| Age | Commit message (Collapse) | Author |
|---|
|
FSDAX and reflink can work together now, let's drop this warning.
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
I mistakenly turned off CONFIG_XFS_RT in the Kconfig file for arm64
variant of the djwong-wtf git branch. Unfortunately, it took me a good
hour to figure out that RT wasn't built because this is what got printed
to dmesg:
XFS (sda2): realtime geometry sanity check failed
XFS (sda2): Metadata corruption detected at xfs_sb_read_verify+0x170/0x190 [xfs], xfs_sb block 0x0
Whereas I would have expected:
XFS (sda2): Not built with CONFIG_XFS_RT
XFS (sda2): RT mount failed
The root cause of these problems is the conditional compilation of the
new functions xfs_validate_rtextents and xfs_compute_rextslog that I
introduced in the two commits listed below. The !RT versions of these
functions return false and 0, respectively, which causes primary
superblock validation to fail, which explains the first message.
Move the two functions to other parts of libxfs that are not
conditionally defined by CONFIG_XFS_RT and remove the broken stubs so
that validation works again.
Fixes: e14293803f4e ("xfs: don't allow overly small or large realtime volumes")
Fixes: a6a38f309afc ("xfs: make rextslog computation consistent with mkfs")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
In XFS_DAS_NODE_REMOVE_ATTR case, xfs_attr_mode_remove_attr() sets
filter to XFS_ATTR_INCOMPLETE. The filter is then reset in
xfs_attr_complete_op() if XFS_DA_OP_REPLACE operation is performed.
The filter is not reset though if XFS just removes the attribute
(args->value == NULL) with xfs_attr_defer_remove(). attr code goes
to XFS_DAS_DONE state.
Fix this by always resetting XFS_ATTR_INCOMPLETE filter. The replace
operation already resets this filter in anyway and others are
completed at this step hence don't need it.
Fixes: fdaf1bb3cafc ("xfs: ATTR_REPLACE algorithm with LARP enabled needs rework")
Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Recently xfs/513 started failing on my test machines testing "-o
ro,norecovery" mount options. This was being emitted in dmesg:
[ 9906.932724] XFS (pmem0): no-recovery mounts must be read-only.
Turns out, readonly mounts with the fsopen()/fsconfig() mount API
have been busted since day zero. It's only taken 5 years for debian
unstable to start using this "new" mount API, and shortly after this
I noticed xfs/513 had started to fail as per above.
The syscall trace is:
fsopen("xfs", FSOPEN_CLOEXEC) = 3
mount_setattr(-1, NULL, 0, NULL, 0) = -1 EINVAL (Invalid argument)
.....
fsconfig(3, FSCONFIG_SET_STRING, "source", "/dev/pmem0", 0) = 0
fsconfig(3, FSCONFIG_SET_FLAG, "ro", NULL, 0) = 0
fsconfig(3, FSCONFIG_SET_FLAG, "norecovery", NULL, 0) = 0
fsconfig(3, FSCONFIG_CMD_CREATE, NULL, NULL, 0) = -1 EINVAL (Invalid argument)
close(3) = 0
Showing that the actual mount instantiation (FSCONFIG_CMD_CREATE) is
what threw out the error.
During mount instantiation, we call xfs_fs_validate_params() which
does:
/* No recovery flag requires a read-only mount */
if (xfs_has_norecovery(mp) && !xfs_is_readonly(mp)) {
xfs_warn(mp, "no-recovery mounts must be read-only.");
return -EINVAL;
}
and xfs_is_readonly() checks internal mount flags for read only
state. This state is set in xfs_init_fs_context() from the
context superblock flag state:
/*
* Copy binary VFS mount flags we are interested in.
*/
if (fc->sb_flags & SB_RDONLY)
set_bit(XFS_OPSTATE_READONLY, &mp->m_opstate);
With the old mount API, all of the VFS specific superblock flags
had already been parsed and set before xfs_init_fs_context() is
called, so this all works fine.
However, in the brave new fsopen/fsconfig world,
xfs_init_fs_context() is called from fsopen() context, before any
VFS superblock have been set or parsed. Hence if we use fsopen(),
the internal XFS readonly state is *never set*. Hence anything that
depends on xfs_is_readonly() actually returning true for read only
mounts is broken if fsopen() has been used to mount the filesystem.
