loop=0: 1) CONFIG devices 2) no limit
- max_loop=X: 1) X devices 2) X limit
After 85c50197716c:
- default: 1) CONFIG devices 2) CONFIG limit (*)
- max_loop=0: 1) 0 devices (*) 2) no limit
- max_loop=X: 1) X devices 2) X limit
This commit:
- default: 1) CONFIG devices 2) no limit (*)
- max_loop=0: 1) 0 devices 2) no limit
- max_loop=X: 1) X devices 2) X limit
Future:
The issue/regression from that commit only affects code under the
CONFIG_BLOCK_LEGACY_AUTOLOAD deprecation guard, thus the fix too is
contained under it.
Once that deprecated functionality/code is removed, the purpose 2) of
max_loop (hard limit) is no longer in use, so the module parameter
description can be changed then.
Tests:
Linux 6.4-rc7
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
- default (original)
# ls -1 /dev/loop*
/dev/loop-control
/dev/loop0
...
/dev/loop7
# ./test-loop
open: /dev/loop8: No such device or address
- default (patched)
# ls -1 /dev/loop*
/dev/loop-control
/dev/loop0
...
/dev/loop7
# ./test-loop
#
- max_loop=0 (original & patched):
# ls -1 /dev/loop*
/dev/loop-control
# ./test-loop
#
- max_loop=8 (original & patched):
# ls -1 /dev/loop*
/dev/loop-control
/dev/loop0
...
/dev/loop7
# ./test-loop
open: /dev/loop8: No such device or address
- max_loop=0 (patched; CONFIG_BLOCK_LEGACY_AUTOLOAD is not set)
# ls -1 /dev/loop*
/dev/loop-control
# ./test-loop
open: /dev/loop8: No such device or address
Fixes: 85c50197716c ("loop: Fix the max_loop commandline argument treatment when it is set to 0")
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230720143033.841001-3-mfo@canonical.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 285b6a18daf1358e70a4c842884d9ff2d2fe53e2 ]
Commit b0f4c74eadbf ("RISC-V: Fix unannoted hardirqs-on in return to
userspace slow-path") renamed the do_notify_resume function to
do_work_pending but did not change the prototype in signal.h
Do that now, as the original function does not exist anymore.
Fixes: b0f4c74eadbf ("RISC-V: Fix unannoted hardirqs-on in return to userspace slow-path")
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230118142252.337103-1-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a931c6816078af3e306e0f444f492396ce40de31 upstream.
An out of bounds read can occur within the tracepoint 9p_protocol_dump. In
the fast assign, there is a memcpy that uses a constant size of 32 (macro
named P9_PROTO_DUMP_SZ). When the copy is invoked, the source buffer is not
guaranteed match this size. It was found that in some cases the source
buffer size is less than 32, resulting in a read that overruns.
The size of the source buffer seems to be known at the time of the
tracepoint being invoked. The allocations happen within p9_fcall_init(),
where the capacity field is set to the allocated size of the payload
buffer. This patch tries to fix the overrun by changing the fixed array to
a dynamically sized array and using the minimum of the capacity value or
P9_PROTO_DUMP_SZ as its length. The trace log statement is adjusted to
account for this. Note that the trace log no longer splits the payload on
the first 16 bytes. The full payload is now logged to a single line.
To repro the orignal problem, operations to a plan 9 managed resource can
be used. The simplest approach might just be mounting a shared filesystem
(between host and guest vm) using the plan 9 protocol while the tracepoint
is enabled.
mount -t 9p -o trans=virtio <mount_tag> <mount_path>
The bpftrace program below can be used to show the out of bounds read.
Note that a recent version of bpftrace is needed for the raw tracepoint
support. The script was tested using v0.19.0.
/* from include/net/9p/9p.h */
struct p9_fcall {
u32 size;
u8 id;
u16 tag;
size_t offset;
size_t capacity;
struct kmem_cache *cache;
u8 *sdata;
bool zc;
};
tracepoint:9p:9p_protocol_dump
{
/* out of bounds read can happen when this tracepoint is enabled */
}
rawtracepoint:9p_protocol_dump
{
$pdu = (struct p9_fcall *)arg1;
$dump_sz = (uint64)32;
if ($dump_sz > $pdu->capacity) {
printf("reading %zu bytes from src buffer of %zu bytes\n",
$dump_sz, $pdu->capacity);
}
}
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Message-ID: <20231204202321.22730-1-inwardvessel@gmail.com>
Fixes: 60ece0833b6c ("net/9p: allocate appropriate reduced message buffers")
Cc: stable@vger.kernel.org
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 88a173e5dd05e788068e8fa20a8c37c44bd8f416 upstream.
Currently async flips are busted when bigjoiner is in use.
As a short term fix simply reject async flips in that case.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9769
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211081134.2698-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit e93bffc2ac0a833b42841f31fff955549d38ce98)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b35858b3786ddbb56e1c35138ba25d6adf8d0bef upstream.
Validate @smb->WordCount to avoid reading off the end of @smb and thus
causing the following KASAN splat:
BUG: KASAN: slab-out-of-bounds in smbCalcSize+0x32/0x40 [cifs]
Read of size 2 at addr ffff88801c024ec5 by task cifsd/1328
CPU: 1 PID: 1328 Comm: cifsd Not tainted 6.7.0-rc5 #9
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x4a/0x80
print_report+0xcf/0x650
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? __phys_addr+0x46/0x90
kasan_report+0xd8/0x110
? smbCalcSize+0x32/0x40 [cifs]
? smbCalcSize+0x32/0x40 [cifs]
kasan_check_range+0x105/0x1b0
smbCalcSize+0x32/0x40 [cifs]
checkSMB+0x162/0x370 [cifs]
? __pfx_checkSMB+0x10/0x10 [cifs]
cifs_handle_standard+0xbc/0x2f0 [cifs]
? srso_alias_return_thunk+0x5/0xfbef5
cifs_demultiplex_thread+0xed1/0x1360 [cifs]
? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs]
? srso_alias_return_thunk+0x5/0xfbef5
? lockdep_hardirqs_on_prepare+0x136/0x210
? __pfx_lock_release+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? mark_held_locks+0x1a/0x90
? lockdep_hardirqs_on_prepare+0x136/0x210
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? __kthread_parkme+0xce/0xf0
? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs]
kthread+0x18d/0x1d0
? kthread+0xdb/0x1d0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
This fixes CVE-2023-6606.
