Age | Commit message (Collapse) | Author |
|
We don't post CQEs from the IRQ context, add a check catching that.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f23f7a24dbe8027b3d37873fece2b6488f878b31.1681210788.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Every task_work will try to wake the task to be executed, which causes
excessive scheduling and additional overhead. For some tw it's
justified, but others won't do much but post a single CQE.
When a task waits for multiple cqes, every such task_work will wake it
up. Instead, the task may give a hint about how many cqes it waits for,
io_req_local_work_add() will compare against it and skip wake ups
if #cqes + #tw is not enough to satisfy the waiting condition. Task_work
that uses the optimisation should be simple enough and never post more
than one CQE. It's also ignored for non DEFER_TASKRUN rings.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d2b77e99d1e86624d8a69f7037d764b739dcd225.1680782017.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We pass 'allow_local' into io_req_task_work_add() but will need more
flags. Replace it with a flags bit field and name this allow_local
flag.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4c0f01e7ef4e6feebfb199093cc995af7a19befa.1680782017.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of smp_mb() + __io_cqring_wake() in __io_cq_unlock_post_flush()
use equivalent io_cqring_wake(). With that we can clean it up further
and remove __io_cqring_wake().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/662ee5d898168ac206be06038525e97b64072a46.1680782017.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We already do this manually for the !SQPOLL case, do it in general and
we can also dump the ugly min3() in io_submit_sqes().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For task works we're passing around a bool pointer for whether the
current ring is locked or not, let's wrap it in a structure, that
will make it more opaque preventing abuse and will also help us
to pass more info in the future if needed.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1ecec9483d58696e248d1bfd52cf62b04442df1d.1679931367.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just like for task_work, set the task mode to TASK_RUNNING before doing
any potential resume work. We're not holding any locks at this point,
but we may have already set the task state to TASK_INTERRUPTIBLE in
preparation for going to sleep waiting for events. Ensure that we set it
back to TASK_RUNNING if we have work to process, to avoid warnings on
calling blocking operations with !TASK_RUNNING.
Fixes: b5d3ae202fbf ("io_uring: handle TIF_NOTIFY_RESUME when checking for task_work")
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202302062208.24d3e563-oliver.sang@intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Follow the io_get_sqe pattern returning the result via a pointer
and hide request cache refill inside io_alloc_req().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8c37c2e8a3cb5e4cd6a8ae3b91371227a92708a6.1674484266.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Every io_uring request is represented by struct io_kiocb, which is
cached locally by io_uring (not SLAB/SLUB) in the list called
submit_state.freelist. This patch simply enabled KASAN for this free
list.
This list is initially created by KMEM_CACHE, but later, managed by
io_uring. This patch basically poisons the objects that are not used
(i.e., they are the free list), and unpoisons it when the object is
allocated/removed from the list.
Touching these poisoned objects while in the freelist will cause a KASAN
warning.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If TIF_NOTIFY_RESUME is set, then we need to call resume_user_mode_work()
for PF_IO_WORKER threads. They never return to usermode, hence never get
a chance to process any items that are marked by this flag. Most notably
this includes the final put of files, but also any throttling markers set
by block cgroups.
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_put_task() is only used in uring.c so enclose it there together with
__io_put_task().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/43c7f9227e2ab215f1a6069dadbc5382bed346fe.1673887636.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Even though io_poll_wq_wake()'s waitqueue_active reuses a barrier we do
for another waitqueue, it's not going to be the case in the future and
so we want to have a fast path for it when the ring has never been
polled.
Move poll_wq wake ups into __io_commit_cqring_flush() using a new flag
called ->poll_activated. The idea behind the flag is to set it when the
ring was polled for the first time. This requires additional sync to not
miss events, which is done here by using task_work for ->task_complete
rings, and by default enabling the flag for all other types of rings.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/060785e8e9137a920b232c0c7f575b131af19cac.1673274244.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't use ->cq_wait for ring polling but add a separate wait queue for
it. We need it for following patches.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/dea0be0bf990503443c5c6c337fc66824af7d590.1673274244.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_run_local_work_locked() is only used in io_uring.c, move it there.
