aboutsummaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)Author
2024-02-13HID: wacom: generic: Avoid reporting a serial of '0' to userspaceTatsunosuke Tobita
The xf86-input-wacom driver does not treat '0' as a valid serial number and will drop any input report which contains an MSC_SERIAL = 0 event. The kernel driver already takes care to avoid sending any MSC_SERIAL event if the value of serial[0] == 0 (which is the case for devices that don't actually report a serial number), but this is not quite sufficient. Only the lower 32 bits of the serial get reported to userspace, so if this portion of the serial is zero then there can still be problems. This commit allows the driver to report either the lower 32 bits if they are non-zero or the upper 32 bits otherwise. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com> Fixes: f85c9dc678a5 ("HID: wacom: generic: Support tool ID and additional tool types") CC: stable@vger.kernel.org # v4.10 Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-02-13HID: Intel-ish-hid: Ishtp: Fix sensor reads after ACPI S3 suspendEven Xu
After legacy suspend/resume via ACPI S3, sensor read operation fails with timeout. Also, it will cause delay in resume operation as there will be retries on failure. This is caused by commit f645a90e8ff7 ("HID: intel-ish-hid: ishtp-hid-client: use helper functions for connection"), which used helper functions to simplify connect, reset and disconnect process. Also avoid freeing and allocating client buffers again during reconnect process. But there is a case, when ISH firmware resets after ACPI S3 suspend, ishtp bus driver frees client buffers. Since there is no realloc again during reconnect, there are no client buffers available to send connection requests to the firmware. Without successful connection to the firmware, subsequent sensor reads will timeout. To address this issue, ishtp bus driver does not free client buffers on warm reset after S3 resume. Simply add the buffers from the read list to free list of buffers. Fixes: f645a90e8ff7 ("HID: intel-ish-hid: ishtp-hid-client: use helper functions for connection") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218442 Signed-off-by: Even Xu <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-02-13HID: multitouch: Add required quirk for Synaptics 0xcddc deviceManuel Fombuena
Add support for the pointing stick (Accupoint) and 2 mouse buttons. Present on some Toshiba/dynabook Portege X30 and X40 laptops. It should close https://bugzilla.kernel.org/show_bug.cgi?id=205817 Signed-off-by: Manuel Fombuena <fombuena@outlook.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-02-06HID: wacom: Do not register input devices until after hid_hw_startJason Gerecke
If a input device is opened before hid_hw_start is called, events may not be received from the hardware. In the case of USB-backed devices, for example, the hid_hw_start function is responsible for filling in the URB which is submitted when the input device is opened. If a device is opened prematurely, polling will never start because the device will not have been in the correct state to send the URB. Because the wacom driver registers its input devices before calling hid_hw_start, there is a window of time where a device can be opened and end up in an inoperable state. Some ARM-based Chromebooks in particular reliably trigger this bug. This commit splits the wacom_register_inputs function into two pieces. One which is responsible for setting up the allocated inputs (and runs prior to hid_hw_start so that devices are ready for any input events they may end up receiving) and another which only registers the devices (and runs after hid_hw_start to ensure devices can be immediately opened without issue). Note that the functions to initialize the LEDs and remotes are also moved after hid_hw_start to maintain their own dependency chains. Fixes: 7704ac937345 ("HID: wacom: implement generic HID handling for pen generic devices") Cc: stable@vger.kernel.org # v3.18+ Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Tested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-02-06HID: logitech-hidpp: Do not flood kernel logOleksandr Natalenko