Reported-by: j51569436@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218218
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 33eae65c6f49770fec7a662935d4eb4a6406d24b upstream.
A small CIFS buffer (448 bytes) isn't big enough to hold
SMB2_QUERY_INFO request along with user's input data from
CIFS_QUERY_INFO ioctl. That is, if the user passed an input buffer >
344 bytes, the client will memcpy() off the end of @req->Buffer in
SMB2_query_info_init() thus causing the following KASAN splat:
BUG: KASAN: slab-out-of-bounds in SMB2_query_info_init+0x242/0x250 [cifs]
Write of size 1023 at addr ffff88801308c5a8 by task a.out/1240
CPU: 1 PID: 1240 Comm: a.out Not tainted 6.7.0-rc4 #5
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x4a/0x80
print_report+0xcf/0x650
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? __phys_addr+0x46/0x90
kasan_report+0xd8/0x110
? SMB2_query_info_init+0x242/0x250 [cifs]
? SMB2_query_info_init+0x242/0x250 [cifs]
kasan_check_range+0x105/0x1b0
__asan_memcpy+0x3c/0x60
SMB2_query_info_init+0x242/0x250 [cifs]
? __pfx_SMB2_query_info_init+0x10/0x10 [cifs]
? srso_alias_return_thunk+0x5/0xfbef5
? smb_rqst_len+0xa6/0xc0 [cifs]
smb2_ioctl_query_info+0x4f4/0x9a0 [cifs]
? __pfx_smb2_ioctl_query_info+0x10/0x10 [cifs]
? __pfx_cifsConvertToUTF16+0x10/0x10 [cifs]
? kasan_set_track+0x25/0x30
? srso_alias_return_thunk+0x5/0xfbef5
? __kasan_kmalloc+0x8f/0xa0
? srso_alias_return_thunk+0x5/0xfbef5
? cifs_strndup_to_utf16+0x12d/0x1a0 [cifs]
? __build_path_from_dentry_optional_prefix+0x19d/0x2d0 [cifs]
? __pfx_smb2_ioctl_query_info+0x10/0x10 [cifs]
cifs_ioctl+0x11c7/0x1de0 [cifs]
? __pfx_cifs_ioctl+0x10/0x10 [cifs]
? srso_alias_return_thunk+0x5/0xfbef5
? rcu_is_watching+0x23/0x50
? srso_alias_return_thunk+0x5/0xfbef5
? __rseq_handle_notify_resume+0x6cd/0x850
? __pfx___schedule+0x10/0x10
? blkcg_iostat_update+0x250/0x290
? srso_alias_return_thunk+0x5/0xfbef5
? ksys_write+0xe9/0x170
__x64_sys_ioctl+0xc9/0x100
do_syscall_64+0x47/0xf0
entry_SYSCALL_64_after_hwframe+0x6f/0x77
RIP: 0033:0x7f893dde49cf
Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48
89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89>
c2 3d 00 f0 ff ff 77 18 48 8b 44 24 18 64 48 2b 04 25 28 00 00
RSP: 002b:00007ffc03ff4160 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffc03ff4378 RCX: 00007f893dde49cf
RDX: 00007ffc03ff41d0 RSI: 00000000c018cf07 RDI: 0000000000000003
RBP: 00007ffc03ff4260 R08: 0000000000000410 R09: 0000000000000001
R10: 00007f893dce7300 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffc03ff4388 R14: 00007f893df15000 R15: 0000000000406de0
</TASK>
Fix this by increasing size of SMB2_QUERY_INFO request buffers and
validating input length to prevent other callers from overflowing @req
in SMB2_query_info_init() as well.
Fixes: f5b05d622a3e ("cifs: add IOCTL for QUERY_INFO passthrough to userspace")
Cc: stable@vger.kernel.org
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b50492b05fd02887b46aef079592207fb5c97a4c upstream.
Validate SMB message with ->check_message() before calling
->calc_smb_size().
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a8f68b11158f09754418de62e6b3e7b9b7a50cc9 upstream.
