| Age | Commit message (Collapse) | Author |
|---|
|
Inline encryption hardware compliant with the UFS v2.1 standard or with
the upcoming version of the eMMC standard has the following properties:
(1) Per I/O request, the encryption key is specified by a previously
loaded keyslot. There might be only a small number of keyslots.
(2) Per I/O request, the starting IV is specified by a 64-bit "data unit
number" (DUN). IV bits 64-127 are assumed to be 0. The hardware
automatically increments the DUN for each "data unit" of
configurable size in the request, e.g. for each filesystem block.
Property (1) makes it inefficient to use the traditional fscrypt
per-file keys. Property (2) precludes the use of the existing
DIRECT_KEY fscrypt policy flag, which needs at least 192 IV bits.
Therefore, add a new fscrypt policy flag IV_INO_LBLK_64 which causes the
encryption to modified as follows:
- The encryption keys are derived from the master key, encryption mode
number, and filesystem UUID.
- The IVs are chosen as (inode_number << 32) | file_logical_block_num.
For filenames encryption, file_logical_block_num is 0.
Since the file nonces aren't used in the key derivation, many files may
share the same encryption key. This is much more efficient on the
target hardware. Including the inode number in the IVs and mixing the
filesystem UUID into the keys ensures that data in different files is
nevertheless still encrypted differently.
Additionally, limiting the inode and block numbers to 32 bits and
placing the block number in the low bits maintains compatibility with
the 64-bit DUN convention (property (2) above).
Since this scheme assumes that inode numbers are stable (which may
preclude filesystem shrinking) and that inode and file logical block
numbers are at most 32-bit, IV_INO_LBLK_64 will only be allowed on
filesystems that meet these constraints. These are acceptable
limitations for the cases where this format would actually be used.
Note that IV_INO_LBLK_64 is an on-disk format, not an implementation.
This patch just adds support for it using the existing filesystem layer
encryption. A later patch will add support for inline encryption.
Reviewed-by: Paul Crowley <paulcrowley@google.com>
Co-developed-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
The access to logged_impl_name is technically a data race, which tools
like KCSAN could complain about in the future. See:
https://github.com/google/ktsan/wiki/READ_ONCE-and-WRITE_ONCE
Fix by using xchg(), which also ensures that only one thread does the
logging.
This also required switching from bool to int, to avoid a build error on
the RISC-V architecture which doesn't implement xchg on bytes.
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
memset the struct fscrypt_info to zero before freeing. This isn't
really needed currently, since there's no secret key directly in the
fscrypt_info. But there's a decent chance that someone will add such a
field in the future, e.g. in order to use an API that takes a raw key
such as siphash(). So it's good to do this as a hardening measure.
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Now that ext4 and f2fs implement their own post-read workflow that
supports both fscrypt and fsverity, the fscrypt-only workflow based
around struct fscrypt_ctx is no longer used. So remove the unused code.
This is based on a patch from Chandan Rajendra's "Consolidate FS read
I/O callbacks code" patchset, but rebased onto the latest kernel, folded
__fscrypt_decrypt_bio() into fscrypt_decrypt_bio(), cleaned up
fscrypt_initialize(), and updated the commit message.
Originally-from: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Instead of open-coding the calculations for ESSIV handling, use an ESSIV
skcipher which does all of this under the hood. ESSIV was added to the
crypto API in v5.4.
This is based on a patch from Ard Biesheuvel, but reworked to apply
after all the fscrypt changes that went into v5.4.
Tested with 'kvm-xfstests -c ext4,f2fs -g encrypt', including the
ciphertext verification tests for v1 and v2 encryption policies.
Originally-from: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
By looking up the master keys in a filesystem-level keyring rather than
in the calling processes' key hierarchy, it becomes possible for a user
to set an encryption policy which refers to some key they don't actually
know, then encrypt their files using that key. Cryptographically this
isn't much of a problem, but the semantics of this would be a bit weird.
Thus, enforce that a v2 encryption policy can only be set if the user
has previously added the key, or has capable(CAP_FOWNER).
We tolerate that this problem will continue to exist for v1 encryption
policies, however; there is no way around that.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Add a root-only variant of the FS_IOC_REMOVE_ENCRYPTION_KEY ioctl which
removes all users' claims of the key, not just the current user's claim.
I.e., it always removes the key itself, no matter how many users have
added it.
This is useful for forcing a directory to be locked, without having to
figure out which user ID(s) the key was added under. This is planned to
be used by a command like 'sudo fscrypt lock DIR --all-users' in the
fscrypt userspace tool (http://github.com/google/fscrypt).
