From 8366610283d08564f65a1af2ec8458df08418727 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 15 Jun 2015 19:51:46 +0200 Subject: i2c: slave: fix the example how to instantiate from userspace I copied the wrong shell code into the documentation. Sorry to all who tried to get sense out of this current example :/ Slight rewording while we are here. Reported-by: Tim Bakker Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- Documentation/i2c/slave-interface | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation/i2c') diff --git a/Documentation/i2c/slave-interface b/Documentation/i2c/slave-interface index 389bb5d61854..b228ca54bcf4 100644 --- a/Documentation/i2c/slave-interface +++ b/Documentation/i2c/slave-interface @@ -31,10 +31,10 @@ User manual =========== I2C slave backends behave like standard I2C clients. So, you can instantiate -them like described in the document 'instantiating-devices'. A quick example -for instantiating the slave-eeprom driver from userspace: +them as described in the document 'instantiating-devices'. A quick example for +instantiating the slave-eeprom driver from userspace at address 0x64 on bus 1: - # echo 0-0064 > /sys/bus/i2c/drivers/i2c-slave-eeprom/bind + # echo slave-24c02 0x64 > /sys/bus/i2c/devices/i2c-1/new_device Each backend should come with separate documentation to describe its specific behaviour and setup. -- cgit v1.2.3