Validate next header's offset in ->next_header() so that it isn't
smaller than MID_HEADER_SIZE(server) and then standard_receive3() or
->receive() ends up writing off the end of the buffer because
'pdu_length - MID_HEADER_SIZE(server)' wraps up to a huge length:
BUG: KASAN: slab-out-of-bounds in _copy_to_iter+0x4fc/0x840
Write of size 701 at addr ffff88800caf407f by task cifsd/1090
CPU: 0 PID: 1090 Comm: cifsd Not tainted 6.7.0-rc4 #5
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x4a/0x80
print_report+0xcf/0x650
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? __phys_addr+0x46/0x90
kasan_report+0xd8/0x110
? _copy_to_iter+0x4fc/0x840
? _copy_to_iter+0x4fc/0x840
kasan_check_range+0x105/0x1b0
__asan_memcpy+0x3c/0x60
_copy_to_iter+0x4fc/0x840
? srso_alias_return_thunk+0x5/0xfbef5
? hlock_class+0x32/0xc0
? srso_alias_return_thunk+0x5/0xfbef5
? __pfx__copy_to_iter+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? lock_is_held_type+0x90/0x100
? srso_alias_return_thunk+0x5/0xfbef5
? __might_resched+0x278/0x360
? __pfx___might_resched+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
__skb_datagram_iter+0x2c2/0x460
? __pfx_simple_copy_to_iter+0x10/0x10
skb_copy_datagram_iter+0x6c/0x110
tcp_recvmsg_locked+0x9be/0xf40
? __pfx_tcp_recvmsg_locked+0x10/0x10
? mark_held_locks+0x5d/0x90
? srso_alias_return_thunk+0x5/0xfbef5
tcp_recvmsg+0xe2/0x310
? __pfx_tcp_recvmsg+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? lock_acquire+0x14a/0x3a0
? srso_alias_return_thunk+0x5/0xfbef5
inet_recvmsg+0xd0/0x370
? __pfx_inet_recvmsg+0x10/0x10
? __pfx_lock_release+0x10/0x10
? do_raw_spin_trylock+0xd1/0x120
sock_recvmsg+0x10d/0x150
cifs_readv_from_socket+0x25a/0x490 [cifs]
? __pfx_cifs_readv_from_socket+0x10/0x10 [cifs]
? srso_alias_return_thunk+0x5/0xfbef5
cifs_read_from_socket+0xb5/0x100 [cifs]
? __pfx_cifs_read_from_socket+0x10/0x10 [cifs]
? __pfx_lock_release+0x10/0x10
? do_raw_spin_trylock+0xd1/0x120
? _raw_spin_unlock+0x23/0x40
? srso_alias_return_thunk+0x5/0xfbef5
? __smb2_find_mid+0x126/0x230 [cifs]
cifs_demultiplex_thread+0xd39/0x1270 [cifs]
? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs]
? __pfx_lock_release+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? mark_held_locks+0x1a/0x90
? lockdep_hardirqs_on_prepare+0x136/0x210
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? __kthread_parkme+0xce/0xf0
? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs]
kthread+0x18d/0x1d0
? kthread+0xdb/0x1d0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
Fixes: 8ce79ec359ad ("cifs: update multiplex loop to handle compounded responses")
Cc: stable@vger.kernel.org
Reported-by: Robert Morris <rtm@csail.mit.edu>
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a2a8aefecbd0f87d6127951cef33b3def8439057 upstream.
Both imx23.dtsi and imx28.dtsi describe the OCOTP nodes in
the format:
compatible = "fsl,imx28-ocotp", "fsl,ocotp";
Document the "fsl,ocotp" entry to fix the following schema
warning:
efuse@8002c000: compatible: ['fsl,imx23-ocotp', 'fsl,ocotp'] is too long
from schema $id: http://devicetree.org/schemas/nvmem/mxs-ocotp.yaml#
Fixes: 2c504460f502 ("dt-bindings: nvmem: Convert MXS OCOTP to json-schema")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231215111358.316727-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3dc5d44545453de1de9c53cc529cc960a85933da upstream.
There is a bug in the ks8851 Ethernet driver that more data is written
to the hardware TX buffer than actually available. This is caused by
wrong accounting of the free TX buffer space.
The driver maintains a tx_space variable that represents the TX buffer
space that is deemed to be free. The ks8851_start_xmit_spi() function
adds an SKB to a queue if tx_space is large enough and reduces tx_space
by the amount of buffer space it will later need in the TX buffer and
then schedules a work item. If there is not enough space then the TX
queue is stopped.
The worker function ks8851_tx_work() dequeues all the SKBs and writes
the data into the hardware TX buffer. The last packet will trigger an
interrupt after it was send. Here it is assumed that all data fits into
the TX buffer.
In the interrupt routine (which runs asynchronously because it is a
threaded interrupt) tx_space is updated with the current value from the
hardware. Also the TX queue is woken up again.
Now it could happen that after data was sent to the hardware and before
handling the TX interrupt new data is queued in ks8851_start_xmit_spi()
when the TX buffer space had still some space left. When the interrupt
is actually handled tx_space is updated from the hardware but now we
already have new SKBs queued that have not been written to the hardware
TX buffer yet. Since tx_space has been overwritten by the value from the
hardware the space is not accounted for.
Now we have more data queued then buffer space available in the hardware
and ks8851_tx_work() will potentially overrun the hardware TX buffer. In
many cases it will still work because often the buffer is written out
fast enough so that no overrun occurs but for example if the peer
throttles us via flow control then an overrun may happen.
This can be fixed in different ways. The most simple way would be to set
tx_space to 0 before writing data to the hardware TX buffer preventing
the queuing of more SKBs until the TX interrupt has been handled. I have
chosen a slightly more efficient (and still rather simple) way and
track the amount of data that is already queued and not yet written to
the hardware. When new SKBs are to be queued the already queued amount
of data is honoured when checking free TX buffer space.
I tested this with a setup of two linked KS8851 running iperf3 between
the two in bidirectional mode. Before the fix I got a stall after some
minutes. With the fix I saw now issues anymore after hours.
Fixes: 3ba81f3ece3c ("net: Micrel KS8851 SPI network driver")
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231214181112.76052-1-rwahl@gmx.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 23484d817082c3005252d8edfc8292c8a1006b5b upstream.
Fix the undefined usage of the GPIO consumer API after retrieving the
GPIO description with GPIO_ASIS. The API documentation mentions that
GPIO_ASIS won't set a GPIO direction and requires the user to set a
direction before using the GPIO.
This can be confirmed on i.MX6 hardware, where rfkill-gpio is no longer
able to enabled/disable a device, presumably because the GPIO controller
was never configured for the output direction.
