| Age | Commit message (Collapse) | Author |
|---|
|
|
|
of_get_required_opp_performance_state() returns 0 on errors currently
and a positive performance state otherwise. Since 0 is a valid
performance state (representing off), it would be better if this routine
returns negative values on error.
That will also make it behave similar to
dev_pm_opp_xlate_performance_state(), which also returns performance
states and returns negative values on error. Change the return type of
the function to "int" in order to return negative values.
This doesn't have any users for now and so no other part of the kernel
will be impacted with this change.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
dev_pm_genpd_set_performance_state() needs to handle performance state
propagation going forward. Currently this routine only gets the required
performance state of the device's genpd as an argument, but it doesn't
know how to translate that to master genpd(s) of the device's genpd.
Introduce a new helper dev_pm_opp_xlate_performance_state() which will
be used to translate from performance state of a device (or genpd
sub-domain) to another device (or master genpd).
Normally the src_table (of genpd sub-domain) will have the
"required_opps" property set to point to one of the OPPs in the
dst_table (of master genpd), but in some cases the genpd and its master
have one to one mapping of performance states and so none of them have
the "required-opps" property set. Return the performance state of the
src_table as it is in such cases.
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Make _find_table_of_opp_np() more efficient by using of_get_parent() to
find the parent OPP table node.
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
There is one case where we may end up with no "supply" directory for the
OPPs in debugfs. That happens when the OPP core isn't managing the
regulators for the device and the device's OPP do have microvolt
property. It happens because the opp_table->regulator_count remains set
to 0 and the debugfs routines don't add any supply directory in such a
case.
This commit fixes that by setting opp_table->regulator_count to 1 in
that particular case. But to make everything work nicely and not break
other parts of the core, regulator_count is defined as "int" now instead
of "unsigned int" and it can have different special values now. It is
set to -1 initially to mark it "uninitialized" and later only we set it
to 0 or positive values after checking how many supplies are there.
This also helps in finding the bugs where only few of the OPPs have the
"opp-microvolt" property set and not all.
Fixes: 1fae788ed640 ("PM / OPP: Don't create debugfs "supply-0" directory unnecessarily")
Reported-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The value of opp_table->regulator_count is not very consistent right now
and it may end up being 0 while we do have a "opp-microvolt" property in
the OPP table. It was kept that way as we used to check if any
regulators are set with the OPP core for a device or not using value of
regulator_count.
Lets use opp_table->regulators for that purpose as the meaning of
regulator_count is going to change in the later patches.
Reported-by: Quentin Perret <quentin.perret@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
We currently return error if more than one phandle is present in the
"operating-points-v2" property, which is incorrect. We only want to
check the count of phandles here and set index to 0 if only one phandle
is present.
Fix it.
Fixes: 5ed4cecd75e9 ("OPP: Pass OPP table to _of_add_opp_table_v{1|2}()")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
_get_optimal_vdd_voltage call provides new_supply_vbb->u_volt
as the reference voltage while it should be really new_supply_vdd->u_volt.
Cc: 4.16+ <stable@vger.kernel.org> # v4.16+
Fixes: 9a835fa6e47 ("PM / OPP: Add ti-opp-supply driver")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The voltage range (min, max) provided in the device tree is from
the data manual and is pretty big, catering to a wide range of devices.
On a i2c read/write failure the regulator_set_voltage_triplet function
falls back to set voltage between min and max. The min value from Device
Tree can be lesser than the optimal value and in that case that can lead
to a hang or crash. Hence set the u_volt_min dynamically to the optimal
voltage value.
Cc: 4.16+ <stable@vger.kernel.org> # v4.16+
Fixes: 9a835fa6e47 ("PM / OPP: Add ti-opp-supply driver")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
This isn't used anymore, remove it.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The OPP core already has the performance state values for each of the
genpd's OPPs and there is no need to call the genpd callback again to
get the performance state for the case where the end device doesn't have
an OPP table and has the "required-opps" property directly in its node.
This commit renames of_genpd_opp_to_performance_state() as
of_get_required_opp_performance_state() and moves it to the OPP core, as
it is all about OPP stuff now.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Now that all the infrastructure is in place to support multiple required
OPPs, lets switch over to using it.
A new internal routine _set_required_opps() takes care of updating
performance state for all the required OPPs. With this the performance
state updates are supported even when the end device needs to configure
regulators as well, that wasn't the case earlier.
The pstates were earlier stored in the end device's OPP structures, that
also changes now as those values are stored in the genpd's OPP
structures. And so we switch over to using
pm_genpd_opp_to_performance_state() instead of
of_genpd_opp_to_performance_state() to get performance state for the
genpd OPPs.