Fix this by moving this internal state initialisation to
xfs_fs_fill_super() before we attempt to validate the parameters
that have been set prior to the FSCONFIG_CMD_CREATE call being made.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Fixes: 73e5fff98b64 ("xfs: switch to use the new mount-api")
cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Pull xfs fix from Chandan Babu:
- Fix per-inode space accounting bug
* tag 'xfs-6.8-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix backwards logic in xfs_bmap_alloc_account
|
|
We're only allocating from the realtime device if the inode is marked
for realtime and we're /not/ allocating into the attr fork.
Fixes: 58643460546d ("xfs: also use xfs_bmap_btalloc_accounting for RT allocations")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"To help make the move of sysctls out of kernel/sysctl.c not incur a
size penalty sysctl has been changed to allow us to not require the
sentinel, the final empty element on the sysctl array. Joel Granados
has been doing all this work.
In the v6.6 kernel we got the major infrastructure changes required to
support this. For v6.7 we had all arch/ and drivers/ modified to
remove the sentinel. For v6.8-rc1 we get a few more updates for fs/
directory only.
The kernel/ directory is left but we'll save that for v6.9-rc1 as
those patches are still being reviewed. After that we then can expect
also the removal of the no longer needed check for procname == NULL.
Let us recap the purpose of this work:
- this helps reduce the overall build time size of the kernel and run
time memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move
sysctls out from kernel/sysctl.c to their own files
Thomas Weißschuh also sent a few cleanups, for v6.9-rc1 we expect to
see further work by Thomas Weißschuh with the constificatin of the
struct ctl_table.
Due to Joel Granados's work, and to help bring in new blood, I have
suggested for him to become a maintainer and he's accepted. So for
v6.9-rc1 I look forward to seeing him sent you a pull request for
further sysctl changes. This also removes Iurii Zaikin as a maintainer
as he has moved on to other projects and has had no time to help at
all"
* tag 'sysctl-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: remove struct ctl_path
sysctl: delete unused define SYSCTL_PERM_EMPTY_DIR
coda: Remove the now superfluous sentinel elements from ctl_table array
sysctl: Remove the now superfluous sentinel elements from ctl_table array
fs: Remove the now superfluous sentinel elements from ctl_table array
cachefiles: Remove the now superfluous sentinel element from ctl_table array
sysclt: Clarify the results of selftest run
sysctl: Add a selftest for handling empty dirs
sysctl: Fix out of bounds access for empty sysctl registers
MAINTAINERS: Add Joel Granados as co-maintainer for proc sysctl
MAINTAINERS: remove Iurii Zaikin from proc sysctl
|
|
Pull xfs updates from Chandan Babu:
"New features/functionality:
- Online repair:
- Reserve disk space for online repairs
- Fix misinteraction between the AIL and btree bulkloader because
of which the bulk load fails to queue a buffer for writeback if
it happens to be on the AIL list
- Prevent transaction reservation overflows when reaping blocks
during online repair
- Whenever possible, bulkloader now copies multiple records into
a block
- Support repairing of
1. Per-AG free space, inode and refcount btrees
2. Ondisk inodes
3. File data and attribute fork mappings
- Verify the contents of
1. Inode and data fork of realtime bitmap file
2. Quota files
- Introduce MF_MEM_PRE_REMOVE. This will be used to notify tasks
about a pmem device being removed
Bug fixes:
- Fix memory leak of recovered attri intent items
- Fix UAF during log intent recovery
- Fix realtime geometry integer overflows
- Prevent scrub from live locking in xchk_iget
- Prevent fs shutdown when removing files during low free disk space
- Prevent transaction reservation overflow when extending an RT
device
- Prevent incorrect warning from being printed when extending a
filesystem
- Fix an off-by-one error in xreap_agextent_binval
- Serialize access to perag radix tree during deletion operation
- Fix perag memory leak during growfs
- Allow allocation of minlen realtime extent when the maximum sized
realtime free extent is minlen in size
Cleanups:
- Remove duplicate boilerplate code spread across functionality
associated with different log items
- Cleanup resblks interfaces
- Pass defer ops pointer to defer helpers instead of an enum
- Initialize di_crc in xfs_log_dinode to prevent KMSAN warnings
- Use static_assert() instead of BUILD_BUG_ON_MSG() to validate size
of structures and structure member offsets. This is done in order
to be able to share the code with userspace
- Move XFS documentation under a new directory specific to XFS
- Do not invoke deferred ops' ->create_done callback if the deferred
operation does not have an intent item associated with it
- Remove duplicate inclusion of header files from scrub/health.c