Fixes: b2f750c3a80b ("net: rfkill: gpio: prevent value glitch during probe")
Cc: stable@vger.kernel.org
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Link: https://msgid.link/20231207075835.3091694-1-r.czerwinski@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ff49bf1867578f23a5ffdd38f927f6e1e16796c4 upstream.
If some of p9pdu_readf() calls inside case 'T' in p9pdu_vreadf() fails,
the error path is not handled properly. *wnames or members of *wnames
array may be left uninitialized and invalidly freed.
Initialize *wnames to NULL in beginning of case 'T'. Initialize the first
*wnames array element to NULL and nullify the failing *wnames element so
that the error path freeing loop stops on the first NULL element and
doesn't proceed further.
Found by Linux Verification Center (linuxtesting.org).
Fixes: ace51c4dd2f9 ("9p: add new protocol support code")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Message-ID: <20231206200913.16135-1-pchelkin@ispras.ru>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ea3715941a9b7d816a1e9096ac0577900af2a69e upstream.
This add a mapping for the airplane mode button on the TUXEDO Pulse Gen3.
While it is physically a key it behaves more like a switch, sending a key
down on first press and a key up on 2nd press. Therefor the switch event
is used here. Besides this behaviour it uses the HID usage-id 0xc6
(Wireless Radio Button) and not 0xc8 (Wireless Radio Slider Switch), but
since neither 0xc6 nor 0xc8 are currently implemented at all in
soc_button_array this not to standard behaviour is not put behind a quirk
for the moment.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20231215171718.80229-1-wse@tuxedocomputers.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aef05e349bfd81c95adb4489639413fadbb74a83 upstream.
When the device is disconnected we get the following messages showing
failed operations:
Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19
Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19
The reason is that although the device is detached, normal stop and
unbind operations are commanded from the driver. These operations are
not necessary in this situation, so avoid these logs when the device is
detached if the result of the operation is -ENODEV and if the new flag
informing about the disconnecting status is enabled.
cc: <stable@vger.kernel.org>
Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20231207175007.263907-1-jtornosm@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 04a342cc49a8522e99c9b3346371c329d841dcd2 upstream.
When we are slave role and receives l2cap conn req when encryption has
started, we should check the enc key size to avoid KNOB attack or BLUFFS
attack.
From SIG recommendation, implementations are advised to reject
service-level connections on an encrypted baseband link with key
strengths below 7 octets.
A simple and clear way to achieve this is to place the enc key size
check in hci_cc_read_enc_key_size()
The btmon log below shows the case that lacks enc key size check.
> HCI Event: Connect Request (0x04) plen 10
Address: BB:22:33:44:55:99 (OUI BB-22-33)
Class: 0x480104
Major class: Computer (desktop, notebook, PDA, organizers)
Minor class: Desktop workstation
Capturing (Scanner, Microphone)
Telephony (Cordless telephony, Modem, Headset)
Link type: ACL (0x01)
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
Address: BB:22:33:44:55:99 (OUI BB-22-33)
Role: Peripheral (0x01)
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) ncmd 2
Status: Success (0x00)
> HCI Event: Connect Complete (0x03) plen 11
Status: Success (0x00)
Handle: 1
Address: BB:22:33:44:55:99 (OUI BB-22-33)
Link type: ACL (0x01)
Encryption: Disabled (0x00)
...
> HCI Event: Encryption Change (0x08) plen 4
Status: Success (0x00)
Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33)
Encryption: Enabled with E0 (0x01)
< HCI Command: Read Encryption Key Size (0x05|0x0008) plen 2
Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33)
> HCI Event: Command Complete (0x0e) plen 7
Read Encryption Key Size (0x05|0x0008) ncmd 2
Status: Success (0x00)
Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33)
Key size: 6
// We should check the enc key size
...
> ACL Data RX: Handle 1 flags 0x02 dlen 12
L2CAP: Connection Request (0x02) ident 3 len 4
PSM: 25 (0x0019)
Source CID: 64
< ACL Data TX: Handle 1 flags 0x00 dlen 16
L2CAP: Connection Response (0x03) ident 3 len 8
Destination CID: 64
Source CID: 64
Result: Connection pending (0x0001)
Status: Authorization pending (0x0002)
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 1 Address: BB:22:33:44:55:99 (OUI BB-22-33)
Count: 1
#35: len 16 (25 Kb/s)
Latency: 5 msec (2-7 msec ~4 msec)
< ACL Data TX: Handle 1 flags 0x00 dlen 16
L2CAP: Connection Response (0x03) ident 3 len 8
Destination CID: 64
Source CID: 64
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
Cc: stable@vger.kernel.org
Signed-off-by: Alex Lu <alex_lu@realsil.com.cn>
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 59b047bc98084f8af2c41483e4d68a5adf2fa7f7 upstream.
If two Bluetooth devices both support BR/EDR and BLE, and also
support Secure Connections, then they only need to pair once.
The LTK generated during the LE pairing process may be converted
into a BR/EDR link key for BR/EDR transport, and conversely, a
link key generated during the BR/EDR SSP pairing process can be
converted into an LTK for LE transport. Hence, the link type of
the link key and LTK is not fixed, they can be either an LE LINK
or an ACL LINK.
Currently, in the mgmt_new_irk/ltk/crsk/link_key functions, the
link type is fixed, which could lead to incorrect address types
being reported to the application layer. Therefore, it is necessary
to add link_type/addr_type to the smp_irk/ltk/crsk and link_key,
to ensure the generation of the correct address type.
