From a19a19de8310fb8ca2ca0621a9db1aab082943c5 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 11 Sep 2015 11:33:01 +0200 Subject: bnx2x: use ktime_get_seconds() for timestamp commit c48f350ff5e7 "bnx2x: Add MFW dump support" added the bnx2x_update_mfw_dump() function that reads the current time and stores it in a 32-bit field that gets passed into a buffer in a fixed format. This is potentially broken when the epoch overflows in 2038, and otherwise overflows in 2106. As we're trying to avoid uses of struct timeval for this reason, I noticed the addition of this function, and tried to rewrite it in a way that is more explicit about the overflow and that will keep working once we deprecate struct timeval. I assume that it is not possible to change the ABI any more, otherwise we should try to use a 64-bit field for the seconds right away. Signed-off-by: Arnd Bergmann Cc: Yuval Mintz Cc: Ariel Elior Acked-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index e3da2bddf143..89a174fa1300 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -3705,16 +3705,14 @@ out: void bnx2x_update_mfw_dump(struct bnx2x *bp) { - struct timeval epoc; u32 drv_ver; u32 valid_dump; if (!SHMEM2_HAS(bp, drv_info)) return; - /* Update Driver load time */ - do_gettimeofday(&epoc); - SHMEM2_WR(bp, drv_info.epoc, epoc.tv_sec); + /* Update Driver load time, possibly broken in y2038 */ + SHMEM2_WR(bp, drv_info.epoc, (u32)ktime_get_real_seconds()); drv_ver = bnx2x_update_mng_version_utility(DRV_MODULE_VERSION, true); SHMEM2_WR(bp, drv_info.drv_ver, drv_ver); -- cgit v1.2.3 From e8684c88774c0ddfeefdbed0aa469b25b9962f3e Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sat, 12 Sep 2015 00:34:48 +0300 Subject: irda: ali-ircc: Fix deadlock in ali_ircc_sir_change_speed() ali_ircc_sir_change_speed() is always called with self->lock held, so acquiring the lock inside it leads to unavoidable deadlock. Call graph: ali_ircc_sir_change_speed() is called from ali_ircc_change_speed() ali_ircc_fir_hard_xmit() under spin_lock_irqsave(&self->lock, flags); ali_ircc_sir_hard_xmit() under spin_lock_irqsave(&self->lock, flags); ali_ircc_net_ioctl() under spin_lock_irqsave(&self->lock, flags); ali_ircc_dma_xmit_complete() ali_ircc_fir_interrupt() ali_ircc_interrupt() under spin_lock(&self->lock); ali_ircc_sir_write_wakeup() ali_ircc_sir_interrupt() ali_ircc_interrupt() under spin_lock(&self->lock); The patch removes spin_lock/unlock from ali_ircc_sir_change_speed(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: David S. Miller --- drivers/net/irda/ali-ircc.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c index 58ae11a14bb6..64bb44d5d867 100644 --- a/drivers/net/irda/ali-ircc.c +++ b/drivers/net/irda/ali-ircc.c @@ -1031,7 +1031,6 @@ static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud) static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed) { struct ali_ircc_cb *self = priv; - unsigned long flags; int iobase; int fcr; /* FIFO control reg */ int lcr; /* Line control reg */ @@ -1061,8 +1060,6 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed) /* Update accounting for new speed */ self->io.speed = speed; - spin_lock_irqsave(&self->lock, flags); - divisor = 115200/speed; fcr = UART_FCR_ENABLE_FIFO; @@ -1089,9 +1086,6 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed) /* without this, the connection will be broken after come back from FIR speed, but with this, the SIR connection is harder to established */ outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR); - - spin_unlock_irqrestore(&self->lock, flags); - } static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed) -- cgit v1.2.3 From daf158d0d544cec80b7b30deff8cfc59a6e17610 Mon Sep 17 00:00:00 2001 From: Simon Guinot Date: Tue, 15 Sep 2015 22:41:21 +0200 Subject: net: mvneta: fix DMA buffer unmapping in mvneta_rx() This patch fixes a regression introduced by the commit a84e32894191 ("net: mvneta: fix refilling for Rx DMA buffers"). Due to this commit the newly allocated Rx buffers are DMA-unmapped in place of those passed to the networking stack. Obviously, this causes data corruptions. This patch fixes the issue by ensuring that the right Rx buffers are DMA-unmapped. Reported-by: Oren Laskin Signed-off-by: Simon Guinot Fixes: a84e32894191 ("net: mvneta: fix refilling for Rx DMA buffers") Cc: # v3.8+ Tested-by: Oren Laskin Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index fe2299ac4f5c..09ec32e33076 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -1479,6 +1479,7 @@ static int mvneta_rx(struct mvneta_port *pp, int rx_todo, struct mvneta_rx_desc *rx_desc = mvneta_rxq_next_desc_get(rxq); struct sk_buff *skb; unsigned char *data; + dma_addr_t phys_addr; u32 rx_status; int rx_bytes, err; @@ -1486,6 +1487,7 @@ static int mvneta_rx(struct mvneta_port *pp, int rx_todo, rx_status = rx_desc->status; rx_bytes = rx_desc->data_size - (ETH_FCS_LEN + MVNETA_MH_SIZE); data = (unsigned char *)rx_desc->buf_cookie; + phys_addr = rx_desc->buf_phys_addr; if (!mvneta_rxq_desc_is_first_last(rx_status) || (rx_status & MVNETA_RXD_ERR_SUMMARY)) { @@ -1534,7 +1536,7 @@ static int mvneta_rx(struct mvneta_port *pp, int rx_todo, if (!skb) goto err_drop_frame; - dma_unmap_single(dev->dev.parent, rx_desc->buf_phys_addr, + dma_unmap_single(dev->dev.parent, phys_addr, MVNETA_RX_BUF_SIZE(pp->pkt_size), DMA_FROM_DEVICE); rcvd_pkts++; -- cgit v1.2.3 From 892aa01df2ad67237f213c8f9d9b491e908aa910 Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Fri, 11 Sep 2015 22:25:48 +0200 Subject: net: stmmac: Use msleep rather then udelay for reset delay The reset delays used for stmmac are in the order of 10ms to 1 second, which is far too long for udelay usage, so switch to using msleep. Practically this fixes the PHY not being reliably detected in some cases as udelay wouldn't actually delay for long enough to let the phy reliably be reset. Signed-off-by: Sjoerd Simons Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c index b735fa22ac95..ebf6abc4853f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c @@ -161,11 +161,16 @@ int stmmac_mdio_reset(struct mii_bus *bus) if (!gpio_request(reset_gpio, "mdio-reset")) { gpio_direction_output(reset_gpio, active_low ? 1 : 0); - udelay(data->delays[0]); + if (data->delays[0]) + msleep(DIV_ROUND_UP(data->delays[0], 1000)); + gpio_set_value(reset_gpio, active_low ? 0 : 1); - udelay(data->delays[1]); + if (data->delays[1]) + msleep(DIV_ROUND_UP(data->delays[1], 1000)); + gpio_set_value(reset_gpio, active_low ? 1 : 0); - udelay(data->delays[2]); + if (data->delays[2]) + msleep(DIV_ROUND_UP(data->delays[2], 1000)); } } #endif -- cgit v1.2.3 From 58d29e3ce903dcafacee9e355225d64922325cf0 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 13 Sep 2015 14:15:03 +0200 Subject: atm: he: drop null test before destroy functions Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @@ expression x; @@ -if (x != NULL) \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/atm/he.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/atm/he.c b/drivers/atm/he.c index a8da3a50e374..0f5cb37636bc 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -1578,9 +1578,7 @@ he_stop(struct he_dev *he_dev) kfree(he_dev->rbpl_virt); kfree(he_dev->rbpl_table); - - if (he_dev->rbpl_pool) - dma_pool_destroy(he_dev->rbpl_pool); + dma_pool_destroy(he_dev->rbpl_pool); if (he_dev->rbrq_base) dma_free_coherent(&he_dev->pci_dev->dev, CONFIG_RBRQ_SIZE * sizeof(struct he_rbrq), @@ -1594,8 +1592,7 @@ he_stop(struct he_dev *he_dev) dma_free_coherent(&he_dev->pci_dev->dev, CONFIG_TBRQ_SIZE * sizeof(struct he_tbrq), he_dev->tpdrq_base, he_dev->tpdrq_phys); - if (he_dev->tpd_pool) - dma_pool_destroy(he_dev->tpd_pool); + dma_pool_destroy(he_dev->tpd_pool); if (he_dev->pci_dev) { pci_read_config_word(he_dev->pci_dev, PCI_COMMAND, &command); -- cgit v1.2.3 From d828755eae637c6ca39e30702e98abaf34cac146 Mon Sep 17 00:00:00 2001 From: Hariprasad Shenai Date: Tue, 15 Sep 2015 17:20:09 +0530 Subject: cxgb4: add device ID for few T5 adapters Signed-off-by: Hariprasad Shenai Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h b/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h index 8353a6cbfcc2..03ed00c49823 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h @@ -157,6 +157,11 @@ CH_PCI_DEVICE_ID_TABLE_DEFINE_BEGIN CH_PCI_ID_TABLE_FENTRY(0x5090), /* Custom T540-CR */ CH_PCI_ID_TABLE_FENTRY(0x5091), /* Custom T522-CR */ CH_PCI_ID_TABLE_FENTRY(0x5092), /* Custom T520-CR */ + CH_PCI_ID_TABLE_FENTRY(0x5093), /* Custom T580-LP-CR */ + CH_PCI_ID_TABLE_FENTRY(0x5094), /* Custom T540-CR */ + CH_PCI_ID_TABLE_FENTRY(0x5095), /* Custom T540-CR-SO */ + CH_PCI_ID_TABLE_FENTRY(0x5096), /* Custom T580-CR */ + CH_PCI_ID_TABLE_FENTRY(0x5097), /* Custom T520-KR */ /* T6 adapters: */ -- cgit v1.2.3 From 58189ca7b27411c3dc9a5cb9eeee0906da684c59 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 15 Sep 2015 15:10:50 -0700 Subject: net: Fix vti use case with oif in dst lookups Steffen reported that the recent change to add oif to dst lookups breaks the VTI use case. The problem is that with the oif set in the flow struct the comparison to the nh_oif is triggered. Fix by splitting the FLOWI_FLAG_VRFSRC into 2 flags -- one that triggers the vrf device cache bypass (FLOWI_FLAG_VRFSRC) and another telling the lookup to not compare nh oif (FLOWI_FLAG_SKIP_NH_OIF). Fixes: 42a7b32b73d6 ("xfrm: Add oif to dst lookups") Signed-off-by: David Ahern Acked-by: Steffen Klassert Signed-off-by: David S. Miller --- drivers/net/vrf.c | 3 ++- include/net/flow.h | 1 + include/net/route.h | 2 +- net/ipv4/fib_trie.c | 2 +- net/ipv4/udp.c | 3 ++- net/ipv4/xfrm4_policy.c | 2 ++ 6 files changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index e7094fbd7568..488c6f50df73 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -193,7 +193,8 @@ static netdev_tx_t vrf_process_v4_outbound(struct sk_buff *skb, .flowi4_oif = vrf_dev->ifindex, .flowi4_iif = LOOPBACK_IFINDEX, .flowi4_tos = RT_TOS(ip4h->tos), - .flowi4_flags = FLOWI_FLAG_ANYSRC | FLOWI_FLAG_VRFSRC, + .flowi4_flags = FLOWI_FLAG_ANYSRC | FLOWI_FLAG_VRFSRC | + FLOWI_FLAG_SKIP_NH_OIF, .daddr = ip4h->daddr, }; diff --git a/include/net/flow.h b/include/net/flow.h index acd6a096250e..9b85db85f13c 100644 --- a/include/net/flow.h +++ b/include/net/flow.h @@ -35,6 +35,7 @@ struct flowi_common { #define FLOWI_FLAG_ANYSRC 0x01 #define FLOWI_FLAG_KNOWN_NH 0x02 #define FLOWI_FLAG_VRFSRC 0x04 +#define FLOWI_FLAG_SKIP_NH_OIF 0x08 __u32 flowic_secid; struct flowi_tunnel flowic_tun_key; }; diff --git a/include/net/route.h b/include/net/route.h index cc61cb95f059..f46af256880c 100644 --- a/include/net/route.h +++ b/include/net/route.h @@ -255,7 +255,7 @@ static inline void ip_route_connect_init(struct flowi4 *fl4, __be32 dst, __be32 flow_flags |= FLOWI_FLAG_ANYSRC; if (netif_index_is_vrf(sock_net(sk), oif)) - flow_flags |= FLOWI_FLAG_VRFSRC; + flow_flags |= FLOWI_FLAG_VRFSRC | FLOWI_FLAG_SKIP_NH_OIF; flowi4_init_output(fl4, oif, sk->sk_mark, tos, RT_SCOPE_UNIVERSE, protocol, flow_flags, dst, src, dport, sport); diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index 26d6ffb6d23c..6c2af797f2f9 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -1426,7 +1426,7 @@ found: nh->nh_flags & RTNH_F_LINKDOWN && !(fib_flags & FIB_LOOKUP_IGNORE_LINKSTATE)) continue; - if (!(flp->flowi4_flags & FLOWI_FLAG_VRFSRC)) { + if (!(flp->flowi4_flags & FLOWI_FLAG_SKIP_NH_OIF)) { if (flp->flowi4_oif && flp->flowi4_oif != nh->nh_oif) continue; diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index c0a15e7f359f..f7d1d5e19e95 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1024,7 +1024,8 @@ int udp_sendmsg(struct sock *sk, struct msghdr *msg, size_t len) if (netif_index_is_vrf(net, ipc.oif)) { flowi4_init_output(fl4, ipc.oif, sk->sk_mark, tos, RT_SCOPE_UNIVERSE, sk->sk_protocol, - (flow_flags | FLOWI_FLAG_VRFSRC), + (flow_flags | FLOWI_FLAG_VRFSRC | + FLOWI_FLAG_SKIP_NH_OIF), faddr, saddr, dport, inet->inet_sport); diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c index bb919b28619f..c10a9ee68433 100644 --- a/net/ipv4/xfrm4_policy.c +++ b/net/ipv4/xfrm4_policy.c @@ -33,6 +33,8 @@ static struct dst_entry *__xfrm4_dst_lookup(struct net *net, struct flowi4 *fl4, if (saddr) fl4->saddr = saddr->a4; + fl4->flowi4_flags = FLOWI_FLAG_SKIP_NH_OIF; + rt = __ip_route_output_key(net, fl4); if (!IS_ERR(rt)) return &rt->dst; -- cgit v1.2.3 From 4671fc6d47e0a0108fe24a4d830347d6a6ef4aa7 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 15 Sep 2015 18:29:47 -0700 Subject: net/mlx4_en: really allow to change RSS key When changing rss key, we do not want to overwrite user provided key by the one provided by netdev_rss_key_fill(), which is the host random key generated at boot time. Fixes: 947cbb0ac242 ("net/mlx4_en: Support for configurable RSS hash function") Signed-off-by: Eric Dumazet Cc: Eyal Perry CC: Amir Vadai Acked-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_rx.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index 4402a1e48c9b..0ce6ffe73ca8 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -1268,8 +1268,6 @@ int mlx4_en_config_rss_steer(struct mlx4_en_priv *priv) rss_context->hash_fn = MLX4_RSS_HASH_TOP; memcpy(rss_context->rss_key, priv->rss_key, MLX4_EN_RSS_KEY_SIZE); - netdev_rss_key_fill(rss_context->rss_key, - MLX4_EN_RSS_KEY_SIZE); } else { en_err(priv, "Unknown RSS hash function requested\n"); err = -EINVAL; -- cgit v1.2.3 From 88c796640eac36209efabe5e42b7b47dee58603e Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Wed, 16 Sep 2015 11:11:22 +0200 Subject: net: ks8851: Export OF module alias information Drivers needs to export the OF id table and this be built into the module or udev won't have the necessary information to autoload the driver module when the device is registered via OF. Signed-off-by: Javier Martinez Canillas Signed-off-by: David S. Miller --- drivers/net/ethernet/micrel/ks8851.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c index 66d4ab703f45..60f43ec22175 100644 --- a/drivers/net/ethernet/micrel/ks8851.c +++ b/drivers/net/ethernet/micrel/ks8851.c @@ -1601,6 +1601,7 @@ static const struct of_device_id ks8851_match_table[] = { { .compatible = "micrel,ks8851" }, { } }; +MODULE_DEVICE_TABLE(of, ks8851_match_table); static struct spi_driver ks8851_driver = { .driver = { -- cgit v1.2.3 From ce816eb064c82ab96276969971a561db78e66164 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 16 Sep 2015 12:35:00 +0100 Subject: solos-pci: Increase headroom on received packets A comment in include/linux/skbuff.h says that: * Various parts of the networking layer expect at least 32 bytes of * headroom, you should not reduce this. This was demonstrated by a panic when handling fragmented IPv6 packets: http://marc.info/?l=linux-netdev&m=144236093519172&w=2 It's not entirely clear if that comment is still valid — and if it is, perhaps netif_rx() ought to be enforcing it with a warning. But either way, it is rather stupid from a performance point of view for us to be receiving packets into a buffer which doesn't have enough room to prepend an Ethernet header — it means that *every* incoming packet is going to be need to be reallocated. So let's fix that. Signed-off-by: David Woodhouse Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/atm/solos-pci.