Since commit 680ee411a98e ("HID: logitech-hidpp: Fix connect event race") the following messages appear in the kernel log from time to time: logitech-hidpp-device 0003:046D:408A.0005: HID++ 4.5 device connected. logitech-hidpp-device 0003:046D:408A.0005: HID++ 4.5 device connected. logitech-hidpp-device 0003:046D:4051.0006: Disconnected logitech-hidpp-device 0003:046D:408A.0005: Disconnected As discussed, print the first per-device "device connected" message at info level, demoting subsequent messages to debug level. Also, demote the "Disconnected message" to debug level unconditionally. Link: https://lore.kernel.org/lkml/3277085.44csPzL39Z@natalenko.name/ Signed-off-by: Oleksandr Natalenko <oleksandr@natalenko.name> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-01-31HID: bpf: use __bpf_kfunc instead of noinlineBenjamin Tissoires
Follow the docs at Documentation/bpf/kfuncs.rst: - declare the function with `__bpf_kfunc` - disables missing prototype warnings, which allows to remove them from include/linux/hid-bpf.h Removing the prototypes is not an issue because we currently have to redeclare them when writing the BPF program. They will eventually be generated by bpftool directly AFAIU. Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-3-052520b1e5e6@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-01-31HID: bpf: actually free hdev memory after attaching a HID-BPF programBenjamin Tissoires
Turns out that I got my reference counts wrong and each successful bus_find_device() actually calls get_device(), and we need to manually call put_device(). Ensure each bus_find_device() gets a matching put_device() when releasing the bpf programs and fix all the error paths. Cc: <stable@vger.kernel.org> Fixes: f5c27da4e3c8 ("HID: initial BPF implementation") Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-2-052520b1e5e6@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-01-31HID: bpf: remove double fdget()Benjamin Tissoires
When the kfunc hid_bpf_attach_prog() is called, we called twice fdget(): one for fetching the type of the bpf program, and one for actually attaching the program to the device. The problem is that between those two calls, we have no guarantees that the prog_fd is still the same file descriptor for the given program. Solve this by calling bpf_prog_get() earlier, and use this to fetch the program type. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/bpf/CAO-hwJJ8vh8JD3-P43L-_CLNmPx0hWj44aom0O838vfP4=_1CA@mail.gmail.com/T/#t Cc: <stable@vger.kernel.org> Fixes: f5c27da4e3c8 ("HID: initial BPF implementation") Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-1-052520b1e5e6@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-01-26HID: i2c-hid-of: fix NULL-deref on failed power upJohan Hovold
A while back the I2C HID implementation was split in an ACPI and OF part, but the new OF driver never initialises the client pointer which is dereferenced on power-up failures. Fixes: b33752c30023 ("HID: i2c-hid: Reorganize so ACPI and OF are separate modules") Cc: stable@vger.kernel.org # 5.12 Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-01-25HID: hidraw: fix a problem of memory leak in hidraw_release()Su Hui
'struct hidraw_list' is a circular queue whose head can be smaller than tail. Using 'list->tail != list->head' to release all memory that should be released. Fixes: a5623a203cff ("HID: hidraw: fix memory leak in hidraw_release()") Signed-off-by: Su Hui <suhui@nfschina.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-01-23HID: i2c-hid: Skip SET_POWER SLEEP for Cirque touchpad on system suspendKai-Heng Feng
There's a Cirque touchpad that wakes system up without anything touched the touchpad. The input report is empty when this happens. The reason is stated in HID over I2C spec, 7.2.8.2: "If the DEVICE wishes to wake the HOST from its low power state, it can issue a wake by asserting the interrupt." This is fine if OS can put system back to suspend by identifying input wakeup count stays the same on resume, like Chrome OS Dark Resume [0]. But for regular distro such policy is lacking. Though the change doesn't bring any impact on power consumption for touchpad is minimal, other i2c-hid device may depends on SLEEP control power. So use a quirk to limit the change scope. [0] https://chromium.googlesource.com/chromiumos/platform2/+/HEAD/power_manager/docs/dark_resume.md Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-01-23HID: nvidia-shield: Add missing null pointer checks to LED initializationKunwu Chan
devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity. [jkosina@suse.com: tweak changelog a bit] Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-01-22HID: logitech-hidpp: add support for Logitech G Pro X Superlight 2Jiri Kosina
Let logitech-hidpp driver claim Logitech G Pro X Superlight 2. Reported-by: Marcus Rückert <darix@opensu.se> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-01-15HID: hid-steam: Fix cleanup in probe()Dan Carpenter
There are a number of issues in this code. First of all if steam_create_client_hid() fails then it leads to an error pointer dereference when we call hid_destroy_device(steam->client_hdev). Also there are a number of leaks. hid_hw_stop() is not called if hid_hw_open() fails for example. And it doesn't call steam_unregister() or hid_hw_close(). Fixes: 691ead124a0c ("HID: hid-steam: Clean up locking") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/1fd87904-dabf-4879-bb89-72d13ebfc91e@moroto.mountain Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-01-15HID: hid-steam: remove pointless error messageDan Carpenter
This error message doesn't really add any information. If modprobe fails then the user will already know what the error code is. In the case of kmalloc() it's a style violation to print an error message for that because kmalloc has it's own better error messages built in. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/305898fb-6bd4-4749-806c-05ec51bbeb80@moroto.mountain Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-01-12Merge tag 'hid-for-linus-2024010801' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - assorted functional fixes for hid-steam ported from SteamOS betas (Vicki Pfau) - fix for custom sensor-hub sensors (hinge angle sensor and LISS sensors) not working (Yauhen Kharuzhy) - functional fix for handling Confidence in Wacom driver (Jason Gerecke) - support for Ilitek ili2901 touchscreen (Zhengqiao Xia) - power management fix for Wacom userspace battery exporting (Tatsunosuke Tobita) - rework of wait-for-reset in order to reduce the need for I2C_HID_QUIRK_NO_IRQ_AFTER_RESET qurk; the success rate is now 50% better, but there are still further improvements to be made (Hans de Goede) - greatly improved coverage of Tablets in hid-selftests (Benjamin Tissoires) - support for Nintendo NSO controllers -- SNES, Genesis and N64 (Ryan McClelland) - support for controlling mcp2200 GPIOs (Johannes Roith) - power management improvement for EHL OOB wakeup in intel-ish (Kai-Heng Feng) - other assorted device-specific fixes and code cleanups * tag 'hid-for-linus-2024010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (53 commits) HID: amd_sfh: Add a new interface for exporting ALS data HID: amd_sfh: Add a new interface for exporting HPD data HID: amd_sfh: rename float_to_int() to amd_sfh_float_to_int() HID: i2c-hid: elan: Add ili2901 timing dt-bindings: HID: i2c-hid: elan: Introduce Ilitek ili2901 HID: bpf: make bus_type const in struct hid_bpf_ops HID: make ishtp_cl_bus_type const HID: make hid_bus_type const HID: hid-steam: Add gamepad-only mode switched to by holding options HID: hid-steam: Better handling of serial number length HID: hid-steam: Update list of identifiers from SDL HID: hid-steam: Make client_opened a counter HID: hid-steam: Clean up locking HID: hid-steam: Disable watchdog instead of using a heartbeat HID: hid-steam: Avoid overwriting smoothing parameter HID: magicmouse: fix kerneldoc for struct magicmouse_sc HID: sensor-hub: Enable hid core report processing for all devices HID: wacom: Add additional tests of confidence behavior HID: wacom: Correct behavior when processing some confidence == false touches HID: nintendo: add support for nso controllers ...