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Allow the FS_IOC_ADD_ENCRYPTION_KEY and FS_IOC_REMOVE_ENCRYPTION_KEY
ioctls to be used by non-root users to add and remove encryption keys
from the filesystem-level crypto keyrings, subject to limitations.
Motivation: while privileged fscrypt key management is sufficient for
some users (e.g. Android and Chromium OS, where a privileged process
manages all keys), the old API by design also allows non-root users to
set up and use encrypted directories, and we don't want to regress on
that. Especially, we don't want to force users to continue using the
old API, running into the visibility mismatch between files and keyrings
and being unable to "lock" encrypted directories.
Intuitively, the ioctls have to be privileged since they manipulate
filesystem-level state. However, it's actually safe to make them
unprivileged if we very carefully enforce some specific limitations.
First, each key must be identified by a cryptographic hash so that a
user can't add the wrong key for another user's files. For v2
encryption policies, we use the key_identifier for this. v1 policies
don't have this, so managing keys for them remains privileged.
Second, each key a user adds is charged to their quota for the keyrings
service. Thus, a user can't exhaust memory by adding a huge number of
keys. By default each non-root user is allowed up to 200 keys; this can
be changed using the existing sysctl 'kernel.keys.maxkeys'.
Third, if multiple users add the same key, we keep track of those users
of the key (of which there remains a single copy), and won't really
remove the key, i.e. "lock" the encrypted files, until all those users
have removed it. This prevents denial of service attacks that would be
possible under simpler schemes, such allowing the first user who added a
key to remove it -- since that could be a malicious user who has
compromised the key. Of course, encryption keys should be kept secret,
but the idea is that using encryption should never be *less* secure than
not using encryption, even if your key was compromised.
We tolerate that a user will be unable to really remove a key, i.e.
unable to "lock" their encrypted files, if another user has added the
same key. But in a sense, this is actually a good thing because it will
avoid providing a false notion of security where a key appears to have
been removed when actually it's still in memory, available to any
attacker who compromises the operating system kernel.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Add a new fscrypt policy version, "v2". It has the following changes
from the original policy version, which we call "v1" (*):
- Master keys (the user-provided encryption keys) are only ever used as
input to HKDF-SHA512. This is more flexible and less error-prone, and
it avoids the quirks and limitations of the AES-128-ECB based KDF.
Three classes of cryptographically isolated subkeys are defined:
- Per-file keys, like used in v1 policies except for the new KDF.
- Per-mode keys. These implement the semantics of the DIRECT_KEY
flag, which for v1 policies made the master key be used directly.
These are also planned to be used for inline encryption when
support for it is added.
- Key identifiers (see below).
- Each master key is identified by a 16-byte master_key_identifier,
which is derived from the key itself using HKDF-SHA512. This prevents
users from associating the wrong key with an encrypted file or
directory. This was easily possible with v1 policies, which
identified the key by an arbitrary 8-byte master_key_descriptor.
- The key must be provided in the filesystem-level keyring, not in a
process-subscribed keyring.
The following UAPI additions are made:
- The existing ioctl FS_IOC_SET_ENCRYPTION_POLICY can now be passed a
fscrypt_policy_v2 to set a v2 encryption policy. It's disambiguated
from fscrypt_policy/fscrypt_policy_v1 by the version code prefix.
- A new ioctl FS_IOC_GET_ENCRYPTION_POLICY_EX is added. It allows
getting the v1 or v2 encryption policy of an encrypted file or
directory. The existing FS_IOC_GET_ENCRYPTION_POLICY ioctl could not
be used because it did not have a way for userspace to indicate which
policy structure is expected. The new ioctl includes a size field, so
it is extensible to future fscrypt policy versions.
- The ioctls FS_IOC_ADD_ENCRYPTION_KEY, FS_IOC_REMOVE_ENCRYPTION_KEY,
and FS_IOC_GET_ENCRYPTION_KEY_STATUS now support managing keys for v2
encryption policies. Such keys are kept logically separate from keys
for v1 encryption policies, and are identified by 'identifier' rather
than by 'descriptor'. The 'identifier' need not be provided when
adding a key, since the kernel will calculate it anyway.
This patch temporarily keeps adding/removing v2 policy keys behind the
same permission check done for adding/removing v1 policy keys:
capable(CAP_SYS_ADMIN). However, the next patch will carefully take
advantage of the cryptographically secure master_key_identifier to allow
non-root users to add/remove v2 policy keys, thus providing a full
replacement for v1 policies.
(*) Actually, in the API fscrypt_policy::version is 0 while on-disk
fscrypt_context::format is 1. But I believe it makes the most sense
to advance both to '2' to have them be in sync, and to consider the
numbering to start at 1 except for the API quirk.