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c index 74e18b0a6d89..3d7fb6516f74 100644 --- a/drivers/atm/solos-pci.c +++ b/drivers/atm/solos-pci.c @@ -805,7 +805,12 @@ static void solos_bh(unsigned long card_arg) continue; } - skb = alloc_skb(size + 1, GFP_ATOMIC); + /* Use netdev_alloc_skb() because it adds NET_SKB_PAD of + * headroom, and ensures we can route packets back out an + * Ethernet interface (for example) without having to + * reallocate. Adding NET_IP_ALIGN also ensures that both + * PPPoATM and PPPoEoBR2684 packets end up aligned. */ + skb = netdev_alloc_skb_ip_align(NULL, size + 1); if (!skb) { if (net_ratelimit()) dev_warn(&card->dev->dev, "Failed to allocate sk_buff for RX\n"); @@ -869,7 +874,10 @@ static void solos_bh(unsigned long card_arg) /* Allocate RX skbs for any ports which need them */ if (card->using_dma && card->atmdev[port] && !card->rx_skb[port]) { - struct sk_buff *skb = alloc_skb(RX_DMA_SIZE, GFP_ATOMIC); + /* Unlike the MMIO case (qv) we can't add NET_IP_ALIGN + * here; the FPGA can only DMA to addresses which are + * aligned to 4 bytes. */ + struct sk_buff *skb = dev_alloc_skb(RX_DMA_SIZE); if (skb) { SKB_CB(skb)->dma_addr = dma_map_single(&card->dev->dev, skb->data, -- cgit v1.2.3 From 980137a20317055451a73547cf07be4ddea039ee Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Thu, 17 Sep 2015 15:18:34 +0200 Subject: ARCNET: fix hard_header_len limit For arcnet the bare minimum header only contains the 4 bytes to specify source, dest and offset (1, 1 and 2 bytes respectively). The corresponding struct is struct arc_hardware. The struct archdr contains additionally a union of possible soft headers. When doing $insertusecasehere packets might well include short (or even no?) soft headers. For this reason only use arc_hardware instead of archdr to determine the hard_header_len for an arcnet device. Signed-off-by: Michael Grzeschik Signed-off-by: David S. Miller --- drivers/net/arcnet/arcnet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c index 10f71c732b59..816d0e94961c 100644 --- a/drivers/net/arcnet/arcnet.c +++ b/drivers/net/arcnet/arcnet.c @@ -326,7 +326,7 @@ static void arcdev_setup(struct net_device *dev) dev->type = ARPHRD_ARCNET; dev->netdev_ops = &arcnet_netdev_ops; dev->header_ops = &arcnet_header_ops; - dev->hard_header_len = sizeof(struct archdr); + dev->hard_header_len = sizeof(struct arc_hardware); dev->mtu = choose_mtu(); dev->addr_len = ARCNET_ALEN; -- cgit v1.2.3 From 9dc2ad1008c9f91f55ec6c89ec0f8639dfc91596 Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Thu, 17 Sep 2015 16:11:10 +0200 Subject: vxlan: set needed headroom correctly vxlan_setup is called when allocating the net_device, i.e. way before vxlan_newlink (or vxlan_dev_configure) is called. This means vxlan->default_dst is actually unset in vxlan_setup and the condition that sets needed_headroom always takes the else branch. Set the needed_headrom at the point when we have the information about the address family available. Fixes: e4c7ed415387c ("vxlan: add ipv6 support") Fixes: 2853af6a2ea1a ("vxlan: use dev->needed_headroom instead of dev->hard_header_len") CC: Cong Wang Signed-off-by: Jiri Benc Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index cf8b7f0473b3..6ebe562af04e 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -2392,10 +2392,6 @@ static void vxlan_setup(struct net_device *dev) eth_hw_addr_random(dev); ether_setup(dev); - if (vxlan->default_dst.remote_ip.sa.sa_family == AF_INET6) - dev->needed_headroom = ETH_HLEN + VXLAN6_HEADROOM; - else - dev->needed_headroom = ETH_HLEN + VXLAN_HEADROOM; dev->netdev_ops = &vxlan_netdev_ops; dev->destructor = free_netdev; @@ -2670,8 +2666,12 @@ static int vxlan_dev_configure(struct net *src_net, struct net_device *dev, dev->needed_headroom = lowerdev->hard_header_len + (use_ipv6 ? VXLAN6_HEADROOM : VXLAN_HEADROOM); - } else if (use_ipv6) + } else if (use_ipv6) { vxlan->flags |= VXLAN_F_IPV6; + dev->needed_headroom = ETH_HLEN + VXLAN6_HEADROOM; + } else { + dev->needed_headroom = ETH_HLEN + VXLAN_HEADROOM; + } memcpy(&vxlan->cfg, conf, sizeof(*conf)); if (!vxlan->cfg.dst_port) -- cgit v1.2.3 From 057ba29bbe85e9587635e3128b26fa30fe849af9 Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Thu, 17 Sep 2015 16:11:11 +0200 Subject: vxlan: reject IPv6 addresses if IPv6 is not configured When IPv6 address is set without IPv6 configured, the vxlan socket is mostly treated as an IPv4 one but various lookus in fdb etc. still take the AF_INET6 into account. This creates incosistencies with weird consequences. Just reject IPv6 addresses in such case. Signed-off-by: Jiri Benc Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 6ebe562af04e..bbac1d35ed4e 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -2636,8 +2636,11 @@ static int vxlan_dev_configure(struct net *src_net, struct net_device *dev, dst->remote_ip.sa.sa_family = AF_INET; if (dst->remote_ip.sa.sa_family == AF_INET6 || - vxlan->cfg.saddr.sa.sa_family == AF_INET6) + vxlan->cfg.saddr.sa.sa_family == AF_INET6) { + if (!IS_ENABLED(CONFIG_IPV6)) + return -EPFNOSUPPORT; use_ipv6 = true; + } if (conf->remote_ifindex) { struct net_device *lowerdev -- cgit v1.2.3 From 378fddc281072a10b621341b9f78c902303a8fe7 Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Thu, 17 Sep 2015 16:11:12 +0200 Subject: qlcnic: track vxlan port count The callback for adding vxlan port can be called with the same port for both IPv4 and IPv6. Do not disable the offloading when the same port for both protocols is added and later one of them removed. Signed-off-by: Jiri Benc Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 1 + drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 18 +++++++++++++----- 2 files changed, 14 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 06bcc734fe8d..d6696cfa11d2 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -536,6 +536,7 @@ struct qlcnic_hardware_context { u8 extend_lb_time; u8 phys_port_id[ETH_ALEN]; u8 lb_mode; + u8 vxlan_port_count; u16 vxlan_port; struct device *hwmon_dev; u32 post_mode; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 8b08b20e8b30..d4481454b5f8 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -483,11 +483,17 @@ static void qlcnic_add_vxlan_port(struct net_device *netdev, /* Adapter supports only one VXLAN port. Use very first port * for enabling offload */ - if (!qlcnic_encap_rx_offload(adapter) || ahw->vxlan_port) + if (!qlcnic_encap_rx_offload(adapter)) return; + if (!ahw->vxlan_port_count) { + ahw->vxlan_port_count = 1; + ahw->vxlan_port = ntohs(port); + adapter->flags |= QLCNIC_ADD_VXLAN_PORT; + return; + } + if (ahw->vxlan_port == ntohs(port)) + ahw->vxlan_port_count++; - ahw->vxlan_port = ntohs(port); - adapter->flags |= QLCNIC_ADD_VXLAN_PORT; } static void qlcnic_del_vxlan_port(struct net_device *netdev, @@ -496,11 +502,13 @@ static void qlcnic_del_vxlan_port(struct net_device *netdev, struct qlcnic_adapter *adapter = netdev_priv(netdev); struct qlcnic_hardware_context *ahw = adapter->ahw; - if (!qlcnic_encap_rx_offload(adapter) || !ahw->vxlan_port || + if (!qlcnic_encap_rx_offload(adapter) || !ahw->vxlan_port_count || (ahw->vxlan_port != ntohs(port))) return; - adapter->flags |= QLCNIC_DEL_VXLAN_PORT; + ahw->vxlan_port_count--; + if (!ahw->vxlan_port_count) + adapter->flags |= QLCNIC_DEL_VXLAN_PORT; } static netdev_features_t qlcnic_features_check(struct sk_buff *skb, -- cgit v1.2.3 From 1e5b311ab2cc3baf73cdff066ab39c7466bf166b Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Thu, 17 Sep 2015 16:11:13 +0200 Subject: be2net: allow offloading with the same port for IPv4 and IPv6 The callback for adding vxlan port can be called with the same port for both IPv4 and IPv6. Do not disable the offloading if this occurs. Signed-off-by: Jiri Benc Acked-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be.h | 1 + drivers/net/ethernet/emulex/benet/be_main.c | 10 ++++++++++ 2 files changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index 0a27805cbbbd..821540913343 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -582,6 +582,7 @@ struct be_adapter { u16 pvid; __be16 vxlan_port; int vxlan_port_count; + int vxlan_port_aliases; struct phy_info phy; u8 wol_cap; bool wol_en; diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 12687bf52b95..7bf51a1a0a77 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -5176,6 +5176,11 @@ static void be_add_vxlan_port(struct net_device *netdev, sa_family_t sa_family, if (lancer_chip(adapter) || BEx_chip(adapter) || be_is_mc(adapter)) return; + if (adapter->vxlan_port == port && adapter->vxlan_port_count) { + adapter->vxlan_port_aliases++; + return; + } + if (adapter->flags & BE_FLAGS_VXLAN_OFFLOADS) { dev_info(dev, "Only one UDP port supported for VxLAN offloads\n"); @@ -5226,6 +5231,11 @@ static void be_del_vxlan_port(struct net_device *netdev, sa_family_t sa_family, if (adapter->vxlan_port != port) goto done; + if (adapter->vxlan_port_aliases) { + adapter->vxlan_port_aliases--; + return; + } + be_disable_vxlan_offloads(adapter); dev_info(&adapter->pdev->dev, -- cgit v1.2.3 From ac7eccd4d48fcc70d9fd6e4d10657bcde0a73f9f Mon Sep 17 00:00:00 2001 From: Jiri Benc Date: Thu, 17 Sep 2015 16:11:14 +0200 Subject: bnx2x: track vxlan port count The callback for adding vxlan port can be called with the same port for both IPv4 and IPv6. Do not disable the offloading when the same port for both protocols is added and later one of them removed. Signed-off-by: Jiri Benc Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 1 + drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 14 ++++++++++++-- 2 files changed, 13 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index ba936635322a..b5e64b02200c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1946,6 +1946,7 @@ struct bnx2x { u16 vlan_cnt; u16 vlan_credit; u16 vxlan_dst_port; + u8 vxlan_dst_port_count; bool accept_any_vlan; }; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 89a174fa1300..f1d62d5dbaff 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -10108,12 +10108,18 @@ static void __bnx2x_add_vxlan_port(struct bnx2x *bp, u16 port) if (!netif_running(bp->dev)) return; - if (bp->vxlan_dst_port || !IS_PF(bp)) { + if (bp->vxlan_dst_port_count && bp->vxlan_dst_port == port) { + bp->vxlan_dst_port_count++; + return; + } + + if (bp->vxlan_dst_port_count || !IS_PF(bp)) { DP(BNX2X_MSG_SP, "Vxlan destination port limit reached\n"); return; } bp->vxlan_dst_port = port; + bp->vxlan_dst_port_count = 1; bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_ADD_VXLAN_PORT, 0); } @@ -10128,10 +10134,14 @@ static void bnx2x_add_vxlan_port(struct net_device *netdev, static void __bnx2x_del_vxlan_port(struct bnx2x *bp, u16 port) { - if (!bp->vxlan_dst_port || bp->vxlan_dst_port != port || !IS_PF(bp)) { + if (!bp->vxlan_dst_port_count || bp->vxlan_dst_port != port || + !IS_PF(bp)) { DP(BNX2X_MSG_SP, "Invalid vxlan port\n"); return; } + bp->vxlan_dst_port--; + if (bp->vxlan_dst_port) + return; if (netif_running(bp->dev)) { bnx2x_schedule_sp_rtnl(bp, BNX2X_SP_RTNL_DEL_VXLAN_PORT, 0); -- cgit v1.2.3 From adb094e5e7285385770eb7a7c122bfc663c5e174 Mon Sep 17 00:00:00 2001 From: Taku Izumi Date: Thu, 17 Sep 2015 23:21:21 +0900 Subject: fjes: fix off-by-one error at fjes_hw_update_zone_task() Dan Carpenter reported off-by-one error of fjes at http://www.mail-archive.com/netdev@vger.kernel.org/msg77520.html Actually this is a bug. ep_shm_info[epidx].{es_status, zone} should be update inside for loop. This patch fixes this bug. Reported-by: Dan Carpenter Signed-off-by: Taku Izumi Signed-off-by: David S. Miller --- drivers/net/fjes/fjes_hw.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/fjes/fjes_hw.c b/drivers/net/fjes/fjes_hw.c index b5f4a78da828..2d3848c9dc35 100644 --- a/drivers/net/fjes/fjes_hw.c +++ b/drivers/net/fjes/fjes_hw.c @@ -1011,11 +1011,11 @@ static void fjes_hw_update_zone_task(struct work_struct *work) set_bit(epidx, &irq_bit); break; } - } - - hw->ep_shm_info[epidx].es_status = info[epidx].es_status; - hw->ep_shm_info[epidx].zone = info[epidx].zone; + hw->ep_shm_info[epidx].es_status = + info[epidx].es_status; + hw->ep_shm_info[epidx].zone = info[epidx].zone; + } break; } -- cgit v1.2.3 From ba5ca7848be05db6235aeb703586b821aa00e381 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Wed, 16 Sep 2015 15:27:43 +0200 Subject: bna: check for dma mapping errors Check for DMA mapping errors, recover from them and register them in ethtool stats like other errors. Cc: Rasesh Mody Signed-off-by: Ivan Vecera Acked-by: Rasesh Mody Signed-off-by: David S. Miller --- drivers/net/ethernet/brocade/bna/bna_tx_rx.c | 2 ++ drivers/net/ethernet/brocade/bna/bna_types.h | 1 + drivers/net/ethernet/brocade/bna/bnad.c | 29 ++++++++++++++++++++++++- drivers/net/ethernet/brocade/bna/bnad.h | 2 ++ drivers/net/ethernet/brocade/bna/bnad_ethtool.c | 4 ++++ 5 files changed, 37 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/brocade/bna/bna_tx_rx.c b/drivers/net/ethernet/brocade/bna/bna_tx_rx.c index 5d0753cc7e73..04b0d16b210e 100644 --- a/drivers/net/ethernet/brocade/bna/bna_tx_rx.c +++ b/drivers/net/ethernet/brocade/bna/bna_tx_rx.c @@ -2400,6 +2400,7 @@ bna_rx_create(struct bna *bna, struct bnad *bnad, q0->rcb->id = 0; q0->rx_packets = q0->rx_bytes = 0; q0->rx_packets_with_error = q0->rxbuf_alloc_failed = 0; + q0->rxbuf_map_failed = 0; bna_rxq_qpt_setup(q0, rxp, dpage_count, PAGE_SIZE, &dqpt_mem[i], &dsqpt_mem[i], &dpage_mem[i]); @@ -2428,6 +2429,7 @@ bna_rx_create(struct bna *bna, struct bnad *bnad, : rx_cfg->q1_buf_size; q1->rx_packets = q1->rx_bytes = 0; q1->rx_packets_with_error = q1->rxbuf_alloc_failed = 0; + q1->rxbuf_map_failed = 0; bna_rxq_qpt_setup(q1, rxp, hpage_count, PAGE_SIZE, &hqpt_mem[i], &hsqpt_mem[i], diff --git a/drivers/net/ethernet/brocade/bna/bna_types.h b/drivers/net/ethernet/brocade/bna/bna_types.h index e0e797f2ea14..c438d032e8bf 100644 --- a/drivers/net/ethernet/brocade/bna/bna_types.h +++ b/drivers/net/ethernet/brocade/bna/bna_types.h @@ -587,6 +587,7 @@ struct bna_rxq { u64 rx_bytes; u64 rx_packets_with_error; u64 rxbuf_alloc_failed; + u64 rxbuf_map_failed; }; /* RxQ pair */ diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c index 506047c38607..21a0cfc3e7ec 100644 --- a/drivers/net/ethernet/brocade/bna/bnad.c +++ b/drivers/net/ethernet/brocade/bna/bnad.c @@ -399,7 +399,13 @@ bnad_rxq_refill_page(struct bnad *bnad, struct bna_rcb *rcb, u32 nalloc) } dma_addr = dma_map_page(&bnad->pcidev->dev, page, page_offset, - unmap_q->map_size, DMA_FROM_DEVICE); + unmap_q->map_size, DMA_FROM_DEVICE); + if (dma_mapping_error(&bnad->pcidev->dev, dma_addr)) { + put_page(page); + BNAD_UPDATE_CTR(bnad, rxbuf_map_failed); + rcb->rxq->rxbuf_map_failed++; + goto finishing; + } unmap->page = page; unmap->page_offset = page_offset; @@ -454,8 +460,15 @@ bnad_rxq_refill_skb(struct bnad *bnad, struct bna_rcb *rcb, u32 nalloc) rcb->rxq->rxbuf_alloc_failed++; goto finishing; } + dma_addr = dma_map_single(&bnad->pcidev->dev, skb->data, buff_sz, DMA_FROM_DEVICE); + if (dma_mapping_error(&bnad->pcidev->dev, dma_addr)) { + dev_kfree_skb_any(skb); + BNAD_UPDATE_CTR(bnad, rxbuf_map_failed); + rcb->rxq->rxbuf_map_failed++; + goto finishing; + } unmap->skb = skb; dma_unmap_addr_set(&unmap->vector, dma_addr, dma_addr); @@ -3025,6 +3038,11 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev) unmap = head_unmap; dma_addr = dma_map_single(&bnad->pcidev->dev, skb->data, len, DMA_TO_DEVICE); + if (dma_mapping_error(&bnad->pcidev->dev, dma_addr)) { + dev_kfree_skb_any(skb); + BNAD_UPDATE_CTR(bnad, tx_skb_map_failed); + return NETDEV_TX_OK; + } BNA_SET_DMA_ADDR(dma_addr, &txqent->vector[0].host_addr); txqent->vector[0].length = htons(len); dma_unmap_addr_set(&unmap->vectors[0], dma_addr, dma_addr); @@ -3056,6 +3074,15 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev) dma_addr = skb_frag_dma_map(&bnad->pcidev->dev, frag, 0, size, DMA_TO_DEVICE); + if (dma_mapping_error(&bnad->pcidev->dev, dma_addr)) { + /* Undo the changes starting at tcb->producer_index */ + bnad_tx_buff_unmap(bnad, unmap_q, q_depth, + tcb->producer_index); + dev_kfree_skb_any(skb); + BNAD_UPDATE_CTR(bnad, tx_skb_map_failed); + return NETDEV_TX_OK; + } + dma_unmap_len_set(&unmap->vectors[vect_id], dma_len, size); BNA_SET_DMA_ADDR(dma_addr, &txqent->vector[vect_id].host_addr); txqent->vector[vect_id].length = htons(size); diff --git a/drivers/net/ethernet/brocade/bna/bnad.h b/drivers/net/ethernet/brocade/bna/bnad.h index faedbf24777e..f4ed816b93ee 100644 --- a/drivers/net/ethernet/brocade/bna/bnad.h +++ b/drivers/net/ethernet/brocade/bna/bnad.h @@ -175,6 +175,7 @@ struct bnad_drv_stats { u64 tx_skb_headlen_zero; u64 tx_skb_frag_zero; u64 tx_skb_len_mismatch; + u64 tx_skb_map_failed; u64 hw_stats_updates; u64 netif_rx_dropped; @@ -189,6 +190,7 @@ struct bnad_drv_stats { u64 rx_unmap_q_alloc_failed; u64 rxbuf_alloc_failed; + u64 rxbuf_map_failed; }; /* Complete driver stats */ diff --git a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c index 2bdfc5dff4b1..0e4fdc3dd729 100644 --- a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c +++ b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c @@ -90,6 +90,7 @@ static const char *bnad_net_stats_strings[BNAD_ETHTOOL_STATS_NUM] = { "tx_skb_headlen_zero", "tx_skb_frag_zero", "tx_skb_len_mismatch", + "tx_skb_map_failed", "hw_stats_updates", "netif_rx_dropped", @@ -102,6 +103,7 @@ static const char *bnad_net_stats_strings[BNAD_ETHTOOL_STATS_NUM] = { "tx_unmap_q_alloc_failed", "rx_unmap_q_alloc_failed", "rxbuf_alloc_failed", + "rxbuf_map_failed", "mac_stats_clr_cnt", "mac_frame_64", @@ -807,6 +809,7 @@ bnad_per_q_stats_fill(struct bnad *bnad, u64 *buf, int bi) rx_packets_with_error; buf[bi++] = rcb->rxq-> rxbuf_alloc_failed; + buf[bi++] = rcb->rxq->rxbuf_map_failed; buf[bi++] = rcb->producer_index; buf[bi++] = rcb->consumer_index; } @@ -821,6 +824,7 @@ bnad_per_q_stats_fill(struct bnad *bnad, u64 *buf, int bi) rx_packets_with_error; buf[bi++] = rcb->rxq-> rxbuf_alloc_failed; + buf[bi++] = rcb->rxq->rxbuf_map_failed; buf[bi++] = rcb->producer_index; buf[bi++] = rcb->consumer_index; } -- cgit v1.2.3 From fc27bd115b334e3ebdc682a42a47c3aea2566dcc Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 18 Sep 2015 00:19:08 +0100 Subject: 8139cp: Use dev_kfree_skb_any() instead of dev_kfree_skb() in cp_clean_rings() This can be called from cp_tx_timeout() with interrupts disabled. Spotted by Francois Romieu Signed-off-by: David Woodhouse Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139cp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index d79e33b3c191..52a533445f30 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -1151,7 +1151,7 @@ static void cp_clean_rings (struct cp_private *cp) desc = cp->rx_ring + i; dma_unmap_single(&cp->pdev->dev,le64_to_cpu(desc->addr), cp->rx_buf_sz, PCI_DMA_FROMDEVICE); - dev_kfree_skb(cp->rx_skb[i]); + dev_kfree_skb_any(cp->rx_skb[i]); } } @@ -1164,7 +1164,7 @@ static void cp_clean_rings (struct cp_private *cp) le32_to_cpu(desc->opts1) & 0xffff, PCI_DMA_TODEVICE); if (le32_to_cpu(desc->opts1) & LastFrag) - dev_kfree_skb(skb); + dev_kfree_skb_any(skb); cp->dev->stats.tx_dropped++; } } -- cgit v1.2.3 From 7a8a8e75d505147358b225173e890ada43a267e2 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 18 Sep 2015 00:21:54 +0100 Subject: 8139cp: Call __cp_set_rx_mode() from cp_tx_timeout() Unless we reset the RX config, on real hardware I don't seem to receive any packets after a TX timeout. Signed-off-by: David Woodhouse Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139cp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index 52a533445f30..ba3dab721806 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -1261,6 +1261,7 @@ static void cp_tx_timeout(struct net_device *dev) cp_clean_rings(cp); rc = cp_init_rings(cp); cp_start_hw(cp); + __cp_set_rx_mode(dev); cp_enable_irq(cp); netif_wake_queue(dev); -- cgit v1.2.3 From aab0c0e62ec4af224d1b6b40fca65055d403400b Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Fri, 18 Sep 2015 15:42:30 +0800 Subject: Revert "net/phy: Add Vitesse 8641 phy ID" This reverts commit 1298267b548a78840bd4b3e030993ff8747ca5e6. That commit claim that the Vitesse VSC8641 is compatible with Vitesse 82xx. But this is not true. It seems that all the registers used in Vitesse phy driver are not compatible between 8641 and 82xx. It does cause malfunction of the Ethernet on p1010rdb-pa board. So we definitely need a rework in order to support the 8641 phy in this driver. Signed-off-by: Kevin Hao Signed-off-by: David S. Miller --- drivers/net/phy/vitesse.c | 14 -------------- 1 file changed, 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 17cad185169d..76cad712ddb2 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -66,7 +66,6 @@ #define PHY_ID_VSC8244 0x000fc6c0 #define PHY_ID_VSC8514 0x00070670 #define PHY_ID_VSC8574 0x000704a0 -#define PHY_ID_VSC8641 0x00070431 #define PHY_ID_VSC8662 0x00070660 #define PHY_ID_VSC8221 0x000fc550 #define PHY_ID_VSC8211 0x000fc4b0 @@ -272,18 +271,6 @@ static struct phy_driver vsc82xx_driver[] = { .ack_interrupt = &vsc824x_ack_interrupt, .config_intr = &vsc82xx_config_intr, .driver = { .owner = THIS_MODULE,}, -}, { - .phy_id = PHY_ID_VSC8641, - .name = "Vitesse VSC8641", - .phy_id_mask = 0x000ffff0, - .