With that we can also make __io_run_local_work() static.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/91757bcb33e5774e49fed6f2b6e058630608119b.1673274244.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_run_local_work is enclosed in io_uring.c, we don't need to export it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b477fb81f5e77044f724a06fe245d5c078659364.1673274244.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Most places that want to run local tw explicitly and in advance check if
they are allowed to do so. Don't rely on a similar check in
__io_run_local_work(), leave it as a just-in-case warning and make sure
callers checks capabilities themselves.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/990fe0e8e70fd4d57e43625e5ce8fba584821d1a.1672916894.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is only one user of io_run_task_work_ctx(), inline it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/40953c65f7c88fb00cdc4d870ca5d5319fb3d7ea.1672916894.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There should be nothing in the ->work_llist for non DEFER_TASKRUN rings,
so we can skip flag checks and test the list emptiness directly. Also
move it out of io_run_local_work() for inlining.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/331d63fd15ca79b35b95c82a82d9246110686392.1672916894.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Locking around CQE posting is complex and depends on options the ring is
created with, add more thorough lockdep annotations checking all
invariants.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/aa3770b4eacae3915d782cc2ab2f395a99b4b232.1672795976.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use task_work_pending() as a better test for whether we have task_work
or not, TIF_NOTIFY_SIGNAL is only valid if the any of the task_work
items had been queued with TWA_SIGNAL as the notification mechanism.
Hence task_work_pending() is a more reliable check.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_kill_timeouts() doesn't post any events but queues everything to
task_work. Locking there is needed for protecting linked requests
traversing, we should grab completion_lock directly instead of using
io_cq_[un]lock helpers. Same goes for __io_req_find_next_prep().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/88e75d481a65dc295cb59722bb1cf76402d1c06b.1670002973.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
->task_complete was added to serialised CQE posting by doing it from
the task context only (or fallback wq when the task is dead), and now we
can use that to avoid taking ->completion_lock while filling CQ entries.
The patch skips spinlocking only in two spots,
__io_submit_flush_completions() and flushing in io_aux_cqe, it's safer
and covers all cases we care about. Extra care is taken to force taking
the lock while queueing overflow entries.
It fundamentally relies on SINGLE_ISSUER to have only one task posting
events. It also need to take into account overflowed CQEs, flushing of
which happens in the cq wait path, and so this implementation also needs
DEFER_TASKRUN to limit waiters. For the same reason we disable it for
SQPOLL, and for IOPOLL as it won't benefit from it in any case.
DEFER_TASKRUN, SQPOLL and IOPOLL requirement may be relaxed in the
future.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2a8c91fd82cfcdcc1d2e5bac7051fe2c183bda73.1670384893.git.asml.silence@gmail.com
[axboe: modify to apply]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is one newly added place when we lock ring with io_cq_lock() but
unlocking is hand coded calling spin_unlock directly. It's ugly and
troublesome in the long run. Make it consistent with the other completion
locking.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4ca4f0564492b90214a190cd5b2a6c76522de138.1669821213.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
* for-6.2/io_uring: (41 commits)
io_uring: keep unlock_post inlined in hot path
io_uring: don't use complete_post in kbuf
io_uring: spelling fix
io_uring: remove io_req_complete_post_tw
io_uring: allow multishot polled reqs to defer completion
io_uring: remove overflow param from io_post_aux_cqe
io_uring: add lockdep assertion in io_fill_cqe_aux
io_uring: make io_fill_cqe_aux static
io_uring: add io_aux_cqe which allows deferred completion
io_uring: allow defer completion for aux posted cqes
io_uring: defer all io_req_complete_failed
io_uring: always lock in io_apoll_task_func
io_uring: remove iopoll spinlock
io_uring: iopoll protect complete_post
io_uring: inline __io_req_complete_put()
io_uring: remove io_req_tw_post_queue
io_uring: use io_req_task_complete() in timeout
io_uring: hold locks for io_req_complete_failed
io_uring: add completion locking for iopoll
io_uring: kill io_cqring_ev_posted() and __io_cq_unlock_post()
...
|
|
With how task_work is added and signaled, we can have TIF_NOTIFY_SIGNAL
set and no task_work pending as it got run in a previous loop. Treat
TIF_NOTIFY_SIGNAL like get_signal(), always clear it if set regardless
of whether or not task_work is pending to run.
Cc: stable@vger.kernel.org
Fixes: 46a525e199e4 ("io_uring: don't gate task_work run on TIF_NOTIFY_SIGNAL")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's only used in one place. Inline it.
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221125103412.1425305-2-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The only call sites which would not allow overflow are also call sites
which would use the io_aux_cqe as they care about ordering.
So remove this parameter from io_post_aux_cqe.
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221124093559.3780686-9-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is only used in io_uring.c
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221124093559.3780686-7-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the just introduced deferred post cqe completion state when possible
in io_aux_cqe. If not possible fallback to io_post_aux_cqe.
This introduces a complication because of allow_overflow. For deferred
completions we cannot know without locking the completion_lock if it will
overflow (and even if we locked it, another post could sneak in and cause
this cqe to be in overflow).