SMP over BREDR:
Before Fix:
> ACL Data RX: Handle 11 flags 0x02 dlen 12
BR/EDR SMP: Identity Address Information (0x09) len 7
Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 00:00:00:00:00:00 (Non-Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
After Fix:
> ACL Data RX: Handle 11 flags 0x02 dlen 12
BR/EDR SMP: Identity Address Information (0x09) len 7
Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 00:00:00:00:00:00 (Non-Resolvable)
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
SMP over LE:
Before Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 5F:5C:07:37:47:D5 (Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated Combination key from P-256 (0x08)
After Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 5E:03:1C:00:38:21 (Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
Store hint: Yes (0x01)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated Combination key from P-256 (0x08)
Cc: stable@vger.kernel.org
Signed-off-by: Xiao Yao <xiaoyao@rock-chips.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 78b99eb1faa7371bf9c534690f26a71b6996622d upstream.
L2CAP/COS/CED/BI-02-C PTS test send a malformed L2CAP signaling packet
with 2 commands in it (a connection request and an unknown command) and
expect to get a connection response packet and a command reject packet.
The second is currently not sent.
Cc: stable@vger.kernel.org
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2e07e8348ea454615e268222ae3fc240421be768 upstream.
This can cause a race with bt_sock_ioctl() because
bt_sock_recvmsg() gets the skb from sk->sk_receive_queue
and then frees it without holding lock_sock.
A use-after-free for a skb occurs with the following flow.
```
bt_sock_recvmsg() -> skb_recv_datagram() -> skb_free_datagram()
bt_sock_ioctl() -> skb_peek()
```
Add lock_sock to bt_sock_recvmsg() to fix this issue.
Cc: stable@vger.kernel.org
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 99e67d46e5ff3c7c901af6009edec72d3d363be8 upstream.
Before setting HCI_INQUIRY bit check if HCI_OP_INQUIRY was really sent
otherwise the controller maybe be generating invalid events or, more
likely, it is a result of fuzzing tools attempting to test the right
behavior of the stack when unexpected events are generated.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218151
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 02a460adfc4920d4da775fb59ab3e54036daef22 upstream.
Asus ROG Flowx13 (GV302XA) seems require same patch as others asus products
Signed-off-by: Clément Villeret <clement.villeret@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/0a27bf4b-3056-49ac-9651-ebd7f3e36328@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 06f22cd6635bdae7d73566fca9879b2026a08e00 upstream.
Add support for Quectel RM500Q R13 firmware which uses Prot=40 for the
NMEA port:
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 8 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=2c7c ProdID=0800 Rev= 4.14
S: Manufacturer=Quectel
S: Product=RM500Q-AE
S: SerialNumber=xxxxxxxx
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 13fde9ac23ca8c6d1ac13cc9eefe1f1ac3ee30a4 upstream.
This ID was added based on latest SDX12 code base line, and we
made some changes with previous 0489:e0db.
Test evidence as below:
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 2
P: Vendor=0489 ProdID=e0da Rev=05.04
S: Manufacturer=Qualcomm
S: Product=Qualcomm Snapdragon X12
S: SerialNumber=2bda65fb
C: #Ifs= 6 Cfg#= 2 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
0&1: MBIM, 2: Modem, 3:GNSS, 4:Diag, 5:ADB
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6d79d9434c69bb8ffa8a631050eb0ad6b83d3e90 upstream.
Add Quectel EG912Y "DIAG, AT, MODEM"
0x6001: ECM / RNDIS + DIAG + AT + MODEM
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=6001 Rev= 3.18
S: Manufacturer=Android
S: Product=Android
S: SerialNumber=0000
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 513d88a88e0203188a38f4647dd08170aebd85df upstream.
Update the constant names for unused USB PIDs (product identifiers) to
reflect the new products now using the PIDs.
Signed-off-by: Mark Glover <mark.glover@actisense.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3c2a8ebe3fe66a5f77d4c164a0bea8e2ff37b455 upstream.
The file for the new certificate (Chen-Yu Tsai's) didn't
end with a comma, so depending on the file order in the
build rule, we'd end up with invalid C when concatenating
the (now two) certificates. Fix that.
Cc: stable@vger.kernel.org
Reported-by: Biju Das <biju.das.jz@bp.renesas.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: fb768d3b13ff ("wifi: cfg80211: Add my certificate")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fb768d3b13ffa325b7e84480d488ac799c9d2cd7 upstream.
As announced [1][2], I have taken over maintainership of the
wireless-regdb project.
Add my certificate so that newer releases are valid to the kernel.
Seth's certificate should be kept around for awhile, at least until
a few new releases by me happen.
This should also be applied to stable trees so that stable kernels
can utilize newly released database binaries.
[1] https://lore.kernel.org/linux-wireless/CAGb2v657baNMPKU3QADijx7hZa=GUcSv2LEDdn6N=QQaFX8r-g@mail.gmail.com/
[2] https://lore.kernel.org/linux-wireless/ZWmRR5ul7EDfxCan@wens.tw/
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Acked-by: Seth Forshee <sforshee@kernel.org>
Link: https://msgid.link/ZXHGsqs34qZyzZng@wens.tw
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 772685c14743ad565bb271041ad3c262298cd6fc upstream.
This flash drive reports write protect during the first mode sense.
In the past this was not an issue as the kernel called revalidate twice,
thus asking the device for its write protect status twice, with write
protect being disabled in the second mode sense.
However, since commit 1e029397d12f ("scsi: sd: Reorganize DIF/DIX code to
avoid calling revalidate twice") that is no longer the case, thus the
device shows up read only.
[490891.289495] sd 12:0:0:0: [sdl] Write Protect is on
[490891.289497] sd 12:0:0:0: [sdl] Mode Sense: 2b 00 80 08
This does not appear to be a timing issue, as enabling the usbcore quirk
USB_QUIRK_DELAY_INIT has no effect on write protect.