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, - .config_init = &vsc824x_config_init, - .config_aneg = &vsc82x4_config_aneg, - .read_status = &genphy_read_status, - .ack_interrupt = &vsc824x_ack_interrupt, - .config_intr = &vsc82xx_config_intr, - .driver = { .owner = THIS_MODULE,}, }, { .phy_id = PHY_ID_VSC8662, .name = "Vitesse VSC8662", @@ -331,7 +318,6 @@ static struct mdio_device_id __maybe_unused vitesse_tbl[] = { { PHY_ID_VSC8244, 0x000fffc0 }, { PHY_ID_VSC8514, 0x000ffff0 }, { PHY_ID_VSC8574, 0x000ffff0 }, - { PHY_ID_VSC8641, 0x000ffff0 }, { PHY_ID_VSC8662, 0x000ffff0 }, { PHY_ID_VSC8221, 0x000ffff0 }, { PHY_ID_VSC8211, 0x000ffff0 }, -- cgit v1.2.3 From 3ea79249e81e5ed051f2e6480cbde896d99046e8 Mon Sep 17 00:00:00 2001 From: Michael S. Tsirkin Date: Fri, 18 Sep 2015 13:41:09 +0300 Subject: macvtap: fix TUNSETSNDBUF values > 64k Upon TUNSETSNDBUF, macvtap reads the requested sndbuf size into a local variable u. commit 39ec7de7092b ("macvtap: fix uninitialized access on TUNSETIFF") changed its type to u16 (which is the right thing to do for all other macvtap ioctls), breaking all values > 64k. The value of TUNSETSNDBUF is actually a signed 32 bit integer, so the right thing to do is to read it into an int. Cc: David S. Miller Fixes: 39ec7de7092b ("macvtap: fix uninitialized access on TUNSETIFF") Reported-by: Mark A. Peloquin Bisected-by: Matthew Rosato Reported-by: Christian Borntraeger Signed-off-by: Michael S. Tsirkin Tested-by: Matthew Rosato Acked-by: Christian Borntraeger Signed-off-by: David S. Miller --- drivers/net/macvtap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index edd77342773a..248478c6f6e4 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -1111,10 +1111,10 @@ static long macvtap_ioctl(struct file *file, unsigned int cmd, return 0; case TUNSETSNDBUF: - if (get_user(u, up)) + if (get_user(s, sp)) return -EFAULT; - q->sk.sk_sndbuf = u; + q->sk.sk_sndbuf = s; return 0; case TUNGETVNETHDRSZ: -- cgit v1.2.3 From c7d778fa74a88e7b5a09ba498d66bd67a7dc7df0 Mon Sep 17 00:00:00 2001 From: Luis de Bethencourt Date: Fri, 18 Sep 2015 17:54:00 +0200 Subject: net: arc: Fix module autoload for OF platform driver This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt Signed-off-by: David S. Miller --- drivers/net/ethernet/arc/emac_arc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/arc/emac_arc.c b/drivers/net/ethernet/arc/emac_arc.c index f9cb99bfb511..ffd180570920 100644 --- a/drivers/net/ethernet/arc/emac_arc.c +++ b/drivers/net/ethernet/arc/emac_arc.c @@ -78,6 +78,7 @@ static const struct of_device_id emac_arc_dt_ids[] = { { .compatible = "snps,arc-emac" }, { /* Sentinel */ } }; +MODULE_DEVICE_TABLE(of, emac_arc_dt_ids); static struct platform_driver emac_arc_driver = { .probe = emac_arc_probe, -- cgit v1.2.3 From 46d5a3431f2dbb2392b501be9b9f9c2ca17737d8 Mon Sep 17 00:00:00 2001 From: Luis de Bethencourt Date: Fri, 18 Sep 2015 17:54:30 +0200 Subject: net: systemport: Fix module autoload for OF platform driver This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bcmsysport.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c index b9a5a97ed4dd..f1b5364f3521 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -2079,6 +2079,7 @@ static const struct of_device_id bcm_sysport_of_match[] = { { .compatible = "brcm,systemport" }, { /* sentinel */ } }; +MODULE_DEVICE_TABLE(of, bcm_sysport_of_match); static struct platform_driver bcm_sysport_driver = { .probe = bcm_sysport_probe, -- cgit v1.2.3 From e8048e5595bedb1f4b20597d059d6877a710f12d Mon Sep 17 00:00:00 2001 From: Luis de Bethencourt Date: Fri, 18 Sep 2015 17:55:02 +0200 Subject: net: bcmgenet: Fix module autoload for OF platform driver This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index fadbd0088d3e..3bc701e4c59e 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -3155,6 +3155,7 @@ static const struct of_device_id bcmgenet_match[] = { { .compatible = "brcm,genet-v4", .data = (void *)GENET_V4 }, { }, }; +MODULE_DEVICE_TABLE(of, bcmgenet_match); static int bcmgenet_probe(struct platform_device *pdev) { -- cgit v1.2.3 From 23860063706f2037008fb423820cdbd0dcd558bb Mon Sep 17 00:00:00 2001 From: Luis de Bethencourt Date: Fri, 18 Sep 2015 17:55:27 +0200 Subject: net: gianfar_ptp: Fix module autoload for OF platform driver This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt Acked-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar_ptp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c index 8e3cd77aa347..664d0c261269 100644 --- a/drivers/net/ethernet/freescale/gianfar_ptp.c +++ b/drivers/net/ethernet/freescale/gianfar_ptp.c @@ -557,6 +557,7 @@ static const struct of_device_id match_table[] = { { .compatible = "fsl,etsec-ptp" }, {}, }; +MODULE_DEVICE_TABLE(of, match_table); static struct platform_driver gianfar_ptp_driver = { .driver = { -- cgit v1.2.3 From ebd8ebf078879973d0e8d2642253c091c23bd7d2 Mon Sep 17 00:00:00 2001 From: Luis de Bethencourt Date: Fri, 18 Sep 2015 17:56:21 +0200 Subject: net: moxa: Fix module autoload for OF platform driver This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt Signed-off-by: David S. Miller --- drivers/net/ethernet/moxa/moxart_ether.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/moxa/moxart_ether.c b/drivers/net/ethernet/moxa/moxart_ether.c index becbb5f1f5a7..a10c928bbd6b 100644 --- a/drivers/net/ethernet/moxa/moxart_ether.c +++ b/drivers/net/ethernet/moxa/moxart_ether.c @@ -552,6 +552,7 @@ static const struct of_device_id moxart_mac_match[] = { { .compatible = "moxa,moxart-mac" }, { } }; +MODULE_DEVICE_TABLE(of, moxart_mac_match); static struct platform_driver moxart_mac_driver = { .probe = moxart_mac_probe, -- cgit v1.2.3 From 2f90a3070690ad80c38d650e91b96b5dcbdfe2fd Mon Sep 17 00:00:00 2001 From: Luis de Bethencourt Date: Fri, 18 Sep 2015 18:16:12 +0200 Subject: net: phy: mdio-bcm-unimac: Fix module autoload for OF platform driver This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/mdio-bcm-unimac.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/phy/mdio-bcm-unimac.c b/drivers/net/phy/mdio-bcm-unimac.c index 6a52a7f0fa0d..4bde5e728fe0 100644 --- a/drivers/net/phy/mdio-bcm-unimac.c +++ b/drivers/net/phy/mdio-bcm-unimac.c @@ -244,6 +244,7 @@ static const struct of_device_id unimac_mdio_ids[] = { { .compatible = "brcm,unimac-mdio", }, { /* sentinel */ }, }; +MODULE_DEVICE_TABLE(of, unimac_mdio_ids); static struct platform_driver unimac_mdio_driver = { .driver = { -- cgit v1.2.3 From 1ccb141e31d0dc4c1234b0886cdc8b4399112c59 Mon Sep 17 00:00:00 2001 From: Luis de Bethencourt Date: Fri, 18 Sep 2015 18:16:29 +0200 Subject: net: phy: mdio-gpio: Fix module autoload for OF platform driver This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt Signed-off-by: David S. Miller --- drivers/net/phy/mdio-gpio.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index 7dc21e56a7aa..3bc9f03349f3 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -261,6 +261,7 @@ static const struct of_device_id mdio_gpio_of_match[] = { { .compatible = "virtual,mdio-gpio", }, { /* sentinel */ } }; +MODULE_DEVICE_TABLE(of, mdio_gpio_of_match); static struct platform_driver mdio_gpio_driver = { .probe = mdio_gpio_probe, -- cgit v1.2.3 From 4a476bd6d1d923922ec950ddc4c27b279f6901eb Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Sun, 20 Sep 2015 02:25:38 -0700 Subject: usbnet: New driver for QinHeng CH9200 devices There's a bunch of cheap USB 10/100 devices based on QinHeng chipsets. The vendor driver supports the CH9100 and CH9200 devices, but the majority of the code is of the if (ch9100) {} else {} form, with the most significant difference being that CH9200 provides a real MII interface but CH9100 fakes one with a bunch of global variables and magic commands. I don't have a CH9100, so it's probably better if someone who does provides an independent driver for it. In any case, this is a lightly cleaned up version of the vendor driver with all the CH9100 code dropped. Signed-off-by: Matthew Garrett Signed-off-by: David S. Miller --- drivers/net/usb/Kconfig | 11 ++ drivers/net/usb/Makefile | 2 +- drivers/net/usb/ch9200.c | 443 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 455 insertions(+), 1 deletion(-) create mode 100644 drivers/net/usb/ch9200.c (limited to 'drivers') diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 1610b79ae386..fbb9325d1f6e 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -583,4 +583,15 @@ config USB_VL600 http://ubuntuforums.org/showpost.php?p=10589647&postcount=17 +config USB_NET_CH9200 + tristate "QingHeng CH9200 USB ethernet support" + depends on USB_USBNET + select MII + help + Choose this option if you have a USB ethernet adapter with a QinHeng + CH9200 chipset. + + To compile this driver as a module, choose M here: the + module will be called ch9200. + endif # USB_NET_DRIVERS diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index cf6a0e610a7f..b5f04068dbe4 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -38,4 +38,4 @@ obj-$(CONFIG_USB_NET_HUAWEI_CDC_NCM) += huawei_cdc_ncm.o obj-$(CONFIG_USB_VL600) += lg-vl600.o obj-$(CONFIG_USB_NET_QMI_WWAN) += qmi_wwan.o obj-$(CONFIG_USB_NET_CDC_MBIM) += cdc_mbim.o - +obj-$(CONFIG_USB_NET_CH9200) += ch9200.o diff --git a/drivers/net/usb/ch9200.c b/drivers/net/usb/ch9200.c new file mode 100644 index 000000000000..cabb670eb55c --- /dev/null +++ b/drivers/net/usb/ch9200.c @@ -0,0 +1,443 @@ +/* + * USB 10M/100M ethernet adapter + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define CH9200_VID 0x1A86 +#define CH9200_PID_E092 0xE092 + +#define CTRL_TIMEOUT_MS 1000 + +#define CONTROL_TIMEOUT_MS 1000 + +#define REQUEST_READ 0x0E +#define REQUEST_WRITE 0x0F + +/* Address space: + * 00-63 : MII + * 64-128: MAC + * + * Note: all accesses must be 16-bit + */ + +#define MAC_REG_CTRL 64 +#define MAC_REG_STATUS 66 +#define MAC_REG_INTERRUPT_MASK 68 +#define MAC_REG_PHY_COMMAND 70 +#define MAC_REG_PHY_DATA 72 +#define MAC_REG_STATION_L 74 +#define MAC_REG_STATION_M 76 +#define MAC_REG_STATION_H 78 +#define MAC_REG_HASH_L 80 +#define MAC_REG_HASH_M1 82 +#define MAC_REG_HASH_M2 84 +#define MAC_REG_HASH_H 86 +#define MAC_REG_THRESHOLD 88 +#define MAC_REG_FIFO_DEPTH 90 +#define MAC_REG_PAUSE 92 +#define MAC_REG_FLOW_CONTROL 94 + +/* Control register bits + * + * Note: bits 13 and 15 are reserved + */ +#define LOOPBACK (0x01 << 14) +#define BASE100X (0x01 << 12) +#define MBPS_10 (0x01 << 11) +#define DUPLEX_MODE (0x01 << 10) +#define PAUSE_FRAME (0x01 << 9) +#define PROMISCUOUS (0x01 << 8) +#define MULTICAST (0x01 << 7) +#define BROADCAST (0x01 << 6) +#define HASH (0x01 << 5) +#define APPEND_PAD (0x01 << 4) +#define APPEND_CRC (0x01 << 3) +#define TRANSMITTER_ACTION (0x01 << 2) +#define RECEIVER_ACTION (0x01 << 1) +#define DMA_ACTION (0x01 << 0) + +/* Status register bits + * + * Note: bits 7-15 are reserved + */ +#define ALIGNMENT (0x01 << 6) +#define FIFO_OVER_RUN (0x01 << 5) +#define FIFO_UNDER_RUN (0x01 << 4) +#define RX_ERROR (0x01 << 3) +#define RX_COMPLETE (0x01 << 2) +#define TX_ERROR (0x01 << 1) +#define TX_COMPLETE (0x01 << 0) + +/* FIFO depth register bits + * + * Note: bits 6 and 14 are reserved + */ + +#define ETH_TXBD (0x01 << 15) +#define ETN_TX_FIFO_DEPTH (0x01 << 8) +#define ETH_RXBD (0x01 << 7) +#define ETH_RX_FIFO_DEPTH (0x01 << 0) + +static int control_read(struct usbnet *dev, + unsigned char request, unsigned short value, + unsigned short index, void *data, unsigned short size, + int timeout) +{ + unsigned char *buf = NULL; + unsigned char request_type; + int err = 0; + + if (request == REQUEST_READ) + request_type = (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER); + else + request_type = (USB_DIR_IN | USB_TYPE_VENDOR | + USB_RECIP_DEVICE); + + netdev_dbg(dev->net, "Control_read() index=0x%02x size=%d\n", + index, size); + + buf = kmalloc(size, GFP_KERNEL); + if (!buf) { + err = -ENOMEM; + goto err_out; + } + + err = usb_control_msg(dev->udev, + usb_rcvctrlpipe(dev->udev, 0), + request, request_type, value, index, buf, size, + timeout); + if (err == size) + memcpy(data, buf, size); + else if (err >= 0) + err = -EINVAL; + kfree(buf); + + return err; + +err_out: + return err; +} + +static int control_write(struct usbnet *dev, unsigned char request, + unsigned short value, unsigned short index, + void *data, unsigned short size, int timeout) +{ + unsigned char *buf = NULL; + unsigned char request_type; + int err = 0; + + if (request == REQUEST_WRITE) + request_type = (USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_OTHER); + else + request_type = (USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_DEVICE); + + netdev_dbg(dev->net, "Control_write() index=0x%02x size=%d\n", + index, size); + + if (data) { + buf = kmalloc(size, GFP_KERNEL); + if (!buf) { + err = -ENOMEM; + goto err_out; + } + memcpy(buf, data, size); + } + + err = usb_control_msg(dev->udev, + usb_sndctrlpipe(dev->udev, 0), + request, request_type, value, index, buf, size, + timeout); + if (err >= 0 && err < size) + err = -EINVAL; + kfree(buf); + + return 0; + +err_out: + return err; +} + +static int ch9200_mdio_read(struct net_device *netdev, int phy_id, int loc) +{ + struct usbnet *dev = netdev_priv(netdev); + unsigned char buff[2]; + + netdev_dbg(netdev, "ch9200_mdio_read phy_id:%02x loc:%02x\n", + phy_id, loc); + + if (phy_id != 0) + return -ENODEV; + + control_read(dev, REQUEST_READ, 0, loc * 2, buff, 0x02, + CONTROL_TIMEOUT_MS); + + return (buff[0] | buff[1] << 8); +} + +static void ch9200_mdio_write(struct net_device *netdev, + int phy_id, int loc, int val) +{ + struct usbnet *dev = netdev_priv(netdev); + unsigned char buff[2]; + + netdev_dbg(netdev, "ch9200_mdio_write() phy_id=%02x loc:%02x\n", + phy_id, loc); + + if (phy_id != 0) + return; + + buff[0] = (unsigned char)val; + buff[1] = (unsigned char)(val >> 8); + + control_write(dev, REQUEST_WRITE, 0, loc * 2, buff, 0x02, + CONTROL_TIMEOUT_MS); +} + +static int ch9200_link_reset(struct usbnet *dev) +{ + struct ethtool_cmd ecmd; + + mii_check_media(&dev->mii, 1, 1); + mii_ethtool_gset(&dev->mii, &ecmd); + + netdev_dbg(dev->net, "link_reset() speed:%d duplex:%d\n", + ecmd.speed, ecmd.duplex); + + return 0; +} + +static void ch9200_status(struct usbnet *dev, struct urb *urb) +{ + int link; + unsigned char *buf; + + if (urb->actual_length < 16) + return; + + buf = urb->transfer_buffer; + link = !!