2024-01-12Merge tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "This contains two major new drivers: - imagination is a first driver for Imagination Technologies devices, it only covers very specific devices, but there is hope to grow it - xe is a reboot of the i915 GPU (shares display) side using a more upstream focused development model, and trying to maximise code sharing. It's not enabled for any hw by default, and will hopefully get switched on for Intel's Lunarlake. This also drops a bunch of the old UMS ioctls. It's been dead long enough. amdgpu has a bunch of new color management code that is being used in the Steam Deck. amdgpu also has a new ACPI WBRF interaction to help avoid radio interference. Otherwise it's the usual lots of changes in lots of places. Detailed summary: new drivers: - imagination - new driver for Imagination Technologies GPU - xe - new driver for Intel GPUs using core drm concepts core: - add CLOSE_FB ioctl - remove old UMS ioctls - increase max objects to accomodate AMD color mgmt encoder: - create per-encoder debugfs directory edid: - split out drm_eld - SAD helpers - drop edid_firmware module parameter format-helper: - cache format conversion buffers sched: - move from kthread to workqueue - rename some internals - implement dynamic job-flow control gpuvm: - provide more features to handle GEM objects client: - don't acquire module reference displayport: - add mst path property documentation fdinfo: - alignment fix dma-buf: - add fence timestamp helper - add fence deadline support bridge: - transparent aux-bridge for DP/USB-C - lt8912b: add suspend/resume support and power regulator support panel: - edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49 - chromebook panel support - elida-kd35t133: rework pm - powkiddy RK2023 panel - himax-hx8394: drop prepare/unprepare and shutdown logic - BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G - Evervision VGG644804, SDC ATNA45AF01 - nv3052c: register docs, init sequence fixes, fascontek FS035VG158 - st7701: Anbernic RG-ARC support - r63353 panel controller - Ilitek ILI9805 panel controller - AUO G156HAN04.0 simplefb: - support memory regions - support power domains amdgpu: - add new 64-bit sequence number infrastructure - add AMD specific color management - ACPI WBRF support for RF interference handling - GPUVM updates - RAS updates - DCN 3.5 updates - Rework PCIe link speed handling - Document GPU reset types - DMUB fixes - eDP fixes - NBIO 7.9/7.11 updates - SubVP updates - XGMI PCIe state dumping for aqua vanjaram - GFX11 golden register updates - enable tunnelling on high pri compute amdkfd: - Migrate TLB flushing logic to amdgpu - Trap handler fixes - Fix restore workers handling on suspend/resume - Fix possible memory leak in pqm_uninit() - support import/export of dma-bufs using GEM handles radeon: - fix possible overflows in command buffer checking - check for errors in ring_lock i915: - reorg display code for reuse in xe driver - fdinfo memory stats printing - DP MST bandwidth mgmt improvements - DP panel replay enabling - MTL C20 phy state verification - MTL DP DSC fractional bpp support - Audio fastset support - use dma_fence interfaces instead of i915_sw_fence - Separate gem and display code - AUX register macro refactoring - Separate display module/device parameters - Move display capabilities debugfs under display - Makefile cleanups - Register cleanups - Move display lock inits under display/ - VLV/CHV DPIO PHY register and interface refactoring - DSI VBT sequence refactoring - C10/C20 PHY PLL hardware readout - DPLL code cleanups - Cleanup PXP plane protection checks - Improve display debug msgs - PSR selective fetch fixes/improvements - DP MST fixes - Xe2LPD FBC restrictions removed - DGFX uses direct VBT pin mapping - more MTL WAs - fix MTL eDP bug - eliminate use of kmap_atomic habanalabs: - sysfs entry to identify a device minor id with debugfs path - sysfs entry to expose device module id - add signed device info retrieval through INFO ioctl - add Gaudi2C device support - pcie reset prepare/done hooks msm: - Add support for SDM670, SM8650 - Handle the CFG interconnect to fix the obscure hangs / timeouts - Kconfig fix for QMP dependency - use managed allocators - DPU: SDM670, SM8650 support - DPU: Enable SmartDMA on SM8350 and SM8450 - DP: enable runtime PM support - GPU: add metadata UAPI - GPU: move devcoredumps to GPU device - GPU: convert to drm_exec ivpu: - update FW API - new debugfs file - a new NOP job submission test mode - improve suspend/resume - PM improvements - MMU PT optimizations - firmware profile frequency support - support for uncached buffers - switch to gem shmem helpers - replace kthread with threaded irqs rockchip: - rk3066_hdmi: convert to atomic - vop2: support nv20 and nv30 - rk3588 support mediatek: - use devm_platform_ioremap_resource - stop using iommu_present - MT8188 VDOSYS1 display support panfrost: - PM improvements - improve interrupt handling as poweroff qaic: - allow to run with single MSI - support host/device time sync - switch to persistent DRM devices exynos: - fix potential error pointer dereference - fix wrong error checking - add missing call to drm_atomic_helper_shutdown omapdrm: - dma-fence lockdep annotation fix tidss: - dma-fence lockdep annotation fix - support for AM62A7 v3d: - BCM2712 - rpi5 support - fdinfo + gputop support - uapi for CPU job handling virtio-gpu: - add context debug name" * tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm: (2340 commits) drm/amd/display: Allow z8/z10 from driver drm/amd/display: fix bandwidth validation failure on DCN 2.1 drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well drm/amd/display: Move fixpt_from_s3132 to amdgpu_dm drm/amd/display: Fix recent checkpatch errors in amdgpu_dm Revert "drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole" drm/amd/display: avoid stringop-overflow warnings for dp_decide_lane_settings() drm/amd/display: Fix power_helpers.c codestyle drm/amd/display: Fix hdcp_log.h codestyle drm/amd/display: Fix hdcp2_execution.c codestyle drm/amd/display: Fix hdcp_psp.h codestyle drm/amd/display: Fix freesync.c codestyle drm/amd/display: Fix hdcp_psp.c codestyle drm/amd/display: Fix hdcp1_execution.c codestyle drm/amd/pm/smu7: fix a memleak in smu7_hwmgr_backend_init drm/amdkfd: Fix iterator used outside loop in 'kfd_add_peer_prop()' drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()' drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c drm/amdgpu: Fix '*fw' from request_firmware() not released in 'amdgpu_ucode_request()' drm/amdgpu: Fix variable 'mca_funcs' dereferenced before NULL check in 'amdgpu_mca_smu_get_mca_entry()' ...
2024-01-10Merge tag 'hardening-v6.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: - Introduce the param_unknown_fn type and other clean ups (Andy Shevchenko) - Various __counted_by annotations (Christophe JAILLET, Gustavo A. R. Silva, Kees Cook) - Add KFENCE test to LKDTM (Stephen Boyd) - Various strncpy() refactorings (Justin Stitt) - Fix qnx4 to avoid writing into the smaller of two overlapping buffers - Various strlcpy() refactorings * tag 'hardening-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: qnx4: Use get_directory_fname() in qnx4_match() qnx4: Extract dir entry filename processing into helper atags_proc: Add __counted_by for struct buffer and use struct_size() tracing/uprobe: Replace strlcpy() with strscpy() params: Fix multi-line comment style params: Sort headers params: Use size_add() for kmalloc() params: Do not go over the limit when getting the string length params: Introduce the param_unknown_fn type lkdtm: Add kfence read after free crash type nvme-fc: replace deprecated strncpy with strscpy nvdimm/btt: replace deprecated strncpy with strscpy nvme-fabrics: replace deprecated strncpy with strscpy drm/modes: replace deprecated strncpy with strscpy_pad afs: Add __counted_by for struct afs_acl and use struct_size() VMCI: Annotate struct vmci_handle_arr with __counted_by i40e: Annotate struct i40e_qvlist_info with __counted_by HID: uhid: replace deprecated strncpy with strscpy samples: Replace strlcpy() with strscpy() SUNRPC: Replace strlcpy() with strscpy()
2024-01-08Merge branch 'for-6.8/wacom' into for-linusJiri Kosina
- functional fix for handling Confidence in Wacom driver (Jason Gerecke) - power management fix for Wacom userspace battery exporting (Tatsunosuke Tobita) Conflicts: tools/testing/selftests/hid/tests/test_wacom_generic.py
2024-01-08Merge branch 'for-6.8/steam' into for-linusJiri Kosina
- assorted functional fixes for hid-steam ported from SteamOS betas (Vicki Pfau)
2024-01-08Merge branch 'for-6.8/sensor-hub' into for-linusJiri Kosina
- fix for custom sensor-hub sensors (hinge angle sensor and LISS sensors) not working (Yauhen Kharuzhy)
2024-01-08Merge branch 'for-6.8/nintendo' into for-linusJiri Kosina
- support for Nintendo NSO controllers -- SNES, Genesis and N64 (Ryan McClelland)