- Refactor Realtime code
- Cleanup attr code"
* tag 'xfs-6.8-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (123 commits)
xfs: use the op name in trace_xlog_intent_recovery_failed
xfs: fix a use after free in xfs_defer_finish_recovery
xfs: turn the XFS_DA_OP_REPLACE checks in xfs_attr_shortform_addname into asserts
xfs: remove xfs_attr_sf_hdr_t
xfs: remove struct xfs_attr_shortform
xfs: use xfs_attr_sf_findname in xfs_attr_shortform_getvalue
xfs: remove xfs_attr_shortform_lookup
xfs: simplify xfs_attr_sf_findname
xfs: move the xfs_attr_sf_lookup tracepoint
xfs: return if_data from xfs_idata_realloc
xfs: make if_data a void pointer
xfs: fold xfs_rtallocate_extent into xfs_bmap_rtalloc
xfs: simplify and optimize the RT allocation fallback cascade
xfs: reorder the minlen and prod calculations in xfs_bmap_rtalloc
xfs: remove XFS_RTMIN/XFS_RTMAX
xfs: remove rt-wrappers from xfs_format.h
xfs: factor out a xfs_rtalloc_sumlevel helper
xfs: tidy up xfs_rtallocate_extent_exact
xfs: merge the calls to xfs_rtallocate_range in xfs_rtallocate_block
xfs: reflow the tail end of xfs_rtallocate_extent_block
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs super updates from Christian Brauner:
"This contains the super work for this cycle including the long-awaited
series by Jan to make it possible to prevent writing to mounted block
devices:
- Writing to mounted devices is dangerous and can lead to filesystem
corruption as well as crashes. Furthermore syzbot comes with more
and more involved examples how to corrupt block device under a
mounted filesystem leading to kernel crashes and reports we can do
nothing about. Add tracking of writers to each block device and a
kernel cmdline argument which controls whether other writeable
opens to block devices open with BLK_OPEN_RESTRICT_WRITES flag are
allowed.
Note that this effectively only prevents modification of the
particular block device's page cache by other writers. The actual
device content can still be modified by other means - e.g. by
issuing direct scsi commands, by doing writes through devices lower
in the storage stack (e.g. in case loop devices, DM, or MD are
involved) etc. But blocking direct modifications of the block
device page cache is enough to give filesystems a chance to perform
data validation when loading data from the underlying storage and
thus prevent kernel crashes.
Syzbot can use this cmdline argument option to avoid uninteresting
crashes. Also users whose userspace setup does not need writing to
mounted block devices can set this option for hardening. We expect
that this will be interesting to quite a few workloads.
Btrfs is currently opted out of this because they still haven't
merged patches we require for this to work from three kernel
releases ago.
- Reimplement block device freezing and thawing as holder operations
on the block device.
This allows us to extend block device freezing to all devices
associated with a superblock and not just the main device. It also
allows us to remove get_active_super() and thus another function
that scans the global list of superblocks.
Freezing via additional block devices only works if the filesystem
chooses to use @fs_holder_ops for these additional devices as well.
That currently only includes ext4 and xfs.
Earlier releases switched get_tree_bdev() and mount_bdev() to use
@fs_holder_ops. The remaining nilfs2 open-coded version of
mount_bdev() has been converted to rely on @fs_holder_ops as well.
So block device freezing for the main block device will continue to
work as before.
There should be no regressions in functionality. The only special
case is btrfs where block device freezing for the main block device
never worked because sb->s_bdev isn't set. Block device freezing
for btrfs can be fixed once they can switch to @fs_holder_ops but
that can happen whenever they're ready"
* tag 'vfs-6.8.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (27 commits)
block: Fix a memory leak in bdev_open_by_dev()
super: don't bother with WARN_ON_ONCE()
super: massage wait event mechanism
ext4: Block writes to journal device
xfs: Block writes to log device
fs: Block writes to mounted block devices
btrfs: Do not restrict writes to btrfs devices
block: Add config option to not allow writing to mounted devices
block: Remove blkdev_get_by_*() functions
bcachefs: Convert to bdev_open_by_path()
fs: handle freezing from multiple devices
fs: remove dead check
nilfs2: simplify device handling
fs: streamline thaw_super_locked
ext4: simplify device handling
xfs: simplify device handling
fs: simplify setup_bdev_super() calls
blkdev: comment fs_holder_ops
porting: document block device freeze and thaw changes
fs: remove unused helper
...
|
|
Instead of tracing the address of the recovery handler, use the name
in the defer op, similar to other defer ops related tracepoints.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
dfp will be freed by ->recover_work and thus the tracepoint in case
of an error can lead to a use after free.