The routine _generic_set_opp_domain() is not required anymore and is
removed.
On errors we don't try to recover by reverting to old settings as things
are really complex now and the calls here should never really fail
unless there is a bug. There is no point increasing the complexity, for
code which will never be executed.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Multiple generic power domains for a consumer device are supported with
the help of virtual devices, which are created for each consumer device
- genpd pair. These are the device structures which are attached to the
power domain and are required by the OPP core to set the performance
state of the genpd.
The helpers added by this commit are required to be called once for each
of these virtual devices. These are required only if multiple domains
are available for a device, otherwise the actual device structure will
be used instead by the OPP core.
The new helpers also support the complex cases where the consumer device
wouldn't always require all the domains. For example, a camera may
require only one power domain during normal operations but two during
high resolution operations. The consumer driver can call
dev_pm_opp_put_genpd_virt_dev(high_resolution_genpd_virt_dev) if it is
currently operating in the normal mode and doesn't have any performance
requirements from the genpd which manages high resolution power
requirements. The consumer driver can later call
dev_pm_opp_set_genpd_virt_dev(high_resolution_genpd_virt_dev) once it
switches back to the high resolution mode.
The new helpers differ from other OPP set/put helpers as the new ones
can be called with OPPs initialized for the table as we may need to call
them on the fly because of the complex case explained above. For this
reason it is possible that the genpd virt_dev structure may be used in
parallel while the new helpers are running and a new mutex is added to
protect against that. We didn't use the existing opp_table->lock mutex
as that is widely used in the OPP core and we will need this lock in the
dev_pm_opp_set_rate() helper while changing OPP and we need to make sure
there is not much contention while doing that as that's the hotpath.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
An earlier commit populated the OPP tables from the "required-opps"
property, this commit populates the individual OPPs. This is repeated
for each OPP in the OPP table and these populated OPPs will be used by
later commits.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The current implementation works only for the case where a single
phandle is present in the "required-opps" property, while DT allows
multiple phandles to be present there.
This patch adds new infrastructure to parse all the phandles present in
"required-opps" property and save pointers of the required OPP's OPP
tables. These will be used by later commits.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Create a separate routine to take care of custom set_opp() handler
specific stuff.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
We need to handle genpd OPP tables differently, this is already the case
at one location and will be extended going forward. Add another field to
the OPP table to check if the table belongs to a genpd or not.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Currently the _of_add_opp_table_v2 call loops through the OPP nodes in
the operating-points-v2 table in the device tree and calls
_opp_add_static_v2 for each to add them to the table. It counts each
iteration through this loop as an added OPP, however there are cases
where _opp_add_static_v2() returns 0 but no new OPP is added to the
list.
This can happen while adding duplicate OPP or if the OPP isn't supported
by hardware.
Because of this the count variable will contain the number of OPP nodes
in the table in device tree but not necessarily the ones that are
actually added.
As this count value is what is checked to determine if there are any
valid OPPs, if a platform has an operating-points-v2 table with all OPP
nodes containing opp-supported-hw values that are not currently
supported, then _of_add_opp_table_v2 will fail to abort as it should due
to an empty table.
Additionally, since commit 3ba98324e81a ("PM / OPP: Get
performance state using genpd helper"), the same count variable is
compared against the number of OPPs containing performance states and
requires that either all or none have pstates set, however in the case
of any opp table that has any entries that do not get added by
_opp_add_static_v2 due to incompatible opp-supported-hw fields, these
numbers will not match and _of_add_opp_table_v2 will incorrectly fail.
We need to clearly identify all the three cases (success, failure,
unsupported/duplicate OPPs) and then increment count only on success
case. Change return type of _opp_add_static_v2() to return the pointer
to the newly added OPP instead of an integer. This routine now returns a
valid pointer if the OPP is really added, NULL for unsupported or
duplicate OPPs, and error value cased as a pointer on errors.
Ideally the fixes tag in this commit should point back to the commit
that introduced OPP v2 initially, as that's where we started incorrectly
accounting for duplicate OPPs:
commit 274659029c9d ("PM / OPP: Add support to parse "operating-points-v2" bindings")
But it wasn't a real problem until recently as the count was only used
to check if any OPPs are added or not. And so this commit points to a
rather recent commit where we added more code that depends on the value
of "count".
