| Age | Commit message (Collapse) | Author |
|---|
|
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, ibmvfc,
qla2xxx, hisi_sas, pm80xx) plus the removal of the gdth driver (which
is bound to cause conflicts with a trivial change somewhere).
The only big major rework of note is the one from Hannes trying to
clean up our result handling code in the drivers to make it
consistent"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (194 commits)
scsi: MAINTAINERS: Adjust to reflect gdth scsi driver removal
scsi: ufs: Give clk scaling min gear a value
scsi: lpfc: Fix 'physical' typos
scsi: megaraid_mbox: Fix spelling of 'allocated'
scsi: qla2xxx: Simplify the calculation of variables
scsi: message: fusion: Fix 'physical' typos
scsi: target: core: Change ASCQ for residual write
scsi: target: core: Signal WRITE residuals
scsi: target: core: Set residuals for 4Kn devices
scsi: hisi_sas: Add trace FIFO debugfs support
scsi: hisi_sas: Flush workqueue in hisi_sas_v3_remove()
scsi: hisi_sas: Enable debugfs support by default
scsi: hisi_sas: Don't check .nr_hw_queues in hisi_sas_task_prep()
scsi: hisi_sas: Remove deferred probe check in hisi_sas_v2_probe()
scsi: lpfc: Add auto select on IRQ_POLL
scsi: ncr53c8xx: Fix typos
scsi: lpfc: Fix ancient double free
scsi: qla2xxx: Fix some memory corruption
scsi: qla2xxx: Remove redundant NULL check
scsi: megaraid: Fix ifnullfree.cocci warnings
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add support for eMMC inline encryption
- Add a helper function to parse DT properties for clock phases
- Some improvements and cleanups for the mmc_test module
MMC host:
- android-goldfish: Remove driver
- cqhci: Add support for eMMC inline encryption
- dw_mmc-zx: Remove driver
- meson-gx: Extend support for scatter-gather to allow SD_IO_RW_EXTENDED
- mmci: Add support for probing bus voltage level translator
- mtk-sd: Address race condition for request timeouts
- sdhci_am654: Add Support for the variant on TI's AM64 SoC
- sdhci-esdhc-imx: Prevent kernel panic at ->remove()
- sdhci-iproc: Add ACPI bindings for the RPi to enable SD and WiFi on RPi4
- sdhci-msm: Add Inline Crypto Engine support
- sdhci-msm: Use actual_clock to improve timeout calculations
- sdhci-of-aspeed: Add Andrew Jeffery as maintainer
- sdhci-of-aspeed: Extend clock support for the AST2600 variant
- sdhci-pci-gli: Increase idle period for low power state for GL9763E
- sdhci-pci-o2micro: Make tuning for SDR104 HW more robust
- sdhci-sirf: Remove driver
- sdhci-xenon: Add support for the AP807 variant
- sunxi-mmc: Add support for the A100 variant
- sunxi-mmc: Ensure host is suspended during system sleep
- tmio: Add detection of data timeout errors
- tmio/renesas_sdhi: Extend support for retuning
- renesas_sdhi_internal_dmac: Add support for the ->pre|post_req() ops"
* tag 'mmc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits)
mmc: sdhci-esdhc-imx: fix kernel panic when remove module
mmc: host: Retire MMC_GOLDFISH
mmc: cb710: Use new tasklet API
mmc: sdhci-pci-o2micro: Bug fix for SDR104 HW tuning failure
mmc: mmc_test: use erase_arg for mmc_erase command
mmc: wbsd: Use new tasklet API
mmc: via-sdmmc: Use new tasklet API
mmc: uniphier-sd: Use new tasklet API
mmc: tifm_sd: Use new tasklet API
mmc: s3cmci: Use new tasklet API
mmc: omap: Use new tasklet API
mmc: dw_mmc: Use new tasklet API
mmc: au1xmmc: Use new tasklet API
mmc: atmel-mci: Use new tasklet API
mmc: cavium: Replace spin_lock_irqsave with spin_lock in hard IRQ
mmc: queue: Remove unused define
mmc: core: Drop redundant bouncesz from struct mmc_card
mmc: core: Drop redundant member in struct mmc host
mmc: core: Use host instead of card argument to mmc_spi_send_csd()
mmc: core: Exclude unnecessary header file
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"A relatively calm release at this time, and no massive code changes
are found in the stats, while a wide range of code refactoring and
cleanup have been done.
Note that this update includes the tree-wide trivial changes for
dropping the return value from ISA remove callbacks, too.
Below lists up some highlight:
ALSA Core:
- Support for the software jack injection via debugfs
- Fixes for sync_stop PCM operations
HD-audio and USB-audio:
- A few usual HD-audio device quirks
- Updates for Tegra HD-audio
- More quirks for Pioneer and other USB-audio devices
- Stricter state checks at USB-audio disconnection
ASoC:
- Continued code refactoring, cleanup and fixes in ASoC core API
- A KUnit testsuite for the topology code
- Lots of ASoC Intel driver Realtek codec updates, quirk additions
and fixes
- Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured
nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro
- Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers
Others:
- Drop return value from ISA driver remove callback
- Cleanup with DIV_ROUND_UP() macro
- FireWire updates, HDSP output loopback support"
* tag 'sound-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (322 commits)
ALSA: hda: intel-dsp-config: add Alder Lake support
ASoC: soc-pcm: fix hw param limits calculation for multi-DAI
ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet
ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet
ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet
ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet
ASoC: soc-pcm: fix hwparams min/max init for dpcm
ALSA: hda/realtek: Quirk for HP Spectre x360 14 amp setup
ALSA: usb-audio: Add implicit fb quirk for BOSS GP-10
ALSA: hda: Add another CometLake-H PCI ID
ASoC: soc-pcm: add soc_pcm_hw_update_format()
ASoC: soc-pcm: add soc_pcm_hw_update_chan()
ASoC: soc-pcm: add soc_pcm_hw_update_rate()
ASoC: wm_adsp: Remove unused control callback structure
ASoC: SOF: relax ABI checks and avoid unnecessary warnings
ASoC: codecs: lpass-tx-macro: add dapm widgets and route
ASoC: codecs: lpass-tx-macro: add support for lpass tx macro
ASoC: qcom: dt-bindings: add bindings for lpass tx macro codec
ASoC: codecs: lpass-rx-macro: add iir widgets
ASoC: codecs: lpass-rx-macro: add dapm widgets and route
...
|
|
Pull core block updates from Jens Axboe:
"Another nice round of removing more code than what is added, mostly
due to Christoph's relentless pursuit of tech debt removal/cleanups.
