| Age | Commit message (Collapse) | Author |
|---|
|
Though tmpfs does not need it, percpu_counter_limited_add() can be twice
as useful if it works sensibly with negative amounts (subs) - typically
decrements towards a limit of 0 or nearby: as suggested by Dave Chinner.
And in the course of that reworking, skip the percpu counter sum if it is
already obvious that the limit would be passed: as suggested by Tim Chen.
Extend the comment above __percpu_counter_limited_add(), defining the
behaviour with positive and negative amounts, allowing negative limits,
but not bothering about overflow beyond S64_MAX.
Link: https://lkml.kernel.org/r/8f86083b-c452-95d4-365b-f16a2e4ebcd4@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Percpu counter's compare and add are separate functions: without locking
around them (which would defeat their purpose), it has been possible to
overflow the intended limit. Imagine all the other CPUs fallocating tmpfs
huge pages to the limit, in between this CPU's compare and its add.
I have not seen reports of that happening; but tmpfs's recent addition of
dquot_alloc_block_nodirty() in between the compare and the add makes it
even more likely, and I'd be uncomfortable to leave it unfixed.
Introduce percpu_counter_limited_add(fbc, limit, amount) to prevent it.
I believe this implementation is correct, and slightly more efficient than
the combination of compare and add (taking the lock once rather than twice
when nearing full - the last 128MiB of a tmpfs volume on a machine with
128 CPUs and 4KiB pages); but it does beg for a better design - when
nearing full, there is no new batching, but the costly percpu counter sum
across CPUs still has to be done, while locked.
Follow __percpu_counter_sum()'s example, including cpu_dying_mask as well
as cpu_online_mask: but shouldn't __percpu_counter_compare() and
__percpu_counter_limited_add() then be adding a num_dying_cpus() to
num_online_cpus(), when they calculate the maximum which could be held
across CPUs? But the times when it matters would be vanishingly rare.
Link: https://lkml.kernel.org/r/bb817848-2d19-bcc8-39ca-ea179af0f0b4@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Users complained about OOM errors during fork without triggering
compaction. This can be fixed by modifying the flags used in
mas_expected_entries() so that the compaction will be triggered in low
memory situations. Since mas_expected_entries() is only used during fork,
the extra argument does not need to be passed through.
Additionally, the two test_maple_tree test cases and one benchmark test
were altered to use the correct locking type so that allocations would not
trigger sleeping and thus fail. Testing was completed with lockdep atomic
sleep detection.
The additional locking change requires rwsem support additions to the
tools/ directory through the use of pthreads pthread_rwlock_t. With this
change test_maple_tree works in userspace, as a module, and in-kernel.
Users may notice that the system gave up early on attempting to start new
processes instead of attempting to reclaim memory.
Link: https://lkml.kernel.org/r/20230915093243epcms1p46fa00bbac1ab7b7dca94acb66c44c456@epcms1p4
Link: https://lkml.kernel.org/r/20231012155233.2272446-1-Liam.Howlett@oracle.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: <jason.sim@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When updating the maple tree iterator to avoid rewalks, an issue was
introduced when shifting beyond the limits. This can be seen by trying to
go to the previous address of 0, which would set the maple node to
MAS_NONE and keep the range as the last entry.
Subsequent calls to mas_find() would then search upwards from mas->last
and skip the value at mas->index/mas->last. This showed up as a bug in
mprotect which skips the actual VMA at the current range after attempting
to go to the previous VMA from 0.
Since MAS_NONE may already be set when searching for a value that isn't
contained within a node, changing the handling of MAS_NONE in mas_find()
would make the code more complicated and error prone. Furthermore, there
was no way to tell which limit was hit, and thus which action to take
(next or the entry at the current range).
This solution is to add two states to track what happened with the
previous iterator action. This allows for the expected behaviour of the
next command to return the correct item (either the item at the range
requested, or the next/previous).
Tests are also added and updated accordingly.
Link: https://lkml.kernel.org/r/20230921181236.509072-3-Liam.Howlett@oracle.com
Link: https://gist.github.com/heatd/85d2971fae1501b55b6ea401fbbe485b
Link: https://lore.kernel.org/linux-mm/20230921181236.509072-1-Liam.Howlett@oracle.com/
Fixes: 39193685d585 ("maple_tree: try harder to keep active node with mas_prev()")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Pedro Falcato <pedro.falcato@gmail.com>
Closes: https://gist.github.com/heatd/85d2971fae1501b55b6ea401fbbe485b
Closes: https://bugs.archlinux.org/task/79656
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use proper kernel-doc notation to prevent build warnings:
lib/argv_split.c:36: warning: Function parameter or member 'argv' not described in 'argv_free'
lib/argv_split.c:61: warning: No description found for return value of 'argv_split'
Link: https://lkml.kernel.org/r/20230912060838.3794-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Describe missing function parameters to prevent kernel-doc warnings:
lib/scatterlist.c:288: warning: Function parameter or member 'first_chunk' not described in '__sg_alloc_table'
lib/scatterlist.c:800: warning: Function parameter or member 'flags' not described in 'sg_miter_start'
Link: https://lkml.kernel.org/r/20230912060848.4673-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
"Fixes to possible memory leak, null-ptr-deref, wild-memory-access, and
error path bugs"
* tag 'linux-kselftest-kunit-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Fix possible memory leak in kunit_filter_suites()
kunit: Fix possible null-ptr-deref in kunit_parse_glob_filter()
kunit: Fix the wrong err path and add goto labels in kunit_filter_suites()
kunit: Fix wild-memory-access bug in kunit_free_suite_set()
kunit: test: Make filter strings in executor_test writable
|
|
Add some kunit tests for page extraction for ITER_BVEC, ITER_KVEC and
ITER_XARRAY type iterators. ITER_UBUF and ITER_IOVEC aren't dealt with
as they require userspace VM interaction. ITER_DISCARD isn't dealt with
either as that can't be extracted.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add some kunit tests for page extraction for ITER_BVEC, ITER_KVEC and
ITER_XARRAY type iterators. ITER_UBUF and ITER_IOVEC aren't dealt with
as they require userspace VM interaction. ITER_DISCARD isn't dealt with
either as that does nothing.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
iov_iter_extract_pages() doesn't correctly handle skipping over initial
zero-length entries in ITER_KVEC and ITER_BVEC-type iterators.
The problem is that it accidentally reduces maxsize to 0 when it
skipping and thus runs to the end of the array and returns 0.
Fix this by sticking the calculated size-to-copy in a new variable
rather than back in maxsize.