(buf[0] & 0x01); + + if (link) { + netif_carrier_on(dev->net); + usbnet_defer_kevent(dev, EVENT_LINK_RESET); + } else { + netif_carrier_off(dev->net); + } +} + +static struct sk_buff *ch9200_tx_fixup(struct usbnet *dev, struct sk_buff *skb, + gfp_t flags) +{ + int i = 0; + int len = 0; + int tx_overhead = 0; + + tx_overhead = 0x40; + + len = skb->len; + if (skb_headroom(skb) < tx_overhead) { + struct sk_buff *skb2; + + skb2 = skb_copy_expand(skb, tx_overhead, 0, flags); + dev_kfree_skb_any(skb); + skb = skb2; + if (!skb) + return NULL; + } + + __skb_push(skb, tx_overhead); + /* usbnet adds padding if length is a multiple of packet size + * if so, adjust length value in header + */ + if ((skb->len % dev->maxpacket) == 0) + len++; + + skb->data[0] = len; + skb->data[1] = len >> 8; + skb->data[2] = 0x00; + skb->data[3] = 0x80; + + for (i = 4; i < 48; i++) + skb->data[i] = 0x00; + + skb->data[48] = len; + skb->data[49] = len >> 8; + skb->data[50] = 0x00; + skb->data[51] = 0x80; + + for (i = 52; i < 64; i++) + skb->data[i] = 0x00; + + return skb; +} + +static int ch9200_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + int len = 0; + int rx_overhead = 0; + + rx_overhead = 64; + + if (unlikely(skb->len < rx_overhead)) { + dev_err(&dev->udev->dev, "unexpected tiny rx frame\n"); + return 0; + } + + len = (skb->data[skb->len - 16] | skb->data[skb->len - 15] << 8); + skb_trim(skb, len); + + return 1; +} + +static int get_mac_address(struct usbnet *dev, unsigned char *data) +{ + int err = 0; + unsigned char mac_addr[0x06]; + int rd_mac_len = 0; + + netdev_dbg(dev->net, "get_mac_address:\n\tusbnet VID:%0x PID:%0x\n", + dev->udev->descriptor.idVendor, + dev->udev->descriptor.idProduct); + + memset(mac_addr, 0, sizeof(mac_addr)); + rd_mac_len = control_read(dev, REQUEST_READ, 0, + MAC_REG_STATION_L, mac_addr, 0x02, + CONTROL_TIMEOUT_MS); + rd_mac_len += control_read(dev, REQUEST_READ, 0, MAC_REG_STATION_M, + mac_addr + 2, 0x02, CONTROL_TIMEOUT_MS); + rd_mac_len += control_read(dev, REQUEST_READ, 0, MAC_REG_STATION_H, + mac_addr + 4, 0x02, CONTROL_TIMEOUT_MS); + if (rd_mac_len != ETH_ALEN) + err = -EINVAL; + + data[0] = mac_addr[5]; + data[1] = mac_addr[4]; + data[2] = mac_addr[3]; + data[3] = mac_addr[2]; + data[4] = mac_addr[1]; + data[5] = mac_addr[0]; + + return err; +} + +static int ch9200_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int retval = 0; + unsigned char data[2]; + + retval = usbnet_get_endpoints(dev, intf); + if (retval) + return retval; + + dev->mii.dev = dev->net; + dev->mii.mdio_read = ch9200_mdio_read; + dev->mii.mdio_write = ch9200_mdio_write; + dev->mii.reg_num_mask = 0x1f; + + dev->mii.phy_id_mask = 0x1f; + + dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; + dev->rx_urb_size = 24 * 64 + 16; + mii_nway_restart(&dev->mii); + + data[0] = 0x01; + data[1] = 0x0F; + retval = control_write(dev, REQUEST_WRITE, 0, MAC_REG_THRESHOLD, data, + 0x02, CONTROL_TIMEOUT_MS); + + data[0] = 0xA0; + data[1] = 0x90; + retval = control_write(dev, REQUEST_WRITE, 0, MAC_REG_FIFO_DEPTH, data, + 0x02, CONTROL_TIMEOUT_MS); + + data[0] = 0x30; + data[1] = 0x00; + retval = control_write(dev, REQUEST_WRITE, 0, MAC_REG_PAUSE, data, + 0x02, CONTROL_TIMEOUT_MS); + + data[0] = 0x17; + data[1] = 0xD8; + retval = control_write(dev, REQUEST_WRITE, 0, MAC_REG_FLOW_CONTROL, + data, 0x02, CONTROL_TIMEOUT_MS); + + /* Undocumented register */ + data[0] = 0x01; + data[1] = 0x00; + retval = control_write(dev, REQUEST_WRITE, 0, 254, data, 0x02, + CONTROL_TIMEOUT_MS); + + data[0] = 0x5F; + data[1] = 0x0D; + retval = control_write(dev, REQUEST_WRITE, 0, MAC_REG_CTRL, data, 0x02, + CONTROL_TIMEOUT_MS); + + retval = get_mac_address(dev, dev->net->dev_addr); + + return retval; +} + +static const struct driver_info ch9200_info = { + .description = "CH9200 USB to Network Adaptor", + .flags = FLAG_ETHER, + .bind = ch9200_bind, + .rx_fixup = ch9200_rx_fixup, + .tx_fixup = ch9200_tx_fixup, + .status = ch9200_status, + .link_reset = ch9200_link_reset, + .reset = ch9200_link_reset, +}; + +static const struct usb_device_id ch9200_products[] = { + { + USB_DEVICE(0x1A86, 0xE092), + .driver_info = (unsigned long)&ch9200_info, + }, + {}, +}; + +MODULE_DEVICE_TABLE(usb, ch9200_products); + +static struct usb_driver ch9200_driver = { + .name = "ch9200", + .id_table = ch9200_products, + .probe = usbnet_probe, + .disconnect = usbnet_disconnect, + .suspend = usbnet_suspend, + .resume = usbnet_resume, +}; + +static int __init ch9200_init(void) +{ + return usb_register(&ch9200_driver); +} + +static void __exit ch9200_exit(void) +{ + usb_deregister(&ch9200_driver); +} + +module_init(ch9200_init); +module_exit(ch9200_exit); + +MODULE_DESCRIPTION("QinHeng CH9200 USB Network device"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 5eb8f289ac3020a9abad1c3c532ceca83284b6ed Mon Sep 17 00:00:00 2001 From: John W. Linville Date: Fri, 18 Sep 2015 16:20:32 -0400 Subject: geneve: remove vlan-related feature assignment The code handling vlan tag insertion was dropped in commit 371bd1061d29 ("geneve: Consolidate Geneve functionality in single module."). Now we need to drop the related vlan feature bits in the netdev structure. Signed-off-by: John W. Linville Reviewed-by: Jesse Gross Signed-off-by: David S. Miller --- drivers/net/geneve.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index da3259ce7c8d..8f1e9150341a 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -748,12 +748,8 @@ static void geneve_setup(struct net_device *dev) dev->features |= NETIF_F_RXCSUM; dev->features |= NETIF_F_GSO_SOFTWARE; - dev->vlan_features = dev->features; - dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_STAG_TX; - dev->hw_features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_RXCSUM; dev->hw_features |= NETIF_F_GSO_SOFTWARE; - dev->hw_features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_STAG_TX; netif_keep_dst(dev); dev->priv_flags |= IFF_LIVE_ADDR_CHANGE | IFF_NO_QUEUE; -- cgit v1.2.3 From 4c5d283acc997a1bd7bc37cddcf7d284521cffff Mon Sep 17 00:00:00 2001 From: Sowmini Varadhan Date: Fri, 18 Sep 2015 17:47:55 -0400 Subject: sunvnet: Invoke SET_NETDEV_DEV() to set up the vdev in vnet_new() `ls /sys/devices/channel-devices/vnet-port-0-0/net' is missing without this change, and applications like NetworkManager are looking in sysfs for the information. Signed-off-by: Sowmini Varadhan Signed-off-by: David S. Miller --- drivers/net/ethernet/sun/sunvnet.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/sun/sunvnet.c b/drivers/net/ethernet/sun/sunvnet.c index 53fe200e0b79..cc106d892e29 100644 --- a/drivers/net/ethernet/sun/sunvnet.c +++ b/drivers/net/ethernet/sun/sunvnet.c @@ -1756,7 +1756,8 @@ static const struct net_device_ops vnet_ops = { #endif }; -static struct vnet *vnet_new(const u64 *local_mac) +static struct vnet *vnet_new(const u64 *local_mac, + struct vio_dev *vdev) { struct net_device *dev; struct vnet *vp; @@ -1790,6 +1791,8 @@ static struct vnet *vnet_new(const u64 *local_mac) NETIF_F_HW_CSUM | NETIF_F_SG; dev->features = dev->hw_features; + SET_NETDEV_DEV(dev, &vdev->dev); + err = register_netdev(dev); if (err) { pr_err("Cannot register net device, aborting\n"); @@ -1808,7 +1811,8 @@ err_out_free_dev: return ERR_PTR(err); } -static struct vnet *vnet_find_or_create(const u64 *local_mac) +static struct vnet *vnet_find_or_create(const u64 *local_mac, + struct vio_dev *vdev) { struct vnet *iter, *vp; @@ -1821,7 +1825,7 @@ static struct vnet *vnet_find_or_create(const u64 *local_mac) } } if (!vp) - vp = vnet_new(local_mac); + vp = vnet_new(local_mac, vdev); mutex_unlock(&vnet_list_mutex); return vp; @@ -1848,7 +1852,8 @@ static void vnet_cleanup(void) static const char *local_mac_prop = "local-mac-address"; static struct vnet *vnet_find_parent(struct mdesc_handle *hp, - u64 port_node) + u64 port_node, + struct vio_dev *vdev) { const u64 *local_mac = NULL; u64 a; @@ -1869,7 +1874,7 @@ static struct vnet *vnet_find_parent(struct mdesc_handle *hp, if (!local_mac) return ERR_PTR(-ENODEV); - return vnet_find_or_create(local_mac); + return vnet_find_or_create(local_mac, vdev); } static struct ldc_channel_config vnet_ldc_cfg = { @@ -1923,7 +1928,7 @@ static int vnet_port_probe(struct vio_dev *vdev, const struct vio_device_id *id) hp = mdesc_grab(); - vp = vnet_find_parent(hp, vdev->mp); + vp = vnet_find_parent(hp, vdev->mp, vdev); if (IS_ERR(vp)) { pr_err("Cannot find port parent vnet\n"); err = PTR_ERR(vp); -- cgit v1.2.3 From 08399efc631960c827cebcfe83ad7ed54ebc012b Mon Sep 17 00:00:00 2001 From: John W. Linville Date: Mon, 21 Sep 2015 10:29:09 -0400 Subject: geneve: ensure ECN info is handled properly in all tx/rx paths Partially due to a pre-exising "thinko", the new metadata-based tx/rx paths were handling ECN propagation differently than the traditional tx/rx paths. This patch removes the "thinko" (involving multiple ip_hdr assignments) on the rx path and corrects the ECN handling on both the rx and tx paths. Signed-off-by: John W. Linville Reviewed-by: Jesse Gross Signed-off-by: David S. Miller --- drivers/net/geneve.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 8f1e9150341a..4ce8b7b90c7c 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -126,6 +126,8 @@ static void geneve_rx(struct geneve_sock *gs, struct sk_buff *skb) __be32 addr; int err; + iph = ip_hdr(skb); /* outer IP header... */ + if (gs->collect_md) { static u8 zero_vni[3]; @@ -133,7 +135,6 @@ static void geneve_rx(struct geneve_sock *gs, struct sk_buff *skb) addr = 0; } else { vni = gnvh->vni; - iph = ip_hdr(skb); /* Still outer IP header... */ addr = iph->saddr; } @@ -178,7 +179,6 @@ static void geneve_rx(struct geneve_sock *gs, struct sk_buff *skb) skb_reset_network_header(skb); - iph = ip_hdr(skb); /* Now inner IP header... */ err = IP_ECN_decapsulate(iph, skb); if (unlikely(err)) { @@ -626,6 +626,7 @@ static netdev_tx_t geneve_xmit(struct sk_buff *skb, struct net_device *dev) struct geneve_sock *gs = geneve->sock; struct ip_tunnel_info *info = NULL; struct rtable *rt = NULL; + const struct iphdr *iip; /* interior IP header */ struct flowi4 fl4; __u8 tos, ttl; __be16 sport; @@ -653,6 +654,8 @@ static netdev_tx_t geneve_xmit(struct sk_buff *skb, struct net_device *dev) sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true); skb_reset_mac_header(skb); + iip = ip_hdr(skb); + if (info) { const struct ip_tunnel_key *key = &info->key; u8 *opts = NULL; @@ -668,19 +671,16 @@ static netdev_tx_t geneve_xmit(struct sk_buff *skb, struct net_device *dev) if (unlikely(err)) goto err; - tos = key->tos; + tos = ip_tunnel_ecn_encap(key->tos, iip, skb); ttl = key->ttl; df = key->tun_flags & TUNNEL_DONT_FRAGMENT ? htons(IP_DF) : 0; } else { - const struct iphdr *iip; /* interior IP header */ - udp_csum = false; err = geneve_build_skb(rt, skb, 0, geneve->vni, 0, NULL, udp_csum); if (unlikely(err)) goto err; - iip = ip_hdr(skb); tos = ip_tunnel_ecn_encap(fl4.flowi4_tos, iip, skb); ttl = geneve->ttl; if (!ttl && IN_MULTICAST(ntohl(fl4.daddr))) -- cgit v1.2.3 From 53adc9e83028d9e35b6408231ebaf62a94a16e4d Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 21 Sep 2015 21:42:59 +0100 Subject: net: dsa: actually force the speed on the CPU port Commit 54d792f257c6 ("net: dsa: Centralise global and port setup code into mv88e6xxx.") merged in the 4.2 merge window broke the link speed forcing for the CPU port of Marvell DSA switches. The original code was: /* MAC Forcing register: don't force link, speed, duplex * or flow control state to any particular values on physical * ports, but force the CPU port and all DSA ports to 1000 Mb/s * full duplex. */ if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p)) REG_WRITE(addr, 0x01, 0x003e); else REG_WRITE(addr, 0x01, 0x0003); but the new code does a read-modify-write: reg = _mv88e6xxx_reg_read(ds, REG_PORT(port), PORT_PCS_CTRL); if (dsa_is_cpu_port(ds, port) || ds->dsa_port_mask & (1 << port)) { reg |= PORT_PCS_CTRL_FORCE_LINK | PORT_PCS_CTRL_LINK_UP | PORT_PCS_CTRL_DUPLEX_FULL | PORT_PCS_CTRL_FORCE_DUPLEX; if (mv88e6xxx_6065_family(ds)) reg |= PORT_PCS_CTRL_100; else reg |= PORT_PCS_CTRL_1000; The link speed in the PCS control register is a two bit field. Forcing the link speed in this way doesn't ensure that the bit field is set to the correct value - on the hardware I have here, the speed bitfield remains set to 0x03, resulting in the speed not being forced to gigabit. We must clear both bits before forcing the link speed. Fixes: 54d792f257c6 ("net: dsa: Centralise global and port setup code into mv88e6xxx.") Signed-off-by: Russell King Acked-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c index 6f13f7206762..f8baa897d1a0 100644 --- a/drivers/net/dsa/mv88e6xxx.c +++ b/drivers/net/dsa/mv88e6xxx.c @@ -2000,6 +2000,7 @@ static int mv88e6xxx_setup_port(struct dsa_switch *ds, int port) */ reg = _mv88e6xxx_reg_read(ds, REG_PORT(port), PORT_PCS_CTRL); if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port)) { + reg &= ~PORT_PCS_CTRL_UNFORCED; reg |= PORT_PCS_CTRL_FORCE_LINK | PORT_PCS_CTRL_LINK_UP | PORT_PCS_CTRL_DUPLEX_FULL | -- cgit v1.2.3 From 23eedbc2435ddd226717603c4f3c8efec7bdbb4d Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Tue, 22 Sep 2015 09:29:49 +0200 Subject: ch9200: Convert to use module_usb_driver Converts the ch9200 driver to use the module_usb_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Tobias Klauser Acked-by: Matthew Garrett Signed-off-by: David S. Miller --- drivers/net/usb/ch9200.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/ch9200.c b/drivers/net/usb/ch9200.c index cabb670eb55c..5e151e6a3e09 100644 --- a/drivers/net/usb/ch9200.c +++ b/drivers/net/usb/ch9200.c @@ -426,18 +426,7 @@ static struct usb_driver ch9200_driver = { .resume = usbnet_resume, }; -static int __init ch9200_init(void) -{ - return usb_register(&ch9200_driver); -} - -static void __exit ch9200_exit(void) -{ - usb_deregister(&ch9200_driver); -} - -module_init(ch9200_init); -module_exit(ch9200_exit); +module_usb_driver(ch9200_driver); MODULE_DESCRIPTION("QinHeng CH9200 USB Network device"); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 8c85151ddec66f78fbf997e35be005a322fbb9c9 Mon Sep 17 00:00:00 2001 From: WingMan Kwok Date: Wed, 23 Sep 2015 13:37:05 -0400 Subject: net: netcp: ethss: fix error in calling sgmii api with incorrect offset On K2HK, sgmii module registers of slave 0 and 1 are mem mapped to one contiguous block, while those of slave 2 and 3 are mapped to another contiguous block. However, on K2E and K2L, sgmii module registers of all slaves are mem mapped to one contiguous block. SGMII APIs expect slave 0 sgmii base when API is invoked for slave 0 and 1, and slave 2 sgmii base when invoked for other slaves. Before this patch, slave 0 sgmii base is always passed to sgmii API for K2E regardless which slave is the API invoked for. This patch fixes the problem. Signed-off-by: WingMan Kwok Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/netcp_ethss.c | 47 +++++++++++++++-------------------- 1 file changed, 20 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/netcp_ethss.c b/drivers/net/ethernet/ti/netcp_ethss.c index 6f16d6aaf7b7..6bff8d82ceab 100644 --- a/drivers/net/ethernet/ti/netcp_ethss.c +++ b/drivers/net/ethernet/ti/netcp_ethss.c @@ -77,6 +77,7 @@ #define GBENU_ALE_OFFSET 0x1e000 #define GBENU_HOST_PORT_NUM 0 #define GBENU_NUM_ALE_ENTRIES 1024 +#define GBENU_SGMII_MODULE_SIZE 0x100 /* 10G Ethernet SS defines */ #define XGBE_MODULE_NAME "netcp-xgbe" @@ -149,8 +150,8 @@ #define XGBE_STATS2_MODULE 2 /* s: 0-based slave_port */ -#define SGMII_BASE(s) \ - (((s) < 2) ? gbe_dev->sgmii_port_regs : gbe_dev->sgmii_port34_regs) +#define SGMII_BASE(d, s) \ + (((s) < 2) ? (d)->sgmii_port_regs : (d)->sgmii_port34_regs) #define GBE_TX_QUEUE 648 #define GBE_TXHOOK_ORDER 0 @@ -1997,13 +1998,8 @@ static void netcp_ethss_update_link_state(struct gbe_priv *gbe_dev, return; if (!SLAVE_LINK_IS_XGMII(slave)) { - if (gbe_dev->ss_version == GBE_SS_VERSION_14) - sgmii_link_state = - netcp_sgmii_get_port_link(SGMII_BASE(sp), sp); - else - sgmii_link_state = - netcp_sgmii_get_port_link( - gbe_dev->sgmii_port_regs, sp); + sgmii_link_state = + netcp_sgmii_get_port_link(SGMII_BASE(gbe_dev, sp), sp); } phy_link_state = gbe_phy_link_status(slave); @@ -2100,17 +2096,11 @@ static void gbe_port_config(struct gbe_priv *gbe_dev, struct gbe_slave *slave, static void gbe_sgmii_rtreset(struct gbe_priv *priv, struct gbe_slave *slave, bool set) { - void __iomem *sgmii_port_regs; - if (SLAVE_LINK_IS_XGMII(slave)) return; - if ((priv->ss_version == GBE_SS_VERSION_14) && (slave->slave_num >= 2)) - sgmii_port_regs = priv->sgmii_port34_regs; - else - sgmii_port_regs = priv->sgmii_port_regs; - - netcp_sgmii_rtreset(sgmii_port_regs, slave->slave_num, set); + netcp_sgmii_rtreset(SGMII_BASE(priv, slave->slave_num), + slave->slave_num, set); } static void gbe_slave_stop(struct gbe_intf *intf) @@ -2136,17 +2126,12 @@ static void gbe_slave_stop(struct gbe_intf *intf) static void gbe_sgmii_config(struct gbe_priv *priv, struct gbe_slave *slave) { - void __iomem *sgmii_port_regs; - - sgmii_port_regs = priv->sgmii_port_regs; - if ((priv->ss_version == GBE_SS_VERSION_14) && (slave->slave_num >= 2)) - sgmii_port_regs = priv->sgmii_port34_regs; + if (SLAVE_LINK_IS_XGMII(slave)) + return; - if (!SLAVE_LINK_IS_XGMII(slave)) { - netcp_sgmii_reset(sgmii_port_regs, slave->slave_num); - netcp_sgmii_config(sgmii_port_regs, slave->slave_num, - slave->link_interface); - } + netcp_sgmii_reset(SGMII_BASE(priv, slave->slave_num), slave->slave_num); + netcp_sgmii_config(SGMII_BASE(priv, slave->slave_num), slave->slave_num, + slave->link_interface); } static int gbe_slave_open(struct gbe_intf *gbe_intf) @@ -2997,6 +2982,14 @@ static int set_gbenu_ethss_priv(struct gbe_priv *gbe_dev, gbe_dev->switch_regs = regs; gbe_dev->sgmii_port_regs = gbe_dev->ss_regs + GBENU_SGMII_MODULE_OFFSET; + + /* Although sgmii modules are mem mapped to one contiguous + * region on GBENU devices, setting sgmii_port34_regs allows + * consistent code when accessing sgmii api + */ + gbe_dev->sgmii_port34_regs = gbe_dev->sgmii_port_regs + + (2 * GBENU_SGMII_MODULE_SIZE); + gbe_dev->host_port_regs = gbe_dev->switch_regs + GBENU_HOST_PORT_OFFSET; for (i = 0; i < (gbe_dev->max_num_ports); i++) -- cgit v1.2.3 From 156e3c21f89655f099228577005a6c656b3ceb3d Mon Sep 17 00:00:00 2001 From: Karicheri, Muralidharan Date: Wed, 23 Sep 2015 13:37:06 -0400 Subject: net: netcp: remove dead code from the driver netcp_core is the first driver that will get initialized and the modules (ethss, pa etc) will then get initialized. So the code at the end of netcp_probe() that iterate over the modules is a dead code as the module list will be always be empty. So remove this code. Signed-off-by: Murali Karicheri Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/netcp_core.