This pull request contains:
- Two series of BFQ improvements (Paolo, Jan, Jia)
- Block iov_iter improvements (Pavel)
- bsg error path fix (Pan)
- blk-mq scheduler improvements (Jan)
- -EBUSY discard fix (Jan)
- bvec allocation improvements (Ming, Christoph)
- bio allocation and init improvements (Christoph)
- Store bdev pointer in bio instead of gendisk + partno (Christoph)
- Block trace point cleanups (Christoph)
- hard read-only vs read-only split (Christoph)
- Block based swap cleanups (Christoph)
- Zoned write granularity support (Damien)
- Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)"
* tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits)
mm: simplify swapdev_block
sd_zbc: clear zone resources for non-zoned case
block: introduce blk_queue_clear_zone_settings()
zonefs: use zone write granularity as block size
block: introduce zone_write_granularity limit
block: use blk_queue_set_zoned in add_partition()
nullb: use blk_queue_set_zoned() to setup zoned devices
nvme: cleanup zone information initialization
block: document zone_append_max_bytes attribute
block: use bi_max_vecs to find the bvec pool
md/raid10: remove dead code in reshape_request
block: mark the bio as cloned in bio_iov_bvec_set
block: set BIO_NO_PAGE_REF in bio_iov_bvec_set
block: remove a layer of indentation in bio_iov_iter_get_pages
block: turn the nr_iovecs argument to bio_alloc* into an unsigned short
block: remove the 1 and 4 vec bvec_slabs entries
block: streamline bvec_alloc
block: factor out a bvec_alloc_gfp helper
block: move struct biovec_slab to bio.c
block: reuse BIO_INLINE_VECS for integrity bvecs
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.12
Another quiet release in terms of features, though several of the
drivers got quite a bit of work and there were a lot of general changes
resulting from Morimoto-san's ongoing cleanup work.
- As ever, lots of hard work by Morimoto-san cleaning up the code and
making it more consistent.
- Many improvements in the Intel drivers including a wide range of
quirks and bug fixes.
- A KUnit testsuite for the topology code.
- Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured
nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro
- Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers.
|
|
For host-aware ZBC disk, setting the device zoned model to BLK_ZONED_HA
using blk_queue_set_zoned() in sd_read_block_characteristics() may
result in the block device effective zoned model to be "none"
(BLK_ZONED_NONE) if partitions are present on the device. In this case,
sd_zbc_read_zones() should not setup the zone related queue limits for
the disk so that the device limits and configuration is consistent with
a regular disk and resources not uselessly allocated (e.g. the zone
write pointer tracking array for zone append emulation).
Furthermore, if the disk zoned model changes at run time due to the
creation of a partition by the user, the zone related resources can be
released.
Fix both problems by introducing the function sd_zbc_clear_zone_info()
to reset the scsi disk zone information and free resources and by
returning early in sd_zbc_read_zones() for a block device that has a
zoned model equal to BLK_ZONED_NONE.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@edc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Per ZBC and ZAC specifications, host-managed SMR hard-disks mandate that
all writes into sequential write required zones be aligned to the device
physical block size. However, NVMe ZNS does not have this constraint and
allows write operations into sequential zones to be aligned to the
device logical block size. This inconsistency does not help with
software portability across device types.
To solve this, introduce the zone_write_granularity queue limit to
indicate the alignment constraint, in bytes, of write operations into
zones of a zoned block device. This new limit is exported as a
read-only sysfs queue attribute and the helper
blk_queue_zone_write_granularity() introduced for drivers to set this
limit.
The function blk_queue_set_zoned() is modified to set this new limit to
the device logical block size by default. NVMe ZNS devices as well as
zoned nullb devices use this default value as is. The scsi disk driver
is modified to execute the blk_queue_zone_write_granularity() helper to
set the zone write granularity of host-managed SMR disks to the disk
physical block size.
The accessor functions queue_zone_write_granularity() and
bdev_zone_write_granularity() are also introduced.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@edc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The sdebug_q_arr pointer must be freed when the module is unloaded.
$ cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff888e1cfb0000 (size 4096):
comm "modprobe", pid 165555, jiffies 4325987516 (age 685.194s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000458f4f5d>] 0xffffffffc06702d9
[<000000003edc4b1f>] do_one_initcall+0xe9/0x57d
[<00000000da7d518c>] do_init_module+0x1d1/0x6f0
[<000000009a6a9248>] load_module+0x36bd/0x4f50
[<00000000ddb0c3ce>] __do_sys_init_module+0x1db/0x260
[<000000009532db57>] do_syscall_64+0xa5/0x420
[<000000002916b13d>] entry_SYSCALL_64_after_hwframe+0x6a/0xdf
Fixes: 87c715dcde63 ("scsi: scsi_debug: Add per_host_store option")
Link: https://lore.kernel.org/r/20210208111734.34034-1-mlombard@redhat.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use the new resource-managed variant of blk_ksm_init() so that the UFS
driver doesn't have to manually call blk_ksm_destroy().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Satya Tangirala <satyat@google.com>
Link: https://lore.kernel.org/r/20210121082155.111333-3-ebiggers@kernel.org
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The initialization of clk_scaling.min_gear was removed by mistake. This
change adds it back, otherwise clock scaling down would fail.