Fixes: 7d58fe731028 ("iov_iter: Add a function to extract a page list from an iterator")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull xarray fixes from Matthew Wilcox:
- Fix a bug encountered by people using bittorrent where they'd get
NULL pointer dereferences on page cache lookups when using XFS
- Two documentation fixes
* tag 'xarray-6.6' of git://git.infradead.org/users/willy/xarray:
idr: fix param name in idr_alloc_cyclic() doc
xarray: Document necessary flag in alloc functions
XArray: Do not return sibling entries from xa_load()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Allow usage of LSX/LASX in the kernel, and use them for
SIMD-optimized RAID5/RAID6 routines
- Add Loongson Binary Translation (LBT) extension support
- Add basic KGDB & KDB support
- Add building with kcov coverage
- Add KFENCE (Kernel Electric-Fence) support
- Add KASAN (Kernel Address Sanitizer) support
- Some bug fixes and other small changes
- Update the default config file
* tag 'loongarch-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (25 commits)
LoongArch: Update Loongson-3 default config file
LoongArch: Add KASAN (Kernel Address Sanitizer) support
LoongArch: Simplify the processing of jumping new kernel for KASLR
kasan: Add (pmd|pud)_init for LoongArch zero_(pud|p4d)_populate process
kasan: Add __HAVE_ARCH_SHADOW_MAP to support arch specific mapping
LoongArch: Add KFENCE (Kernel Electric-Fence) support
LoongArch: Get partial stack information when providing regs parameter
LoongArch: mm: Add page table mapped mode support for virt_to_page()
kfence: Defer the assignment of the local variable addr
LoongArch: Allow building with kcov coverage
LoongArch: Provide kaslr_offset() to get kernel offset
LoongArch: Add basic KGDB & KDB support
LoongArch: Add Loongson Binary Translation (LBT) extension support
raid6: Add LoongArch SIMD recovery implementation
raid6: Add LoongArch SIMD syndrome calculation
LoongArch: Add SIMD-optimized XOR routines
LoongArch: Allow usage of LSX/LASX in the kernel
LoongArch: Define symbol 'fault' as a local label in fpu.S
LoongArch: Adjust {copy, clear}_user exception handler behavior
LoongArch: Use static defined zero page rather than allocated
...
|
|
Similar to the syndrome calculation, the recovery algorithms also work
on 64 bytes at a time to align with the L1 cache line size of current
and future LoongArch cores (that we care about). Which means
unrolled-by-4 LSX and unrolled-by-2 LASX code.
The assembly is originally based on the x86 SSSE3/AVX2 ports, but
register allocation has been redone to take advantage of LSX/LASX's 32
vector registers, and instruction sequence has been optimized to suit
(e.g. LoongArch can perform per-byte srl and andi on vectors, but x86
cannot).
Performance numbers measured by instrumenting the raid6test code, on a
3A5000 system clocked at 2.5GHz:
> lasx 2data: 354.987 MiB/s
> lasx datap: 350.430 MiB/s
> lsx 2data: 340.026 MiB/s
> lsx datap: 337.318 MiB/s
> intx1 2data: 164.280 MiB/s
> intx1 datap: 187.966 MiB/s
Because recovery algorithms are chosen solely based on priority and
availability, lasx is marked as priority 2 and lsx priority 1. At least
for the current generation of LoongArch micro-architectures, LASX should
always be faster than LSX whenever supported, and have similar power
consumption characteristics (because the only known LASX-capable uarch,
the LA464, always compute the full 256-bit result for vector ops).
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The algorithms work on 64 bytes at a time, which is the L1 cache line
size of all current and future LoongArch cores (that we care about), as
confirmed by Huacai. The code is based on the generic int.uc algorithm,
unrolled 4 times for LSX and 2 times for LASX. Further unrolling does
not meaningfully improve the performance according to experiments.
Performance numbers measured during system boot on a 3A5000 @ 2.5GHz:
> raid6: lasx gen() 12726 MB/s
> raid6: lsx gen() 10001 MB/s
> raid6: int64x8 gen() 2876 MB/s
> raid6: int64x4 gen() 3867 MB/s
> raid6: int64x2 gen() 2531 MB/s
> raid6: int64x1 gen() 1945 MB/s
Comparison of xor() speeds (from different boots but meaningful anyway):
> lasx: 11226 MB/s
> lsx: 6395 MB/s
> int64x4: 2147 MB/s
Performance as measured by raid6test:
> raid6: lasx gen() 25109 MB/s
> raid6: lsx gen() 13233 MB/s
> raid6: int64x8 gen() 4164 MB/s
> raid6: int64x4 gen() 6005 MB/s
> raid6: int64x2 gen() 5781 MB/s
> raid6: int64x1 gen() 4119 MB/s
> raid6: using algorithm lasx gen() 25109 MB/s
> raid6: .... xor() 14439 MB/s, rmw enabled
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The relevant parameter is 'start' and not 'nextid'
Fixes: 460488c58ca8 ("idr: Remove idr_alloc_ext")
Signed-off-by: Ariel Marcovitch <arielmarcovitch@gmail.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Adds a new line to the docstrings of functions wrapping __xa_alloc() and
__xa_alloc_cyclic(), informing about the necessity of flag XA_FLAGS_ALLOC
being set previously.
The documentation so far says that functions wrapping __xa_alloc() and
__xa_alloc_cyclic() are supposed to return either -ENOMEM or -EBUSY in
case of an error. If the xarray has been initialized without the flag
XA_FLAGS_ALLOC, however, they fail with a different, undocumented error
code.
As hinted at in Documentation/core-api/xarray.rst, wrappers around these
functions should only be invoked when the flag has been set. The
functions' documentation should reflect that as well.
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
If both filter_glob and filters are not NULL, and kunit_parse_glob_filter()
succeed, but kcalloc parsed_filters fails, the suite_glob and test_glob of
parsed kzalloc in kunit_parse_glob_filter() will be leaked.
As Rae suggested, assign -ENOMEM to *err to correctly free copy and goto
free_parsed_glob to free the suite/test_glob of parsed.
Fixes: 1c9fd080dffe ("kunit: fix uninitialized variables bug in attributes filtering")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Inject fault while probing kunit-example-test.ko, if kzalloc fails
in kunit_parse_glob_filter(), strcpy() or strncpy() to NULL will
cause below null-ptr-deref bug. So check NULL for kzalloc() and
return int instead of void for kunit_parse_glob_filter().
Unable to handle kernel paging request at virtual address dfff800000000000
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[dfff800000000000] address between user and kernel address ranges
Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
Modules linked in: kunit_example_test cfg80211 rfkill 8021q garp mrp stp llc ipv6 [last unloaded: kunit_example_test]
CPU: 4 PID: 6047 Comm: modprobe Tainted: G W N 6.5.0-next-20230829+ #141
Hardware name: linux,dummy-virt (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : strncpy+0x58/0xc0
lr : kunit_filter_suites+0x15c/0xa84
sp : ffff800082a17420
x29: ffff800082a17420 x28: 0000000000000000 x27: 0000000000000004
x26: 0000000000000000 x25: ffffa847e40a5320 x24: 0000000000000001
x23: 0000000000000000 x22: 0000000000000001 x21: dfff800000000000
x20: 000000000000002a x19: 0000000000000000 x18: 00000000750b3b54
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000000 x13: 34393178302f3039 x12: ffff7508fcea4ec1
x11: 1ffff508fcea4ec0 x10: ffff7508fcea4ec0 x9 : dfff800000000000
x8 : ffff6051b1a7f86a x7 : ffff800082a17270 x6 : 0000000000000002
x5 : 0000000000000098 x4 : ffff028d9817b250 x3 : 0000000000000000
x2 : 0000000000000000 x1 : ffffa847e40a5320 x0 : 0000000000000000
Call trace:
strncpy+0x58/0xc0
kunit_filter_suites+0x15c/0xa84
kunit_module_notify+0x1b0/0x3ac
blocking_notifier_call_chain+0xc4/0x128
do_init_module+0x250/0x594
load_module+0x37b0/0x44b4
init_module_from_file+0xd4/0x128
idempotent_init_module+0x2c8/0x524
__arm64_sys_finit_module+0xac/0x100
invoke_syscall+0x6c/0x258
el0_svc_common.constprop.0+0x160/0x22c
do_el0_svc+0x44/0x5c
el0_svc+0x38/0x78
el0t_64_sync_handler+0x13c/0x158
el0t_64_sync+0x190/0x194
Code: 5400028a d343fe63 12000a62 39400034 (38f56863)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: 0x284761400000 from 0xffff800080000000
PHYS_OFFSET: 0xfffffd7380000000
CPU features: 0x88000203,3c020000,1000421b
Memory Limit: none
Rebooting in 1 seconds..