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c index 1a5aca55ea9f..c0bc4b9658fe 100644 --- a/drivers/net/ethernet/ti/netcp_core.c +++ b/drivers/net/ethernet/ti/netcp_core.c @@ -2040,7 +2040,6 @@ static int netcp_probe(struct platform_device *pdev) struct device_node *child, *interfaces; struct netcp_device *netcp_device; struct device *dev = &pdev->dev; - struct netcp_module *module; int ret; if (!node) { @@ -2087,14 +2086,6 @@ static int netcp_probe(struct platform_device *pdev) /* Add the device instance to the list */ list_add_tail(&netcp_device->device_list, &netcp_devices); - /* Probe & attach any modules already registered */ - mutex_lock(&netcp_modules_lock); - for_each_netcp_module(module) { - ret = netcp_module_probe(netcp_device, module); - if (ret < 0) - dev_err(dev, "module(%s) probe failed\n", module->name); - } - mutex_unlock(&netcp_modules_lock); return 0; probe_quit_interface: -- cgit v1.2.3 From 736532a0705ffc27c14f712fa2758a7f8b15e8b4 Mon Sep 17 00:00:00 2001 From: Karicheri, Muralidharan Date: Wed, 23 Sep 2015 13:37:07 -0400 Subject: net: netcp: move netcp_register_interface() to after attach module The netcp interface is not fully initialized before attach the module to the interface. For example, the tx pipe/rx pipe is initialized in ethss module as part of attach(). So until this is complete, the interface can't be registered. So move registration of interface to net device outside the current loop that attaches the modules to the interface. Signed-off-by: Murali Karicheri Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/netcp_core.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c index c0bc4b9658fe..cf693dec2e44 100644 --- a/drivers/net/ethernet/ti/netcp_core.c +++ b/drivers/net/ethernet/ti/netcp_core.c @@ -291,13 +291,6 @@ static int netcp_module_probe(struct netcp_device *netcp_device, interface_list) { struct netcp_intf_modpriv *intf_modpriv; - /* If interface not registered then register now */ - if (!netcp_intf->netdev_registered) - ret = netcp_register_interface(netcp_intf); - - if (ret) - return -ENODEV; - intf_modpriv = devm_kzalloc(dev, sizeof(*intf_modpriv), GFP_KERNEL); if (!intf_modpriv) @@ -323,6 +316,18 @@ static int netcp_module_probe(struct netcp_device *netcp_device, continue; } } + + /* Now register the interface with netdev */ + list_for_each_entry(netcp_intf, + &netcp_device->interface_head, + interface_list) { + /* If interface not registered then register now */ + if (!netcp_intf->netdev_registered) { + ret = netcp_register_interface(netcp_intf); + if (ret) + return -ENODEV; + } + } return 0; } -- cgit v1.2.3 From e558b1fbf5f43da83f91a31e595a6d65e663b100 Mon Sep 17 00:00:00 2001 From: Karicheri, Muralidharan Date: Wed, 23 Sep 2015 13:37:08 -0400 Subject: net: netcp: add error check to netcp_allocate_rx_buf() Currently, if netcp_allocate_rx_buf() fails due no descriptors in the rx free descriptor queue, inside the netcp_rxpool_refill() function the iterative loop to fill buffers doesn't terminate right away. So modify the netcp_allocate_rx_buf() to return an error code and use it break the loop when there is error. Signed-off-by: Murali Karicheri Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/netcp_core.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c index cf693dec2e44..97e2629c10b9 100644 --- a/drivers/net/ethernet/ti/netcp_core.c +++ b/drivers/net/ethernet/ti/netcp_core.c @@ -801,7 +801,7 @@ static void netcp_rxpool_free(struct netcp_intf *netcp) netcp->rx_pool = NULL; } -static void netcp_allocate_rx_buf(struct netcp_intf *netcp, int fdq) +static int netcp_allocate_rx_buf(struct netcp_intf *netcp, int fdq) { struct knav_dma_desc *hwdesc; unsigned int buf_len, dma_sz; @@ -815,7 +815,7 @@ static void netcp_allocate_rx_buf(struct netcp_intf *netcp, int fdq) hwdesc = knav_pool_desc_get(netcp->rx_pool); if (IS_ERR_OR_NULL(hwdesc)) { dev_dbg(netcp->ndev_dev, "out of rx pool desc\n"); - return; + return -ENOMEM; } if (likely(fdq == 0)) { @@ -867,25 +867,26 @@ static void netcp_allocate_rx_buf(struct netcp_intf *netcp, int fdq) knav_pool_desc_map(netcp->rx_pool, hwdesc, sizeof(*hwdesc), &dma, &dma_sz); knav_queue_push(netcp->rx_fdq[fdq], dma, sizeof(*hwdesc), 0); - return; + return 0; fail: knav_pool_desc_put(netcp->rx_pool, hwdesc); + return -ENOMEM; } /* Refill Rx FDQ with descriptors & attached buffers */ static void netcp_rxpool_refill(struct netcp_intf *netcp) { u32 fdq_deficit[KNAV_DMA_FDQ_PER_CHAN] = {0}; - int i; + int i, ret = 0; /* Calculate the FDQ deficit and refill */ for (i = 0; i < KNAV_DMA_FDQ_PER_CHAN && netcp->rx_fdq[i]; i++) { fdq_deficit[i] = netcp->rx_queue_depths[i] - knav_queue_get_count(netcp->rx_fdq[i]); - while (fdq_deficit[i]--) - netcp_allocate_rx_buf(netcp, i); + while (fdq_deficit[i]-- && !ret) + ret = netcp_allocate_rx_buf(netcp, i); } /* end for fdqs */ } -- cgit v1.2.3 From 915c5857874fc211874de1363e88f902e581e6eb Mon Sep 17 00:00:00 2001 From: Karicheri, Muralidharan Date: Wed, 23 Sep 2015 13:37:09 -0400 Subject: net: netcp: check for interface handle in netcp_module_probe() Currently netcp_module_probe() doesn't check the return value of of_parse_phandle() that points to the interface data for the module and then pass the node ptr to the module which is incorrect. Check for return value and free the intf_modpriv if there is error. Signed-off-by: Murali Karicheri Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/netcp_core.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c index 97e2629c10b9..d39dce3b37a7 100644 --- a/drivers/net/ethernet/ti/netcp_core.c +++ b/drivers/net/ethernet/ti/netcp_core.c @@ -299,6 +299,11 @@ static int netcp_module_probe(struct netcp_device *netcp_device, interface = of_parse_phandle(netcp_intf->node_interface, module->name, 0); + if (!interface) { + devm_kfree(dev, intf_modpriv); + continue; + } + intf_modpriv->netcp_priv = netcp_intf; intf_modpriv->netcp_module = module; list_add_tail(&intf_modpriv->intf_list, -- cgit v1.2.3 From 99f8ef5dc6546ac28cc7a03ff8301bc72fe5527e Mon Sep 17 00:00:00 2001 From: Karicheri, Muralidharan Date: Wed, 23 Sep 2015 13:37:10 -0400 Subject: net: netcp: allocate buffers to desc before re-enable interrupt Currently netcp_rxpool_refill() that refill descriptors and attached buffers to fdq while interrupt is enabled as part of NAPI poll. Doing it while interrupt is disabled could be beneficial as hardware will not be starved when CPU is busy with processing interrupt. Signed-off-by: Murali Karicheri Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/netcp_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c index d39dce3b37a7..8026daaf940b 100644 --- a/drivers/net/ethernet/ti/netcp_core.c +++ b/drivers/net/ethernet/ti/netcp_core.c @@ -904,12 +904,12 @@ static int netcp_rx_poll(struct napi_struct *napi, int budget) packets = netcp_process_rx_packets(netcp, budget); + netcp_rxpool_refill(netcp); if (packets < budget) { napi_complete(&netcp->rx_napi); knav_queue_enable_notify(netcp->rx_queue); } - netcp_rxpool_refill(netcp); return packets; } -- cgit v1.2.3 From 8ceaf361ffd131e835aef1e6cdb1d5ba70702617 Mon Sep 17 00:00:00 2001 From: Karicheri, Muralidharan Date: Wed, 23 Sep 2015 13:37:11 -0400 Subject: net: netcp: fix deadlock reported by lockup detector A deadlock trace is seen in netcp driver with lockup detector enabled. The trace log is provided below for reference. This patch fixes the bug by removing the usage of netcp_modules_lock within ndo_ops functions. ndo_{open/close/ioctl)() is already called with rtnl_lock held. So there is no need to hold another mutex for serialization across processes on multiple cores. So remove use of netcp_modules_lock mutex from these ndo ops functions. ndo_set_rx_mode() shouldn't be using a mutex as it is called from atomic context. In the case of ndo_set_rx_mode(), there can be call to this API without rtnl_lock held from an atomic context. As the underlying modules are expected to add address to a hardware table, it is to be protected across concurrent updates and hence a spin lock is used to synchronize the access. Same with ndo_vlan_rx_add_vid() & ndo_vlan_rx_kill_vid(). Probably the netcp_modules_lock is used to protect the module not being removed as part of rmmod. Currently this is not fully implemented and assumes the interface is brought down before doing rmmod of modules. The support for rmmmod while interface is up is expected in a future patch set when additional modules such as pa, qos are added. For now all of the tests such as if up/down, reboot, iperf works fine with this patch applied. Deadlock trace seen with lockup detector enabled is shown below for reference. [ 16.863014] ====================================================== [ 16.869183] [ INFO: possible circular locking dependency detected ] [ 16.875441] 4.1.6-01265-gfb1e101 #1 Tainted: G W [ 16.881176] ------------------------------------------------------- [ 16.887432] ifconfig/1662 is trying to acquire lock: [ 16.892386] (netcp_modules_lock){+.+.+.}, at: [] netcp_ndo_open+0x168/0x518 [ 16.900321] [ 16.900321] but task is already holding lock: [ 16.906144] (rtnl_mutex){+.+.+.}, at: [] devinet_ioctl+0xf8/0x7e4 [ 16.913206] [ 16.913206] which lock already depends on the new lock. [ 16.913206] [ 16.921372] [ 16.921372] the existing dependency chain (in reverse order) is: [ 16.928844] -> #1 (rtnl_mutex){+.+.+.}: [ 16.932865] [] mutex_lock_nested+0x68/0x4a8 [ 16.938521] [] register_netdev+0xc/0x24 [ 16.943831] [] netcp_module_probe+0x214/0x2ec [ 16.949660] [] netcp_register_module+0xd4/0x140 [ 16.955663] [] keystone_gbe_init+0x10/0x28 [ 16.961233] [] do_one_initcall+0xb8/0x1f8 [ 16.966714] [] kernel_init_freeable+0x148/0x1e8 [ 16.972720] [] kernel_init+0xc/0xe8 [ 16.977682] [] ret_from_fork+0x14/0x3c [ 16.982905] -> #0 (netcp_modules_lock){+.+.+.}: [ 16.987619] [] lock_acquire+0x118/0x320 [ 16.992928] [] mutex_lock_nested+0x68/0x4a8 [ 16.998582] [] netcp_ndo_open+0x168/0x518 [ 17.004064] [] __dev_open+0xa8/0x10c [ 17.009112] [] __dev_change_flags+0x94/0x144 [ 17.014853] [] dev_change_flags+0x18/0x48 [ 17.020334] [] devinet_ioctl+0x6dc/0x7e4 [ 17.025729] [] sock_ioctl+0x1d0/0x2a8 [ 17.030865] [] do_vfs_ioctl+0x41c/0x688 [ 17.036173] [] SyS_ioctl+0x34/0x5c [ 17.041046] [] ret_fast_syscall+0x0/0x54 [ 17.046441] [ 17.046441] other info that might help us debug this: [ 17.046441] [ 17.054434] Possible unsafe locking scenario: [ 17.054434] [ 17.060343] CPU0 CPU1 [ 17.064862] ---- ---- [ 17.069381] lock(rtnl_mutex); [ 17.072522] lock(netcp_modules_lock); [ 17.078875] lock(rtnl_mutex); [ 17.084532] lock(netcp_modules_lock); [ 17.088366] [ 17.088366] *** DEADLOCK *** [ 17.088366] [ 17.094279] 1 lock held by ifconfig/1662: [ 17.098278] #0: (rtnl_mutex){+.+.+.}, at: [] devinet_ioctl+0xf8/0x7e4 [ 17.105774] [ 17.105774] stack backtrace: [ 17.110124] CPU: 1 PID: 1662 Comm: ifconfig Tainted: G W 4.1.6-01265-gfb1e101 #1 [ 17.118637] Hardware name: Keystone [ 17.122123] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 17.129862] [] (show_stack) from [] (dump_stack+0x84/0xc4) [ 17.137079] [] (dump_stack) from [] (print_circular_bug+0x210/0x330) [ 17.145161] [] (print_circular_bug) from [] (validate_chain.isra.35+0xf98/0x13ac) [ 17.154372] [] (validate_chain.isra.35) from [] (__lock_acquire+0x52c/0xcc0) [ 17.163149] [] (__lock_acquire) from [] (lock_acquire+0x118/0x320) [ 17.171058] [] (lock_acquire) from [] (mutex_lock_nested+0x68/0x4a8) [ 17.179140] [] (mutex_lock_nested) from [] (netcp_ndo_open+0x168/0x518) [ 17.187484] [] (netcp_ndo_open) from [] (__dev_open+0xa8/0x10c) [ 17.195133] [] (__dev_open) from [] (__dev_change_flags+0x94/0x144) [ 17.203129] [] (__dev_change_flags) from [] (dev_change_flags+0x18/0x48) [ 17.211560] [] (dev_change_flags) from [] (devinet_ioctl+0x6dc/0x7e4) [ 17.219729] [] (devinet_ioctl) from [] (sock_ioctl+0x1d0/0x2a8) [ 17.227378] [] (sock_ioctl) from [] (do_vfs_ioctl+0x41c/0x688) [ 17.234939] [] (do_vfs_ioctl) from [] (SyS_ioctl+0x34/0x5c) [ 17.242242] [] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x54) [ 17.258855] netcp-1.0 2620110.netcp eth0: Link is Up - 1Gbps/Full - flow control off [ 17.271282] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:616 [ 17.279712] in_atomic(): 1, irqs_disabled(): 0, pid: 1662, name: ifconfig [ 17.286500] INFO: lockdep is turned off. [ 17.290413] Preemption disabled at:[< (null)>] (null) [ 17.295728] [ 17.297214] CPU: 1 PID: 1662 Comm: ifconfig Tainted: G W 4.1.6-01265-gfb1e101 #1 [ 17.305735] Hardware name: Keystone [ 17.309223] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 17.316970] [] (show_stack) from [] (dump_stack+0x84/0xc4) [ 17.324194] [] (dump_stack) from [] (mutex_lock_nested+0x28/0x4a8) [ 17.332112] [] (mutex_lock_nested) from [] (netcp_set_rx_mode+0x160/0x210) [ 17.340724] [] (netcp_set_rx_mode) from [] (dev_set_rx_mode+0x1c/0x28) [ 17.348982] [] (dev_set_rx_mode) from [] (__dev_open+0xc4/0x10c) [ 17.356724] [] (__dev_open) from [] (__dev_change_flags+0x94/0x144) [ 17.364729] [] (__dev_change_flags) from [] (dev_change_flags+0x18/0x48) [ 17.373166] [] (dev_change_flags) from [] (devinet_ioctl+0x6dc/0x7e4) [ 17.381344] [] (devinet_ioctl) from [] (sock_ioctl+0x1d0/0x2a8) [ 17.388994] [] (sock_ioctl) from [] (do_vfs_ioctl+0x41c/0x688) [ 17.396563] [] (do_vfs_ioctl) from [] (SyS_ioctl+0x34/0x5c) [ 17.403873] [] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x54) [ 17.413772] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc (v1.20.2) started Sending discover... [ 18.690666] netcp-1.0 2620110.netcp eth0: Link is Up - 1Gbps/Full - flow control off Sending discover... [ 22.250972] netcp-1.0 2620110.netcp eth0: Link is Up - 1Gbps/Full - flow control off [ 22.258721] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 22.265458] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:616 [ 22.273896] in_atomic(): 1, irqs_disabled(): 0, pid: 342, name: kworker/1:1 [ 22.280854] INFO: lockdep is turned off. [ 22.284767] Preemption disabled at:[< (null)>] (null) [ 22.290074] [ 22.291568] CPU: 1 PID: 342 Comm: kworker/1:1 Tainted: G W 4.1.6-01265-gfb1e101 #1 [ 22.300255] Hardware name: Keystone [ 22.303750] Workqueue: ipv6_addrconf addrconf_dad_work [ 22.308895] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 22.316643] [] (show_stack) from [] (dump_stack+0x84/0xc4) [ 22.323867] [] (dump_stack) from [] (mutex_lock_nested+0x28/0x4a8) [ 22.331786] [] (mutex_lock_nested) from [] (netcp_set_rx_mode+0x160/0x210) [ 22.340394] [] (netcp_set_rx_mode) from [] (__dev_mc_add+0x54/0x68) [ 22.348401] [] (__dev_mc_add) from [] (igmp6_group_added+0x168/0x1b4) [ 22.356580] [] (igmp6_group_added) from [] (ipv6_dev_mc_inc+0x4f0/0x5a8) [ 22.365019] [] (ipv6_dev_mc_inc) from [] (addrconf_dad_work+0x21c/0x33c) [ 22.373460] [] (addrconf_dad_work) from [] (process_one_work+0x214/0x8d0) [ 22.381986] [] (process_one_work) from [] (worker_thread+0x48/0x4bc) [ 22.390071] [] (worker_thread) from [] (kthread+0xf0/0x108) [ 22.397381] [] (kthread) from [] Trace related to incorrect usage of mutex inside ndo_set_rx_mode [ 24.086066] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:616 [ 24.094506] in_atomic(): 1, irqs_disabled(): 0, pid: 1682, name: ifconfig [ 24.101291] INFO: lockdep is turned off. [ 24.105203] Preemption disabled at:[< (null)>] (null) [ 24.110511] [ 24.112005] CPU: 2 PID: 1682 Comm: ifconfig Tainted: G W 4.1.6-01265-gfb1e101 #1 [ 24.120518] Hardware name: Keystone [ 24.124018] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 24.131772] [] (show_stack) from [] (dump_stack+0x84/0xc4) [ 24.138989] [] (dump_stack) from [] (mutex_lock_nested+0x28/0x4a8) [ 24.146908] [] (mutex_lock_nested) from [] (netcp_set_rx_mode+0x160/0x210) [ 24.155523] [] (netcp_set_rx_mode) from [] (dev_set_rx_mode+0x1c/0x28) [ 24.163787] [] (dev_set_rx_mode) from [] (__dev_open+0xc4/0x10c) [ 24.171531] [] (__dev_open) from [] (__dev_change_flags+0x94/0x144) [ 24.179528] [] (__dev_change_flags) from [] (dev_change_flags+0x18/0x48) [ 24.187966] [] (dev_change_flags) from [] (devinet_ioctl+0x6dc/0x7e4) [ 24.196145] [] (devinet_ioctl) from [] (sock_ioctl+0x1d0/0x2a8) [ 24.203803] [] (sock_ioctl) from [] (do_vfs_ioctl+0x41c/0x688) [ 24.211373] [] (do_vfs_ioctl) from [] (SyS_ioctl+0x34/0x5c) [ 24.218676] [] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x54) [ 24.227156] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready Signed-off-by: Murali Karicheri Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/netcp_core.c | 26 ++++++++++---------------- 1 file changed, 10 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c index 8026daaf940b..9f9832f0dea9 100644 --- a/drivers/net/ethernet/ti/netcp_core.c +++ b/drivers/net/ethernet/ti/netcp_core.c @@ -367,7 +367,6 @@ int netcp_register_module(struct netcp_module *module) if (ret < 0) goto fail; } - mutex_unlock(&netcp_modules_lock); return 0; @@ -1395,7 +1394,6 @@ static void netcp_addr_sweep_del(struct netcp_intf *netcp) continue; dev_dbg(netcp->ndev_dev, "deleting address %pM, type %x\n", naddr->addr, naddr->type); - mutex_lock(&netcp_modules_lock); for_each_module(netcp, priv) { module = priv->netcp_module; if (!module->del_addr) @@ -1404,7 +1402,6 @@ static void netcp_addr_sweep_del(struct netcp_intf *netcp) naddr); WARN_ON(error); } - mutex_unlock(&netcp_modules_lock); netcp_addr_del(netcp, naddr); } } @@ -1421,7 +1418,7 @@ static void netcp_addr_sweep_add(struct netcp_intf *netcp) continue; dev_dbg(netcp->ndev_dev, "adding address %pM, type %x\n", naddr->addr, naddr->type); - mutex_lock(&netcp_modules_lock); + for_each_module(netcp, priv) { module = priv->netcp_module; if (!module->add_addr) @@ -1429,7 +1426,6 @@ static void netcp_addr_sweep_add(struct netcp_intf *netcp) error = module->add_addr(priv->module_priv, naddr); WARN_ON(error); } - mutex_unlock(&netcp_modules_lock); } } @@ -1443,6 +1439,7 @@ static void netcp_set_rx_mode(struct net_device *ndev) ndev->flags & IFF_ALLMULTI || netdev_mc_count(ndev) > NETCP_MAX_MCAST_ADDR); + spin_lock(&netcp->lock); /* first clear all marks */ netcp_addr_clear_mark(netcp); @@ -1461,6 +1458,7 @@ static void netcp_set_rx_mode(struct net_device *ndev) /* finally sweep and callout into modules */ netcp_addr_sweep_del(netcp); netcp_addr_sweep_add(netcp); + spin_unlock(&netcp->lock); } static void netcp_free_navigator_resources(struct netcp_intf *netcp) @@ -1625,7 +1623,6 @@ static int netcp_ndo_open(struct net_device *ndev) goto fail; } - mutex_lock(&netcp_modules_lock); for_each_module(netcp, intf_modpriv) { module = intf_modpriv->netcp_module; if (module->open) { @@ -1636,7 +1633,6 @@ static int netcp_ndo_open(struct net_device *ndev) } } } - mutex_unlock(&netcp_modules_lock); napi_enable(&netcp->rx_napi); napi_enable(&netcp->tx_napi); @@ -1653,7 +1649,6 @@ fail_open: if (module->close) module->close(intf_modpriv->module_priv, ndev); } - mutex_unlock(&netcp_modules_lock); fail: netcp_free_navigator_resources(netcp); @@ -1677,7 +1672,6 @@ static int netcp_ndo_stop(struct net_device *ndev) napi_disable(&netcp->rx_napi); napi_disable(&netcp->tx_napi); - mutex_lock(&netcp_modules_lock); for_each_module(netcp, intf_modpriv) { module = intf_modpriv->netcp_module; if (module->close) { @@ -1686,7 +1680,6 @@ static int netcp_ndo_stop(struct net_device *ndev) dev_err(netcp->ndev_dev, "Close failed\n"); } } - mutex_unlock(&netcp_modules_lock); /* Recycle Rx descriptors from completion queue */ netcp_empty_rx_queue(netcp); @@ -1714,7 +1707,6 @@ static int netcp_ndo_ioctl(struct net_device *ndev, if (!netif_running(ndev)) return -EINVAL; - mutex_lock(&netcp_modules_lock); for_each_module(netcp, intf_modpriv) { module = intf_modpriv->netcp_module; if (!module->ioctl) @@ -1730,7 +1722,6 @@ static int netcp_ndo_ioctl(struct net_device *ndev, } out: - mutex_unlock(&netcp_modules_lock); return (ret == 0) ? 