Link: https://lore.kernel.org/r/1611802172-37802-1-git-send-email-cang@codeaurora.org
Fixes: 4543d9d78227 ("scsi: ufs: Refactor ufshcd_init/exit_clk_scaling/gating()")
Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In testing, in a configuration with Redfish and native NVMe multipath when
an EEH is injected, a kernel oops is being encountered:
(unreliable)
lpfc_nvme_ls_req+0x328/0x720 [lpfc]
__nvme_fc_send_ls_req.constprop.13+0x1d8/0x3d0 [nvme_fc]
nvme_fc_create_association+0x224/0xd10 [nvme_fc]
nvme_fc_reset_ctrl_work+0x110/0x154 [nvme_fc]
process_one_work+0x304/0x5d
the NBMe transport is issuing a Disconnect LS request, which the driver
receives and tries to post but the work queue used by the driver is already
being torn down by the eeh.
Fix by validating the validity of the work queue before proceeding with the
LS transmit.
Link: https://lore.kernel.org/r/20210127221601.84878-1-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix misspellings of "physical".
Link: https://lore.kernel.org/r/20210126211248.2920028-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
allocted -> allocated
Link: https://lore.kernel.org/r/20210126054908.45468-1-dingsenjie@163.com
Signed-off-by: dingsenjie <dingsenjie@yulong.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix the following coccicheck warnings:
./drivers/scsi/qla2xxx/qla_nvme.c:288:24-26: WARNING !A || A && B is
equivalent to !A || B.
Link: https://lore.kernel.org/r/1611650554-33019-1-git-send-email-abaci-bugfix@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The controller provides trace FIFO DFX tool to assist link fault debugging
and link optimization. This tool can be helpful when debugging link faults
without SAS analyzers. Each PHY has an independent trace FIFO interface.
The user can configure the trace FIFO tool of one PHY by using the
following six interfaces:
signal_sel: select signal group applies to different scenarios.
0x0: linkrate negotiation
0x1: Host 12G TX train
0x2: Disk 12G TX train
0x3: SAS PHY CTRL DFX 0
0x4: SAS PHY CTRL DFX 1
0x5: SAS PCS DFX
other: linkrate negotiation
dump_mask: The masked hardware status bit will not be updated.
dump_mode: determines how to dump data after trigger signal is generated.
0x0: dump forever
0x1: dump 32 data after trigger signal is generated
0x2: no more dump after trigger signal is generated
trigger_mode: determines the trigger mode, level or edge.
0x0: dump when trigger signal changed
0x1: dump when trigger signal's level equal to trigger_level
0x2: dump when trigger signal's level different from trigger_level
trigger_level: determines the trigger level.
trigger_msk: mask trigger signal
The user can get 32-byte values from hardware by reading the rd_data.
These values consitute the status record of the hardware at different time
points.
Link: https://lore.kernel.org/r/1611659068-131975-6-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If the controller reset occurs at the same time as driver removal, it may
be possible that the interrupts have been released prior to the host
softreset, and calling pci_irq_vector() there causes a WARN:
WARNING: CPU: 37 PID: 1542 /pci/msi.c:1275 pci_irq_vector+0xc0/0xd0
Call trace:
pci_irq_vector+0xc0/0xd0
disable_host_v3_hw+0x58/0x5b0 [hisi_sas_v3_hw]
soft_reset_v3_hw+0x40/0xc0 [hisi_sas_v3_hw]
hisi_sas_controller_reset+0x150/0x260 [hisi_sas_main]
hisi_sas_rst_work_handler+0x3c/0x58 [hisi_sas_main]
To fix, flush the driver workqueue prior to releasing the interrupts to
ensure any resets have been completed.
Link: https://lore.kernel.org/r/1611659068-131975-5-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add a config option to enable debugfs support by default. And if debugfs
support is enabled by default, dump count default value is increased to 50
as generally users want something bigger than the current default in that
situation.
Link: https://lore.kernel.org/r/1611659068-131975-4-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Now that v2 and v3 hw expose their HW queues (and so shost.nr_hw_queues is
set), remove the conditional checks in hisi_sas_task_prep().
This change would affect v1 HW performance (as it does not expose HW
queues), but nobody uses it and support may be dropped soon.
Link: https://lore.kernel.org/r/1611659068-131975-3-git-send-email-john.garry@huawei.com
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The platform_get_irq() check for -EPROBE_DEFER was to ensure that all the
steps to add the SCSI host are not done and then only to realise that the
probe needs to be deferred.
However, since there is now an earlier check for this in
hisi_sas_interrupt_preinit(), this check is superfluous and may be removed.
Link: https://lore.kernel.org/r/1611659068-131975-2-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
lpfc depends on irq_poll library, but it is not selected automatically.
When irq_poll is not selected, compiling it can run into following error
ERROR: modpost: "irq_poll_init" [drivers/scsi/lpfc/lpfc.ko] undefined!
ERROR: modpost: "irq_poll_sched" [drivers/scsi/lpfc/lpfc.ko] undefined!
ERROR: modpost: "irq_poll_complete" [drivers/scsi/lpfc/lpfc.ko] undefined!
Link: https://lore.kernel.org/r/20210126000554.309858-1-ztong0001@gmail.com
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The patch to switch using SAM status values had some typos; fix them up.
Link: https://lore.kernel.org/r/20210125085415.70574-1-hare@suse.de
Fixes: 491152c7c3b5 ("scsi: ncr53c8xx: Use SAM status values")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The "pmb" pointer is freed at the start of the function and then freed
again in the error handling code.
Link: https://lore.kernel.org/r/YA6E8rO51hE56SVw@mwanda
Fixes: 92d7f7b0cde3 ("[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This was supposed to be "data" instead of "&data". The current code will
corrupt the stack.
Link: https://lore.kernel.org/r/YA6E0geUlL9Hs04A@mwanda
Fixes: dbf1f53cfd23 ("scsi: qla2xxx: Implementation to get and manage host, target stats and initiator port")
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The UFS core has received a substantial rework this cycle. This in
turn has caused a merge conflict in linux-next. Merge 5.11/scsi-fixes
into 5.12/scsi-queue and resolve the conflict.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The driver core ignores the return value of the remove callback, so
don't give isa drivers the chance to provide a value.