Fixes: a127b154a8f2 ("kunit: tool: allow filtering test cases via glob")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Take the last kfree(parsed_filters) and add it to be the first. Take
the first kfree(copy) and add it to be the last. The Best practice is to
return these errors reversely.
And as David suggested, add several labels which target only the things
which actually have been allocated so far.
Fixes: 529534e8cba3 ("kunit: Add ability to filter attributes")
Fixes: abbf73816b6f ("kunit: fix possible memory leak in kunit_filter_suites()")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Suggested-by: David Gow <davidgow@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Inject fault while probing kunit-example-test.ko, if kstrdup()
fails in mod_sysfs_setup() in load_module(), the mod->state will
switch from MODULE_STATE_COMING to MODULE_STATE_GOING instead of
from MODULE_STATE_LIVE to MODULE_STATE_GOING, so only
kunit_module_exit() will be called without kunit_module_init(), and
the mod->kunit_suites is no set correctly and the free in
kunit_free_suite_set() will cause below wild-memory-access bug.
The mod->state state machine when load_module() succeeds:
MODULE_STATE_UNFORMED ---> MODULE_STATE_COMING ---> MODULE_STATE_LIVE
^ |
| | delete_module
+---------------- MODULE_STATE_GOING <---------+
The mod->state state machine when load_module() fails at
mod_sysfs_setup():
MODULE_STATE_UNFORMED ---> MODULE_STATE_COMING ---> MODULE_STATE_GOING
^ |
| |
+-----------------------------------------------+
Call kunit_module_init() at MODULE_STATE_COMING state to fix the issue
because MODULE_STATE_LIVE is transformed from it.
Unable to handle kernel paging request at virtual address ffffff341e942a88
KASAN: maybe wild-memory-access in range [0x0003f9a0f4a15440-0x0003f9a0f4a15447]
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000441ea000
[ffffff341e942a88] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Modules linked in: kunit_example_test(-) cfg80211 rfkill 8021q garp mrp stp llc ipv6 [last unloaded: kunit_example_test]
CPU: 3 PID: 2035 Comm: modprobe Tainted: G W N 6.5.0-next-20230828+ #136
Hardware name: linux,dummy-virt (DT)
pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : kfree+0x2c/0x70
lr : kunit_free_suite_set+0xcc/0x13c
sp : ffff8000829b75b0
x29: ffff8000829b75b0 x28: ffff8000829b7b90 x27: 0000000000000000
x26: dfff800000000000 x25: ffffcd07c82a7280 x24: ffffcd07a50ab300
x23: ffffcd07a50ab2e8 x22: 1ffff00010536ec0 x21: dfff800000000000
x20: ffffcd07a50ab2f0 x19: ffffcd07a50ab2f0 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: ffffcd07c24b6764
x14: ffffcd07c24b63c0 x13: ffffcd07c4cebb94 x12: ffff700010536ec7
x11: 1ffff00010536ec6 x10: ffff700010536ec6 x9 : dfff800000000000
x8 : 00008fffefac913a x7 : 0000000041b58ab3 x6 : 0000000000000000
x5 : 1ffff00010536ec5 x4 : ffff8000829b7628 x3 : dfff800000000000
x2 : ffffff341e942a80 x1 : ffffcd07a50aa000 x0 : fffffc0000000000
Call trace:
kfree+0x2c/0x70
kunit_free_suite_set+0xcc/0x13c
kunit_module_notify+0xd8/0x360
blocking_notifier_call_chain+0xc4/0x128
load_module+0x382c/0x44a4
init_module_from_file+0xd4/0x128
idempotent_init_module+0x2c8/0x524
__arm64_sys_finit_module+0xac/0x100
invoke_syscall+0x6c/0x258
el0_svc_common.constprop.0+0x160/0x22c
do_el0_svc+0x44/0x5c
el0_svc+0x38/0x78
el0t_64_sync_handler+0x13c/0x158
el0t_64_sync+0x190/0x194
Code: aa0003e1 b25657e0 d34cfc42 8b021802 (f9400440)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: 0x4d0742200000 from 0xffff800080000000
PHYS_OFFSET: 0xffffee43c0000000
CPU features: 0x88000203,3c020000,1000421b
Memory Limit: none
Rebooting in 1 seconds..
Fixes: 3d6e44623841 ("kunit: unify module and builtin suite definitions")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Do not try to get the console lock when it is not need or useful in
panic()
- Replace the global console_suspended state by a per-console flag
- Export symbols needed for dumping the raw printk buffer in panic()
- Fix documentation of printf formats for integer types
- Moved Sergey Senozhatsky to the reviewer role
- Misc cleanups
* tag 'printk-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: export symbols for debug modules
lib: test_scanf: Add explicit type cast to result initialization in test_number_prefix()
printk: ringbuffer: Fix truncating buffer size min_t cast
printk: Rename abandon_console_lock_in_panic() to other_cpu_in_panic()
printk: Add per-console suspended state
printk: Consolidate console deferred printing
printk: Do not take console lock for console_flush_on_panic()
printk: Keep non-panic-CPUs out of console lock
printk: Reduce console_unblank() usage in unsafe scenarios
kdb: Do not assume write() callback available
docs: printk-formats: Treat char as always unsigned
docs: printk-formats: Fix hex printing of signed values
MAINTAINERS: adjust printk/vsprintf entries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu updates from Dennis Zhou:
"One bigger change to percpu_counter's api allowing for init and
destroy of multiple counters via percpu_counter_init_many() and
percpu_counter_destroy_many(). This is used to help begin remediating
a performance regression with percpu rss stats.
Additionally, it seems larger core count machines are feeling the
burden of the single threaded allocation of percpu. Mateusz is
thinking about it and I will spend some time on it too.
percpu:
- A couple cleanups by Baoquan He and Bibo Mao. The only behavior
change is to start printing messages if we're under the warn limit
for failed atomic allocations.
percpu_counter:
- Shakeel introduced percpu counters into mm_struct which caused
percpu allocations be on the hot path [1]. Originally I spent some
time trying to improve the percpu allocator, but instead preferred
what Mateusz Guzik proposed grouping at the allocation site,
percpu_counter_init_many(). This allows a single percpu allocation
to be shared by the counters. I like this approach because it
creates a shared lifetime by the allocations. Additionally, I
believe many inits have higher level synchronization requirements,
like percpu_counter does against HOTPLUG_CPU. Therefore we can
group these optimizations together"
Link: https://lore.kernel.org/linux-mm/20221024052841.3291983-1-shakeelb@google.com/ [1]
* tag 'percpu-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
kernel/fork: group allocation/free of per-cpu counters for mm struct
pcpcntr: add group allocation/free
mm/percpu.c: print error message too if atomic alloc failed
mm/percpu.c: optimize the code in pcpu_setup_first_chunk() a little bit
mm/percpu.c: remove redundant check
mm/percpu: Remove some local variables in pcpu_populate_pte
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
nvmem: core: Notify when a new layout is registered
nvmem: core: Do not open-code existing functions
nvmem: core: Return NULL when no nvmem layout is found
nvmem: core: Create all cells before adding the nvmem device
nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
dt-bindings: nvmem: Add compatible for QCM2290
nvmem: Kconfig: Fix typo "drive" -> "driver"
nvmem: Explicitly include correct DT includes
nvmem: add new NXP QorIQ eFuse driver
dt-bindings: nvmem: Add t1023-sfp efuse support
dt-bindings: nvmem: qfprom: Add compatible for MSM8226
nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
nvmem: qfprom: do some cleanup
nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is a small set of driver core updates and additions for 6.6-rc1.