0 : err; } @@ -1765,11 +1756,12 @@ static int netcp_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid) struct netcp_intf *netcp = netdev_priv(ndev); struct netcp_intf_modpriv *intf_modpriv; struct netcp_module *module; + unsigned long flags; int err = 0; dev_dbg(netcp->ndev_dev, "adding rx vlan id: %d\n", vid); - mutex_lock(&netcp_modules_lock); + spin_lock_irqsave(&netcp->lock, flags); for_each_module(netcp, intf_modpriv) { module = intf_modpriv->netcp_module; if ((module->add_vid) && (vid != 0)) { @@ -1781,7 +1773,8 @@ static int netcp_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid) } } } - mutex_unlock(&netcp_modules_lock); + spin_unlock_irqrestore(&netcp->lock, flags); + return err; } @@ -1790,11 +1783,12 @@ static int netcp_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vid) struct netcp_intf *netcp = netdev_priv(ndev); struct netcp_intf_modpriv *intf_modpriv; struct netcp_module *module; + unsigned long flags; int err = 0; dev_dbg(netcp->ndev_dev, "removing rx vlan id: %d\n", vid); - mutex_lock(&netcp_modules_lock); + spin_lock_irqsave(&netcp->lock, flags); for_each_module(netcp, intf_modpriv) { module = intf_modpriv->netcp_module; if (module->del_vid) { @@ -1806,7 +1800,7 @@ static int netcp_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vid) } } } - mutex_unlock(&netcp_modules_lock); + spin_unlock_irqrestore(&netcp->lock, flags); return err; } -- cgit v1.2.3 From aaa0062ecf4877a26dea66bee1039c6eaf906c94 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 23 Sep 2015 09:43:41 +0100 Subject: 8139cp: Do not re-enable RX interrupts in cp_tx_timeout() If an RX interrupt was already received but NAPI has not yet run when the RX timeout happens, we end up in cp_tx_timeout() with RX interrupts already disabled. Blindly re-enabling them will cause an IRQ storm. (This is made particularly horrid by the fact that cp_interrupt() always returns that it's handled the interrupt, even when it hasn't actually done anything. If it didn't do that, the core IRQ code would have detected the storm and handled it, I'd have had a clear smoking gun backtrace instead of just a spontaneously resetting router, and I'd have at *least* two days of my life back. Changing the return value of cp_interrupt() will be argued about under separate cover.) Unconditionally leave RX interrupts disabled after the reset, and schedule NAPI to check the receive ring and re-enable them. Signed-off-by: David Woodhouse Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139cp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index ba3dab721806..947932d4b79e 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -1262,9 +1262,10 @@ static void cp_tx_timeout(struct net_device *dev) rc = cp_init_rings(cp); cp_start_hw(cp); __cp_set_rx_mode(dev); - cp_enable_irq(cp); + cpw16_f(IntrMask, cp_norx_intr_mask); netif_wake_queue(dev); + napi_schedule_irqoff(&cp->napi); spin_unlock_irqrestore(&cp->lock, flags); } -- cgit v1.2.3 From 26b0bad6ac3a0167792dc4ffb276c29bc597d239 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 23 Sep 2015 09:44:06 +0100 Subject: 8139cp: Fix tx_queued debug message to print correct slot numbers After a certain amount of staring at the debug output of this driver, I realised it was lying to me. Signed-off-by: David Woodhouse Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139cp.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index 947932d4b79e..cbca0de1e857 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -786,7 +786,8 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb, wmb(); cp->tx_skb[entry] = skb; - entry = NEXT_TX(entry); + netif_dbg(cp, tx_queued, cp->dev, "tx queued, slot %d, skblen %d\n", + entry, skb->len); } else { struct cp_desc *txd; u32 first_len, first_eor; @@ -805,7 +806,6 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb, goto out_dma_error; cp->tx_skb[entry] = skb; - entry = NEXT_TX(entry); for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) { const skb_frag_t *this_frag = &skb_shinfo(skb)->frags[frag]; @@ -813,6 +813,8 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb, u32 ctrl; dma_addr_t mapping; + entry = NEXT_TX(entry); + len = skb_frag_size(this_frag); mapping = dma_map_single(&cp->pdev->dev, skb_frag_address(this_frag), @@ -848,9 +850,7 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb, txd->opts1 = cpu_to_le32(ctrl); wmb(); - cp->tx_skb[entry] = skb; - entry = NEXT_TX(entry); } txd = &cp->tx_ring[first_entry]; @@ -873,12 +873,13 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb, txd->opts1 = cpu_to_le32(first_eor | first_len | FirstFrag | DescOwn); wmb(); + + netif_dbg(cp, tx_queued, cp->dev, "tx queued, slots %d-%d, skblen %d\n", + first_entry, entry, skb->len); } - cp->tx_head = entry; + cp->tx_head = NEXT_TX(entry); netdev_sent_queue(dev, skb->len); - netif_dbg(cp, tx_queued, cp->dev, "tx queued, slot %d, skblen %d\n", - entry, skb->len); if (TX_BUFFS_AVAIL(cp) <= (MAX_SKB_FRAGS + 1)) netif_stop_queue(dev); -- cgit v1.2.3 From a3b804043f490aeec57d8ca5baccdd35e6250857 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 23 Sep 2015 09:44:38 +0100 Subject: 8139cp: Fix TSO/scatter-gather descriptor setup When sending a TSO frame in multiple buffers, we were neglecting to set the first descriptor up in TSO mode. Signed-off-by: David Woodhouse Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139cp.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index cbca0de1e857..75a8cee6b1d6 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -790,7 +790,7 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb, entry, skb->len); } else { struct cp_desc *txd; - u32 first_len, first_eor; + u32 first_len, first_eor, ctrl; dma_addr_t first_mapping; int frag, first_entry = entry; const struct iphdr *ip = ip_hdr(skb); @@ -810,7 +810,6 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb, for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) { const skb_frag_t *this_frag = &skb_shinfo(skb)->frags[frag]; u32 len; - u32 ctrl; dma_addr_t mapping; entry = NEXT_TX(entry); @@ -858,20 +857,19 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb, txd->addr = cpu_to_le64(first_mapping); wmb(); - if (skb->ip_summed == CHECKSUM_PARTIAL) { + ctrl = first_eor | first_len | FirstFrag | DescOwn; + if (mss) + ctrl |= LargeSend | ((mss & MSSMask) << MSSShift); + else if (skb->ip_summed == CHECKSUM_PARTIAL) { if (ip->protocol == IPPROTO_TCP) - txd->opts1 = cpu_to_le32(first_eor | first_len | - FirstFrag | DescOwn | - IPCS | TCPCS); + ctrl |= IPCS | TCPCS; else if (ip->protocol == IPPROTO_UDP) - txd->opts1 = cpu_to_le32(first_eor | first_len | - FirstFrag | DescOwn | - IPCS | UDPCS); + ctrl |= IPCS | UDPCS; else BUG(); - } else - txd->opts1 = cpu_to_le32(first_eor | first_len | - FirstFrag | DescOwn); + } + + txd->opts1 = cpu_to_le32(ctrl); wmb(); netif_dbg(cp, tx_queued, cp->dev, "tx queued, slots %d-%d, skblen %d\n", -- cgit v1.2.3 From 0a5aeee0b79fa99d8e04c98dd4e87d4f52aa497b Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 23 Sep 2015 09:44:57 +0100 Subject: 8139cp: Reduce duplicate csum/tso code in cp_start_xmit() We calculate the value of the opts1 descriptor field in three different places. With two different behaviours when given an invalid packet to be checksummed — none of them correct. Sort that out. Signed-off-by: David Woodhouse Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139cp.c | 61 ++++++++++++----------------------- 1 file changed, 20 insertions(+), 41 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index 75a8cee6b1d6..b3bd8b103593 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -733,7 +733,7 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb, { struct cp_private *cp = netdev_priv(dev); unsigned entry; - u32 eor, flags; + u32 eor, opts1; unsigned long intr_flags; __le32 opts2; int mss = 0; @@ -753,6 +753,21 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb, mss = skb_shinfo(skb)->gso_size; opts2 = cpu_to_le32(cp_tx_vlan_tag(skb)); + opts1 = DescOwn; + if (mss) + opts1 |= LargeSend | ((mss & MSSMask) << MSSShift); + else if (skb->ip_summed == CHECKSUM_PARTIAL) { + const struct iphdr *ip = ip_hdr(skb); + if (ip->protocol == IPPROTO_TCP) + opts1 |= IPCS | TCPCS; + else if (ip->protocol == IPPROTO_UDP) + opts1 |= IPCS | UDPCS; + else { + WARN_ONCE(1, + "Net bug: asked to checksum invalid Legacy IP packet\n"); + goto out_dma_error; + } + } if (skb_shinfo(skb)->nr_frags == 0) { struct cp_desc *txd = &cp->tx_ring[entry]; @@ -768,21 +783,9 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb, txd->addr = cpu_to_le64(mapping); wmb(); - flags = eor | len | DescOwn | FirstFrag | LastFrag; - - if (mss) - flags |= LargeSend | ((mss & MSSMask) << MSSShift); - else if (skb->ip_summed == CHECKSUM_PARTIAL) { - const struct iphdr *ip = ip_hdr(skb); - if (ip->protocol == IPPROTO_TCP) - flags |= IPCS | TCPCS; - else if (ip->protocol == IPPROTO_UDP) - flags |= IPCS | UDPCS; - else - WARN_ON(1); /* we need a WARN() */ - } + opts1 |= eor | len | FirstFrag | LastFrag; - txd->opts1 = cpu_to_le32(flags); + txd->opts1 = cpu_to_le32(opts1); wmb(); cp->tx_skb[entry] = skb; @@ -793,7 +796,6 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb, u32 first_len, first_eor, ctrl; dma_addr_t first_mapping; int frag, first_entry = entry; - const struct iphdr *ip = ip_hdr(skb); /* We must give this initial chunk to the device last. * Otherwise we could race with the device. @@ -825,19 +827,7 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb, eor = (entry == (CP_TX_RING_SIZE - 1)) ? RingEnd : 0; - ctrl = eor | len | DescOwn; - - if (mss) - ctrl |= LargeSend | - ((mss & MSSMask) << MSSShift); - else if (skb->ip_summed == CHECKSUM_PARTIAL) { - if (ip->protocol == IPPROTO_TCP) - ctrl |= IPCS | TCPCS; - else if (ip->protocol == IPPROTO_UDP) - ctrl |= IPCS | UDPCS; - else - BUG(); - } + ctrl = opts1 | eor | len; if (frag == skb_shinfo(skb)->nr_frags - 1) ctrl |= LastFrag; @@ -857,18 +847,7 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb, txd->addr = cpu_to_le64(first_mapping); wmb(); - ctrl = first_eor | first_len | FirstFrag | DescOwn; - if (mss) - ctrl |= LargeSend | ((mss & MSSMask) << MSSShift); - else if (skb->ip_summed == CHECKSUM_PARTIAL) { - if (ip->protocol == IPPROTO_TCP) - ctrl |= IPCS | TCPCS; - else if (ip->protocol == IPPROTO_UDP) - ctrl |= IPCS | UDPCS; - else - BUG(); - } - + ctrl = opts1 | first_eor | first_len | FirstFrag; txd->opts1 = cpu_to_le32(ctrl); wmb(); -- cgit v1.2.3 From 7f4c685633e2df9ba10d49a31dda13715745db37 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 23 Sep 2015 09:45:16 +0100 Subject: 8139cp: Fix DMA unmapping of transmitted buffers The low 16 bits of the 'opts1' field in the TX descriptor are supposed to still contain the buffer length when the descriptor is handed back to us. In practice, at least on my hardware, they don't. So stash the original value of the opts1 field and get the length to unmap from there. There are other ways we could have worked out the length, but I actually want a stash of the opts1 field anyway so that I can dump it alongside the contents of the descriptor ring when we suffer a TX timeout. Signed-off-by: David Woodhouse Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139cp.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index b3bd8b103593..ec6bd864b263 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -341,6 +341,7 @@ struct cp_private { unsigned tx_tail; struct cp_desc *tx_ring; struct sk_buff *tx_skb[CP_TX_RING_SIZE]; + u32 tx_opts[CP_TX_RING_SIZE]; unsigned rx_buf_sz; unsigned wol_enabled : 1; /* Is Wake-on-LAN enabled? */ @@ -665,7 +666,7 @@ static void cp_tx (struct cp_private *cp) BUG_ON(!skb); dma_unmap_single(&cp->pdev->dev, le64_to_cpu(txd->addr), - le32_to_cpu(txd->opts1) & 0xffff, + cp->tx_opts[tx_tail] & 0xffff, PCI_DMA_TODEVICE); if (status & LastFrag) { @@ -789,6 +790,7 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb, wmb(); cp->tx_skb[entry] = skb; + cp->tx_opts[entry] = opts1; netif_dbg(cp, tx_queued, cp->dev, "tx queued, slot %d, skblen %d\n", entry, skb->len); } else { @@ -839,6 +841,8 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb, txd->opts1 = cpu_to_le32(ctrl); wmb(); + + cp->tx_opts[entry] = ctrl; cp->tx_skb[entry] = skb; } @@ -851,6 +855,7 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb, txd->opts1 = cpu_to_le32(ctrl); wmb(); + cp->tx_opts[first_entry] = ctrl; netif_dbg(cp, tx_queued, cp->dev, "tx queued, slots %d-%d, skblen %d\n", first_entry, entry, skb->len); } @@ -1093,6 +1098,7 @@ static int cp_init_rings (struct cp_private *cp) { memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE); cp->tx_ring[CP_TX_RING_SIZE - 1].opts1 = cpu_to_le32(RingEnd); + memset(cp->tx_opts, 0, sizeof(cp->tx_opts)); cp_init_rings_index(cp); @@ -1150,6 +1156,7 @@ static void cp_clean_rings (struct cp_private *cp) memset(cp->rx_ring, 0, sizeof(struct cp_desc) * CP_RX_RING_SIZE); memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE); + memset(cp->tx_opts, 0, sizeof(cp->tx_opts)); memset(cp->rx_skb, 0, sizeof(struct sk_buff *) * CP_RX_RING_SIZE); memset(cp->tx_skb, 0, sizeof(struct sk_buff *) * CP_TX_RING_SIZE); -- cgit v1.2.3 From 41b976414c88016e2c9d9b2f6667ee67a998d388 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 23 Sep 2015 09:45:31 +0100 Subject: 8139cp: Dump contents of descriptor ring on TX timeout We are seeing unexplained TX timeouts under heavy load. Let's try to get a better idea of what's going on. Signed-off-by: David Woodhouse Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139cp.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index ec6bd864b263..686334f4588d 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -157,6 +157,7 @@ enum { NWayAdvert = 0x66, /* MII ADVERTISE */ NWayLPAR = 0x68, /* MII LPA */ NWayExpansion = 0x6A, /* MII Expansion */ + TxDmaOkLowDesc = 0x82, /* Low 16 bit address of a Tx descriptor. */ Config5 = 0xD8, /* Config5 */ TxPoll = 0xD9, /* Tell chip to check Tx descriptors for work */ RxMaxSize = 0xDA, /* Max size of an Rx packet (8169 only) */ @@ -1234,7 +1235,7 @@ static void cp_tx_timeout(struct net_device *dev) { struct cp_private *cp = netdev_priv(dev); unsigned long flags; - int rc; + int rc, i; netdev_warn(dev, "Transmit timeout, status %2x %4x %4x %4x\n", cpr8(Cmd), cpr16(CpCmd), @@ -1242,6 +1243,17 @@ static void cp_tx_timeout(struct net_device *dev) spin_lock_irqsave(&cp->lock, flags); + netif_dbg(cp, tx_err, cp->dev, "TX ring head %d tail %d desc %x\n", + cp->tx_head, cp->tx_tail, cpr16(TxDmaOkLowDesc)); + for (i = 0; i < CP_TX_RING_SIZE; i++) { + netif_dbg(cp, tx_err, cp->dev, + "TX slot %d @%p: %08x (%08x) %08x %llx %p\n", + i, &cp->tx_ring[i], le32_to_cpu(cp->tx_ring[i].opts1), + cp->tx_opts[i], le32_to_cpu(cp->tx_ring[i].opts2), + le64_to_cpu(cp->tx_ring[i].addr), + cp->tx_skb[i]); + } + cp_stop_hw(cp); cp_clean_rings(cp); rc = cp_init_rings(cp); -- cgit v1.2.3 From 7bbe33ff1896d225588b37c574c0d80dbc63c657 Mon Sep 17 00:00:00 2001 From: John W. Linville Date: Tue, 22 Sep 2015 13:09:32 -0400 Subject: geneve: use network byte order for destination port config parameter This is primarily for consistancy with vxlan and other tunnels which use network byte order for similar parameters. Signed-off-by: John W. Linville Signed-off-by: David S. Miller --- drivers/net/geneve.