Reviewed-by: Paul Crowley <paulcrowley@google.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Add an implementation of HKDF (RFC 5869) to fscrypt, for the purpose of
deriving additional key material from the fscrypt master keys for v2
encryption policies. HKDF is a key derivation function built on top of
HMAC. We choose SHA-512 for the underlying unkeyed hash, and use an
"hmac(sha512)" transform allocated from the crypto API.
We'll be using this to replace the AES-ECB based KDF currently used to
derive the per-file encryption keys. While the AES-ECB based KDF is
believed to meet the original security requirements, it is nonstandard
and has problems that don't exist in modern KDFs such as HKDF:
1. It's reversible. Given a derived key and nonce, an attacker can
easily compute the master key. This is okay if the master key and
derived keys are equally hard to compromise, but now we'd like to be
more robust against threats such as a derived key being compromised
through a timing attack, or a derived key for an in-use file being
compromised after the master key has already been removed.
2. It doesn't evenly distribute the entropy from the master key; each 16
input bytes only affects the corresponding 16 output bytes.
3. It isn't easily extensible to deriving other values or keys, such as
a public hash for securely identifying the key, or per-mode keys.
Per-mode keys will be immediately useful for Adiantum encryption, for
which fscrypt currently uses the master key directly, introducing
unnecessary usage constraints. Per-mode keys will also be useful for
hardware inline encryption, which is currently being worked on.
HKDF solves all the above problems.
Reviewed-by: Paul Crowley <paulcrowley@google.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Add a new fscrypt ioctl, FS_IOC_GET_ENCRYPTION_KEY_STATUS. Given a key
specified by 'struct fscrypt_key_specifier' (the same way a key is
specified for the other fscrypt key management ioctls), it returns
status information in a 'struct fscrypt_get_key_status_arg'.
The main motivation for this is that applications need to be able to
check whether an encrypted directory is "unlocked" or not, so that they
can add the key if it is not, and avoid adding the key (which may
involve prompting the user for a passphrase) if it already is.
It's possible to use some workarounds such as checking whether opening a
regular file fails with ENOKEY, or checking whether the filenames "look
like gibberish" or not. However, no workaround is usable in all cases.
Like the other key management ioctls, the keyrings syscalls may seem at
first to be a good fit for this. Unfortunately, they are not. Even if
we exposed the keyring ID of the ->s_master_keys keyring and gave
everyone Search permission on it (note: currently the keyrings
permission system would also allow everyone to "invalidate" the keyring
too), the fscrypt keys have an additional state that doesn't map cleanly
to the keyrings API: the secret can be removed, but we can be still
tracking the files that were using the key, and the removal can be
re-attempted or the secret added again.
After later patches, some applications will also need a way to determine
whether a key was added by the current user vs. by some other user.
Reserved fields are included in fscrypt_get_key_status_arg for this and
other future extensions.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Add a new fscrypt ioctl, FS_IOC_REMOVE_ENCRYPTION_KEY. This ioctl
removes an encryption key that was added by FS_IOC_ADD_ENCRYPTION_KEY.
It wipes the secret key itself, then "locks" the encrypted files and
directories that had been unlocked using that key -- implemented by
evicting the relevant dentries and inodes from the VFS caches.
The problem this solves is that many fscrypt users want the ability to
remove encryption keys, causing the corresponding encrypted directories
to appear "locked" (presented in ciphertext form) again. Moreover,
users want removing an encryption key to *really* remove it, in the
sense that the removed keys cannot be recovered even if kernel memory is
compromised, e.g. by the exploit of a kernel security vulnerability or
by a physical attack. This is desirable after a user logs out of the
system, for example. In many cases users even already assume this to be
the case and are surprised to hear when it's not.
It is not sufficient to simply unlink the master key from the keyring
(or to revoke or invalidate it), since the actual encryption transform
objects are still pinned in memory by their inodes. Therefore, to
really remove a key we must also evict the relevant inodes.
Currently one workaround is to run 'sync && echo 2 >
/proc/sys/vm/drop_caches'. But, that evicts all unused inodes in the
system rather than just the inodes associated with the key being
removed, causing severe performance problems. Moreover, it requires
root privileges, so regular users can't "lock" their encrypted files.
Another workaround, used in Chromium OS kernels, is to add a new
VFS-level ioctl FS_IOC_DROP_CACHE which is a more restricted version of
drop_caches that operates on a single super_block. It does:
shrink_dcache_sb(sb);
invalidate_inodes(sb, false);
But it's still a hack. Yet, the major users of filesystem encryption
want this feature badly enough that they are actually using these hacks.