Store the defer ops in a local variable to avoid that.
Fixes: 7f2f7531e0d4 ("xfs: store an ops pointer in struct xfs_defer_pending")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
asserts
Since commit deed9512872d ("xfs: Check for -ENOATTR or -EEXIST"), the
high-level attr code does a lookup for any attr we're trying to set,
and does the checks to handle the create vs replace cases, which thus
never hit the low-level attr code.
Turn the checks in xfs_attr_shortform_addname as they must never trip.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Remove the last two users of the typedef.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
sparse complains about struct xfs_attr_shortform because it embeds a
structure with a variable sized array in a variable sized array.
Given that xfs_attr_shortform is not a very useful structure, and the
dir2 equivalent has been removed a long time ago, remove it as well.
Provide a xfs_attr_sf_firstentry helper that returns the first
xfs_attr_sf_entry behind a xfs_attr_sf_hdr to replace the structure
dereference.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_attr_shortform_getvalue duplicates the logic in xfs_attr_sf_findname.
Use the helper instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_attr_shortform_lookup is only used by xfs_attr_shortform_addname,
which is much better served by calling xfs_attr_sf_findname. Switch
it over and remove xfs_attr_shortform_lookup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_attr_sf_findname has the simple job of finding a xfs_attr_sf_entry in
the attr fork, but the convoluted calling convention obfuscates that.
Return the found entry as the return value instead of an pointer
argument, as the -ENOATTR/-EEXIST can be trivally derived from that, and
remove the basep argument, as it is equivalent of the offset of sfe in
the data for if an sfe was found, or an offset of totsize if not was
found. To simplify the totsize computation add a xfs_attr_sf_endptr
helper that returns the imaginative xfs_attr_sf_entry at the end of
the current attrs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
trace_xfs_attr_sf_lookup is currently only called by
xfs_attr_shortform_lookup, which despit it's name is a simple helper for
xfs_attr_shortform_addname, which has it's own tracing. Move the
callsite to xfs_attr_shortform_getvalue, which is the closest thing to
a high level lookup we have for the Linux xattr API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Many of the xfs_idata_realloc callers need to set a local pointer to the
just reallocated if_data memory. Return the pointer to simplify them a
bit and use the opportunity to re-use krealloc for freeing if_data if the
size hits 0.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
The xfs_ifork structure currently has a union of the if_root void pointer
and the if_data char pointer. In either case it is an opaque pointer
that depends on the fork format. Replace the union with a single if_data
void pointer as that is what almost all callers want. Only the symlink
NULL termination code in xfs_init_local_fork actually needs a new local
variable now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove sentinel elements ctl_table struct. Special attention was placed in
making sure that an empty directory for fs/verity was created when
CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not defined. In this case we use the
register sysctl call that expects a size.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
There isn't really much left in xfs_rtallocate_extent now, fold it into
the only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
There are currently multiple levels of fall back if an RT allocation
can not be satisfied:
1) xfs_rtallocate_extent extends the minlen and reduces the maxlen due
to the extent size hint. If that can't be done, it return -ENOSPC
and let's xfs_bmap_rtalloc retry, which then not only drops the
extent size hint based alignment, but also the minlen adjustment
2) if xfs_rtallocate_extent gets -ENOSPC from the underlying functions,
it only drops the extent size hint based alignment and retries
3) if that still does not succeed, xfs_rtallocate_extent drops the
extent size hint (which is a complex no-op at this point) and the
minlen using the same code as (1) above
4) if that still doesn't success and the caller wanted an allocation
near a blkno, drop that blkno hint.
The handling in 1 is rather inefficient as we could just drop the
alignment and continue, and 2/3 interact in really weird ways due to
the duplicate policy.