Adapt all isa_drivers with a remove callbacks accordingly; they all
return 0 unconditionally anyhow.
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for drivers/net/can/sja1000/tscan1.c
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Acked-by: Wolfram Sang <wsa@kernel.org> # for drivers/i2c/
Reviewed-by: Takashi Iway <tiwai@suse.de> # for sound/
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for drivers/media/
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210122092449.426097-4-uwe@kleine-koenig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We can remove 'q' from blk_execute_rq as well after the previous change
in blk_execute_rq_nowait.
And more importantly it never really was needed to start with given
that we can trivial derive it from struct request.
Cc: linux-scsi@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Cc: linux-ide@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Cc: linux-nfs@vger.kernel.org
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The 'q' is not used since commit a1ce35fa4985 ("block: remove dead
elevator code"), also update the comment of the function.
And more importantly it never really was needed to start with given
that we can trivial derive it from struct request.
Cc: target-devel@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Cc: linux-ide@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Cc: linux-nfs@vger.kernel.org
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix below warnings reported by coccicheck:
./drivers/scsi/qla2xxx/qla_init.c:3371:2-7: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:7855:5-10: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:7916:2-7: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:8113:4-18: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:8174:2-7: WARNING: NULL check before
some freeing functions is not needed.
Link: https://lore.kernel.org/r/1611306174-92627-1-git-send-email-abaci-bugfix@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Yang Li <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
NULL check before vfree is not needed.
Generated by: scripts/coccinelle/free/ifnullfree.cocci
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2012111113060.2669@hadrien
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Since Linus Torvalds reinstated KERN_CONT in commit 4bcc595ccd80 ("printk:
reinstate KERN_CONT for printing continuation lines") in 2015, the qla1280
SCSI driver printed a rather ugly and screen real estate wasting multi-line
per device status glibberish during boot. Fix this by adding KERN_CONT as
needed.
Tested on my Sgi Octane: https://youtu.be/Lfqe1SYR2jk
Link: https://lore.kernel.org/r/20201210.223944.388095546873159172.rene@exactcode.com
Signed-off-by: René Rebe <rene@exactcode.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Delete ufshcd_wb_buf_flush_enable() and ufshcd_wb_buf_flush_disable(). Move
the implementation into ufshcd_wb_toggle_flush().
Link: https://lore.kernel.org/r/20210121185736.12471-1-huobean@gmail.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The list iterator can't be NULL so this check is not required. Removing
the check silences a Smatch warning about inconsistent NULL checking.
drivers/scsi/qla2xxx/qla_dfs.c:371 qla_dfs_tgt_counters_show()
error: we previously assumed 'fcport' could be null (see line 372)
Link: https://lore.kernel.org/r/YAkaaSrhn1mFqyHy@mwanda
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix the following coccicheck warnings:
./drivers/scsi/qla2xxx/qla_isr.c:780:2-18: WARNING: Assignment
of 0/1 to bool variable.
Link: https://lore.kernel.org/r/1611127919-56551-1-git-send-email-abaci-bugfix@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Comment did not match function signature.
Link: https://lore.kernel.org/r/20210119205022.40000-1-ericcurtin17@gmail.com
Signed-off-by: Eric Curtin <ericcurtin17@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix the following coccicheck warning:
./drivers/scsi/mpt3sas/mpt3sas_base.c:2424:5-20: WARNING: Comparison of 0/1
to bool variable
Link: https://lore.kernel.org/r/1610355253-25960-1-git-send-email-abaci-bugfix@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
These variants were added for bisectability. Remove them, as all call sites
have now been convertd to use the original API.
Link: https://lore.kernel.org/r/20210118100955.1761652-20-a.darwish@linutronix.de
Cc: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.
Switch back to the original libas API, while still passing GFP context.
The libsas _gfp() variants will be removed afterwards.
Link: https://lore.kernel.org/r/20210118100955.1761652-19-a.darwish@linutronix.de
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.
Switch back to the original libas API, while still passing GFP context.
The libsas _gfp() variants will be removed afterwards.
Link: https://lore.kernel.org/r/20210118100955.1761652-18-a.darwish@linutronix.de
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.
Switch back to the original event notifiers API, while still passing GFP
context. The _gfp() notifier variants will be removed afterwards.
Link: https://lore.kernel.org/r/20210118100955.1761652-17-a.darwish@linutronix.de
Cc: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.
Switch back to the original libas API, while still passing GFP context.
The libsas _gfp() variants will be removed afterwards.
Link: https://lore.kernel.org/r/20210118100955.1761652-16-a.darwish@linutronix.de
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.
Switch back to the original libas API, while still passing GFP context.
The libsas _gfp() variants will be removed afterwards.
Link: https://lore.kernel.org/r/20210118100955.1761652-15-a.darwish@linutronix.de
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.
Switch back to the original libas API, while still passing GFP context.
The libsas _gfp() variants will be removed afterwards.
Link: https://lore.kernel.org/r/20210118100955.1761652-14-a.darwish@linutronix.de
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
All call-sites of below libsas APIs:
- sas_alloc_event()
- sas_notify_port_event()
- sas_notify_phy_event()
have been converted to use the _gfp()-suffixed version. Modify the
original APIs above to take a gfp_t flags parameter by default.
For bisectability, call-sites will be modified again to use the original
libsas APIs (while passing gfp_t). The temporary _gfp()-suffixed versions
can then be removed.
Link: https://lore.kernel.org/r/20210118100955.1761652-13-a.darwish@linutronix.de
Cc: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.