To properly solve the problem, start maintaining a list of the inodes
which have been "unlocked" using each master key. Originally this
wasn't possible because the kernel didn't keep track of in-use master
keys at all. But, with the ->s_master_keys keyring it is now possible.
Then, add an ioctl FS_IOC_REMOVE_ENCRYPTION_KEY. It finds the specified
master key in ->s_master_keys, then wipes the secret key itself, which
prevents any additional inodes from being unlocked with the key. Then,
it syncs the filesystem and evicts the inodes in the key's list. The
normal inode eviction code will free and wipe the per-file keys (in
->i_crypt_info). Note that freeing ->i_crypt_info without evicting the
inodes was also considered, but would have been racy.
Some inodes may still be in use when a master key is removed, and we
can't simply revoke random file descriptors, mmap's, etc. Thus, the
ioctl simply skips in-use inodes, and returns -EBUSY to indicate that
some inodes weren't evicted. The master key *secret* is still removed,
but the fscrypt_master_key struct remains to keep track of the remaining
inodes. Userspace can then retry the ioctl to evict the remaining
inodes. Alternatively, if userspace adds the key again, the refreshed
secret will be associated with the existing list of inodes so they
remain correctly tracked for future key removals.
The ioctl doesn't wipe pagecache pages. Thus, we tolerate that after a
kernel compromise some portions of plaintext file contents may still be
recoverable from memory. This can be solved by enabling page poisoning
system-wide, which security conscious users may choose to do. But it's
very difficult to solve otherwise, e.g. note that plaintext file
contents may have been read in other places than pagecache pages.
Like FS_IOC_ADD_ENCRYPTION_KEY, FS_IOC_REMOVE_ENCRYPTION_KEY is
initially restricted to privileged users only. This is sufficient for
some use cases, but not all. A later patch will relax this restriction,
but it will require introducing key hashes, among other changes.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Add a new fscrypt ioctl, FS_IOC_ADD_ENCRYPTION_KEY. This ioctl adds an
encryption key to the filesystem's fscrypt keyring ->s_master_keys,
making any files encrypted with that key appear "unlocked".
Why we need this
~~~~~~~~~~~~~~~~
The main problem is that the "locked/unlocked" (ciphertext/plaintext)
status of encrypted files is global, but the fscrypt keys are not.
fscrypt only looks for keys in the keyring(s) the process accessing the
filesystem is subscribed to: the thread keyring, process keyring, and
session keyring, where the session keyring may contain the user keyring.
Therefore, userspace has to put fscrypt keys in the keyrings for
individual users or sessions. But this means that when a process with a
different keyring tries to access encrypted files, whether they appear
"unlocked" or not is nondeterministic. This is because it depends on
whether the files are currently present in the inode cache.
Fixing this by consistently providing each process its own view of the
filesystem depending on whether it has the key or not isn't feasible due
to how the VFS caches work. Furthermore, while sometimes users expect
this behavior, it is misguided for two reasons. First, it would be an
OS-level access control mechanism largely redundant with existing access
control mechanisms such as UNIX file permissions, ACLs, LSMs, etc.
Encryption is actually for protecting the data at rest.
Second, almost all users of fscrypt actually do need the keys to be
global. The largest users of fscrypt, Android and Chromium OS, achieve
this by having PID 1 create a "session keyring" that is inherited by
every process. This works, but it isn't scalable because it prevents
session keyrings from being used for any other purpose.
On general-purpose Linux distros, the 'fscrypt' userspace tool [1] can't
similarly abuse the session keyring, so to make 'sudo' work on all
systems it has to link all the user keyrings into root's user keyring
[2]. This is ugly and raises security concerns. Moreover it can't make
the keys available to system services, such as sshd trying to access the
user's '~/.ssh' directory (see [3], [4]) or NetworkManager trying to
read certificates from the user's home directory (see [5]); or to Docker
containers (see [6], [7]).
By having an API to add a key to the *filesystem* we'll be able to fix
the above bugs, remove userspace workarounds, and clearly express the
intended semantics: the locked/unlocked status of an encrypted directory
is global, and encryption is orthogonal to OS-level access control.
Why not use the add_key() syscall
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We use an ioctl for this API rather than the existing add_key() system
call because the ioctl gives us the flexibility needed to implement
fscrypt-specific semantics that will be introduced in later patches:
- Supporting key removal with the semantics such that the secret is
removed immediately and any unused inodes using the key are evicted;
also, the eviction of any in-use inodes can be retried.
- Calculating a key-dependent cryptographic identifier and returning it
to userspace.