However since overflow protection is mostly a best effort defence in depth
to prevent infinite loops of CQEs for poll, just checking the overflow bit
is going to be good enough and will result in at most 16 (array size of
deferred cqes) overflows.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221124093559.3780686-6-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All failures happen under lock now, and can be deferred. To be consistent
when the failure has happened after some multishot cqe has been
deferred (and keep ordering), always defer failures.
To make this obvious at the caller (and to help prevent a future bug)
rename io_req_complete_failed to io_req_defer_failed.
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221124093559.3780686-4-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_req_complete_post() may be used by iopoll enabled rings, grab locks
in this case. That requires to pass issue_flags to propagate the locking
state.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/cc6d854065c57c838ca8e8806f707a226b70fd2d.1669203009.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove io_req_tw_post() and io_req_tw_post_queue(), we can use
io_req_task_complete() instead.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b9b73c08022c7f1457023ac841f35c0100e70345.1669203009.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass in EPOLL_URING_WAKE when signaling eventfd or doing poll related
wakups, so that we can check for a circular event dependency between
eventfd and epoll. If this flag is set when our wakeup handlers are
called, then we know we have a dependency that needs to terminate
multishot requests.
eventfd and epoll are the only such possible dependencies.
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is only one user of __io_req_complete_post(), inline it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ef4c9059950a3da5cf68df00f977f1fd13bd9306.1668597569.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
__io_req_task_work_add() is huge but marked inline, that makes compilers
to generate lots of garbage. Inline the wrapper caller
io_req_task_work_add() instead.
before and after:
text data bss dec hex filename
47347 16248 8 63603 f873 io_uring/io_uring.o
text data bss dec hex filename
45303 16248 8 61559 f077 io_uring/io_uring.o
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/26dc8c28ca0160e3269ef3e55c5a8b917c4d4450.1668162751.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Having REQ_F_POLLED set doesn't guarantee that the request is
executed as a multishot from the polling path. Fortunately for us, if
the code thinks it's multishot issue when it's not, it can only ask to
skip completion so leaking the request. Use issue_flags to mark
multipoll issues.
Cc: stable@vger.kernel.org
Fixes: 390ed29b5e425 ("io_uring: add IORING_ACCEPT_MULTISHOT for accept")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7700ac57653f2823e30b34dc74da68678c0c5f13.1668710222.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It is possible for tw to lock the ring, and this was not propogated out to
io_run_local_work. This can cause an unlock to be missed.
Instead pass a pointer to locked into __io_run_local_work.
Fixes: 8ac5d85a89b4 ("io_uring: add local task_work run helper that is entered locked")
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221027144429.3971400-3-dylany@meta.com
[axboe: WARN_ON() -> WARN_ON_ONCE() and add a minor comment]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Running local task_work requires taking uring_lock, for submit + wait we
can try to run them right after submit while we still hold the lock and
save one lock/unlokc pair. The optimisation was implemented in the first
local tw patches but got dropped for simplicity.
Suggested-by: Dylan Yudaken <dylany@fb.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/281fc79d98b5d91fe4778c5137a17a2ab4693e5c.1665088876.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_cqring_wake() needs a barrier for the waitqueue_active() check.
However, in the case of io_req_local_work_add(), we call llist_add()
first, which implies an atomic. Hence we can replace smb_mb() with
smp_mb__after_atomic().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/43983bc8bc507172adda7a0f00cab1aff09fd238.1665018309.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This isn't a reliable mechanism to tell if we have task_work pending, we
really should be looking at whether we have any items queued. This is
problematic if forward progress is gated on running said task_work. One
such example is reading from a pipe, where the write side has been closed
right before the read is started. The fput() of the file queues TWA_RESUME
task_work, and we need that task_work to be run before ->release() is
called for the pipe. If ->release() isn't called, then the read will sit
forever waiting on data that will never arise.
Fix this by io_run_task_work() so it checks if we have task_work pending
rather than rely on TIF_NOTIFY_SIGNAL for that. The latter obviously
doesn't work for task_work that is queued without TWA_SIGNAL.
Reported-by: Christiano Haesbaert <haesbaert@haesbaert.org>
Cc: stable@vger.kernel.org
Link: https://github.com/axboe/liburing/issues/665
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Overflowing CQEs may result in reordering, which is buggy in case of
links, F_MORE and so on. If we guarantee that we don't reorder for
the unlikely event of a CQ ring overflow, then we can further extend
this to not have to terminate multishot requests if it happens. For
other operations, like zerocopy sends, we have no choice but to honor
CQE ordering.
Reported-by: Dylan Yudaken <dylany@fb.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ec3bc55687b0768bbe20fb62d7d06cfced7d7e70.1663892031.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We try to restrict CQ waiters when IORING_SETUP_DEFER_TASKRUN is set,
but if nothing has been submitted yet it'll allow any waiter, which
violates the contract.