Move aligning the min and maxlen out of xfs_rtallocate_extent and into
a helper called directly by xfs_bmap_rtalloc. This allows just
continuing with the allocation if we have to drop the alignment instead
of going through the retry loop and also dropping the perfectly usable
minlen adjustment that didn't cause the problem, and then just use
a single retry that drops both the minlen and alignment requirement
when we really are out of space, thus consolidating cases (2) and (3)
above.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_bmap_rtalloc is a bit of a mess in terms of calculating the locally
need variables. Reorder them a bit so that related code is located
next to each other - the raminlen calculation moves up next to where
the maximum len is calculated, and all the prod calculation is move
into a single place and rearranged so that the real prod calculation
only happens when it actually is needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Use the kernel min/max helpers instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_format.h has a bunch odd wrappers for helper functions and mount
structure access using RT* prefixes. Replace them with their open coded
versions (for those that weren't entirely unused) and remove the wrappers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_rtallocate_extent_size has two loops with nearly identical logic
in them. Split that logic into a separate xfs_rtalloc_sumlevel helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Use common code for both xfs_rtallocate_range calls by moving
the !isfree logic into the non-default branch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Use a goto to use a common tail for the case of being able to allocate
an extent.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Change polarity of a check so that the successful case of being able to
allocate an extent is in the main path of the function and error handling
is on a branch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Doing a break in the else side of a conditional is rather silly. Invert
the check, break ASAP and unindent the other leg.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Inline the logic of xfs_rtmodify_summary_int into xfs_rtmodify_summary
and xfs_rtget_summary instead of having a somewhat awkward helper to
share a little bit of code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_rtmodify_summary_int is only used inside xfs_rtbitmap.c and to
implement xfs_rtget_summary. Move xfs_rtget_summary to xfs_rtbitmap.c
as the exported API and mark xfs_rtmodify_summary_int static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Clean up the logical in xfs_bmap_rtalloc that tries to find a rtextent
to start the search from by using a separate variable for the hint, not
calling xfs_bmap_adjacent when we want to ignore the locality and avoid
an extra roundtrip converting between block numbers and RT extent
numbers.
As a side-effect this doesn't pointlessly call xfs_rtpick_extent and
increment the start rtextent hint if we are going to ignore the result
anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Add a return value to xfs_bmap_adjacent to indicate if it did change
ap->blkno or not.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Reorder the tail end of xfs_bmap_rtalloc so that the successfully
allocation is in the main path, and the error handling is on a branch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Just return -ENOSPC instead of returning 0 and setting the return rt
extent number to NULLRTEXTNO. This is turn removes all users of
NULLRTEXTNO, so remove that as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_bmap_rtalloc is currently in xfs_bmap_util.c, which is a somewhat
odd spot for it, given that is only called from xfs_bmap.c and calls
into xfs_rtalloc.c to do the actual work. Move xfs_bmap_rtalloc to
xfs_rtalloc.c and mark xfs_rtpick_extent xfs_rtallocate_extent and
xfs_rtallocate_extent static now that they aren't called from outside
of xfs_rtalloc.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Make xfs_bmap_btalloc_accounting more generic by handling the RT quota
reservations and then also use it from xfs_bmap_rtalloc instead of
open coding the accounting logic there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_bmap_btalloc_accounting only uses the len field from args, but that
has just been propagated to ap->length field by the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Without this upcoming change can cause an unused variable warning,
when adding a local variable for the fields field passed to it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
minlen is the lower bound on the extent length that the caller can
accept, and maxlen is at this point the maximal available length.
This means a minlen extent is perfectly fine to use, so do it. This
matches the equivalent logic in xfs_rtallocate_extent_exact that also
accepts a minlen sized extent.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
remove the second ones:
\#include "xfs_trans_resv.h"
\#include "xfs_mount.h"
Signed-off-by: Wang Jinchao <wangjinchao@xfusion.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
During growfs, if new ag in memory has been initialized, however
sb_agcount has not been updated, if an error occurs at this time it
will cause perag leaks as follows, these new AGs will not been freed
during umount , because of these new AGs are not visible(that is
included in mp->m_sb.sb_agcount).
unreferenced object 0xffff88810be40200 (size 512):
comm "xfs_growfs", pid 857, jiffies 4294909093
hex dump (first 32 bytes):
00 c0 c1 05 81 88 ff ff 04 00 00 00 00 00 00 00 ................