Included in here are:
- stable kernel documentation updates
- class structure const work from Ivan on various subsystems
- kernfs tweaks
- driver core tests!
- kobject sanity cleanups
- kobject structure reordering to save space
- driver core error code handling fixups
- other minor driver core cleanups
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
driver core: Call in reversed order in device_platform_notify_remove()
driver core: Return proper error code when dev_set_name() fails
kobject: Remove redundant checks for whether ktype is NULL
kobject: Add sanity check for kset->kobj.ktype in kset_register()
drivers: base: test: Add missing MODULE_* macros to root device tests
drivers: base: test: Add missing MODULE_* macros for platform devices tests
drivers: base: Free devm resources when unregistering a device
drivers: base: Add basic devm tests for platform devices
drivers: base: Add basic devm tests for root devices
kernfs: fix missing kernfs_iattr_rwsem locking
docs: stable-kernel-rules: mention that regressions must be prevented
docs: stable-kernel-rules: fine-tune various details
docs: stable-kernel-rules: make the examples for option 1 a proper list
docs: stable-kernel-rules: move text around to improve flow
docs: stable-kernel-rules: improve structure by changing headlines
base/node: Remove duplicated include
kernfs: attach uuid for every kernfs and report it in fsid
kernfs: add stub helper for kernfs_generic_poll()
x86/resctrl: make pseudo_lock_class a static const structure
x86/MSR: make msr_class a static const structure
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the new "riscv,isa-extensions" and "riscv,isa-base"
device tree interfaces for probing extensions
- Support for userspace access to the performance counters
- Support for more instructions in kprobes
- Crash kernels can be allocated above 4GiB
- Support for KCFI
- Support for ELFs in !MMU configurations
- ARCH_KMALLOC_MINALIGN has been reduced to 8
- mmap() defaults to sv48-sized addresses, with longer addresses hidden
behind a hint (similar to Arm and Intel)
- Also various fixes and cleanups
* tag 'riscv-for-linus-6.6-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
lib/Kconfig.debug: Restrict DEBUG_INFO_SPLIT for RISC-V
riscv: support PREEMPT_DYNAMIC with static keys
riscv: Move create_tmp_mapping() to init sections
riscv: Mark KASAN tmp* page tables variables as static
riscv: mm: use bitmap_zero() API
riscv: enable DEBUG_FORCE_FUNCTION_ALIGN_64B
riscv: remove redundant mv instructions
RISC-V: mm: Document mmap changes
RISC-V: mm: Update pgtable comment documentation
RISC-V: mm: Add tests for RISC-V mm
RISC-V: mm: Restrict address space for sv39,sv48,sv57
riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent
riscv: allow kmalloc() caches aligned to the smallest value
riscv: support the elf-fdpic binfmt loader
binfmt_elf_fdpic: support 64-bit systems
riscv: Allow CONFIG_CFI_CLANG to be selected
riscv/purgatory: Disable CFI
riscv: Add CFI error handling
riscv: Add ftrace_stub_graph
riscv: Add types to indirectly called assembly functions
...
|
|
KUnit's attribute filtering feature needs the filter strings passed in
to be writable, as it modifies them in-place during parsing. This works
for the filters passed on the kernel command line, but the string
literals used in the executor tests are at least theoretically read-only
(though they work on x86_64 for some reason). s390 wasn't fooled, and
crashed when these tests were run.
Use a 'char[]' instead, (and make an explicit variable for the current
filter in parse_filter_attr_test), which will store the string in a
writable segment.
Fixes: 76066f93f1df ("kunit: add tests for filtering attributes")
Closes: https://lore.kernel.org/linux-kselftest/55950256-c00a-4d21-a2c0-cf9f0e5b8a9a@roeck-us.net/
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When building for ARCH=riscv using LLVM < 14, there is an error with
CONFIG_DEBUG_INFO_SPLIT=y:
error: A dwo section may not contain relocations
This was worked around in LLVM 15 by disallowing '-gsplit-dwarf' with
'-mrelax' (the default), so CONFIG_DEBUG_INFO_SPLIT is not selectable
with newer versions of LLVM:
$ clang --target=riscv64-linux-gnu -gsplit-dwarf -c -o /dev/null -x c /dev/null
clang: error: -gsplit-dwarf is unsupported with RISC-V linker relaxation (-mrelax)
GCC silently had a similar issue that was resolved with GCC 12.x.
Restrict CONFIG_DEBUG_INFO_SPLIT for RISC-V when using LLVM or GCC <
12.x to avoid these known issues.
Link: https://github.com/ClangBuiltLinux/linux/issues/1914
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99090
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202308090204.9yZffBWo-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230816-riscv-debug_info_split-v1-1-d1019d6ccc11@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Allow to force all function address 64B aligned as it is possible for
other architectures. This may be useful when verify if performance
bump is caused by function alignment changes.
Before commit 1bf18da62106 ("lib/Kconfig.debug: add ARCH dependency
for FUNCTION_ALIGN option"), riscv supports enabling the
DEBUG_FORCE_FUNCTION_ALIGN_64B option, but after that commit, each
arch needs to claim the support explicitly.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230727160356.3874-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there aren't
any changes to the clk framework this time around. That's probably
because everyone was on vacation (yours truly included). We did lose a
couple clk drivers this time around because nobody was using those
devices. That skews the diffstat a bit, but either way, nothing looks
out of the ordinary here. The usual suspects are chugging along adding
support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a
handful of patches that move the NR_CLKS define from the DT binding
header to the driver. There's even patches that migrate drivers to use
clk_parent_data and clk_hw to describe clk tree topology. It seems
that the spring (summer?) cleaning bug got some folks, or the
semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct
spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to
drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
RZ/G2 SoCs
- Convert sun9i-mmc clock to use
devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
consider alternative parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher)
clock rate for NM, NKM, mux and div type clocks, as use it for
Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for
Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
moved out to the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global
clock controller driver
- Support retention for the Qualcomm SC8280XP display clock
controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
to fix issues with missing parent clocks across sc7180, sm7150,
sm6350 and sm8250, while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for
correctness
- Extend the Qualcomm SM83550 Video clock controller to support
SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
R-Car H3, M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
allow glitch free switching"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree include cleanups from Rob Herring:
"These are the remaining few clean-ups of DT related includes which
didn't get applied to subsystem trees"
* tag 'devicetree-header-cleanups-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
ipmi: Explicitly include correct DT includes
tpm: Explicitly include correct DT includes
lib/genalloc: Explicitly include correct DT includes
parport: Explicitly include correct DT includes
sbus: Explicitly include correct DT includes
mux: Explicitly include correct DT includes
macintosh: Explicitly include correct DT includes
hte: Explicitly include correct DT includes
EDAC: Explicitly include correct DT includes
clocksource: Explicitly include correct DT includes
sparc: Explicitly include correct DT includes
riscv: Explicitly include correct DT includes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've received a fairly wide range of changes at this time, including
for ALSA and ASoC core, but all of them are rather small changes.