- Allowing keys to be added and removed by non-root users, but only keys
for v2 encryption policies; and to prevent denial-of-service attacks,
users can only remove keys they themselves have added, and a key is
only really removed after all users who added it have removed it.
Trying to shoehorn these semantics into the keyrings syscalls would be
very difficult, whereas the ioctls make things much easier.
However, to reuse code the implementation still uses the keyrings
service internally. Thus we get lockless RCU-mode key lookups without
having to re-implement it, and the keys automatically show up in
/proc/keys for debugging purposes.
References:
[1] https://github.com/google/fscrypt
[2] https://goo.gl/55cCrI#heading=h.vf09isp98isb
[3] https://github.com/google/fscrypt/issues/111#issuecomment-444347939
[4] https://github.com/google/fscrypt/issues/116
[5] https://bugs.launchpad.net/ubuntu/+source/fscrypt/+bug/1770715
[6] https://github.com/google/fscrypt/issues/128
[7] https://askubuntu.com/questions/1130306/cannot-run-docker-on-an-encrypted-filesystem
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Rename keyinfo.c to keysetup.c since this better describes what the file
does (sets up the key), and it matches the new file keysetup_v1.c.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
In preparation for introducing v2 encryption policies which will find
and derive encryption keys differently from the current v1 encryption
policies, move the v1 policy-specific key setup code from keyinfo.c into
keysetup_v1.c.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Do some more refactoring of the key setup code, in preparation for
introducing a filesystem-level keyring and v2 encryption policies:
- Now that ci_inode exists, don't pass around the inode unnecessarily.
- Define a function setup_file_encryption_key() which handles the crypto
key setup given an under-construction fscrypt_info. Don't pass the
fscrypt_context, since everything is in the fscrypt_info.
[This will be extended for v2 policies and the fs-level keyring.]
- Define a function fscrypt_set_derived_key() which sets the per-file
key, without depending on anything specific to v1 policies.
[This will also be used for v2 policies.]
- Define a function fscrypt_setup_v1_file_key() which takes the raw
master key, thus separating finding the key from using it.
[This will also be used if the key is found in the fs-level keyring.]
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
In preparation for introducing a filesystem-level keyring which will
contain fscrypt master keys, rename the existing 'struct
fscrypt_master_key' to 'struct fscrypt_direct_key'. This is the
structure in the existing table of master keys that's maintained to
deduplicate the crypto transforms for v1 DIRECT_KEY policies.
I've chosen to keep this table as-is rather than make it automagically
add/remove the keys to/from the filesystem-level keyring, since that
would add a lot of extra complexity to the filesystem-level keyring.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Add an inode back-pointer to 'struct fscrypt_info', such that
inode->i_crypt_info->ci_inode == inode.
This will be useful for:
1. Evicting the inodes when a fscrypt key is removed, since we'll track
the inodes using a given key by linking their fscrypt_infos together,
rather than the inodes directly. This avoids bloating 'struct inode'
with a new list_head.
2. Simplifying the per-file key setup, since the inode pointer won't
have to be passed around everywhere just in case something goes wrong
and it's needed for fscrypt_warn().
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Update fs/crypto/ to use the new names for the UAPI constants rather
than the old names, then make the old definitions conditional on
!__KERNEL__.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Return ENOPKG rather than ENOENT when trying to open a file that's
encrypted using algorithms not available in the kernel's crypto API.
This avoids an ambiguity, since ENOENT is also returned when the file
doesn't exist.
Note: this is the same approach I'm taking for fs-verity.
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Users of fscrypt with non-default algorithms will encounter an error
like the following if they fail to include the needed algorithms into
the crypto API when configuring the kernel (as per the documentation):
Error allocating 'adiantum(xchacha12,aes)' transform: -2
This requires that the user figure out what the "-2" error means.
Make it more friendly by printing a warning like the following instead:
Missing crypto API support for Adiantum (API name: "adiantum(xchacha12,aes)")
Also upgrade the log level for *other* errors to KERN_ERR.
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
When fs/crypto/ encounters an inode with an invalid encryption context,
currently it prints a warning if the pair of encryption modes are
unrecognized, but it's silent if there are other problems such as
unsupported context size, format, or flags. To help people debug such
situations, add more warning messages.
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Most of the warning and error messages in fs/crypto/ are for situations
related to a specific inode, not merely to a super_block. So to make
things easier, make fscrypt_msg() take an inode rather than a
super_block, and make it print the inode number.
Note: This is the same approach I'm taking for fsverity_msg().
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Some minor cleanups for the code that base64 encodes and decodes
encrypted filenames and long name digests:
- Rename "digest_{encode,decode}()" => "base64_{encode,decode}()" since
they are used for filenames too, not just for long name digests.