Fixes: 1e029397d12f ("scsi: sd: Reorganize DIF/DIX code to avoid calling revalidate twice")
Cc: stable <stable@kernel.org>
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20231207134441.298131-1-tasos@tasossah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 48d6b91798a6694fdd6edb62799754b9d3fe0792 upstream.
Increase the quirk delay from 2 seconds to 4 seconds. This reflects a
change in the Windows driver in which the delay was increased to about
3.7 seconds. The larger delay fixes an issue where the device fails to
work unless it was powered up early during boot.
Also clarify in the quirk comment that the quirk is only applied to
older devices (USB ID 07fd:0008).
Signed-off-by: Jeremie Knuesel <knuesel@gmail.com>
Suggested-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=211975
Link: https://lore.kernel.org/r/20231217112243.33409-1-knuesel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bce61476dc82f114e24e9c2e11fb064781ec563c upstream.
Commit ee708e6baacd ("iio: buffer: introduce support for attaching more
IIO buffers") introduced support for multiple buffers per indio_dev but
left indio_dev->buffer for a few legacy use cases.
In the case of the triggered buffer, iio_triggered_buffer_cleanup()
still assumes that indio_dev->buffer points to the buffer allocated by
iio_triggered_buffer_setup_ext(). However, since
iio_triggered_buffer_setup_ext() now calls iio_device_attach_buffer()
to attach the buffer, indio_dev->buffer will only point to the buffer
allocated by iio_device_attach_buffer() if it the first buffer attached.
This adds a check to make sure that no other buffer has been attached
yet to ensure that indio_dev->buffer will be assigned when
iio_device_attach_buffer() is called.
As per discussion in the review thread, we may want to deal with multiple
triggers per device, but this is a fix for the issue in the meantime and
any such support would be unlikely to be suitable for a backport.
Fixes: ee708e6baacd ("iio: buffer: introduce support for attaching more IIO buffers")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231031210521.1661552-1-dlechner@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 60576e84c187043cef11f11d015249e71151d35a upstream.
Fix wrong handling of a DMA request where the probing only failed
if -EPROPE_DEFER was returned. Instead, let us fail if a non -ENODEV
value is returned. This makes DMAs explicitly optional. Even if the
DMA request is unsuccessfully, the ADC can still work properly.
We do also handle the defer probe case by making use of dev_err_probe().
Fixes: f438b9da75eb ("drivers: iio: ti_am335x_adc: add dma support")
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20230925134427.214556-1-w.egorov@phytec.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 54cf39ec16335dadbe1ba008d8e5e98dae3e26f8 upstream.
The HTU21 offers 4 sampling frequencies: 20, 40, 70 and 120, which are
associated to an index that is used to select the right measurement
resolution and its corresponding measurement time. The current
implementation selects the measurement resolution and the temperature
measurement time properly, but it does not select the right humidity
measurement time in all cases.
In summary, the 40 and 70 humidity measurement times are swapped.
The reason for that is probably the unusual coding for the measurement
resolution. According to the datasheet, the bits [7,0] of the "user
register" are used as follows to select the bit resolution:
--------------------------------------------------
| Bit 7 | Bit 0 | RH | Temp | Trh (us) | Tt (us) |
--------------------------------------------------
| 0 | 0 | 12 | 14 | 16000 | 50000 |
--------------------------------------------------
| 0 | 1 | 8 | 12 | 3000 | 13000 |
--------------------------------------------------
| 1 | 0 | 10 | 13 | 5000 | 25000 |
--------------------------------------------------
| 1 | 1 | 11 | 11 | 8000 | 7000 |
--------------------------------------------------
*This table is available in the official datasheet, page 13/21. I have
just appended the times provided in the humidity/temperature tables,
pages 3/21, 5/21. Note that always a pair of resolutions is selected.
The sampling frequencies [20, 40, 70, 120] are assigned to a linear
index [0..3] which is then coded as follows [1]:
Index [7,0]
--------------
idx 0 0,0
idx 1 1,0
idx 2 0,1
idx 3 1,1
That is done that way because the temperature measurements are being
used as the reference for the sampling frequency (the frequencies and
the temperature measurement times are correlated), so increasing the
index always reduces the temperature measurement time and its
resolution. Therefore, the temperature measurement time array is as
simple as [50000, 25000, 13000, 7000]
On the other hand, the humidity resolution cannot follow the same
pattern because of the way it is coded in the "user register", where
both resolutions are selected at the same time. The humidity measurement
time array is the following: [16000, 3000, 5000, 8000], which defines
the following assignments:
Index [7,0] Trh
-----------------------
idx 0 0,0 16000 -> right, [0,0] selects 12 bits (Trh = 16000)
idx 1 1,0 3000 -> wrong! [1,0] selects 10 bits (Trh = 5000)
idx 2 0,1 5000 -> wrong! [0,1] selects 8 bits (Trh = 3000)
idx 3 1,1 8000 -> right, [1,1] selects 11 bits (Trh = 8000)
The times have been ordered as if idx = 1 -> [0,1] and idx = 2 -> [1,0],
which is not the case for the reason explained above.
So a simple modification is required to obtain the right humidity
measurement time array, swapping the values in the positions 1 and 2.
The right table should be the following: [16000, 5000, 3000, 8000]
Fix the humidity measurement time array with the right idex/value
coding.
[1] The actual code that makes this coding and assigns it to the current
value of the "user register" is the following:
config_reg &= 0x7E;
config_reg |= ((i & 1) << 7) + ((i & 2) >> 1);
Fixes: d574a87cc311 ("Add meas-spec sensors common part")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20231026-topic-htu21_conversion_time-v1-1-bd257dc44209@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 08c94d80b2da481652fb633e79cbc41e9e326a91 ]
skb_share_check() already drops the reference to the skb when returning
NULL. Using kfree_skb() in the error handling path leads to an skb double
free.