Below are the context analysis for modified functions:
=> hisi_sas_bytes_dmaed():
Since it is invoked from both process and atomic contexts, let its callers
pass the gfp_t flags:
* hisi_sas_main.c:
------------------
hisi_sas_phyup_work(): workqueue context
-> hisi_sas_bytes_dmaed(..., GFP_KERNEL)
hisi_sas_controller_reset_done(): has an msleep()
-> hisi_sas_rescan_topology()
-> hisi_sas_phy_down()
-> hisi_sas_bytes_dmaed(..., GFP_KERNEL)
hisi_sas_debug_I_T_nexus_reset(): calls wait_for_completion_timeout()
-> hisi_sas_phy_down()
-> hisi_sas_bytes_dmaed(..., GFP_KERNEL)
* hisi_sas_v1_hw.c:
-------------------
int_abnormal_v1_hw(): irq handler
-> hisi_sas_phy_down()
-> hisi_sas_bytes_dmaed(..., GFP_ATOMIC)
* hisi_sas_v[23]_hw.c:
----------------------
int_phy_updown_v[23]_hw(): irq handler
-> phy_down_v[23]_hw()
-> hisi_sas_phy_down()
-> hisi_sas_bytes_dmaed(..., GFP_ATOMIC)
=> int_bcast_v1_hw() and phy_bcast_v3_hw():
Both are invoked exclusively from irq handlers. Pass GFP_ATOMIC.
Link: https://lore.kernel.org/r/20210118100955.1761652-12-a.darwish@linutronix.de
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.
Context analysis:
aic94xx_hwi.c: asd_dl_tasklet_handler()
-> asd_ascb::tasklet_complete()
== escb_tasklet_complete()
-> aic94xx_scb.c: asd_phy_event_tasklet()
-> aic94xx_scb.c: asd_bytes_dmaed_tasklet()
-> aic94xx_scb.c: asd_link_reset_err_tasklet()
-> aic94xx_scb.c: asd_primitive_rcvd_tasklet()
All functions are invoked by escb_tasklet_complete(), which is invoked by
the tasklet handler. Pass GFP_ATOMIC.
Link: https://lore.kernel.org/r/20210118100955.1761652-11-a.darwish@linutronix.de
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.
Call chain analysis, pm8001_hwi.c:
pm8001_interrupt_handler_msix() || pm8001_interrupt_handler_intx() || pm8001_tasklet()
-> PM8001_CHIP_DISP->isr() = pm80xx_chip_isr()
-> process_oq [spin_lock_irqsave(&pm8001_ha->lock, ...)]
-> process_one_iomb()
-> mpi_hw_event()
-> hw_event_sas_phy_up()
-> pm8001_bytes_dmaed()
-> hw_event_sata_phy_up
-> pm8001_bytes_dmaed()
All functions are invoked by process_one_iomb(), which is invoked by the
interrupt service routine and the tasklet handler. A similar call chain is
also found at pm80xx_hwi.c. Pass GFP_ATOMIC.
For pm8001_sas.c, pm8001_phy_control() runs in task context as it calls
wait_for_completion() and msleep(). Pass GFP_KERNEL.
Link: https://lore.kernel.org/r/20210118100955.1761652-10-a.darwish@linutronix.de
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.
Context analysis:
- sas_enable_revalidation(): process, acquires mutex
- sas_resume_ha(): process, calls wait_event_timeout()
Link: https://lore.kernel.org/r/20210118100955.1761652-9-a.darwish@linutronix.de
Cc: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.
libsas sas_notify_port_event() is called from
isci_port_bc_change_received(). Below is the context analysis for all of
its call chains:
host.c: sci_controller_error_handler(): atomic, irq handler (*)
OR host.c: sci_controller_completion_handler(), atomic, tasklet (*)
-> sci_controller_process_completions()
-> sci_controller_event_completion()
-> phy.c: sci_phy_event_handler()
-> port.c: sci_port_broadcast_change_received()
-> isci_port_bc_change_received()
host.c: isci_host_init() (@)
spin_lock_irq(isci_host::scic_lock)
-> sci_controller_initialize(), atomic (*)
-> port_config.c: sci_port_configuration_agent_initialize()
-> sci_mpc_agent_validate_phy_configuration()
-> port.c: sci_port_add_phy()
-> sci_port_set_phy()
-> phy.c: sci_phy_set_port()
-> port.c: sci_port_broadcast_change_received()
-> isci_port_bc_change_received()
port_config.c: apc_agent_timeout(), atomic, timer callback (*)
-> sci_apc_agent_configure_ports()
-> port.c: sci_port_add_phy()
-> sci_port_set_phy()
-> phy.c: sci_phy_set_port()
-> port.c: sci_port_broadcast_change_received()
-> isci_port_bc_change_received()
phy.c: enter SCI state: *SCI_PHY_STOPPED* # Cont. from [1]
-> sci_phy_stopped_state_enter()
-> host.c: sci_controller_link_down()
-> ->link_down_handler()
== port_config.c: sci_apc_agent_link_down()
-> port.c: sci_port_remove_phy()
-> sci_port_clear_phy()
-> phy.c: sci_phy_set_port()
-> port.c: sci_port_broadcast_change_received()
-> isci_port_bc_change_received()
phy.c: enter SCI state: *SCI_PHY_STARTING* # Cont. from [2]
-> sci_phy_starting_state_enter()