2024-01-08Merge branch 'for-6.8/mcp2221' into for-linusJiri Kosina
- several assorted functional fixes for mcp2221 driver (Hamish Martin)
2024-01-08Merge branch 'for-6.8/mcp2200' into for-linusJiri Kosina
- support for controlling mcp2200 GPIOs (Johannes Roith)
2024-01-08Merge branch 'for-6.8/intel-ish' into for-linusJiri Kosina
- power management improvement for EHL OOB wakeup in intel-ish (Kai-Heng Feng) - generic intel-ish code cleanups (Even Xu)
2024-01-08Merge branch 'for-6.8/i2c-hid' into for-linusJiri Kosina
- rework of wait-for-reset in order to reduce the need for I2C_HID_QUIRK_NO_IRQ_AFTER_RESET qurk; the success rate is now 50% better, but there are still further improvements to be made (Hans de Goede)
2024-01-08Merge branch 'for-6.8/hid-bus-type-const' into for-linusJiri Kosina
- bus_type constification (Greg Kroah-Hartman)
2024-01-08Merge branch 'for-6.8/elan' into for-linusJiri Kosina
- support for Ilitek ili2901 touchscreen (Zhengqiao Xia)
2024-01-08Merge branch 'for-6.8/amd-sfh' into for-linusJiri Kosina
- addition of new interfaces to export User presence information and Ambient light from amd-sfh to other drivers within the kernel (Basavaraj Natikar)
2024-01-04HID: amd_sfh: Add a new interface for exporting ALS dataBasavaraj Natikar
AMDSFH has information about the Ambient light via the Ambient Light Sensor (ALS) which is part of the AMD sensor fusion hub. Add a new interface to export this information, where other drivers like PMF can use this information to enhance user experiences. Link: https://lore.kernel.org/all/ad064333-48a4-4cfa-9428-69e8a7c44667@redhat.com/ Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-01-04HID: amd_sfh: Add a new interface for exporting HPD dataBasavaraj Natikar
AMDSFH has information about the User presence information via the Human Presence Detection (HPD) sensor which is part of the AMD sensor fusion hub. Add a new interface to export this information, where other drivers like PMF can use this information to enhance user experiences. Link: https://lore.kernel.org/all/ad064333-48a4-4cfa-9428-69e8a7c44667@redhat.com/ Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-01-04HID: amd_sfh: rename float_to_int() to amd_sfh_float_to_int()Basavaraj Natikar
Current amd_sfh driver has float_to_int() to convert units from float to int. This is fine until this function gets called outside of the current scope of file. Add a prefix "amd_sfh" to float_to_int() so that function represents the driver name. This function will be called by multiple callers in the next patch. Link: https://lore.kernel.org/all/ad064333-48a4-4cfa-9428-69e8a7c44667@redhat.com/ Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-01-02HID: i2c-hid: elan: Add ili2901 timingZhengqiao Xia
ILI2901 requires reset to pull down time greater than 10ms, so the configuration post_power_delay_ms is 10, and the chipset initial time is required to be greater than 100ms, so the post_gpio_reset_on_delay_ms is set to 100. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-01-02HID: make ishtp_cl_bus_type constGreg Kroah-Hartman
Now that the driver core can properly handle constant struct bus_type, move the ishtp_cl_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: linux-input@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-01-02HID: make hid_bus_type constGreg Kroah-Hartman
Now that the driver core can properly handle constant struct bus_type, move the hid_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: linux-input@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-01-02HID: hid-steam: Add gamepad-only mode switched to by holding optionsVicki Pfau
This commit adds a hotkey to switch between "gamepad" mode (mouse and keyboard disabled) and "desktop" mode (gamepad disabled) by holding down the options button (mapped here as the start button). This mirrors the behavior of the official Steam client. This also adds and uses a function for generating haptic pulses, as Steam also does when engaging this hotkey. Signed-off-by: Vicki Pfau <vi@endrift.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-01-02HID: hid-steam: Better handling of serial number lengthVicki Pfau
The second byte of the GET_STRING_ATTRIB report is a length, so we should set the size of the buffer to be the size we're actually requesting, and only reject the reply if the length out is nonsensical. Signed-off-by: Vicki Pfau <vi@endrift.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-01-02HID: hid-steam: Update list of identifiers from SDLVicki Pfau