Fixes: 3ba98324e81a ("PM / OPP: Get performance state using genpd helper")
Reported-by: Dave Gerlach <d-gerlach@ti.com>
Reported-by: Niklas Cassel <niklas.cassel@linaro.org>
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Return error number instead of 0 on failures.
Fixes: a1e8c13600bf ("PM / OPP: "opp-hz" is optional for power domains")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The error handling wasn't appropriate in
dev_pm_opp_of_cpumask_add_table(). For example it returns 0 on success
and also for the case where cpumask is empty or cpu_device wasn't found
for any of the CPUs.
It should really return error on such cases, so that the callers can be
aware of the outcome.
Fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Both _of_add_opp_table_v1() and _of_add_opp_table_v2() contain similar
code to get the OPP table and their parent routine also parses the DT to
find the OPP table's node pointer. This can be simplified by getting the
OPP table in advance and then passing it as argument to these routines.
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
When two or more devices are sharing their clock and voltage rails, they
share the same OPP table. But there are some corner cases where the OPP
core incorrectly creates separate OPP tables for them.
For example, CPU 0 and 1 share clock/voltage rails. The platform
specific code calls dev_pm_opp_set_regulators() for CPU0 and the OPP
core creates an OPP table for it (the individual OPPs aren't initialized
as of now). The same is repeated for CPU1 then. Because
_opp_get_opp_table() doesn't compare DT node pointers currently, it
fails to find the link between CPU0 and CPU1 and so creates a new OPP
table.
Fix this by calling _managed_opp() from _opp_get_opp_table().
_managed_opp() gain an additional argument (index) to get the right node
pointer. This resulted in simplifying code in _of_add_opp_table_v2() as
well.
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Currently there are two separate ways to free the OPP table based on how
it is created in the first place.
We call _dev_pm_opp_remove_table() to free the static and/or dynamic
OPP, OPP list devices, etc. This is done for the case where the OPP
table is added while initializing the OPPs, like via the path
dev_pm_opp_of_add_table().
We also call dev_pm_opp_put_opp_table() in some cases which eventually
frees the OPP table structure once the reference count reaches 0. This
is used by the first case as well as other cases like
dev_pm_opp_set_regulators() where the OPPs aren't necessarily
initialized at this point.
This whole thing is a bit unclear and messy and obstruct any further
cleanup/fixup of OPP core.
This patch tries to streamline this by keeping a single path for OPP
table destruction, i.e. dev_pm_opp_put_opp_table().
All the cleanup happens in _opp_table_kref_release() now after the
reference count reaches 0. _dev_pm_opp_remove_table() is removed as it
isn't required anymore.
We don't drop the reference to the OPP table after creating it from
_of_add_opp_table_v{1|2}() anymore and the same is dropped only when we
try to remove them.
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Only one platform was depending on this feature and it is already
updated now. Stop removing dynamic OPPs from _dev_pm_opp_remove_table().
This simplifies lot of paths and removes unnecessary parameters.
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The static OPPs don't always get freed with the OPP table, it can happen
before that as well. For example, if the OPP table is first created
using helpers like dev_pm_opp_set_supported_hw() and the OPPs are
created at a later point. Now when the OPPs are removed, the OPP table
stays until the time dev_pm_opp_put_supported_hw() is called.
Later patches will streamline the freeing of OPP table and that requires
the static OPPs to get freed with help of a separate kernel reference.
This patch prepares for that by creating a separate kref for static OPPs
list.
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The reference count is only required to be incremented for every call
that may lead to adding the OPP table. For static OPPs the same should
be done from the parent routine which adds all static OPPs together and
so only one refcount for all static OPPs.
Update code to reflect that.
The refcount is incremented every time a dynamic OPP is created (as that
can lead to creating the OPP table) and the same is dropped when the OPP
is removed.
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Parse the DT properties present in the OPP table from
_of_init_opp_table(), which is a dedicated routine for DT parsing.
Minor relocation of helpers is required for this.
It is possible now for _managed_opp() to return a partially initialized
OPP table if the OPP table is created via the helpers like
dev_pm_opp_set_supported_hw() and we need another flag to indicate if
the static OPP are already parsed or not to make sure we don't
incorrectly skip initializing the static OPPs.
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
This is a preparatory patch required for the next commit which will
start using OPP table's node pointer in _of_init_opp_table(), which
requires the index in order to read the OPP table's phandle.
This commit adds the index argument in the call chains in order to get
it delivered to _of_init_opp_table().
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The dev_list needs to be protected with a lock, else we may have
simultaneous access (addition/removal) to it and that would be racy.
Extend scope of the opp_table lock to protect dev_list as well.