Fix this by removing the variable tmp_skb, and return directly when
skb_share_check() returns NULL.
Fixes: 01a4cc4d0cd6 ("bnx2fc: do not add shared skbs to the fcoe_rx_list")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20221114110626.526643-1-weiyongjun@huaweicloud.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 59b6a747e2d39227ac2325c5e29d6ab3bb070c2a ]
Check the return value of i2c_add_adapter. Static analysis revealed that
the function did not properly handle potential failures of
i2c_add_adapter, which could lead to partial initialization of the I2C
adapter and unstable operation.
Signed-off-by: Haoran Liu <liuhaoran14@163.com>
Link: https://lore.kernel.org/r/20231203164653.38983-1-liuhaoran14@163.com
Fixes: d7535ffa427b ("Input: driver for microcontroller keys on the iPaq h3xxx")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bfc7db1cb94ad664546d70212699f8cc6c539e8c ]
Add the generic icc sync_state callback to ensure interconnect votes
are taken into account, instead of being pegged at maximum values.
Fixes: b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231130-topic-8250icc_syncstate-v1-1-7ce78ba6e04c@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c3df0e29fb7788c4b3ddf37d5ed87dda2b822943 ]
inv_mpu6050_sensor_show() can return -EINVAL or IIO_VAL_INT. Return the
true value rather than only return IIO_VAL_INT.
Fixes: d5098447147c ("iio: imu: mpu6050: add calibration offset support")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231030020218.65728-1-suhui@nfschina.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ad2ab1297d0c80899125a842bb7a078abfe1e6ce ]
Currently, if provider->xlate() or provider->xlate_extended()
"successfully" return a NULL node, then of_icc_get_from_provider() won't
consider that an error and will successfully return the NULL node. This
bypasses error handling in of_icc_get_by_index() and leads to NULL
dereferences in path_find().
This could be avoided by ensuring provider callbacks always return an
error for NULL nodes, but it's better to explicitly protect against this
in the common framework.
Fixes: 87e3031b6fbd ("interconnect: Allow endpoints translation via DT")
Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com>
Link: https://lore.kernel.org/r/20231025145829.11603-1-quic_mdtipton@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
the original
[ Upstream commit 324b70e997aab0a7deab8cb90711faccda4e98c8 ]
plane_view_scanout_stride() currently assumes that we had to pad the
mapping stride with dummy pages in order to align it. But that is not
the case if the original fb stride exceeds the aligned stride used
to populate the remapped view, which is calculated from the user
specified framebuffer width rather than the user specified framebuffer
stride.
Ignore the original fb stride in this case and just stick to the POT
aligned stride. Getting this wrong will cause the plane to fetch the
wrong data, and can lead to fault errors if the page tables at the
bogus location aren't even populated.
TODO: figure out if this is OK for CCS, or if we should instead increase
the width of the view to cover the entire user specified fb stride
instead...
Cc: Imre Deak <imre.deak@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231204202443.31247-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
(cherry picked from commit 01a39f1c4f1220a4e6a25729fae87ff5794cbc52)
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0da6bfe857ea9399498876cbe6ef428637b6e475 ]
Add support for remapping CCS FBs on MTL to remove the restriction
of the power-of-two sized stride and the 2MB surface offset alignment
for these FBs.
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230505144005.23480-2-nirmoy.das@intel.com
Stable-dep-of: 324b70e997aa ("drm/i915: Fix ADL+ tiled plane stride when the POT stride is smaller than the original")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ef5cb493a9acd7d97870d6e542020980ae3f3483 ]
If we want to test with DPT disabled on ADL the POT stride remap
stuff needs to be disabled. Make it depend on actual DPT usage
instead of just assuming it based on the modifier.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-3-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Stable-dep-of: 324b70e997aa ("drm/i915: Fix ADL+ tiled plane stride when the POT stride is smaller than the original")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c3070f080f9ba18dea92eaa21730f7ab85b5c8f4 ]
Since the plane_state variable is declared outside the scaler_users
loop in intel_atomic_setup_scalers(), and it's never reset back to
NULL inside the loop we may end up calling intel_atomic_setup_scaler()
with a non-NULL plane state for the pipe scaling case. That is bad
because intel_atomic_setup_scaler() determines whether we are doing
plane scaling or pipe scaling based on plane_state!=NULL. The end
result is that we may miscalculate the scaler mode for pipe scaling.
The hardware becomes somewhat upset if we end up in this situation
when scanning out a planar format on a SDR plane. We end up
programming the pipe scaler into planar mode as well, and the
result is a screenfull of garbage.
Fix the situation by making sure we pass the correct plane_state==NULL
when calculating the scaler mode for pipe scaling.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207193441.20206-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit e81144106e21271c619f0c722a09e27ccb8c043d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8976b18249407df8bf6ea18ecae0640a15341a50 ]
Move intel_atomic_setup_scalers() next to the other scaler
code in skl_scaler.c.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418175528.13117-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Stable-dep-of: c3070f080f9b ("drm/i915: Fix intel_atomic_setup_scalers() plane_state handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8d4312e2b228ba7a5ac79154458098274ec61e9b ]
In newer hardware versions (i.e. display version >= 14), the second
scaler doesn't support vertical scaling.
The current implementation of the scaling limits is simplified and
only occurs when the planes are created, so we don't know which scaler
is being used.