Here are some highlights:
ALSA / ASoC Core:
- Fixes of inconsistent locking around control API helpers
- A few new control API functions and cleanups
- Workarounds for potential UAFs by delayed kobj releases
- Unified PCM copy ops with iov_iter
- Continued efforts for ASoC API cleanups
ASoC:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes
- Create a library function for intlog10() and use it in the NAU8825
driver
- Convert drivers to use the more modern maple tree register cache
- Lots of work on the SOF framework, AMD and Intel drivers, including
a lot of cleanup and new device support
- Standardization of the presentation of jacks from drivers
- Provision of some generic sound card DT properties
- Support for AMD Van Gogh, AMD machines with MAX98388 and NAU8821,
AWInic AW88261, Cirrus Logic CS35L36 and CS42L43, various Intel
platforms including AVS machines with ES8336 and RT5663, Mediatek
MT7986, NXP i.MX93, RealTek RT1017 and StarFive JH7110
Others:
- New test coverage including ASoC and topology tests in KUnit; this
also involves enabling UML builds of ALSA since that's the default
KUnit test environment which pulls in the addition of some stubs to
the driver
- More enhancement of pcmtest driver
- A few fixes / enhancements of MIDI 2.0 UMP core
- Using PCI definitions in allover HD-audio code
- Support for Cirrus CS35L56 and TI TAS2781 HD-audio sub-codecs
- CS35L41 HD-audio sub-codec improvements
- Continued emu10k1 improvements"
* tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (693 commits)
ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl
ASoC: dwc: i2s: Fix unused functions
ALSA: usb-audio: Don't try to submit URBs after disconnection
ALSA: emu10k1: add separate documentation for E-MU cards
ALSA: emu10k1: more documentation updates
ALSA: emu10k1: de-duplicate audigy-mixer.rst vs. sb-live-mixer.rst
ALSA: ump: Fix -Wformat-truncation warnings
ALSA: hda: Add missing dependency on CONFIG_EFI for Cirrus/TI sub-codecs
ALSA: doc: Fix missing backquote in midi-2.0.rst
ALSA: hda/realtek: Add quirk for mute LEDs on HP ENVY x360 15-eu0xxx
ALSA: hda/tas2781: Switch back to use struct i2c_driver's .probe()
ASoC: soc-core.c: Do not error if a DAI link component is not found
ASoC: codecs: Fix error code in aw88261_i2c_probe()
ASoC: audio-graph-card.c: move audio_graph_parse_of()
ASoC: cs42l43: Use new-style PM runtime macros
ALSA: documentation: Add description for USB MIDI 2.0 gadget driver
ALSA: ump: Don't create unused substreams for static blocks
ALSA: ump: Fill group names for legacy rawmidi substreams
ALSA: usb-audio: Attach legacy rawmidi after probing all UMP EPs
ALSA: ac97: Fix possible error value of *rac97
...
|
|
LoongArch architecture changes for 6.5 (raid5/6 optimization) depend on
the md changes to fix build and work, so merge them to create a base.
|
|
Pull block updates from Jens Axboe:
"Pretty quiet round for this release. This contains:
- Add support for zoned storage to ublk (Andreas, Ming)
- Series improving performance for drivers that mark themselves as
needing a blocking context for issue (Bart)
- Cleanup the flush logic (Chengming)
- sed opal keyring support (Greg)
- Fixes and improvements to the integrity support (Jinyoung)
- Add some exports for bcachefs that we can hopefully delete again in
the future (Kent)
- deadline throttling fix (Zhiguo)
- Series allowing building the kernel without buffer_head support
(Christoph)
- Sanitize the bio page adding flow (Christoph)
- Write back cache fixes (Christoph)
- MD updates via Song:
- Fix perf regression for raid0 large sequential writes (Jan)
- Fix split bio iostat for raid0 (David)
- Various raid1 fixes (Heinz, Xueshi)
- raid6test build fixes (WANG)
- Deprecate bitmap file support (Christoph)
- Fix deadlock with md sync thread (Yu)
- Refactor md io accounting (Yu)
- Various non-urgent fixes (Li, Yu, Jack)
- Various fixes and cleanups (Arnd, Azeem, Chengming, Damien, Li,
Ming, Nitesh, Ruan, Tejun, Thomas, Xu)"
* tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux: (113 commits)
block: use strscpy() to instead of strncpy()
block: sed-opal: keyring support for SED keys
block: sed-opal: Implement IOC_OPAL_REVERT_LSP
block: sed-opal: Implement IOC_OPAL_DISCOVERY
blk-mq: prealloc tags when increase tagset nr_hw_queues
blk-mq: delete redundant tagset map update when fallback
blk-mq: fix tags leak when shrink nr_hw_queues
ublk: zoned: support REQ_OP_ZONE_RESET_ALL
md: raid0: account for split bio in iostat accounting
md/raid0: Fix performance regression for large sequential writes
md/raid0: Factor out helper for mapping and submitting a bio
md raid1: allow writebehind to work on any leg device set WriteMostly
md/raid1: hold the barrier until handle_read_error() finishes
md/raid1: free the r1bio before waiting for blocked rdev
md/raid1: call free_r1bio() before allow_barrier() in raid_end_bio_io()
blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init
drivers/rnbd: restore sysfs interface to rnbd-client
md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid()
raid6: test: only check for Altivec if building on powerpc hosts
raid6: test: make sure all intermediate and artifact files are .gitignored
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options")
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h")
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands")
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions")
- Switch the handling of kdump from a udev scheme to in-kernel
handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
hot un/plug")
- Many singleton patches to various parts of the tree
* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
document while_each_thread(), change first_tid() to use for_each_thread()
drivers/char/mem.c: shrink character device's devlist[] array
x86/crash: optimize CPU changes
crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
crash: hotplug support for kexec_load()
x86/crash: add x86 crash hotplug support
crash: memory and CPU hotplug sysfs attributes
kexec: exclude elfcorehdr from the segment digest
crash: add generic infrastructure for crash hotplug support
crash: move a few code bits to setup support of crash hotplug
kstrtox: consistently use _tolower()
kill do_each_thread()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
scripts/bloat-o-meter: count weak symbol sizes
treewide: drop CONFIG_EMBEDDED
lockdep: fix static memory detection even more
lib/vsprintf: declare no_hash_pointers in sprintf.h
lib/vsprintf: split out sprintf() and friends
kernel/fork: stop playing lockless games for exe_file replacement
adfs: delete unused "union adfs_dirtail" definition
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations
- Store netdevs in an xarray, to simplify iterating over netdevs
- Refactor nexthop selection for multipath routes
- Improve sched class lifetime handling
- Add backup nexthop ID support for bridge
- Implement drop reasons support in openvswitch
- Several data races annotations and fixes
- Constify the sk parameter of routing functions
- Prepend kernel version to netconsole message
Protocols:
- Implement support for TCP probing the peer being under memory
pressure
- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes
- In-kernel support for the TLS alert protocol
- Better support for UDP reuseport with connected sockets
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size
- Get rid of additional ancillary per MPTCP connection struct socket
- Implement support for BPF-based MPTCP packet schedulers
- Format MPTCP subtests selftests results in TAP
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation
BPF:
- Multi-buffer support in AF_XDP
- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds
- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it
- Add SO_REUSEPORT support for TC bpf_sk_assign
- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64
- Support defragmenting IPv(4|6) packets in BPF
- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling
- Introduce bpf map element count and enable it for all program types
- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress
- Add uprobe support for the bpf_get_func_ip helper
- Check skb ownership against full socket
- Support for up to 12 arguments in BPF trampoline
- Extend link_info for kprobe_multi and perf_event links
Netfilter:
- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types
Driver API:
- Page pool optimizations, to improve data locality and cache usage
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers
- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info
- Extend and use the yaml devlink specs to [re]generate the split ops
- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes
- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool
- Remove phylink legacy mode support
- Support offload LED blinking to phy
- Add devlink port function attributes for IPsec
New hardware / drivers:
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers:
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering"
* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Move crypto engine callback from tfm ctx into algorithm object
- Fix atomic sleep bug in crypto_destroy_instance
- Move lib/mpi into lib/crypto
Algorithms:
- Add chacha20 and poly1305 implementation for powerpc p10
Drivers:
- Add AES skcipher and aead support to starfive
- Add Dynamic Boost Control support to ccp
- Add support for STM32P13 platform to stm32"
* tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (149 commits)
Revert "dt-bindings: crypto: qcom,prng: Add SM8450"
crypto: chelsio - Remove unused declarations
X.509: if signature is unsupported skip validation
crypto: qat - fix crypto capability detection for 4xxx
crypto: drivers - Explicitly include correct DT includes
crypto: engine - Remove crypto_engine_ctx
crypto: zynqmp - Use new crypto_engine_op interface
crypto: virtio - Use new crypto_engine_op interface
crypto: stm32 - Use new crypto_engine_op interface
crypto: jh7110 - Use new crypto_engine_op interface
crypto: rk3288 - Use new crypto_engine_op interface
crypto: omap - Use new crypto_engine_op interface
crypto: keembay - Use new crypto_engine_op interface
crypto: sl3516 - Use new crypto_engine_op interface
crypto: caam - Use new crypto_engine_op interface
crypto: aspeed - Remove non-standard sha512 algorithms
crypto: aspeed - Use new crypto_engine_op interface
crypto: amlogic - Use new crypto_engine_op interface
crypto: sun8i-ss - Use new crypto_engine_op interface
crypto: sun8i-ce - Use new crypto_engine_op interface
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- add support for running Rust documentation tests as KUnit tests
- make init, str, sync, types doctests compilable/testable
- add support for attributes API which include speed, modules
attributes, ability to filter and report attributes
- add support for marking tests slow using attributes API
- add attributes API documentation
- fix a wild-memory-access bug in kunit_filter_suites() and a possible
memory leak in kunit_filter_suites()
- add support for counting number of test suites in a module, list
action to kunit test modules, and test filtering on module tests
* tag 'linux-kselftest-kunit-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
kunit: fix struct kunit_attr header
kunit: replace KUNIT_TRIGGER_STATIC_STUB maro with KUNIT_STATIC_STUB_REDIRECT
kunit: Allow kunit test modules to use test filtering
kunit: Make 'list' action available to kunit test modules
kunit: Report the count of test suites in a module
kunit: fix uninitialized variables bug in attributes filtering
kunit: fix possible memory leak in kunit_filter_suites()
kunit: fix wild-memory-access bug in kunit_filter_suites()
kunit: Add documentation of KUnit test attributes
kunit: add tests for filtering attributes
kunit: time: Mark test as slow using test attributes
kunit: memcpy: Mark tests as slow using test attributes
kunit: tool: Add command line interface to filter and report attributes
kunit: Add ability to filter attributes
kunit: Add module attribute
kunit: Add speed attribute
kunit: Add test attributes API structure
MAINTAINERS: add Rust KUnit files to the KUnit entry
rust: support running Rust documentation tests as KUnit ones
rust: types: make doctests compilable/testable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking update from Ingo Molnar:
"Simplify the locking self-tests via using the new <linux/cleanup.h>
facilities for lock guards"
* tag 'locking-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep/selftests: Use SBRM APIs for wait context tests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As has become normal, changes are scattered around the tree (either
explicitly maintainer Acked or for trivial stuff that went ignored):
- Carve out the new CONFIG_LIST_HARDENED as a more focused subset of
CONFIG_DEBUG_LIST (Marco Elver)
- Fix kallsyms lookup failure under Clang LTO (Yonghong Song)
- Clarify documentation for CONFIG_UBSAN_TRAP (Jann Horn)
- Flexible array member conversion not carried in other tree (Gustavo
A. R. Silva)
- Various strlcpy() and strncpy() removals not carried in other trees
(Azeem Shaikh, Justin Stitt)
- Convert nsproxy.count to refcount_t (Elena Reshetova)
- Add handful of __counted_by annotations not carried in other trees,
as well as an LKDTM test
- Fix build failure with gcc-plugins on GCC 14+
- Fix selftests to respect SKIP for signal-delivery tests
- Fix CFI warning for paravirt callback prototype
- Clarify documentation for seq_show_option_n() usage"
* tag 'hardening-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
LoadPin: Annotate struct dm_verity_loadpin_trusted_root_digest with __counted_by
kallsyms: Change func signature for cleanup_symbol_name()
kallsyms: Fix kallsyms_selftest failure
nsproxy: Convert nsproxy.count to refcount_t
integrity: Annotate struct ima_rule_opt_list with __counted_by
lkdtm: Add FAM_BOUNDS test for __counted_by
Compiler Attributes: counted_by: Adjust name and identifier expansion
um: refactor deprecated strncpy to memcpy
um: vector: refactor deprecated strncpy
alpha: Replace one-element array with flexible-array member
hardening: Move BUG_ON_DATA_CORRUPTION to hardening options
list: Introduce CONFIG_LIST_HARDENED
list_debug: Introduce inline wrappers for debug checks
compiler_types: Introduce the Clang __preserve_most function attribute
gcc-plugins: Rename last_stmt() for GCC 14+
selftests/harness: Actually report SKIP for signal tests
x86/paravirt: Fix tlb_remove_table function callback prototype warning
EISA: Replace all non-returning strlcpy with strscpy
perf: Replace strlcpy with strscpy
um: Remove strlcpy declaration
...
|
|
Pull iomap updates from Darrick Wong:
"We've got some big changes for this release -- I'm very happy to be
landing willy's work to enable large folios for the page cache for
general read and write IOs when the fs can make contiguous space
allocations, and Ritesh's work to track sub-folio dirty state to
eliminate the write amplification problems inherent in using large
folios.
As a bonus, io_uring can now process write completions in the caller's
context instead of bouncing through a workqueue, which should reduce
io latency dramatically. IOWs, XFS should see a nice performance bump
for both IO paths.
Summary:
- Make large writes to the page cache fill sparse parts of the cache
with large folios, then use large memcpy calls for the large folio.
- Track the per-block dirty state of each large folio so that a
buffered write to a single byte on a large folio does not result in
a (potentially) multi-megabyte writeback IO.