- Replace 'while' loops with more conventional 'for' loops.
- Use 'u8' for binary data. Keep 'char' for string data.
- Fully constify the lookup table (pointer was not const).
- Improve comment.
No actual change in behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Since commit 643fa9612bf1 ("fscrypt: remove filesystem specific build
config option"), fs/crypto/ can no longer be built as a loadable module.
Thus it no longer needs a module_exit function, nor a MODULE_LICENSE.
So remove them, and change module_init to late_initcall.
Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
fscrypt only uses SHA-256 for AES-128-CBC-ESSIV, which isn't the default
and is only recommended on platforms that have hardware accelerated
AES-CBC but not AES-XTS. There's no link-time dependency, since SHA-256
is requested via the crypto API on first use.
To reduce bloat, we should limit FS_ENCRYPTION to selecting the default
algorithms only. SHA-256 by itself isn't that much bloat, but it's
being discussed to move ESSIV into a crypto API template, which would
incidentally bring in other things like "authenc" support, which would
all end up being built-in since FS_ENCRYPTION is now a bool.
For Adiantum encryption we already just document that users who want to
use it have to enable CONFIG_CRYPTO_ADIANTUM themselves. So, let's do
the same for AES-128-CBC-ESSIV and CONFIG_CRYPTO_SHA256.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
These should have been removed during commit 544d08fde258 ("fscrypt: use
a common logging function"), but I missed them.
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
The directory may have been removed when entering
fscrypt_ioctl_set_policy(). If so, the empty_dir() check will return
error for ext4 file system.
ext4_rmdir() sets i_size = 0, then ext4_empty_dir() reports an error
because 'inode->i_size < EXT4_DIR_REC_LEN(1) + EXT4_DIR_REC_LEN(2)'. If
the fs is mounted with errors=panic, it will trigger a panic issue.
Add the check IS_DEADDIR() to fix this problem.
Fixes: 9bd8212f981e ("ext4 crypto: add encryption policy and password salt support")
Cc: <stable@vger.kernel.org> # v4.1+
Signed-off-by: Hongjie Fang <hongjiefang@asrmicro.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
In __fscrypt_decrypt_bio(), only decrypt the blocks that actually
comprise the bio, rather than assuming blocksize == PAGE_SIZE and
decrypting the entirety of every page used in the bio.
This is in preparation for allowing encryption on ext4 filesystems with
blocksize != PAGE_SIZE.
This is based on work by Chandan Rajendra.
Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Rename fscrypt_decrypt_page() to fscrypt_decrypt_pagecache_blocks() and
redefine its behavior to decrypt all filesystem blocks in the given
region of the given page, rather than assuming that the region consists
of just one filesystem block. Also remove the 'inode' and 'lblk_num'
parameters, since they can be retrieved from the page as it's already
assumed to be a pagecache page.
This is in preparation for allowing encryption on ext4 filesystems with
blocksize != PAGE_SIZE.
This is based on work by Chandan Rajendra.
Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Currently fscrypt_decrypt_page() does one of two logically distinct
things depending on whether FS_CFLG_OWN_PAGES is set in the filesystem's
fscrypt_operations: decrypt a pagecache page in-place, or decrypt a
filesystem block in-place in any page. Currently these happen to share
the same implementation, but this conflates the notion of blocks and
pages. It also makes it so that all callers have to provide inode and
lblk_num, when fscrypt could determine these itself for pagecache pages.
Therefore, move the FS_CFLG_OWN_PAGES behavior into a new function
fscrypt_decrypt_block_inplace(). This mirrors
fscrypt_encrypt_block_inplace().
This is in preparation for allowing encryption on ext4 filesystems with
blocksize != PAGE_SIZE.
Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Adjust fscrypt_zeroout_range() to encrypt a block at a time rather than
a page at a time, so that it works when blocksize < PAGE_SIZE.
This isn't optimized for performance, but then again this function
already wasn't optimized for performance. As a future optimization, we
could submit much larger bios here.
This is in preparation for allowing encryption on ext4 filesystems with
blocksize != PAGE_SIZE.
This is based on work by Chandan Rajendra.
Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Rename fscrypt_encrypt_page() to fscrypt_encrypt_pagecache_blocks() and
redefine its behavior to encrypt all filesystem blocks from the given
region of the given page, rather than assuming that the region consists
of just one filesystem block. Also remove the 'inode' and 'lblk_num'
parameters, since they can be retrieved from the page as it's already
assumed to be a pagecache page.
This is in preparation for allowing encryption on ext4 filesystems with
blocksize != PAGE_SIZE.
This is based on work by Chandan Rajendra.
Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
fscrypt_encrypt_page() behaves very differently depending on whether the
filesystem set FS_CFLG_OWN_PAGES in its fscrypt_operations. This makes
the function difficult to understand and document. It also makes it so
that all callers have to provide inode and lblk_num, when fscrypt could
determine these itself for pagecache pages.
Therefore, move the FS_CFLG_OWN_PAGES behavior into a new function
fscrypt_encrypt_block_inplace().
This is in preparation for allowing encryption on ext4 filesystems with
blocksize != PAGE_SIZE.
Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Replace some BUG_ON()s with WARN_ON_ONCE() and returning an error code,
and move the check for len divisible by FS_CRYPTO_BLOCK_SIZE into
fscrypt_crypt_block() so that it's done for both encryption and
decryption, not just encryption.
Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
fscrypt_do_page_crypto() only does a single encryption or decryption
operation, with a single logical block number (single IV). So it
actually operates on a filesystem block, not a "page" per se. To
reflect this, rename it to fscrypt_crypt_block().
Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Now that fscrypt_ctx is not used for writes, remove the 'w' fields.
Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Currently, bounce page handling for writes to encrypted files is
unnecessarily complicated. A fscrypt_ctx is allocated along with each
bounce page, page_private(bounce_page) points to this fscrypt_ctx, and
fscrypt_ctx::w::control_page points to the original pagecache page.
However, because writes don't use the fscrypt_ctx for anything else,
there's no reason why page_private(bounce_page) can't just point to the
original pagecache page directly.
Therefore, this patch makes this change. In the process, it also cleans
up the API exposed to filesystems that allows testing whether a page is
a bounce page, getting the pagecache page from a bounce page, and
freeing a bounce page.
Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull fscrypt updates from Ted Ts'o:
"Clean up fscrypt's dcache revalidation support, and other
miscellaneous cleanups"
* tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: cache decrypted symlink target in ->i_link
vfs: use READ_ONCE() to access ->i_link
fscrypt: fix race where ->lookup() marks plaintext dentry as ciphertext
fscrypt: only set dentry_operations on ciphertext dentries
fs, fscrypt: clear DCACHE_ENCRYPTED_NAME when unaliasing directory
fscrypt: fix race allowing rename() and link() of ciphertext dentries
fscrypt: clean up and improve dentry revalidation
fscrypt: use READ_ONCE() to access ->i_crypt_info
fscrypt: remove WARN_ON_ONCE() when decryption fails
fscrypt: drop inode argument from fscrypt_get_ctx()
|
|
Pull block updates from Jens Axboe:
"Nothing major in this series, just fixes and improvements all over the
map. This contains:
- Series of fixes for sed-opal (David, Jonas)
- Fixes and performance tweaks for BFQ (via Paolo)
- Set of fixes for bcache (via Coly)
- Set of fixes for md (via Song)
- Enabling multi-page for passthrough requests (Ming)
- Queue release fix series (Ming)
- Device notification improvements (Martin)
- Propagate underlying device rotational status in loop (Holger)
- Removal of mtip32xx trim support, which has been disabled for years
(Christoph)
- Improvement and cleanup of nvme command handling (Christoph)
- Add block SPDX tags (Christoph)
- Cleanup/hardening of bio/bvec iteration (Christoph)
- A few NVMe pull requests (Christoph)
- Removal of CONFIG_LBDAF (Christoph)
- Various little fixes here and there"
* tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block: (164 commits)
block: fix mismerge in bvec_advance
block: don't drain in-progress dispatch in blk_cleanup_queue()
blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release
blk-mq: always free hctx after request queue is freed
blk-mq: split blk_mq_alloc_and_init_hctx into two parts
blk-mq: free hw queue's resource in hctx's release handler
blk-mq: move cancel of requeue_work into blk_mq_release
blk-mq: grab .q_usage_counter when queuing request from plug code path
block: fix function name in comment
nvmet: protect discovery change log event list iteration
nvme: mark nvme_core_init and nvme_core_exit static
nvme: move command size checks to the core
nvme-fabrics: check more command sizes
nvme-pci: check more command sizes
nvme-pci: remove an unneeded variable initialization
nvme-pci: unquiesce admin queue on shutdown
nvme-pci: shutdown on timeout during deletion
nvme-pci: fix psdt field for single segment sgls
nvme-multipath: don't print ANA group state by default
nvme-multipath: split bios with the ns_head bio_set before submitting
...
|
|
We only have two callers that need the integer loop iterator, and they
can easily maintain it themselves.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Coly Li <colyli@suse.de>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The flags field in 'struct shash_desc' never actually does anything.
The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP.