In order to handle separate scaling limits for horizontal and vertical
scaling, and different limits per scaler, split the checks in two
phases. We first do a simple check during plane creation and use the
best-case scenario (because we don't know the scaler that may be used
at a later point) and then do a more specific check when the scalers
are actually being set up.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221223130509.43245-2-luciano.coelho@intel.com
Stable-dep-of: c3070f080f9b ("drm/i915: Fix intel_atomic_setup_scalers() plane_state handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f6fe0b2d35457c10ec37acc209d19726bdc16dbd ]
the nvme_handle_cqe() interrupt handler calls nvme_complete_async_event()
but the latter may call nvme_auth_stop() which is a blocking function.
Sleeping functions can't be called in interrupt context
BUG: sleeping function called from invalid context
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/15
Call Trace:
<IRQ>
__cancel_work_timer+0x31e/0x460
? nvme_change_ctrl_state+0xcf/0x3c0 [nvme_core]
? nvme_change_ctrl_state+0xcf/0x3c0 [nvme_core]
nvme_complete_async_event+0x365/0x480 [nvme_core]
nvme_poll_cq+0x262/0xe50 [nvme]
Fix the bug by moving nvme_auth_stop() to fw_act_work
(executed by the nvme_wq workqueue)
Fixes: f50fff73d620 ("nvme: implement In-Band authentication")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1d656bd259edb89dc1d9938ec5c5389867088546 ]
While the GPIO cdev gpio_ioctl() call is in progress, the kernel can
call gpiochip_remove() which will set gdev->chip to NULL, after which
any subsequent access will cause a crash.
gpio_ioctl() was overlooked by the previous fix to protect syscalls
(bdbbae241a04), so add protection for that.
Fixes: bdbbae241a04 ("gpiolib: protect the GPIO device against being dropped while in use by user-space")
Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Fixes: 3c0d9c635ae2 ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL")
Fixes: aad955842d1c ("gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 14694179e561b5f2f7e56a0f590e2cb49a9cc7ab ]
Trying to suspend to RAM on SAMA5D27 EVK leads to the following lockdep
warning:
============================================
WARNING: possible recursive locking detected
6.7.0-rc5-wt+ #532 Not tainted
--------------------------------------------
sh/92 is trying to acquire lock:
c3cf306c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100
but task is already holding lock:
c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&irq_desc_lock_class);
lock(&irq_desc_lock_class);
*** DEADLOCK ***
May be due to missing lock nesting notation
6 locks held by sh/92:
#0: c3aa0258 (sb_writers#6){.+.+}-{0:0}, at: ksys_write+0xd8/0x178
#1: c4c2df44 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x138/0x284
#2: c32684a0 (kn->active){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x148/0x284
#3: c232b6d4 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x13c/0x4e8
#4: c387b088 (&dev->mutex){....}-{3:3}, at: __device_suspend+0x1e8/0x91c
#5: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100
stack backtrace:
CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ #532
Hardware name: Atmel SAMA5
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x48
dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c
__lock_acquire from lock_acquire.part.0+0x124/0x2d0
lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78
_raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100
__irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204
irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4
atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204
irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8
gpio_keys_suspend from dpm_run_callback+0xe4/0x248
dpm_run_callback from __device_suspend+0x234/0x91c
__device_suspend from dpm_suspend+0x224/0x43c
dpm_suspend from dpm_suspend_start+0x9c/0xa8
dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84
suspend_devices_and_enter from pm_suspend+0x460/0x4e8
pm_suspend from state_store+0x78/0xe4
state_store from kernfs_fop_write_iter+0x1a0/0x284
kernfs_fop_write_iter from vfs_write+0x38c/0x6f4
vfs_write from ksys_write+0xd8/0x178
ksys_write from ret_fast_syscall+0x0/0x1c
Exception stack(0xc52b3fa8 to 0xc52b3ff0)
3fa0: 00000004 005a0ae8 00000001 005a0ae8 00000004 00000001
3fc0: 00000004 005a0ae8 00000001 00000004 00000004 b6c616c0 00000020 0059d190
3fe0: 00000004 b6c61678 aec5a041 aebf1a26
This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever
a wake up source configures an IRQ through irq_set_irq_wake, it will
lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent"
IRQ which will do the same on its own IRQ desc, but since those two locks
share the same class, lockdep reports this as an issue.
Fix lockdep false positive by setting a different class for parent and
children IRQ
Fixes: 776180848b57 ("pinctrl: introduce driver for Atmel PIO4 controller")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20231215-lockdep_warning-v1-1-8137b2510ed5@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 93cd0597649844a0fe7989839a3202735fb3ae67 ]
Xen only supports modern CPUs even when running a 32-bit kernel, and it now
requires a kernel built for a 64 byte (or larger) cache line:
In file included from <command-line>:
In function 'xen_vcpu_setup',
inlined from 'xen_vcpu_setup_restore' at arch/x86/xen/enlighten.c:111:3,
inlined from 'xen_vcpu_restore' at arch/x86/xen/enlighten.c:141:3:
include/linux/compiler_types.h:435:45: error: call to '__compiletime_assert_287' declared with attribute error: BUILD_BUG_ON failed: sizeof(*vcpup) > SMP_CACHE_BYTES
arch/x86/xen/enlighten.c:166:9: note: in expansion of macro 'BUILD_BUG_ON'
166 | BUILD_BUG_ON(sizeof(*vcpup) > SMP_CACHE_BYTES);
| ^~~~~~~~~~~~
Enforce the dependency with a whitelist of CPU configurations. In normal
distro kernels, CONFIG_X86_GENERIC is enabled, and this works fine. When this
is not set, still allow Xen to be built on kernels that target a 64-bit
capable CPU.
Fixes: db2832309a82 ("x86/xen: fix percpu vcpu_info allocation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Alyssa Ross <hi@alyssa.is>
Link: https://lore.kernel.org/r/20231204084722.3789473-1-arnd@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