SDL includes a list of settings (formerly called registers in this driver), reports (formerly cmds), and various other identifiers that were provided by Valve. This commit imports a significant chunk of that list as well as replacing most of the guessed names and a handful of magic constants. It also replaces bitmask definitions that used hex with the BIT macro. Signed-off-by: Vicki Pfau <vi@endrift.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-01-02HID: hid-steam: Make client_opened a counterVicki Pfau
The client_opened variable was used to track if the hidraw was opened by any clients to silence keyboard/mouse events while opened. However, there was no counting of how many clients were opened, so opening two at the same time and then closing one would fool the driver into thinking it had no remaining opened clients. Signed-off-by: Vicki Pfau <vi@endrift.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-01-02HID: hid-steam: Clean up lockingVicki Pfau
This cleans up the locking logic so that the spinlock is consistently used for access to a small handful of struct variables, and the mutex is exclusively and consistently used for ensuring that mutliple threads aren't trying to send/receive reports at the same time. Previously, only some report transactions were guarded by this mutex, potentially breaking atomicity. The mutex has been renamed to reflect this usage. Signed-off-by: Vicki Pfau <vi@endrift.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-01-02HID: hid-steam: Disable watchdog instead of using a heartbeatVicki Pfau
The Steam Deck has a setting that controls whether or not the watchdog is enabled, so instead of using a heartbeat to keep the watchdog from triggering, this commit changes the behavior to simply disable the watchdog instead. Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-01-02HID: hid-steam: Avoid overwriting smoothing parameterVicki Pfau
The original implementation of this driver incorrectly guessed the function of this register. It's not only unnecessary to write to this register for lizard mode but actually counter-productive since it overwrites whatever previous value was intentionally set, for example by Steam. Signed-off-by: Vicki Pfau <vi@endrift.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2023-12-27HID: magicmouse: fix kerneldoc for struct magicmouse_scJiri Kosina
Description for hdev, work and battery_timer of struct magicmouse_sc were missing. Fix that. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312261056.AmFPDIL5-lkp@intel.com/ Signed-off-by: Jiri Kosina <jkosina@suse.com>
2023-12-22HID: sensor-hub: Enable hid core report processing for all devicesYauhen Kharuzhy
After the commit 666cf30a589a ("HID: sensor-hub: Allow multi-function sensor devices") hub devices are claimed by hidraw driver in hid_connect(). This causes stoppping of processing HID reports by hid core due to optimization. In such case, the hid-sensor-custom driver cannot match a known custom sensor in hid_sensor_custom_get_known() because it try to check custom properties which weren't filled from the report because hid core didn't parsed it. As result, custom sensors like hinge angle sensor and LISS sensors don't work. Mark the sensor hub devices claimed by some driver to avoid hidraw-related optimizations. Fixes: 666cf30a589a ("HID: sensor-hub: Allow multi-function sensor devices") Cc: stable@vger.kernel.org Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20231219231503.1506801-1-jekhor@gmail.com Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2023-12-20HID: wacom: Correct behavior when processing some confidence == false touchesJason Gerecke
There appear to be a few different ways that Wacom devices can deal with confidence: 1. If the device looses confidence in a touch, it will first clear the tipswitch flag in one report, and then clear the confidence flag in a second report. This behavior is used by e.g. DTH-2452. 2. If the device looses confidence in a touch, it will clear both the tipswitch and confidence flags within the same report. This behavior is used by some AES devices. 