However, no shash algorithm ever sleeps, making this flag a no-op.
With this being the case, inevitably some users who can't sleep wrongly
pass MAY_SLEEP. These would all need to be fixed if any shash algorithm
actually started sleeping. For example, the shash_ahash_*() functions,
which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP
from the ahash API to the shash API. However, the shash functions are
called under kmap_atomic(), so actually they're assumed to never sleep.
Even if it turns out that some users do need preemption points while
hashing large buffers, we could easily provide a helper function
crypto_shash_update_large() which divides the data into smaller chunks
and calls crypto_shash_update() and cond_resched() for each chunk. It's
not necessary to have a flag in 'struct shash_desc', nor is it necessary
to make individual shash algorithms aware of this at all.
Therefore, remove shash_desc::flags, and document that the
crypto_shash_*() functions can be called from any context.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Path lookups that traverse encrypted symlink(s) are very slow because
each encrypted symlink needs to be decrypted each time it's followed.
This also involves dropping out of rcu-walk mode.
Make encrypted symlinks faster by caching the decrypted symlink target
in ->i_link. The first call to fscrypt_get_symlink() sets it. Then,
the existing VFS path lookup code uses the non-NULL ->i_link to take the
fast path where ->get_link() isn't called, and lookups in rcu-walk mode
remain in rcu-walk mode.
Also set ->i_link immediately when a new encrypted symlink is created.
To safely free the symlink target after an RCU grace period has elapsed,
introduce a new function fscrypt_free_inode(), and make the relevant
filesystems call it just before actually freeing the inode.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
->lookup() in an encrypted directory begins as follows:
1. fscrypt_prepare_lookup():
a. Try to load the directory's encryption key.
b. If the key is unavailable, mark the dentry as a ciphertext name
via d_flags.
2. fscrypt_setup_filename():
a. Try to load the directory's encryption key.
b. If the key is available, encrypt the name (treated as a plaintext
name) to get the on-disk name. Otherwise decode the name
(treated as a ciphertext name) to get the on-disk name.
But if the key is concurrently added, it may be found at (2a) but not at
(1a). In this case, the dentry will be wrongly marked as a ciphertext
name even though it was actually treated as plaintext.
This will cause the dentry to be wrongly invalidated on the next lookup,
potentially causing problems. For example, if the racy ->lookup() was
part of sys_mount(), then the new mount will be detached when anything
tries to access it. This is despite the mountpoint having a plaintext
path, which should remain valid now that the key was added.
Of course, this is only possible if there's a userspace race. Still,
the additional kernel-side race is confusing and unexpected.
Close the kernel-side race by changing fscrypt_prepare_lookup() to also
set the on-disk filename (step 2b), consistent with the d_flags update.
Fixes: 28b4c263961c ("ext4 crypto: revalidate dentry after adding or removing the key")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Plaintext dentries are always valid, so only set fscrypt_d_ops on
ciphertext dentries.
Besides marginally improved performance, this allows overlayfs to use an
fscrypt-encrypted upperdir, provided that all the following are true:
(1) The fscrypt encryption key is placed in the keyring before
mounting overlayfs, and remains while the overlayfs is mounted.
(2) The overlayfs workdir uses the same encryption policy.
(3) No dentries for the ciphertext names of subdirectories have been
created in the upperdir or workdir yet. (Since otherwise
d_splice_alias() will reuse the old dentry with ->d_op set.)
One potential use case is using an ephemeral encryption key to encrypt
all files created or changed by a container, so that they can be
securely erased ("crypto-shredded") after the container stops.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Close some race conditions where fscrypt allowed rename() and link() on
ciphertext dentries that had been looked up just prior to the key being
concurrently added. It's better to return -ENOKEY in this case.
This avoids doing the nonsensical thing of encrypting the names a second
time when searching for the actual on-disk dir entries. It also
guarantees that DCACHE_ENCRYPTED_NAME dentries are never rename()d, so
the dcache won't have support all possible combinations of moving
DCACHE_ENCRYPTED_NAME around during __d_move().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Make various improvements to fscrypt dentry revalidation:
- Don't try to handle the case where the per-directory key is removed,
as this can't happen without the inode (and dentries) being evicted.
- Flag ciphertext dentries rather than plaintext dentries, since it's
ciphertext dentries that need the special handling.
- Avoid doing unnecessary work for non-ciphertext dentries.
- When revalidating ciphertext dentries, try to set up the directory's
i_crypt_info to make sure the key is really still absent, rather than
invalidating all negative dentries as the previous code did. An old
comment suggested we can't do this for locking reasons, but AFAICT
this comment was outdated and it actually works fine.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