Fixes: c0e0d6ba25f1 ("io_uring: add IORING_SETUP_DEFER_TASKRUN")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/b4f0d3f14236d7059d08c5abe2661ef0b78b5528.1662652536.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In case of DEFER_TASK_WORK we try to restrict waiters to only one task,
which is also the only submitter; however, we don't do it reliably,
which might be very confusing and backfire in the future. E.g. we
currently allow multiple tasks in io_iopoll_check().
Fixes: c0e0d6ba25f1 ("io_uring: add IORING_SETUP_DEFER_TASKRUN")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/94c83c0a7fe468260ee2ec31bdb0095d6e874ba2.1662652536.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Combine the two checks we have for task_work running and whether or not
we need to shuffle the mutex into one, so we unify how task_work is run
in the iopoll loop. This helps ensure that local task_work is run when
needed, and also optimizes that path to avoid a mutex shuffle if it's
not needed.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We have a few spots that drop the mutex just to run local task_work,
which immediately tries to grab it again. Add a helper that just passes
in whether we're locked already.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Allow deferring async tasks until the user calls io_uring_enter(2) with
the IORING_ENTER_GETEVENTS flag. Enable this mode with a flag at
io_uring_setup time. This functionality requires that the later
io_uring_enter will be called from the same submission task, and therefore
restrict this flag to work only when IORING_SETUP_SINGLE_ISSUER is also
set.
Being able to hand pick when tasks are run prevents the problem where
there is current work to be done, however task work runs anyway.
For example, a common workload would obtain a batch of CQEs, and process
each one. Interrupting this to additional taskwork would add latency but
not gain anything. If instead task work is deferred to just before more
CQEs are obtained then no additional latency is added.
The way this is implemented is by trying to keep task work local to a
io_ring_ctx, rather than to the submission task. This is required, as the
application will want to wake up only a single io_ring_ctx at a time to
process work, and so the lists of work have to be kept separate.
This has some other benefits like not having to check the task continually
in handle_tw_list (and potentially unlocking/locking those), and reducing
locks in the submit & process completions path.
There are networking cases where using this option can reduce request
latency by 50%. For example a contrived example using [1] where the client
sends 2k data and receives the same data back while doing some system
calls (to trigger task work) shows this reduction. The reason ends up
being that if sending responses is delayed by processing task work, then
the client side sits idle. Whereas reordering the sends first means that
the client runs it's workload in parallel with the local task work.
[1]:
Using https://github.com/DylanZA/netbench/tree/defer_run
Client:
./netbench --client_only 1 --control_port 10000 --host <host> --tx "epoll --threads 16 --per_thread 1 --size 2048 --resp 2048 --workload 1000"
Server:
./netbench --server_only 1 --control_port 10000 --rx "io_uring --defer_taskrun 0 --workload 100" --rx "io_uring --defer_taskrun 1 --workload 100"
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220830125013.570060-5-dylany@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We want to do request allocation out of the core io_uring code, make the
allocation functions public for other io_uring parts.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0314fedd3a02a514210ba42d4720332538c65956.1658913593.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Allow to flush notifiers as a part of sendzc request by setting
IORING_SENDZC_FLUSH flag. When the sendzc request succeedes it will
flush the used [active] notifier.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e0b4d9a6797e2fd6092824fe42953db7a519bbc8.1657643355.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add internal part of send zerocopy notifications. There are two main
structures, the first one is struct io_notif, which carries inside
struct ubuf_info and maps 1:1 to it. io_uring will be binding a number
of zerocopy send requests to it and ask to complete (aka flush) it. When
flushed and all attached requests and skbs complete, it'll generate one
and only one CQE. There are intended to be passed into the network layer
as struct msghdr::msg_ubuf.
The second concept is notification slots. The userspace will be able to
register an array of slots and subsequently addressing them by the index
in the array. Slots are independent of each other. Each slot can have
only one notifier at a time (called active notifier) but many notifiers
during the lifetime. When active, a notifier not going to post any
completion but the userspace can attach requests to it by specifying
the corresponding slot while issueing send zc requests. Eventually, the
userspace will want to "flush" the notifier losing any way to attach
new requests to it, however it can use the next atomatically added
notifier of this slot or of any other slot.
When the network layer is done with all enqueued skbs attached to a
notifier and doesn't need the specified in them user data, the flushed
notifier will post a CQE.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3ecf54c31a85762bf679b0a432c9f43ecf7e61cc.1657643355.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make io_put_task() available to non-core parts of io_uring, we'll need
it for notification infrastructure.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3686807d4c03b72e389947b0e8692d4d44334ef0.1657643355.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|