-> host.c: sci_controller_link_down()
-> ->link_down_handler()
== port_config.c: sci_apc_agent_link_down()
-> port.c: sci_port_remove_phy()
-> sci_port_clear_phy()
-> phy.c: sci_phy_set_port()
-> port.c: sci_port_broadcast_change_received()
-> isci_port_bc_change_received()
[1] Call chains for entering state: *SCI_PHY_STOPPED*
-----------------------------------------------------
host.c: isci_host_init() (@)
spin_lock_irq(isci_host::scic_lock)
-> sci_controller_initialize(), atomic (*)
-> phy.c: sci_phy_initialize()
-> phy.c: sci_phy_link_layer_initialization()
-> phy.c: sci_change_state(SCI_PHY_STOPPED)
init.c: PCI ->remove() || PM_OPS ->suspend, process context (+)
-> host.c: isci_host_deinit()
-> sci_controller_stop_phys()
-> phy.c: sci_phy_stop()
-> sci_change_state(SCI_PHY_STOPPED)
phy.c: isci_phy_control()
spin_lock_irqsave(isci_host::scic_lock, )
-> sci_phy_stop(), atomic (*)
-> sci_change_state(SCI_PHY_STOPPED)
[2] Call chains for entering state: *SCI_PHY_STARTING*
------------------------------------------------------
phy.c: phy_sata_timeout(), atimer, timer callback (*)
spin_lock_irqsave(isci_host::scic_lock, )
-> sci_change_state(SCI_PHY_STARTING)
host.c: phy_startup_timeout(), atomic, timer callback (*)
spin_lock_irqsave(isci_host::scic_lock, )
-> sci_controller_start_next_phy()
-> sci_phy_start()
-> sci_change_state(SCI_PHY_STARTING)
host.c: isci_host_start() (@)
spin_lock_irq(isci_host::scic_lock)
-> sci_controller_start(), atomic (*)
-> sci_controller_start_next_phy()
-> sci_phy_start()
-> sci_change_state(SCI_PHY_STARTING)
phy.c: Enter SCI state *SCI_PHY_SUB_FINAL* # Cont. from [2A]
-> sci_change_state(SCI_PHY_SUB_FINAL)
-> sci_phy_starting_final_substate_enter()
-> sci_change_state(SCI_PHY_READY)
-> Enter SCI state: *SCI_PHY_READY*
-> sci_phy_ready_state_enter()
-> host.c: sci_controller_link_up()
-> sci_controller_start_next_phy()
-> sci_phy_start()
-> sci_change_state(SCI_PHY_STARTING)
phy.c: sci_phy_event_handler(), atomic, discussed earlier (*)
-> sci_change_state(SCI_PHY_STARTING), 11 instances
port.c: isci_port_perform_hard_reset()
spin_lock_irqsave(isci_host::scic_lock, )
-> port.c: sci_port_hard_reset(), atomic (*)
-> phy.c: sci_phy_reset()
-> sci_change_state(SCI_PHY_RESETTING)
-> enter SCI PHY state: *SCI_PHY_RESETTING*
-> sci_phy_resetting_state_enter()
-> sci_change_state(SCI_PHY_STARTING)
[2A] Call chains for entering SCI state: *SCI_PHY_SUB_FINAL*
------------------------------------------------------------
host.c: power_control_timeout(), atomic, timer callback (*)
spin_lock_irqsave(isci_host::scic_lock, )
-> phy.c: sci_phy_consume_power_handler()
-> phy.c: sci_change_state(SCI_PHY_SUB_FINAL)
host.c: sci_controller_error_handler(): atomic, irq handler (*)
OR host.c: sci_controller_completion_handler(), atomic, tasklet (*)
-> sci_controller_process_completions()
-> sci_controller_unsolicited_frame()
-> phy.c: sci_phy_frame_handler()
-> sci_change_state(SCI_PHY_SUB_AWAIT_SAS_POWER)
-> sci_phy_starting_await_sas_power_substate_enter()
-> host.c: sci_controller_power_control_queue_insert()
-> phy.c: sci_phy_consume_power_handler()
-> sci_change_state(SCI_PHY_SUB_FINAL)
-> sci_change_state(SCI_PHY_SUB_FINAL)
-> sci_controller_event_completion()
-> phy.c: sci_phy_event_handler()
-> sci_phy_start_sata_link_training()
-> sci_change_state(SCI_PHY_SUB_AWAIT_SATA_POWER)
-> sci_phy_starting_await_sata_power_substate_enter
-> host.c: sci_controller_power_control_queue_insert()
-> phy.c: sci_phy_consume_power_handler()
-> sci_change_state(SCI_PHY_SUB_FINAL)
As can be seen from the "(*)" markers above, almost all the call-chains are
atomic. The only exception, marked with "(+)", is a PCI ->remove() and
PM_OPS ->suspend() cold path. Thus, pass GFP_ATOMIC to the libsas port
event notifier.
Note, the now-replaced libsas APIs used in_interrupt() to implicitly decide
which memory allocation type to use. This was only partially correct, as
it fails to choose the correct GFP flags when just preemption or interrupts
are disabled. Such buggy code paths are marked with "(@)" in the call
chains above.
Link: https://lore.kernel.org/r/20210118100955.1761652-8-a.darwish@linutronix.de
Fixes: 1c393b970e0f ("scsi: libsas: Use dynamic alloced work to avoid sas event lost")
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.