- Allow some directio completions to be performed in the initiating
task's context instead of punting through a workqueue. This will
reduce latency for some io_uring requests"
* tag 'iomap-6.6-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (26 commits)
iomap: support IOCB_DIO_CALLER_COMP
io_uring/rw: add write support for IOCB_DIO_CALLER_COMP
fs: add IOCB flags related to passing back dio completions
iomap: add IOMAP_DIO_INLINE_COMP
iomap: only set iocb->private for polled bio
iomap: treat a write through cache the same as FUA
iomap: use an unsigned type for IOMAP_DIO_* defines
iomap: cleanup up iomap_dio_bio_end_io()
iomap: Add per-block dirty state tracking to improve performance
iomap: Allocate ifs in ->write_begin() early
iomap: Refactor iomap_write_delalloc_punch() function out
iomap: Use iomap_punch_t typedef
iomap: Fix possible overflow condition in iomap_write_delalloc_scan
iomap: Add some uptodate state handling helpers for ifs state bitmap
iomap: Drop ifs argument from iomap_set_range_uptodate()
iomap: Rename iomap_page to iomap_folio_state and others
iomap: Copy larger chunks from userspace
iomap: Create large folios in the buffered write path
filemap: Allow __filemap_get_folio to allocate large folios
filemap: Add fgf_t typedef
...
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Link: https://lore.kernel.org/r/20230714175056.4066297-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.6
The rest of the updates for v6.6, some of the highlights include:
- A big API cleanup from Morimoto-san, rationalising the places we put
functions.
- Lots of work on the SOF framework, AMD and Intel drivers, including a
lot of cleanup and new device support.
- Standardisation of the presentation of jacks from drivers.
- Provision of some generic sound card DT properties.
- Conversion oof more drivers to the maple tree register cache.
- New drivers for AMD Van Gogh, AWInic AW88261, Cirrus Logic cs42l43,
various Intel platforms, Mediatek MT7986, RealTek RT1017 and StarFive
JH7110.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-08-25
We've added 87 non-merge commits during the last 8 day(s) which contain
a total of 104 files changed, 3719 insertions(+), 4212 deletions(-).
The main changes are:
1) Add multi uprobe BPF links for attaching multiple uprobes
and usdt probes, which is significantly faster and saves extra fds,
from Jiri Olsa.
2) Add support BPF cpu v4 instructions for arm64 JIT compiler,
from Xu Kuohai.
3) Add support BPF cpu v4 instructions for riscv64 JIT compiler,
from Pu Lehui.
4) Fix LWT BPF xmit hooks wrt their return values where propagating
the result from skb_do_redirect() would trigger a use-after-free,
from Yan Zhai.
5) Fix a BPF verifier issue related to bpf_kptr_xchg() with local kptr
where the map's value kptr type and locally allocated obj type
mismatch, from Yonghong Song.
6) Fix BPF verifier's check_func_arg_reg_off() function wrt graph
root/node which bypassed reg->off == 0 enforcement,
from Kumar Kartikeya Dwivedi.
7) Lift BPF verifier restriction in networking BPF programs to treat
comparison of packet pointers not as a pointer leak,
from Yafang Shao.
8) Remove unmaintained XDP BPF samples as they are maintained
in xdp-tools repository out of tree, from Toke Høiland-Jørgensen.
9) Batch of fixes for the tracing programs from BPF samples in order
to make them more libbpf-aware, from Daniel T. Lee.
10) Fix a libbpf signedness determination bug in the CO-RE relocation
handling logic, from Andrii Nakryiko.
11) Extend libbpf to support CO-RE kfunc relocations. Also follow-up
fixes for bpf_refcount shared ownership implementation,
both from Dave Marchevsky.
12) Add a new bpf_object__unpin() API function to libbpf,
from Daniel Xu.
13) Fix a memory leak in libbpf to also free btf_vmlinux
when the bpf_object gets closed, from Hao Luo.
14) Small error output improvements to test_bpf module, from Helge Deller.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (87 commits)
selftests/bpf: Add tests for rbtree API interaction in sleepable progs
bpf: Allow bpf_spin_{lock,unlock} in sleepable progs
bpf: Consider non-owning refs to refcounted nodes RCU protected
bpf: Reenable bpf_refcount_acquire
bpf: Use bpf_mem_free_rcu when bpf_obj_dropping refcounted nodes
bpf: Consider non-owning refs trusted
bpf: Ensure kptr_struct_meta is non-NULL for collection insert and refcount_acquire
selftests/bpf: Enable cpu v4 tests for RV64
riscv, bpf: Support unconditional bswap insn
riscv, bpf: Support signed div/mod insns
riscv, bpf: Support 32-bit offset jmp insn
riscv, bpf: Support sign-extension mov insns
riscv, bpf: Support sign-extension load insns
riscv, bpf: Fix missing exception handling and redundant zext for LDX_B/H/W
samples/bpf: Add note to README about the XDP utilities moved to xdp-tools
samples/bpf: Cleanup .gitignore
samples/bpf: Remove the xdp_sample_pkts utility
samples/bpf: Remove the xdp1 and xdp2 utilities
samples/bpf: Remove the xdp_rxq_info utility
samples/bpf: Remove the xdp_redirect* utilities
...
====================
Link: https://lore.kernel.org/r/20230825194319.12727-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The gcc compiler translates on some architectures the 64-bit
__builtin_clzll() function to a call to the libgcc function __clzdi2(),
which should take a 64-bit parameter on 32- and 64-bit platforms.
But in the current kernel code, the built-in __clzdi2() function is
defined to operate (wrongly) on 32-bit parameters if BITS_PER_LONG ==
32, thus the return values on 32-bit kernels are in the range from
[0..31] instead of the expected [0..63] range.
This patch fixes the in-kernel functions __clzdi2() and __ctzdi2() to
take a 64-bit parameter on 32-bit kernels as well, thus it makes the
functions identical for 32- and 64-bit kernels.
This bug went unnoticed since kernel 3.11 for over 10 years, and here
are some possible reasons for that:
a) Some architectures have assembly instructions to count the bits and
which are used instead of calling __clzdi2(), e.g. on x86 the bsr
instruction and on ppc cntlz is used. On such architectures the
wrong __clzdi2() implementation isn't used and as such the bug has
no effect and won't be noticed.
b) Some architectures link to libgcc.a, and the in-kernel weak
functions get replaced by the correct 64-bit variants from libgcc.a.
c) __builtin_clzll() and __clzdi2() doesn't seem to be used in many
places in the kernel, and most likely only in uncritical functions,
e.g. when printing hex values via seq_put_hex_ll(). The wrong return
value will still print the correct number, but just in a wrong
formatting (e.g. with too many leading zeroes).
d) 32-bit kernels aren't used that much any longer, so they are less
tested.
A trivial testcase to verify if the currently running 32-bit kernel is
affected by the bug is to look at the output of /proc/self/maps:
Here the kernel uses a correct implementation of __clzdi2():
root@debian:~# cat /proc/self/maps
00010000-00019000 r-xp 00000000 08:05 787324 /usr/bin/cat
00019000-0001a000 rwxp 00009000 08:05 787324 /usr/bin/cat
0001a000-0003b000 rwxp 00000000 00:00 0 [heap]
f7551000-f770d000 r-xp 00000000 08:05 794765 /usr/lib/hppa-linux-gnu/libc.so.6
...
and this kernel uses the broken implementation of __clzdi2():
root@debian:~# cat /proc/self/maps
0000000010000-0000000019000 r-xp 00000000 000000008:000000005 787324 /usr/bin/cat
0000000019000-000000001a000 rwxp 000000009000 000000008:000000005 787324 /usr/bin/cat
000000001a000-000000003b000 rwxp 00000000 00:00 0 [heap]
00000000f73d1000-00000000f758d000 r-xp 00000000 000000008:000000005 794765 /usr/lib/hppa-linux-gnu/libc.so.6
...