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
dev_pm_opp_of_cpumask_add_table() creates the OPP table for all CPUs
present in the cpumask and on errors it should revert all changes it has
done.
It actually is doing a bit more than that. On errors, it tries to free
all the OPP tables, even the one it hasn't created yet. This may also
end up freeing the OPP tables which were created from separate path,
like dev_pm_opp_set_supported_hw().
Reported-and-tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The OPP table was freed, but not the individual OPPs which is done from
_dev_pm_opp_remove_table(). Fix it by calling _dev_pm_opp_remove_table()
as well.
Cc: 4.18 <stable@vger.kernel.org> # v4.18
Fixes: 3ba98324e81a ("PM / OPP: Get performance state using genpd helper")
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
This commit fixes a rare but possible case when the clk rate is updated
without update of the regulator voltage.
At boot up, CPUfreq checks if the system is running at the right freq. This
is a sanity check in case a bootloader set clk rate that is outside of freq
table present with cpufreq core. In such cases system can be unstable so
better to change it to a freq that is preset in freq-table.
The CPUfreq takes next freq that is >= policy->cur and this is our
target_freq that needs to be set now.
dev_pm_opp_set_rate(dev, target_freq) checks the target_freq and the
old_freq (a current rate). If these are equal it returns early. If not,
it searches for OPP (old_opp) that fits best to old_freq (not listed in
the table) and updates old_freq (!).
Here, we can end up with old_freq = old_opp.rate = target_freq, which
is not handled in _generic_set_opp_regulator(). It's supposed to update
voltage only when freq > old_freq || freq > old_freq.
if (freq > old_freq) {
ret = _set_opp_voltage(dev, reg, new_supply);
[...]
if (freq < old_freq) {
ret = _set_opp_voltage(dev, reg, new_supply);
if (ret)
It results in, no voltage update while clk rate is updated.
Example:
freq-table = {
1000MHz 1.15V
666MHZ 1.10V
333MHz 1.05V
}
boot-up-freq = 800MHz # not listed in freq-table
freq = target_freq = 1GHz
old_freq = 800Mhz
old_opp = _find_freq_ceil(opp_table, &old_freq); #(old_freq is modified!)
old_freq = 1GHz
Fixes: 6a0712f6f199 ("PM / OPP: Add dev_pm_opp_set_rate()")
Cc: 4.6+ <stable@vger.kernel.org> # v4.6+
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:
kzalloc(a * b, gfp)
with:
kcalloc(a * b, gfp)
as well as handling cases of:
kzalloc(a * b * c, gfp)
with:
kzalloc(array3_size(a, b, c), gfp)
as it's slightly less ugly than:
kzalloc_array(array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
kzalloc(4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@
(
kzalloc(
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
kzalloc(
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@
(
kzalloc(
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(char) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@
- kzalloc
+ kcalloc
(
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
kzalloc(
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
kzalloc(
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc(
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@
(
kzalloc(
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
kzalloc(C1 * C2 * C3, ...)
|
kzalloc(
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
kzalloc(sizeof(THING) * C2, ...)
|
kzalloc(sizeof(TYPE) * C2, ...)
|
kzalloc(C1 * C2 * C3, ...)
|
kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- (E1) * E2
+ E1, E2
, ...)
|
- kzalloc
+ kcalloc
(
- (E1) * (E2)
+ E1, E2
, ...)
|
- kzalloc
+ kcalloc
(
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The OPP binding says:
Property: operating-points-v2
...
This can contain more than one phandle for power domain
providers that provide multiple power domains. That is, one
phandle for each power domain. If only one phandle is available,
then the same OPP table will be used for all power domains
provided by the power domain provider.
But the OPP core isn't allowing the same OPP table to be used for
multiple domains. Update dev_pm_opp_of_add_table_indexed() to allow
that.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
|
|
It should be fine to call dev_pm_opp_register_set_opp_helper() for all
possible CPUs, even if some of them share the OPP table as the caller
may not be aware of sharing policy.
Lets increment the reference count of the OPP table and return its
pointer. The caller need to call dev_pm_opp_register_put_opp_helper()
the same number of times later on to drop all the references.
To avoid adding another counter to count how many times
dev_pm_opp_register_set_opp_helper() is called for the same OPP table,
dev_pm_opp_register_put_opp_helper() frees the resources on the very
first call made to it, assuming that the caller would be calling it
sequentially for all the CPUs. We can revisit that if that assumption is
broken in the future.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
It should be fine to call dev_pm_opp_set_regulators() for all possible
CPUs, even if some of them share the OPP table as the caller may not be
aware of sharing policy.