libsas sas_notify_port_event() is called from isci_port_link_up(). Below
is the context analysis for all of its call chains:
host.c: isci_host_init() (@)
spin_lock_irq(isci_host::scic_lock)
-> sci_controller_initialize(), atomic (*)
-> port_config.c: sci_port_configuration_agent_initialize()
-> sci_mpc_agent_validate_phy_configuration()
-> port.c: sci_port_add_phy()
-> sci_port_general_link_up_handler()
-> sci_port_activate_phy()
-> isci_port_link_up()
port_config.c: apc_agent_timeout(), atomic, timer callback (*)
-> sci_apc_agent_configure_ports()
-> port.c: sci_port_add_phy()
-> sci_port_general_link_up_handler()
-> sci_port_activate_phy()
-> isci_port_link_up()
phy.c: enter SCI state: *SCI_PHY_SUB_FINAL* # Cont. from [1]
-> phy.c: sci_phy_starting_final_substate_enter()
-> phy.c: sci_change_state(SCI_PHY_READY)
-> enter SCI state: *SCI_PHY_READY*
-> phy.c: sci_phy_ready_state_enter()
-> host.c: sci_controller_link_up()
-> .link_up_handler()
== port_config.c: sci_apc_agent_link_up()
-> port.c: sci_port_link_up()
-> (continue at [A])
== port_config.c: sci_mpc_agent_link_up()
-> port.c: sci_port_link_up()
-> (continue at [A])
port_config.c: mpc_agent_timeout(), atomic, timer callback (*)
spin_lock_irqsave(isci_host::scic_lock, )
-> ->link_up_handler()
== port_config.c: sci_apc_agent_link_up()
-> port.c: sci_port_link_up()
-> (continue at [A])
== port_config.c: sci_mpc_agent_link_up()
-> port.c: sci_port_link_up()
-> (continue at [A])
[A] port.c: sci_port_link_up()
-> sci_port_activate_phy()
-> isci_port_link_up()
-> sci_port_general_link_up_handler()
-> sci_port_activate_phy()
-> isci_port_link_up()
[1] Call chains for entering SCI state: *SCI_PHY_SUB_FINAL*
-----------------------------------------------------------
host.c: power_control_timeout(), atomic, timer callback (*)
spin_lock_irqsave(isci_host::scic_lock, )
-> phy.c: sci_phy_consume_power_handler()
-> phy.c: sci_change_state(SCI_PHY_SUB_FINAL)
host.c: sci_controller_error_handler(): atomic, irq handler (*)
OR host.c: sci_controller_completion_handler(), atomic, tasklet (*)
-> sci_controller_process_completions()
-> sci_controller_unsolicited_frame()
-> phy.c: sci_phy_frame_handler()
-> sci_change_state(SCI_PHY_SUB_AWAIT_SAS_POWER)
-> sci_phy_starting_await_sas_power_substate_enter()
-> host.c: sci_controller_power_control_queue_insert()
-> phy.c: sci_phy_consume_power_handler()
-> sci_change_state(SCI_PHY_SUB_FINAL)
-> sci_change_state(SCI_PHY_SUB_FINAL)
-> sci_controller_event_completion()
-> phy.c: sci_phy_event_handler()
-> sci_phy_start_sata_link_training()
-> sci_change_state(SCI_PHY_SUB_AWAIT_SATA_POWER)
-> sci_phy_starting_await_sata_power_substate_enter
-> host.c: sci_controller_power_control_queue_insert()
-> phy.c: sci_phy_consume_power_handler()
-> sci_change_state(SCI_PHY_SUB_FINAL)
As can be seen from the "(*)" markers above, all the call-chains are
atomic. Pass GFP_ATOMIC to libsas port event notifier.
Note, the now-replaced libsas APIs used in_interrupt() to implicitly decide
which memory allocation type to use. This was only partially correct, as
it fails to choose the correct GFP flags when just preemption or interrupts
are disabled. Such buggy code paths are marked with "(@)" in the call
chains above.
Link: https://lore.kernel.org/r/20210118100955.1761652-7-a.darwish@linutronix.de
Fixes: 1c393b970e0f ("scsi: libsas: Use dynamic alloced work to avoid sas event lost")
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.
sas_notify_phy_event() is exclusively called by isci_port_link_down().
Below is the context analysis for all of its call chains:
port.c: port_timeout(), atomic, timer callback (*)
spin_lock_irqsave(isci_host::scic_lock, )
-> port_state_machine_change(..., SCI_PORT_FAILED)
-> enter SCI port state: *SCI_PORT_FAILED*
-> sci_port_failed_state_enter()
-> isci_port_hard_reset_complete()
-> isci_port_link_down()
port.c: isci_port_perform_hard_reset()
spin_lock_irqsave(isci_host::scic_lock, )
-> port.c: sci_port_hard_reset(), atomic (*)
-> phy.c: sci_phy_reset()
-> sci_change_state(SCI_PHY_RESETTING)
-> enter SCI PHY state: *SCI_PHY_RESETTING*
-> sci_phy_resetting_state_enter()
-> port.c: sci_port_deactivate_phy()
-> isci_port_link_down()
port.c: enter SCI port state: *SCI_PORT_READY* # Cont. from [1]
-> sci_port_ready_state_enter()
-> isci_port_hard_reset_complete()
-> isci_port_link_down()
phy.c: enter SCI state: *SCI_PHY_STOPPED* # Cont. from [2]
-> sci_phy_stopped_state_enter()
-> host.c: sci_controller_link_down()
-> ->link_down_handler()
== port_config.c: sci_apc_agent_link_down()
-> port.c: sci_port_remove_phy()
-> sci_port_deactivate_phy()
-> isci_port_link_down()
== port_config.c: sci_mpc_agent_link_down()
-> port.c: sci_port_link_down()
-> sci_port_deactivate_phy()
-> isci_port_link_down()
phy.c: enter SCI state: *SCI_PHY_STARTING* # Cont. from [3]
-> sci_phy_starting_state_enter()
-> host.c: sci_controller_link_down()
-> ->link_down_handler()
== port_config.c: sci_apc_agent_link_down()
-> port.c: sci_port_remove_phy()
-> isci_port_link_down()
== port_config.c: sci_mpc_agent_link_down()
-> port.c: sci_port_link_down()
-> sci_port_deactivate_phy()
-> isci_port_link_down()
[1] Call chains for 'enter SCI port state: *SCI_PORT_READY*'
------------------------------------------------------------
host.c: isci_host_init() (@)
spin_lock_irq(isci_host::scic_lock)
-> sci_controller_initialize(), atomic (*)
-> port_config.c: sci_port_configuration_agent_initialize()
-> sci_mpc_agent_validate_phy_configuration()
-> port.c: sci_port_add_phy()
-> sci_port_general_link_up_handler()