3. If the device looses confidence in a touch, it will clear *only* the confidence bit. The tipswitch bit will remain set so long as the touch is tracked. This behavior may be used in future devices. The driver does not currently handle situation 3 properly. Touches that loose confidence will remain "in prox" and essentially frozen in place until the tipswitch bit is finally cleared. Not only does this result in userspace seeing a stuck touch, but it also prevents pen arbitration from working properly (the pen won't send events until all touches are up, but we don't currently process events from non-confident touches). This commit centralizes the checking of the confidence bit in the wacom_wac_finger_slot() function and has 'prox' depend on it. In the case where situation 3 is encountered, the treat the touch as though it was removed, allowing both userspace and the pen arbitration to act normally. Signed-off-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com> Signed-off-by: Ping Cheng <ping.cheng@wacom.com> Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Fixes: 7fb0413baa7f ("HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts") Cc: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.com>
2023-12-18Merge tag 'hid-for-linus-2023121901' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - fix for division by zero in Nintendo driver when generic joycon is attached, reported and fixed by SteamOS folks (Guilherme G. Piccoli) - GCC-7 build fix (which is a good cleanup anyway) for Nintendo driver (Ryan McClelland) * tag 'hid-for-linus-2023121901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: nintendo: Prevent divide-by-zero on code HID: nintendo: fix initializer element is not constant error
2023-12-18HID: nintendo: Prevent divide-by-zero on codeGuilherme G. Piccoli
It was reported [0] that adding a generic joycon to the system caused a kernel crash on Steam Deck, with the below panic spew: divide error: 0000 [#1] PREEMPT SMP NOPTI [...] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0119 10/24/2023 RIP: 0010:nintendo_hid_event+0x340/0xcc1 [hid_nintendo] [...] Call Trace: [...] ? exc_divide_error+0x38/0x50 ? nintendo_hid_event+0x340/0xcc1 [hid_nintendo] ? asm_exc_divide_error+0x1a/0x20 ? nintendo_hid_event+0x307/0xcc1 [hid_nintendo] hid_input_report+0x143/0x160 hidp_session_run+0x1ce/0x700 [hidp] Since it's a divide-by-0 error, by tracking the code for potential denominator issues, we've spotted 2 places in which this could happen; so let's guard against the possibility and log in the kernel if the condition happens. This is specially useful since some data that fills some denominators are read from the joycon HW in some cases, increasing the potential for flaws. [0] https://github.com/ValveSoftware/SteamOS/issues/1070 Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Tested-by: Sam Lantinga <slouken@libsdl.org> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2023-12-18HID: nintendo: fix initializer element is not constant errorRyan McClelland
With gcc-7 builds, an error happens with the controller button values being defined as const. Change to a define. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312141227.C2h1IzfI-lkp@intel.com/ Signed-off-by: Ryan McClelland <rymcclel@gmail.com> Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2023-12-12Merge tag 'hid-for-linus-2023121201' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - Lenovo ThinkPad TrackPoint Keyboard II firmware-specific regression fix (Mikhail Khvainitski) - device-specific fixes (various authors) * tag 'hid-for-linus-2023121201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: apple: Add "hfd.cn" and "WKB603" to the list of non-apple keyboards HID: lenovo: Restrict detection of patched firmware only to USB cptkbd HID: Add quirk for Labtec/ODDOR/aikeec handbrake HID: i2c-hid: Add IDEA5002 to i2c_hid_acpi_blacklist[] mailmap: add address mapping for Jiri Kosina
2023-12-12HID: nintendo: add support for nso controllersRyan McClelland
This adds support for the nintendo switch online controllers which include the SNES, Genesis, and N64 Controllers. As each nso controller only implements a subset of what a pro controller can do. Each of these 'features' were broken up in to seperate functions which include right stick, left stick, imu, and dpad and depending on the controller type that it is, it will call the supported functions appropriately. Each controller now has a struct which maps the bit within the hid in report to a button. The name given to the device now comes directly from the hid device name rather than looking up a predefined string. Signed-off-by: Ryan McClelland <rymcclel@gmail.com> Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com> Tested-by: Daniel J. Ogorchock <djogorchock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 00:19:15 +0000