Lets increment the reference count of the OPP table and return its
pointer. The caller need to call dev_pm_opp_put_regulators() the same
number of times later on to drop all the references.
To avoid adding another counter to count how many times
dev_pm_opp_set_regulators() is called for the same OPP table,
dev_pm_opp_put_regulators() frees the resources on the very first call
made to it, assuming that the caller would be calling it sequentially
for all the CPUs. We can revisit that if that assumption is broken in
the future.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
It should be fine to call dev_pm_opp_set_prop_name() for all possible
CPUs, even if some of them share the OPP table as the caller may not be
aware of sharing policy.
Lets increment the reference count of the OPP table and return its
pointer. The caller need to call dev_pm_opp_put_prop_name() the same
number of times later on to drop all the references.
To avoid adding another counter to count how many times
dev_pm_opp_set_prop_name() is called for the same OPP table,
dev_pm_opp_put_prop_name() frees the resources on the very first call
made to it, assuming that the caller would be calling it sequentially
for all the CPUs. We can revisit that if that assumption is broken in
the future.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
It should be fine to call dev_pm_opp_set_supported_hw() for all possible
CPUs, even if some of them share the OPP table as the caller may not be
aware of sharing policy.
Lets increment the reference count of the OPP table and return its
pointer. The caller need to call dev_pm_opp_put_supported_hw() the same
number of times later on to drop all the references.
To avoid adding another counter to count how many times
dev_pm_opp_set_supported_hw() is called for the same OPP table,
dev_pm_opp_put_supported_hw() frees the resources on the very first call
made to it, assuming that the caller would be calling it sequentially
for all the CPUs. We can revisit that if that assumption is broken in
the future.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Smatch complains that it's possible we print "rate" in the debug output
when it hasn't been initialized. It should be zero on that path.
Fixes: a1e8c13600bf ("PM / OPP: "opp-hz" is optional for power domains")
[ Viresh: Added the Fixes tag ]
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
These helpers aren't used anymore, remove them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The genpd core provides an API now to retrieve the performance state
from DT, use that instead of the ->get_pstate() callback.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This adds a new helper to let the power domain drivers to access
opp->np, so that they can read platform specific properties from the
node.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
A device's DT node or its OPP nodes can contain a phandle to other
device's OPP node, in the "required-opps" property.
This patch implements a routine to find that required OPP from the node
that contains the "required-opps" property.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The "operating-points-v2" property can contain a list of phandles now,
specifically for the power domain providers that provide multiple
domains.
Add support to parse that.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
"opp-hz" property is optional for power domains now and we shouldn't
error out if it is missing for power domains.
This patch creates two new routines, _get_opp_count() and
_opp_is_duplicate(), by separating existing code from their parent
functions. Also skip duplicate OPP check for power domain OPPs as they
may not have any the "opp-hz" field, but a platform specific performance
state binding to uniquely identify OPP nodes.
By default the debugfs OPP nodes are named using the "rate" value, but
that isn't possible for the power domain OPP nodes and hence they use
the index of the OPP node in the OPP node list instead.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
After checking all possible call chains to
dev_pm_opp_init_cpufreq_table() here,
my tool finds that this function is never called in atomic context,
namely never in an interrupt handler or holding a spinlock.
And dev_pm_opp_init_cpufreq_table() calls dev_pm_opp_get_opp_count(),
which calls mutex_lock that can sleep.
It indicates that atmtcp_v_send() can call functions which may sleep.
Thus GFP_ATOMIC is not necessary, and it can be replaced with GFP_KERNEL.
This is found by a static analysis tool named DCNS written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Fixes the following sparse warning:
drivers/opp/ti-opp-supply.c:276:5: warning:
symbol 'ti_opp_supply_set_opp' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Introduce a ti-opp-supply driver that will use new multiple regulator
support that is part of the OPP core This is needed on TI platforms like
DRA7/AM57 in order to control both CPU regulator and Adaptive Body Bias
(ABB) regulator. These regulators must be scaled in sequence during an
OPP transition depending on whether or not the frequency is being scaled
up or down.
This driver also implements AVS Class0 for these parts by looking up the
required values from registers in the SoC and programming adjusted
optimal voltage values for each OPP.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This adds the dev_pm_opp_{un}register_get_pstate_helper() helper
routines which will be used to set the get_pstate() callback for a
device. This callback will be later called internally by the OPP core to
get performance state corresponding to an OPP.
This is required temporarily until the time we have proper DT bindings
to include the performance state information.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