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 381741e2):
[<ffffffff8191aef6>] __kmalloc+0x386/0x4f0
[<ffffffff82553e65>] kmem_alloc+0xb5/0x2f0
[<ffffffff8238dac5>] xfs_initialize_perag+0xc5/0x810
[<ffffffff824f679c>] xfs_growfs_data+0x9bc/0xbc0
[<ffffffff8250b90e>] xfs_file_ioctl+0x5fe/0x14d0
[<ffffffff81aa5194>] __x64_sys_ioctl+0x144/0x1c0
[<ffffffff83c3d81f>] do_syscall_64+0x3f/0xe0
[<ffffffff83e00087>] entry_SYSCALL_64_after_hwframe+0x62/0x6a
unreferenced object 0xffff88810be40800 (size 512):
comm "xfs_growfs", pid 857, jiffies 4294909093
hex dump (first 32 bytes):
20 00 00 00 00 00 00 00 57 ef be dc 00 00 00 00 .......W.......
10 08 e4 0b 81 88 ff ff 10 08 e4 0b 81 88 ff ff ................
backtrace (crc bde50e2d):
[<ffffffff8191b43a>] __kmalloc_node+0x3da/0x540
[<ffffffff81814489>] kvmalloc_node+0x99/0x160
[<ffffffff8286acff>] bucket_table_alloc.isra.0+0x5f/0x400
[<ffffffff8286bdc5>] rhashtable_init+0x405/0x760
[<ffffffff8238dda3>] xfs_initialize_perag+0x3a3/0x810
[<ffffffff824f679c>] xfs_growfs_data+0x9bc/0xbc0
[<ffffffff8250b90e>] xfs_file_ioctl+0x5fe/0x14d0
[<ffffffff81aa5194>] __x64_sys_ioctl+0x144/0x1c0
[<ffffffff83c3d81f>] do_syscall_64+0x3f/0xe0
[<ffffffff83e00087>] entry_SYSCALL_64_after_hwframe+0x62/0x6a
Factor out xfs_free_unused_perag_range() from xfs_initialize_perag(),
used for freeing unused perag within a specified range in error handling,
included in the error path of the growfs failure.
Fixes: 1c1c6ebcf528 ("xfs: Replace per-ag array with a radix tree")
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Take mp->m_perag_lock for deletions from the perag radix tree in
xfs_initialize_perag to prevent racing with tagging operations.
Lookups are fine - they are RCU protected so already deal with the
tree changing shape underneath the lookup - but tagging operations
require the tree to be stable while the tags are propagated back up
to the root.
Right now there's nothing stopping radix tree tagging from operating
while a growfs operation is progress and adding/removing new entries
into the radix tree.
Hence we can have traversals that require a stable tree occurring at
the same time we are removing unused entries from the radix tree which
causes the shape of the tree to change.
Likely this hasn't caused a problem in the past because we are only
doing append addition and removal so the active AG part of the tree
is not changing shape, but that doesn't mean it is safe. Just making
the radix tree modifications serialise against each other is obviously
correct.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Fix anything that causes the quota verifiers to fail.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Upon a closer inspection of the quota record scrubber, I noticed that
dqiterate wasn't actually walking all possible dquots for the mapped
blocks in the quota file. This is due to xfs_qm_dqget_next skipping all
XFS_IS_DQUOT_UNINITIALIZED dquots.
For a fsck program, we really want to look at all the dquots, even if
all counters and limits in the dquot record are zero. Rewrite the
implementation to do this, as well as switching to an iterator paradigm
to reduce the number of indirect calls.
This enables removal of the old broken dqiterate code from xfs_dquot.c.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
For each dquot resource, ensure either (a) the resource usage is over
the soft limit and there is a nonzero timer; or (b) usage is at or under
the soft limit and the timer is unset. (a) is redundant with the dquot
buffer verifier, but (b) isn't checked anywhere.
Found by fuzzing xfs/426 and noticing that diskdq.btimer = add didn't
trip any kind of warning for having a timer set even with no limits.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Each xfs_dquot object caches the file offset and daddr of the ondisk
block that backs the dquot. Make sure these cached values are the same
as the bmapi data, and that the block state is written.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