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 4df87bb7b6a22 ("lib: add weak clz/ctz functions")
Cc: Chanho Min <chanho.min@lge.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"18 hotfixes. 13 are cc:stable and the remainder pertain to post-6.4
issues or aren't considered suitable for a -stable backport"
* tag 'mm-hotfixes-stable-2023-08-25-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
shmem: fix smaps BUG sleeping while atomic
selftests: cachestat: catch failing fsync test on tmpfs
selftests: cachestat: test for cachestat availability
maple_tree: disable mas_wr_append() when other readers are possible
madvise:madvise_free_pte_range(): don't use mapcount() against large folio for sharing check
madvise:madvise_free_huge_pmd(): don't use mapcount() against large folio for sharing check
madvise:madvise_cold_or_pageout_pte_range(): don't use mapcount() against large folio for sharing check
mm: multi-gen LRU: don't spin during memcg release
mm: memory-failure: fix unexpected return value in soft_offline_page()
radix tree: remove unused variable
mm: add a call to flush_cache_vmap() in vmap_pfn()
selftests/mm: FOLL_LONGTERM need to be updated to 0x100
nilfs2: fix general protection fault in nilfs_lookup_dirty_data_buffers()
mm/gup: handle cont-PTE hugetlb pages correctly in gup_must_unshare() via GUP-fast
selftests: cgroup: fix test_kmem_basic less than error
mm: enable page walking API to lock vmas during the walk
smaps: use vm_normal_page_pmd() instead of follow_trans_huge_pmd()
mm/gup: reintroduce FOLL_NUMA as FOLL_HONOR_NUMA_FAULT
|
|
Allocations and frees are globally serialized on the pcpu lock (and the
CPU hotplug lock if enabled, which is the case on Debian).
At least one frequent consumer allocates 4 back-to-back counters (and
frees them in the same manner), exacerbating the problem.
While this does not fully remedy scalability issues, it is a step
towards that goal and provides immediate relief.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Vegard Nossum <vegard.nossum@oracle.com>
Link: https://lore.kernel.org/r/20230823050609.2228718-2-mjguzik@gmail.com
[Dennis: reflowed a few lines]
Signed-off-by: Dennis Zhou <dennis@kernel.org>
|
|
On powerpc64le checksum kunit tests work:
[ 2.011457][ T1] KTAP version 1
[ 2.011662][ T1] # Subtest: checksum
[ 2.011848][ T1] 1..3
[ 2.034710][ T1] ok 1 test_csum_fixed_random_inputs
[ 2.079325][ T1] ok 2 test_csum_all_carry_inputs
[ 2.127102][ T1] ok 3 test_csum_no_carry_inputs
[ 2.127202][ T1] # checksum: pass:3 fail:0 skip:0 total:3
[ 2.127533][ T1] # Totals: pass:3 fail:0 skip:0 total:3
[ 2.127956][ T1] ok 1 checksum
But on powerpc64 and powerpc32 they fail:
[ 1.859890][ T1] KTAP version 1
[ 1.860041][ T1] # Subtest: checksum
[ 1.860201][ T1] 1..3
[ 1.861927][ T58] # test_csum_fixed_random_inputs: ASSERTION FAILED at lib/checksum_kunit.c:243
[ 1.861927][ T58] Expected result == expec, but
[ 1.861927][ T58] result == 54991 (0xd6cf)
[ 1.861927][ T58] expec == 33316 (0x8224)
[ 1.863742][ T1] not ok 1 test_csum_fixed_random_inputs
[ 1.864520][ T60] # test_csum_all_carry_inputs: ASSERTION FAILED at lib/checksum_kunit.c:267
[ 1.864520][ T60] Expected result == expec, but
[ 1.864520][ T60] result == 255 (0xff)
[ 1.864520][ T60] expec == 65280 (0xff00)
[ 1.868820][ T1] not ok 2 test_csum_all_carry_inputs
[ 1.869977][ T62] # test_csum_no_carry_inputs: ASSERTION FAILED at lib/checksum_kunit.c:306
[ 1.869977][ T62] Expected result == expec, but
[ 1.869977][ T62] result == 64515 (0xfc03)
[ 1.869977][ T62] expec == 0 (0x0)
[ 1.872060][ T1] not ok 3 test_csum_no_carry_inputs
[ 1.872102][ T1] # checksum: pass:0 fail:3 skip:0 total:3
[ 1.872458][ T1] # Totals: pass:0 fail:3 skip:0 total:3
[ 1.872791][ T1] not ok 3 checksum
This is because all expected values were calculated for X86 which
is little endian. On big endian systems all precalculated 16 bits
halves must be byte swapped.
And this is confirmed by a huge amount of sparse errors when building
with C=2
So fix all sparse errors and it will naturally work on all endianness.
Fixes: 688eb8191b47 ("x86/csum: Improve performance of `csum_partial`")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Avoid setting the variables until necessary, and actually use the
variables where applicable. Introducing a variable for the slots array
avoids spanning multiple lines.
Add the missing argument to the documentation.
Use the node type when setting the metadata instead of blindly assuming
the type.
Finally, add a trace point to the function for successful store.
Link: https://lkml.kernel.org/r/20230819004356.1454718-3-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "New page table range API", v6.
This patchset changes the API used by the MM to set up page table entries.
The four APIs are:
set_ptes(mm, addr, ptep, pte, nr)
update_mmu_cache_range(vma, addr, ptep, nr)
flush_dcache_folio(folio)
flush_icache_pages(vma, page, nr)
flush_dcache_folio() isn't technically new, but no architecture
implemented it, so I've done that for them. The old APIs remain around
but are mostly implemented by calling the new interfaces.
The new APIs are based around setting up N page table entries at once.
The N entries belong to the same PMD, the same folio and the same VMA, so
ptep++ is a legitimate operation, and locking is taken care of for you.
Some architectures can do a better job of it than just a loop, but I have
hesitated to make too deep a change to architectures I don't understand
well.
One thing I have changed in every architecture is that PG_arch_1 is now a
per-folio bit instead of a per-page bit when used for dcache clean/dirty
tracking. This was something that would have to happen eventually, and it
makes sense to do it now rather than iterate over every page involved in a
cache flush and figure out if it needs to happen.
The point of all this is better performance, and Fengwei Yin has measured
improvement on x86. I suspect you'll see improvement on your architecture
too. Try the new will-it-scale test mentioned here:
https://lore.kernel.org/linux-mm/20230206140639.538867-5-fengwei.yin@intel.com/
You'll need to run it on an XFS filesystem and have
CONFIG_TRANSPARENT_HUGEPAGE set.
This patchset is the basis for much of the anonymous large folio work
being done by Ryan, so it's received quite a lot of testing over the last
few months.
This patch (of 38):
Determine if a value lies within a range more efficiently (subtraction +
comparison vs two comparisons and an AND). It also has useful (under some
circumstances) behaviour if the range exceeds the maximum value of the
type. Convert all the conflicting definitions of in_range() within the
kernel; some can use the generic definition while others need their own
definition.
Link: https://lkml.kernel.org/r/20230802151406.3735276-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230802151406.3735276-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