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 4ce8b7b90c7c..8f5c02eed47d 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -815,7 +815,7 @@ static struct geneve_dev *geneve_find_dev(struct geneve_net *gn, static int geneve_configure(struct net *net, struct net_device *dev, __be32 rem_addr, __u32 vni, __u8 ttl, __u8 tos, - __u16 dst_port, bool metadata) + __be16 dst_port, bool metadata) { struct geneve_net *gn = net_generic(net, geneve_net_id); struct geneve_dev *t, *geneve = netdev_priv(dev); @@ -840,10 +840,10 @@ static int geneve_configure(struct net *net, struct net_device *dev, geneve->ttl = ttl; geneve->tos = tos; - geneve->dst_port = htons(dst_port); + geneve->dst_port = dst_port; geneve->collect_md = metadata; - t = geneve_find_dev(gn, htons(dst_port), rem_addr, geneve->vni, + t = geneve_find_dev(gn, dst_port, rem_addr, geneve->vni, &tun_on_same_port, &tun_collect_md); if (t) return -EBUSY; @@ -867,7 +867,7 @@ static int geneve_configure(struct net *net, struct net_device *dev, static int geneve_newlink(struct net *net, struct net_device *dev, struct nlattr *tb[], struct nlattr *data[]) { - __u16 dst_port = GENEVE_UDP_PORT; + __be16 dst_port = htons(GENEVE_UDP_PORT); __u8 ttl = 0, tos = 0; bool metadata = false; __be32 rem_addr; @@ -886,7 +886,7 @@ static int geneve_newlink(struct net *net, struct net_device *dev, tos = nla_get_u8(data[IFLA_GENEVE_TOS]); if (data[IFLA_GENEVE_PORT]) - dst_port = nla_get_u16(data[IFLA_GENEVE_PORT]); + dst_port = nla_get_be16(data[IFLA_GENEVE_PORT]); if (data[IFLA_GENEVE_COLLECT_METADATA]) metadata = true; @@ -909,7 +909,7 @@ static size_t geneve_get_size(const struct net_device *dev) nla_total_size(sizeof(struct in_addr)) + /* IFLA_GENEVE_REMOTE */ nla_total_size(sizeof(__u8)) + /* IFLA_GENEVE_TTL */ nla_total_size(sizeof(__u8)) + /* IFLA_GENEVE_TOS */ - nla_total_size(sizeof(__u16)) + /* IFLA_GENEVE_PORT */ + nla_total_size(sizeof(__be16)) + /* IFLA_GENEVE_PORT */ nla_total_size(0) + /* IFLA_GENEVE_COLLECT_METADATA */ 0; } @@ -931,7 +931,7 @@ static int geneve_fill_info(struct sk_buff *skb, const struct net_device *dev) nla_put_u8(skb, IFLA_GENEVE_TOS, geneve->tos)) goto nla_put_failure; - if (nla_put_u16(skb, IFLA_GENEVE_PORT, ntohs(geneve->dst_port))) + if (nla_put_be16(skb, IFLA_GENEVE_PORT, geneve->dst_port)) goto nla_put_failure; if (geneve->collect_md) { @@ -971,7 +971,7 @@ struct net_device *geneve_dev_create_fb(struct net *net, const char *name, if (IS_ERR(dev)) return dev; - err = geneve_configure(net, dev, 0, 0, 0, 0, dst_port, true); + err = geneve_configure(net, dev, 0, 0, 0, 0, htons(dst_port), true); if (err) { free_netdev(dev); return ERR_PTR(err); -- cgit v1.2.3 From d5b8d6404395641987db76e28334cae4cef771ae Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Mon, 21 Sep 2015 16:47:09 +0100 Subject: net: gianfar: remove misuse of IRQF_NO_SUSPEND flag The device is set as wakeup capable using proper wakeup API but the driver misuses IRQF_NO_SUSPEND to set the interrupt as wakeup source which is incorrect. This patch removes the use of IRQF_NO_SUSPEND flags replacing it with enable_irq_wake instead. Cc: "David S. Miller" Cc: Claudiu Manoil Cc: Kevin Hao Cc: netdev@vger.kernel.org Signed-off-by: Sudeep Holla Acked-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 4b69d061d90f..803ed4c93503 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -1970,8 +1970,7 @@ static int register_grp_irqs(struct gfar_priv_grp *grp) /* Install our interrupt handlers for Error, * Transmit, and Receive */ - err = request_irq(gfar_irq(grp, ER)->irq, gfar_error, - IRQF_NO_SUSPEND, + err = request_irq(gfar_irq(grp, ER)->irq, gfar_error, 0, gfar_irq(grp, ER)->name, grp); if (err < 0) { netif_err(priv, intr, dev, "Can't get IRQ %d\n", @@ -1979,6 +1978,8 @@ static int register_grp_irqs(struct gfar_priv_grp *grp) goto err_irq_fail; } + enable_irq_wake(gfar_irq(grp, ER)->irq); + err = request_irq(gfar_irq(grp, TX)->irq, gfar_transmit, 0, gfar_irq(grp, TX)->name, grp); if (err < 0) { @@ -1994,14 +1995,14 @@ static int register_grp_irqs(struct gfar_priv_grp *grp) goto rx_irq_fail; } } else { - err = request_irq(gfar_irq(grp, TX)->irq, gfar_interrupt, - IRQF_NO_SUSPEND, + err = request_irq(gfar_irq(grp, TX)->irq, gfar_interrupt, 0, gfar_irq(grp, TX)->name, grp); if (err < 0) { netif_err(priv, intr, dev, "Can't get IRQ %d\n", gfar_irq(grp, TX)->irq); goto err_irq_fail; } + enable_irq_wake(gfar_irq(grp, TX)->irq); } return 0; -- cgit v1.2.3 From d682d2bdc30650a5c7ce9908ab83ab674b658744 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 22 Sep 2015 17:04:58 -0700 Subject: bnx2x: byte swap rss_key to comply to Toeplitz specs After a good amount of debugging, I found bnx2x was byte swaping the 40 bytes of rss_key. If we byte swap the key, then bnx2x generates hashes matching MSDN specs as documented in (Verifying the RSS Hash Calculation) https://msdn.microsoft.com/en-us/library/windows/hardware/ff571021% 28v=vs.85%29.aspx It is mostly a non issue, unless we want to mix different NIC in a host, and want consistent hashing among all of them, ie if they all use the boot time generated rss key, or if some application is choosing specific tuple(s) so that incoming traffic lands into known rx queue(s). Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index c9bd7f16018e..ff702a707a91 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -4319,8 +4319,16 @@ static int bnx2x_setup_rss(struct bnx2x *bp, /* RSS keys */ if (test_bit(BNX2X_RSS_SET_SRCH, &p->rss_flags)) { - memcpy(&data->rss_key[0], &p->rss_key[0], - sizeof(data->rss_key)); + u8 *dst = (u8 *)(data->rss_key) + sizeof(data->rss_key); + const u8 *src = (const u8 *)p->rss_key; + int i; + + /* Apparently, bnx2x reads this array in reverse order + * We need to byte swap rss_key to comply with Toeplitz specs. + */ + for (i = 0; i < sizeof(data->rss_key); i++) + *--dst = *src++; + caps |= ETH_RSS_UPDATE_RAMROD_DATA_UPDATE_RSS_KEY; } -- cgit v1.2.3 From a136442131443d929d2d8d243157824de4dfbae8 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 24 Sep 2015 20:35:52 +0100 Subject: phy: fix of_mdio_find_bus() device refcount leak of_mdio_find_bus() leaks a struct device refcount, caused by using class_find_device() and not realising that the device reference has its refcount incremented: * Note, you will need to drop the reference with put_device() after use. ... while ((dev = class_dev_iter_next(&iter))) { if (match(dev, data)) { get_device(dev); break; } Update the comment, and arrange for the phy code to drop this refcount when disposing of a reference to it. Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/mdio-mux.c | 19 +++++++++++++------ drivers/net/phy/mdio_bus.c | 4 +++- 2 files changed, 16 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/mdio-mux.c b/drivers/net/phy/mdio-mux.c index 4d4d25efc1e1..280c7c311f72 100644 --- a/drivers/net/phy/mdio-mux.c +++ b/drivers/net/phy/mdio-mux.c @@ -113,18 +113,18 @@ int mdio_mux_init(struct device *dev, if (!parent_bus_node) return -ENODEV; - parent_bus = of_mdio_find_bus(parent_bus_node); - if (parent_bus == NULL) { - ret_val = -EPROBE_DEFER; - goto err_parent_bus; - } - pb = devm_kzalloc(dev, sizeof(*pb), GFP_KERNEL); if (pb == NULL) { ret_val = -ENOMEM; goto err_parent_bus; } + parent_bus = of_mdio_find_bus(parent_bus_node); + if (parent_bus == NULL) { + ret_val = -EPROBE_DEFER; + goto err_parent_bus; + } + pb->switch_data = data; pb->switch_fn = switch_fn; pb->current_child = -1; @@ -173,6 +173,10 @@ int mdio_mux_init(struct device *dev, dev_info(dev, "Version " DRV_VERSION "\n"); return 0; } + + /* balance the reference of_mdio_find_bus() took */ + put_device(&pb->mii_bus->dev); + err_parent_bus: of_node_put(parent_bus_node); return ret_val; @@ -189,6 +193,9 @@ void mdio_mux_uninit(void *mux_handle) mdiobus_free(cb->mii_bus); cb = cb->next; } + + /* balance the reference of_mdio_find_bus() in mdio_mux_init() took */ + put_device(&pb->mii_bus->dev); } EXPORT_SYMBOL_GPL(mdio_mux_uninit); diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 02a4615b65f8..67553e13bd36 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -167,7 +167,9 @@ static int of_mdio_bus_match(struct device *dev, const void *mdio_bus_np) * of_mdio_find_bus - Given an mii_bus node, find the mii_bus. * @mdio_bus_np: Pointer to the mii_bus. * - * Returns a pointer to the mii_bus, or NULL if none found. + * Returns a reference to the mii_bus, or NULL if none found. The + * embedded struct device will have its reference count incremented, + * and this must be put once the bus is finished with. * * Because the association of a device_node and mii_bus is made via * of_mdiobus_register(), the mii_bus cannot be found before it is -- cgit v1.2.3 From 3e3aaf649416988ca8be4ad2c52dc24d8be7b46e Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 24 Sep 2015 20:36:02 +0100 Subject: phy: fix mdiobus module safety Re-implement the mdiobus module refcounting to ensure that we actually ensure that the mdiobus module code does not go away while we might call into it. The old scheme using bus->dev.driver was buggy, because bus->dev is a class device which never has a struct device_driver associated with it, and hence the associated code trying to obtain a refcount did nothing useful. Instead, take the approach that other subsystems do: pass the module when calling mdiobus_register(), and record that in the mii_bus struct. When we need to increment the module use count in the phy code, use this stored pointer. When the phy is deteched, drop the module refcount, remembering that the phy device might go away at that point. This doesn't stop the mii_bus going away while there are in-use phys - it merely stops the underlying code vanishing. Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/mdio_bus.c | 5 +++-- drivers/net/phy/phy_device.c | 32 ++++++++++++++++++-------------- include/linux/phy.h | 5 ++++- 3 files changed, 25 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 67553e13bd36..992406624b7c 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -244,7 +244,7 @@ static inline void of_mdiobus_link_phydev(struct mii_bus *mdio, * * Returns 0 on success or < 0 on error. */ -int mdiobus_register(struct mii_bus *bus) +int __mdiobus_register(struct mii_bus *bus, struct module *owner) { int i, err; @@ -255,6 +255,7 @@ int mdiobus_register(struct mii_bus *bus) BUG_ON(bus->state != MDIOBUS_ALLOCATED && bus->state != MDIOBUS_UNREGISTERED); + bus->owner = owner; bus->dev.parent = bus->parent; bus->dev.class = &mdio_bus_class; bus->dev.groups = NULL; @@ -296,7 +297,7 @@ error: device_del(&bus->dev); return err; } -EXPORT_SYMBOL(mdiobus_register); +EXPORT_SYMBOL(__mdiobus_register); void mdiobus_unregister(struct mii_bus *bus) { diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index c0f211127274..03adf328f49b 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -582,10 +582,15 @@ EXPORT_SYMBOL(phy_init_hw); int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, u32 flags, phy_interface_t interface) { + struct mii_bus *bus = phydev->bus; struct device *d = &phydev->dev; - struct module *bus_module; int err; + if (!try_module_get(bus->owner)) { + dev_err(&dev->dev, "failed to get the bus module\n"); + return -EIO; + } + /* Assume that if there is no driver, that it doesn't * exist, and we should use the genphy driver. */ @@ -600,20 +605,13 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, err = device_bind_driver(d); if (err) - return err; + goto error; } if (phydev->attached_dev) { dev_err(&dev->dev, "PHY already attached\n"); - return -EBUSY; - } - - /* Increment the bus module reference count */ - bus_module = phydev->bus->dev.driver ? - phydev->bus->dev.driver->owner : NULL; - if (!try_module_get(bus_module)) { - dev_err(&dev->dev, "failed to get the bus module\n"); - return -EIO; + err = -EBUSY; + goto error; } phydev->attached_dev = dev; @@ -636,6 +634,10 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, phy_resume(phydev); return err; + +error: + module_put(bus->owner); + return err; } EXPORT_SYMBOL(phy_attach_direct); @@ -680,11 +682,9 @@ EXPORT_SYMBOL(phy_attach); */ void phy_detach(struct phy_device *phydev) { + struct mii_bus *bus; int i; - if (phydev->bus->dev.driver) - module_put(phydev->bus->dev.driver->owner); - phydev->attached_dev->phydev = NULL; phydev->attached_dev = NULL; phy_suspend(phydev); @@ -700,6 +700,10 @@ void phy_detach(struct phy_device *phydev) break; } } + + bus = phydev->bus; + + module_put(bus->owner); } EXPORT_SYMBOL(phy_detach); diff --git a/include/linux/phy.h b/include/linux/phy.h index 962387a192f1..11bce44f6d65 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -153,6 +154,7 @@ struct sk_buff; * PHYs should register using this structure */ struct mii_bus { + struct module *owner; const char *name; char id[MII_BUS_ID_SIZE]; void *priv; @@ -198,7 +200,8 @@ static inline struct mii_bus *mdiobus_alloc(void) return mdiobus_alloc_size(0); } -int mdiobus_register(struct mii_bus *bus); +int __mdiobus_register(struct mii_bus *bus, struct module *owner); +#define mdiobus_register(bus) __mdiobus_register(bus, THIS_MODULE) void mdiobus_unregister(struct mii_bus *bus); void mdiobus_free(struct mii_bus *bus); struct mii_bus *devm_mdiobus_alloc_size(struct device *dev, int sizeof_priv); -- cgit v1.2.3 From 7322967bc1bd97ac9c49ecea19e5a1f681ca27ee Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 24 Sep 2015 20:36:08 +0100 Subject: phy: add proper phy struct device refcounting Take a refcount on the phy struct device when the phy device is attached to a network device, and drop it after it's detached. This ensures that a refcount is held on the phy device while the device is being used by a network device, thereby preventing the phy_device from being unexpectedly kfree()'d by phy_device_release(). Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 03adf328f49b..97a4f52addac 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -578,6 +578,7 @@ EXPORT_SYMBOL(phy_init_hw); * generic driver is used. The phy_device is given a ptr to * the attaching device, and given a callback for link status * change. The phy_device is returned to the attaching driver. + * This function takes a reference on the phy device. */ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, u32 flags, phy_interface_t interface) @@ -591,6 +592,8 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, return -EIO; } + get_device(d); + /* Assume that if there is no driver, that it doesn't * exist, and we should use the genphy driver. */ @@ -636,6 +639,7 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, return err; error: + put_device(d); module_put(bus->owner); return err; } @@ -679,6 +683,9 @@ EXPORT_SYMBOL(phy_attach); /** * phy_detach - detach a PHY device from its network device * @phydev: target phy_device struct + * + * This detaches the phy device from its network device and the phy + * driver, and drops the reference count taken in phy_attach_direct(). */ void phy_detach(struct phy_device *phydev) { @@ -701,8 +708,13 @@ void phy_detach(struct phy_device *phydev) } } + /* + * The phydev might go away on the put_device() below, so avoid + * a use-after-free bug by reading the underlying bus first. + */ bus = phydev->bus; + put_device(&phydev->dev); module_put(bus->owner); } EXPORT_SYMBOL(phy_detach); -- cgit v1.2.3 From f018ae7a8c576345d56a0cd40d86c0574a2eb360 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 24 Sep 2015 20:36:13 +0100 Subject: of_mdio: fix MDIO phy device refcounting bus_find_device() is defined as: * This is similar to the bus_for_each_dev() function above, but it * returns a reference to a device that is 'found' for later use, as * determined by the @match callback. and it does indeed return a reference-counted pointer to the device: while ((dev = next_device(&i))) if (match(dev, data) && get_device(dev)) ^^^^^^^^^^^^^^^ break; klist_iter_exit(&i); return dev; What that means is that when we're done with the struct device, we must drop that reference. Neither of_phy_connect() nor of_phy_attach() did this when phy_connect_direct() or phy_attach_direct() failed. With our previous patch, phy_connect_direct() and phy_attach_direct() take a new refcount on the phy device when successful, so we can drop our local reference immediatley after these functions, whether or not they succeeded. Signed-off-by: Russell King Acked-by: Rob Herring Signed-off-by: David S. Miller --- drivers/of/of_mdio.c | 27 +++++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index 1350fa25cdb0..a87a868fed64 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -197,7 +197,8 @@ static int of_phy_match(struct device *dev, void *phy_np) * of_phy_find_device - Give a PHY node, find the phy_device * @phy_np: Pointer to the phy's device tree node * - * Returns a pointer to the phy_device. + * If successful, returns a pointer to the phy_device with the embedded + * struct device refcount incremented by one, or NULL on failure. */ struct phy_device *of_phy_find_device(struct device_node *phy_np) { @@ -217,7 +218,9 @@ EXPORT_SYMBOL(of_phy_find_device); * @hndlr: Link state callback for the network device * @iface: PHY data interface type * - * Returns a pointer to the phy_device if successful. NULL otherwise + * If successful, returns a pointer to the phy_device with the embedded + * struct device refcount incremented by one, or NULL on failure. The + * refcount must be dropped by calling phy_disconnect() or phy_detach(). */ struct phy_device *of_phy_connect(struct net_device *dev, struct device_node *phy_np, @@ -225,13 +228,19 @@ struct phy_device *of_phy_connect(struct net_device *dev, phy_interface_t iface) { struct phy_device *phy = of_phy_find_device(phy_np); + int ret; if (!phy) return NULL; phy->dev_flags = flags; - return phy_connect_direct(dev, phy, hndlr, iface) ? NULL : phy; + ret = phy_connect_direct(dev, phy, hndlr, iface); + + /* refcount is held by phy_connect_direct() on success */ + put_device(&phy->dev); + + return ret ? NULL : phy; } EXPORT_SYMBOL(of_phy_connect); @@ -241,17 +250,27 @@ EXPORT_SYMBOL(of_phy_connect); * @phy_np: Node pointer for the PHY * @flags: flags to pass to the PHY * @iface: PHY data interface type + * + * If successful, returns a pointer to the phy_device with the embedded + * struct device refcount incremented by one, or NULL on failure. The + * refcount must be dropped by calling phy_disconnect() or phy_detach(). */ struct phy_device *of_phy_attach(struct net_device *dev, struct device_node *phy_np, u32 flags, phy_interface_t iface) { struct phy_device *phy = of_phy_find_device(phy_np); + int ret; if (!phy) return NULL; - return phy_attach_direct(dev, phy, flags, iface) ? NULL : phy; + ret = phy_attach_direct(dev, phy, flags, iface); + + /* refcount is held by phy_attach_direct() on success */ + put_device(&phy->dev); + + return ret ? NULL : phy; } EXPORT_SYMBOL(of_phy_attach); -- cgit v1.2.3 From 04d53b20fe44afe635b3d4438b437f7a12927e9a Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 24 Sep 2015 20:36:18 +0100 Subject: net: fix phy refcounting in a bunch of drivers of_phy_find_device() increments the phy struct device refcount, which we need to properly balance. Add code to network drivers using this function to ensure that the struct device refcount is correctly balanced. For xgene, looking back in the history, we should be able to use of_phy_connect() with a zero flags argument for the DT case as this is how the driver used to operate prior to de7b5b3d790a ("net: eth: xgene: change APM X-Gene SoC platform ethernet to support ACPI"). This leaves the Cavium Thunder BGX unfixed; fixing this driver is a complicated task, one which the maintainers need to be involved with. Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/ethernet/apm/xgene/xgene_enet_hw.c | 24 ++++++++++++++++-------- drivers/net/ethernet/freescale/gianfar.c | 3 +++ drivers/net/ethernet/freescale/ucc_geth.c | 8 +++++++- drivers/net/ethernet/marvell/mvneta.c | 2 ++ drivers/net/ethernet/xilinx/xilinx_emaclite.c | 2 ++ 5 files changed, 30 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c index cfa37041ab71..c4bb8027b3fb 100644 --- a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c @@ -689,16 +689,24 @@ static int xgene_enet_phy_connect(struct net_device *ndev) netdev_dbg(ndev, "No phy-handle found in DT\n"); return -ENODEV; } - pdata->phy_dev = of_phy_find_device(phy_np); - } - phy_dev = pdata->phy_dev; + phy_dev = of_phy_connect(ndev, phy_np, &xgene_enet_adjust_link, + 0, pdata->phy_mode); + if (!phy_dev) { + netdev_err(ndev, "Could not connect to PHY\n"); + return -ENODEV; + } + + pdata->phy_dev = phy_dev; + } else { + phy_dev = pdata->phy_dev; - if (!phy_dev || - phy_connect_direct(ndev, phy_dev, &xgene_enet_adjust_link, - pdata->phy_mode)) { - netdev_err(ndev, "Could not connect to PHY\n"); - return -ENODEV; + if (!phy_dev || + phy_connect_direct(ndev, phy_dev, &xgene_enet_adjust_link, + pdata->phy_mode)) { + netdev_err(ndev, "Could not connect to PHY\n"); + return -ENODEV; + } } pdata->phy_speed = SPEED_UNKNOWN; diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 803ed4c93503..a5cf4332d307 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -1702,6 +1702,7 @@ static void gfar_configure_serdes(struct net_device *dev) tbiphy = of_phy_find_device(priv->tbi_node); if (!tbiphy) { dev_err(&dev->dev, "error: Could not get TBI device\n"); + put_device(&tbiphy->dev); return; } @@ -1723,6 +1724,8 @@ static void gfar_configure_serdes(struct net_device *dev) phy_write(tbiphy, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART | BMCR_FULLDPLX | BMCR_SPEED1000); + + put_device(&tbiphy->dev); } static int __gfar_is_rx_idle(struct gfar_private *priv) diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c index 4dd40e057f40..650f7888e32b 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.c +++ b/drivers/net/ethernet/freescale/ucc_geth.c @@ -1384,6 +1384,8 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth) value = phy_read(tbiphy, ENET_TBI_MII_CR); value &= ~0x1000; /* Turn off autonegotiation */ phy_write(tbiphy, ENET_TBI_MII_CR, value); + + put_device(&tbiphy->dev); } init_check_frame_length_mode(ug_info->lengthCheckRx, &ug_regs->maccfg2); @@ -1702,8 +1704,10 @@ static void uec_configure_serdes(struct net_device *dev) * everything for us? Resetting it takes the link down and requires * several seconds for it to come back. */ - if (phy_read(tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS) + if (phy_read(tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS) { + put_device(&tbiphy->dev); return; + } /* Single clk mode, mii mode off(for serdes communication) */ phy_write(tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS); @@ -1711,6 +1715,8 @@ static void uec_configure_serdes(struct net_device *dev) phy_write(tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT); phy_write(tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS); + + put_device(&tbiphy->dev); } /* Configure the PHY for dev. diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 09ec32e33076..514df76fc70f 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -3175,6 +3175,8 @@ static int mvneta_probe(struct platform_device *pdev) struct phy_device *phy = of_phy_find_device(dn); mvneta_fixed_link_update(pp, phy); + + put_device(&phy->dev); } return 0; diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c index 6008eee01a33..cf468c87ce57 100644 --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c @@ -828,6 +828,8 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev) if (!phydev) dev_info(dev, "MDIO of the phy is not registered yet\n"); + else + put_device(&phydev->dev); return 0; } -- cgit v1.2.3 From d618bf2bfd2a095644c852ebea16f5a981f9d875 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 24 Sep 2015 20:36:23 +0100 Subject: phy: fixed-phy: properly validate phy in fixed_phy_update_state() Validate that the phy_device passed into fixed_phy_update_state() is a fixed-phy device before walking the list of phys for a fixed phy at the same address. Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/fixed_phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/phy/fixed_phy.c b/drivers/net/phy/fixed_phy.c index fb1299c6326e..e23bf5b90e17 100644 --- a/drivers/net/phy/fixed_phy.c +++ b/drivers/net/phy/fixed_phy.c @@ -220,7 +220,7 @@ int fixed_phy_update_state(struct phy_device *phydev, struct fixed_mdio_bus *fmb = &platform_fmb; struct fixed_phy *fp; - if (!phydev || !phydev->bus) + if (!phydev || phydev->bus != fmb->mii_bus) return -EINVAL; list_for_each_entry(fp, &fmb->phys, node) { -- cgit v1.2.3 From 38737e490d4ea91660d3cec83ef88c4e6d360ae4 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 24 Sep 2015 20:36:28 +0100 Subject: phy: add phy_device_remove() Add a phy_device_remove() function to complement phy_device_register(), which undoes the effects of phy_device_register() by removing the phy device from visibility, but not freeing it. This allows these details to be moved out of the mdio bus code into the phy code where this action belongs. Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/gianfar.c | 5 +++-- drivers/net/phy/mdio_bus.c | 15 ++++++++++----- drivers/net/phy/phy_device.c | 18 ++++++++++++++++++ include/linux/phy.h | 1 + 4 files changed, 32 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index a5cf4332d307..710715fcb23d 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -1702,7 +1702,6 @@ static void gfar_configure_serdes(struct net_device *dev) tbiphy = of_phy_find_device(priv->tbi_node); if (!tbiphy) { dev_err(&dev->dev, "error: Could not get TBI device\n"); - put_device(&tbiphy->dev); return; } @@ -1711,8 +1710,10 @@ static void gfar_configure_serdes(struct net_device *dev) * everything for us? Resetting it takes the link down and requires * several seconds for it to come back. */ - if (phy_read(tbiphy, MII_BMSR) & BMSR_LSTATUS) + if (phy_read(tbiphy, MII_BMSR) & BMSR_LSTATUS) { + put_device(&tbiphy->dev); return; + } /* Single clk mode, mii mode off(for serdes communication) */ phy_write(tbiphy, MII_TBICON, TBICON_CLK_SELECT); diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 992406624b7c..c340e412b38f 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -291,8 +291,11 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner) error: while (--i >= 0) { - if (bus->phy_map[i]) - device_unregister(&bus->phy_map[i]->dev); + struct phy_device *phydev = bus->phy_map[i]; + if (phydev) { + phy_device_remove(phydev); + phy_device_free(phydev); + } } device_del(&bus->dev); return err; @@ -307,9 +310,11 @@ void mdiobus_unregister(struct mii_bus *bus) bus->state = MDIOBUS_UNREGISTERED; for (i = 0; i < PHY_MAX_ADDR; i++) { - if (bus->phy_map[i]) - device_unregister(&bus->phy_map[i]->dev); - bus->phy_map[i] = NULL; + struct phy_device *phydev = bus->phy_map[i]; + if (phydev) { + phy_device_remove(phydev); + phy_device_free(phydev); + } } device_del(&bus->dev); } diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 97a4f52addac..f761288abe66 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -383,6 +383,24 @@ int phy_device_register(struct phy_device *phydev) } EXPORT_SYMBOL(phy_device_register); +/** + * phy_device_remove - Remove a previously registered phy device from the MDIO bus + * @phydev: phy_device structure to remove + * + * This doesn't free the phy_device itself, it merely reverses the effects + * of phy_device_register(). Use phy_device_free() to free the device + * after calling this function. + */ +void phy_device_remove(struct phy_device *phydev) +{ + struct mii_bus *bus = phydev->bus; + int addr = phydev->addr; + + device_del(&phydev->dev); + bus->phy_map[addr] = NULL; +} +EXPORT_SYMBOL(phy_device_remove); + /** * phy_find_first - finds the first PHY device on the bus * @bus: the target MII bus diff --git a/include/linux/phy.h b/include/linux/phy.h index 11bce44f6d65..4a4e3a092337 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -745,6 +745,7 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, struct phy_c45_device_ids *c45_ids); struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45); int phy_device_register(struct phy_device *phy); +void phy_device_remove(struct phy_device *phydev); int phy_init_hw(struct phy_device *phydev); int phy_suspend(struct phy_device *phydev); int phy_resume(struct phy_device *phydev); -- cgit v1.2.3 From 357cd64c18404309aabefb82019b12773de31a12 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 24 Sep 2015 00:07:17 +0100 Subject: phy: marvell: add link partner advertised modes Read the standard link partner advertisment registers and store it in phydev->lp_advertising, so ethtool can report this information to userspace via ethtool. Zero it as per genphy if autonegotiation is disabled. Tested with a Marvell 88E1512 PHY. Signed-off-by: Russell King Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index e6897b6a8a53..5de8d5827536 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -785,6 +785,7 @@ static int marvell_read_status(struct phy_device *phydev) int adv; int err; int lpa; + int lpagb; int status = 0; /* Update the link, but return if there @@ -802,10 +803,17 @@ static int marvell_read_status(struct phy_device *phydev) if (lpa < 0) return lpa; + lpagb = phy_read(phydev, MII_STAT1000); + if (lpagb < 0) + return lpagb; + adv = phy_read(phydev, MII_ADVERTISE); if (adv < 0) return adv; + phydev->lp_advertising = mii_stat1000_to_ethtool_lpa_t(lpagb) | + mii_lpa_to_ethtool_lpa_t(lpa); + lpa &= adv; if (status & MII_M1011_PHY_STATUS_FULLDUPLEX) @@ -853,6 +861,7 @@ static int marvell_read_status(struct phy_device *phydev) phydev->speed = SPEED_10; phydev->pause = phydev->asym_pause = 0; + phydev->lp_advertising = 0; } return 0; -- cgit v1.2.3 From 21343ac21ec7d871e94e98e288f3398a4207d9c0 Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Thu, 24 Sep 2015 15:46:53 +0530 Subject: net: via/Kconfig: GENERIC_PCI_IOMAP required if PCI not selected The builds of allmodconfig of avr32 is failing with: drivers/net/ethernet/via/via-rhine.c:1098:2: error: implicit declaration of function 'pci_iomap' [-Werror=implicit-function-declaration] drivers/net/ethernet/via/via-rhine.c:1119:2: error: implicit declaration of function 'pci_iounmap' [-Werror=implicit-function-declaration] The generic empty pci_iomap and pci_iounmap is used only if CONFIG_PCI is not defined and CONFIG_GENERIC_PCI_IOMAP is defined. Add GENERIC_PCI_IOMAP in the dependency list for VIA_RHINE as we are getting build failure when CONFIG_PCI and CONFIG_GENERIC_PCI_IOMAP both are not defined. Signed-off-by: Sudip Mukherjee Signed-off-by: David S. Miller --- drivers/net/ethernet/via/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/via/Kconfig b/drivers/net/ethernet/via/Kconfig index 2f1264b882b9..d3d094742a7e 100644 --- a/drivers/net/ethernet/via/Kconfig +++ b/drivers/net/ethernet/via/Kconfig @@ -17,7 +17,7 @@ if NET_VENDOR_VIA config VIA_RHINE tristate "VIA Rhine support" - depends on (PCI || OF_IRQ) + depends on PCI || (OF_IRQ && GENERIC_PCI_IOMAP) depends on HAS_DMA select CRC32 select MII -- cgit v1.2.3 From 58a89ecaca53736aa465170530acea4f8be34ab4 Mon Sep 17 00:00:00 2001 From: Guillaume Nault Date: Thu, 24 Sep 2015 12:54:01 +0200 Subject: ppp: fix lockdep splat in ppp_dev_uninit() ppp_dev_uninit() locks all_ppp_mutex while under rtnl mutex protection. ppp_create_interface() must then lock these mutexes in that same order to avoid possible deadlock. [ 120.880011] ====================================================== [ 120.880011] [ INFO: possible circular locking dependency detected ] [ 120.880011] 4.2.0 #1 Not tainted [ 120.880011] ------------------------------------------------------- [ 120.880011] ppp-apitest/15827 is trying to acquire lock: [ 120.880011] (&pn->all_ppp_mutex){+.+.+.}, at: [] ppp_dev_uninit+0x64/0xb0 [ppp_generic] [ 120.880011] [ 120.880011] but task is already holding lock: [ 120.880011] (rtnl_mutex){+.+.+.}, at: [] rtnl_lock+0x12/0x14 [ 120.880011] [ 120.880011] which lock already depends on the new lock. [ 120.880011] [ 120.880011] [ 120.880011] the existing dependency chain (in reverse order) is: [ 120.880011] [ 120.880011] -> #1 (rtnl_mutex){+.+.+.}: [ 120.880011] [] lock_acquire+0xcf/0x10e [ 120.880011] [] mutex_lock_nested+0x56/0x341 [ 120.880011] [] rtnl_lock+0x12/0x14 [ 120.880011] [] register_netdev+0x11/0x27 [ 120.880011] [] ppp_ioctl+0x289/0xc98 [ppp_generic] [ 120.880011] [] do_vfs_ioctl+0x4ea/0x532 [ 120.880011] [] SyS_ioctl+0x4e/0x7d [ 120.880011] [] entry_SYSCALL_64_fastpath+0x12/0x6f [ 120.880011] [ 120.880011] -> #0 (&pn->all_ppp_mutex){+.+.+.}: [ 120.880011] [] __lock_acquire+0xb07/0xe76 [ 120.880011] [] lock_acquire+0xcf/0x10e [ 120.880011] [] mutex_lock_nested+0x56/0x341 [ 120.880011] [] ppp_dev_uninit+0x64/0xb0 [ppp_generic] [ 120.880011] [] rollback_registered_many+0x19e/0x252 [ 120.880011] [] rollback_registered+0x29/0x38 [ 120.880011] [] unregister_netdevice_queue+0x6a/0x77 [ 120.880011] [] ppp_release+0x42/0x79 [ppp_generic] [ 120.880011] [] __fput+0xec/0x192 [ 120.880011] [] ____fput+0x9/0xb [ 120.880011] [] task_work_run+0x66/0x80 [ 120.880011] [] prepare_exit_to_usermode+0x8c/0xa7 [ 120.880011] [] syscall_return_slowpath+0xe4/0x104 [ 120.880011] [] int_ret_from_sys_call+0x25/0x9f [ 120.880011] [ 120.880011] other info that might help us debug this: [ 120.880011] [ 120.880011] Possible unsafe locking scenario: [ 120.880011] [ 120.880011] CPU0 CPU1 [ 120.880011] ---- ---- [ 120.880011] lock(rtnl_mutex); [ 120.880011] lock(&pn->all_ppp_mutex); [ 120.880011] lock(rtnl_mutex); [ 120.880011] lock(&pn->all_ppp_mutex); [ 120.880011] [ 120.880011] *** DEADLOCK *** Fixes: 8cb775bc0a34 ("ppp: fix device unregistration upon netns deletion") Reported-by: Sedat Dilek Tested-by: Sedat Dilek Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller --- drivers/net/ppp/ppp_generic.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c index 0481daf9201a..ed00446759b2 100644 --- a/drivers/net/ppp/ppp_generic.c +++ b/drivers/net/ppp/ppp_generic.c @@ -2755,6 +2755,7 @@ static struct ppp *ppp_create_interface(struct net *net, int unit, */ dev_net_set(dev, net); + rtnl_lock(); mutex_lock(&pn->all_ppp_mutex); if (unit < 0) { @@ -2785,7 +2786,7 @@ static struct ppp *ppp_create_interface(struct net *net, int unit, ppp->file.index = unit; sprintf(dev->name, "ppp%d", unit); - ret = register_netdev(dev); + ret = register_netdevice(dev); if (ret != 0) { unit_put(&pn->units_idr, unit); netdev_err(ppp->dev, "PPP: couldn't register device %s (%d)\n", @@ -2797,6 +2798,7 @@ static struct ppp *ppp_create_interface(struct net *net, int unit, atomic_inc(&ppp_unit_count); mutex_unlock(&pn->all_ppp_mutex); + rtnl_unlock(); *retp = 0; return ppp; -- cgit v1.2.3 From 59f069789c98678710ed30a4be0daa3546ec82c7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 25 Sep 2015 11:56:56 +0100 Subject: net: update docbook comment for __mdiobus_register() Update the docbook comment for __mdiobus_register() to include the new module owner argument. This resolves a warning found by the 0-day builder. Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/mdio_bus.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index c340e412b38f..12f44c53cc8e 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -236,11 +236,14 @@ static inline void of_mdiobus_link_phydev(struct mii_bus *mdio, #endif /** - * mdiobus_register - bring up all the PHYs on a given bus and attach them to bus + * __mdiobus_register - bring up all the PHYs on a given bus and attach them to bus * @bus: target mii_bus + * @owner: module containing bus accessor functions * * Description: Called by a bus driver to bring up all the PHYs - * on a given bus, and attach them to the bus. + * on a given bus, and attach them to the bus. Drivers should use + * mdiobus_register() rather than __mdiobus_register() unless they + * need to pass a specific owner module. * * Returns 0 on success or < 0 on error. */ -- cgit v1.2.3