-> port_state_machine_change(, SCI_PORT_READY)
-> enter port state *SCI_PORT_READY*
host.c: isci_host_start() (@)
spin_lock_irq(isci_host::scic_lock)
-> host.c: sci_controller_start(), atomic (*)
-> host.c: sci_port_start()
-> port.c: port_state_machine_change(, SCI_PORT_READY)
-> enter port state *SCI_PORT_READY*
port_config.c: apc_agent_timeout(), atomic, timer callback (*)
-> sci_apc_agent_configure_ports()
-> port.c: sci_port_add_phy()
-> sci_port_general_link_up_handler()
-> port_state_machine_change(, SCI_PORT_READY)
-> enter port state *SCI_PORT_READY*
port_config.c: mpc_agent_timeout(), atomic, timer callback (*)
spin_lock_irqsave(isci_host::scic_lock, )
-> ->link_up_handler()
== port.c: sci_apc_agent_link_up()
-> sci_port_general_link_up_handler()
-> port_state_machine_change(, SCI_PORT_READY)
-> enter port state *SCI_PORT_READY*
== port.c: sci_mpc_agent_link_up()
-> port.c: sci_port_link_up()
-> sci_port_general_link_up_handler()
-> port_state_machine_change(, SCI_PORT_READY)
-> enter port state *SCI_PORT_READY*
phy.c: enter SCI state: SCI_PHY_SUB_FINAL # Cont. from [1A]
-> sci_phy_starting_final_substate_enter()
-> sci_change_state(SCI_PHY_READY)
-> enter SCI state: *SCI_PHY_READY*
-> sci_phy_ready_state_enter()
-> host.c: sci_controller_link_up()
-> port_agent.link_up_handler()
== port_config.c: sci_apc_agent_link_up()
-> port.c: sci_port_link_up()
-> sci_port_general_link_up_handler()
-> port_state_machine_change(, SCI_PORT_READY)
-> enter port state *SCI_PORT_READY*
== port_config.c: sci_mpc_agent_link_up()
-> port.c: sci_port_link_up()
-> sci_port_general_link_up_handler()
-> port_state_machine_change(, SCI_PORT_READY)
-> enter port state *SCI_PORT_READY*
[1A] Call chains for entering SCI state: *SCI_PHY_SUB_FINAL*
------------------------------------------------------------
host.c: power_control_timeout(), atomic, timer callback (*)
spin_lock_irqsave(isci_host::scic_lock, )
-> phy.c: sci_phy_consume_power_handler()
-> phy.c: sci_change_state(SCI_PHY_SUB_FINAL)
host.c: sci_controller_error_handler(): atomic, irq handler (*)
OR host.c: sci_controller_completion_handler(), atomic, tasklet (*)
-> sci_controller_process_completions()
-> sci_controller_unsolicited_frame()
-> phy.c: sci_phy_frame_handler()
-> sci_change_state(SCI_PHY_SUB_AWAIT_SAS_POWER)
-> sci_phy_starting_await_sas_power_substate_enter()
-> host.c: sci_controller_power_control_queue_insert()
-> phy.c: sci_phy_consume_power_handler()
-> sci_change_state(SCI_PHY_SUB_FINAL)
-> sci_change_state(SCI_PHY_SUB_FINAL)
-> sci_controller_event_completion()
-> phy.c: sci_phy_event_handler()
-> sci_phy_start_sata_link_training()
-> sci_change_state(SCI_PHY_SUB_AWAIT_SATA_POWER)
-> sci_phy_starting_await_sata_power_substate_enter
-> host.c: sci_controller_power_control_queue_insert()
-> phy.c: sci_phy_consume_power_handler()
-> sci_change_state(SCI_PHY_SUB_FINAL)
[2] Call chains for entering state: *SCI_PHY_STOPPED*
-----------------------------------------------------
host.c: isci_host_init() (@)
spin_lock_irq(isci_host::scic_lock)
-> sci_controller_initialize(), atomic (*)
-> phy.c: sci_phy_initialize()
-> phy.c: sci_phy_link_layer_initialization()
-> phy.c: sci_change_state(SCI_PHY_STOPPED)
init.c: PCI ->remove() || PM_OPS ->suspend, process context (+)
-> host.c: isci_host_deinit()
-> sci_controller_stop_phys()
-> phy.c: sci_phy_stop()
-> sci_change_state(SCI_PHY_STOPPED)
phy.c: isci_phy_control()
spin_lock_irqsave(isci_host::scic_lock, )
-> sci_phy_stop(), atomic (*)
-> sci_change_state(SCI_PHY_STOPPED)
[3] Call chains for entering state: *SCI_PHY_STARTING*
------------------------------------------------------
phy.c: phy_sata_timeout(), atimer, timer callback (*)
spin_lock_irqsave(isci_host::scic_lock, )
-> sci_change_state(SCI_PHY_STARTING)
host.c: phy_startup_timeout(), atomic, timer callback (*)
spin_lock_irqsave(isci_host::scic_lock, )
-> sci_controller_start_next_phy()
-> sci_phy_start()
-> sci_change_state(SCI_PHY_STARTING)
host.c: isci_host_start() (@)
spin_lock_irq(isci_host::scic_lock)
-> sci_controller_start(), atomic (*)
-> sci_controller_start_next_phy()
-> sci_phy_start()
-> sci_change_state(SCI_PHY_STARTING)
phy.c: Enter SCI state *SCI_PHY_SUB_FINAL*, atomic, check above (*)
-> sci_change_state(SCI_PHY_SUB_FINAL)
-> sci_phy_starting_final_substate_enter()
-> sci_change_state(SCI_PHY_READY)
-> Enter SCI state: *SCI_PHY_READY*
-> sci_phy_ready_state_enter()
-> host.c: sci_controller_link_up()
-> sci_controller_start_next_phy()
-> sci_phy_start()
-> sci_change_state(SCI_PHY_STARTING)
phy.c: sci_phy_event_handler(), atomic, discussed earlier (*)
-> sci_change_state(SCI_PHY_STARTING), 11 instances
phy.c: enter SCI state: *SCI_PHY_RESETTING*, atomic, discussed (*)
-> sci_phy_resetting_state_enter()
-> sci_change_state(SCI_PHY_STARTING)
As can be seen from the "(*)" markers above, almost all the call-chains are
atomic. The only exception, marked with "(+)", is a PCI ->remove() and
PM_OPS ->suspend() cold path. Thus, pass GFP_ATOMIC to the libsas phy event
notifier.
Note, The now-replaced libsas APIs used in_interrupt() to implicitly decide
which memory allocation type to use. This was only partially correct, as
it fails to choose the correct GFP flags when just preemption or interrupts
are disabled. Such buggy code paths are marked with "(@)" in the call
chains above.
Link: https://lore.kernel.org/r/20210118100955.1761652-6-a.darwish@linutronix.de
Fixes: 1c393b970e0f ("scsi: libsas: Use dynamic alloced work to avoid sas event lost")
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
