1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/nxp,imx8mq-mipi-csi2.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NXP i.MX8MQ MIPI CSI-2 receiver
maintainers:
- Martin Kepplinger <martin.kepplinger@puri.sm>
description: |-
This binding covers the CSI-2 RX PHY and host controller included in the
NXP i.MX8MQ SoC. It handles the sensor/image input and process for all the
input imaging devices.
properties:
compatible:
enum:
- fsl,imx8mq-mipi-csi2
reg:
maxItems: 1
clocks:
items:
- description: core is the RX Controller Core Clock input. This clock
must be exactly equal to or faster than the receive
byteclock from the RX DPHY.
- description: esc is the Rx Escape Clock. This must be the same escape
clock that the RX DPHY receives.
- description: ui is the pixel clock (phy_ref up to 333Mhz).
See the reference manual for details.
clock-names:
items:
- const: core
- const: esc
- const: ui
power-domains:
maxItems: 1
resets:
items:
- description: CORE_RESET reset register bit definition
- description: PHY_REF_RESET reset register bit definition
- description: ESC_RESET reset register bit definition
fsl,mipi-phy-gpr:
description: |
The phandle to the imx8mq syscon iomux-gpr with the register
for setting RX_ENABLE for the mipi receiver.
The format should be as follows:
<gpr req_gpr>
gpr is the phandle to general purpose register node.
req_gpr is the gpr register offset of RX_ENABLE for the mipi phy.
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
items:
- description: The 'gpr' is the phandle to general purpose register node.
- description: The 'req_gpr' is the gpr register offset containing
CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively.
maximum: 0xff
interconnects:
maxItems: 1
interconnect-names:
const: dram
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description:
Input port node, single endpoint describing the CSI-2 transmitter.
properties:
endpoint:
$ref: video-interfaces.yaml#
unevaluatedProperties: false
properties:
data-lanes:
items:
minItems: 1
maxItems: 4
items:
- const: 1
- const: 2
- const: 3
- const: 4
required:
- data-lanes
port@1:
$ref: /schemas/graph.yaml#/properties/port
description:
Output port node
required:
- port@0
- port@1
required:
- compatible
- reg
- clocks
- clock-names
- power-domains
- resets
- fsl,mipi-phy-gpr
- ports
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/imx8mq-clock.h>
#include <dt-bindings/interconnect/imx8mq.h>
#include <dt-bindings/reset/imx8mq-reset.h>
csi@30a70000 {
compatible = "fsl,imx8mq-mipi-csi2";
reg = <0x30a70000 0x1000>;
clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
<&clk IMX8MQ_CLK_CSI1_ESC>,
<&clk IMX8MQ_CLK_CSI1_PHY_REF>;
clock-names = "core", "esc", "ui";
assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
<&clk IMX8MQ_CLK_CSI1_PHY_REF>,
<&clk IMX8MQ_CLK_CSI1_ESC>;
assigned-clock-rates = <266000000>, <200000000>, <66000000>;
assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
<&clk IMX8MQ_SYS2_PLL_1000M>,
<&clk IMX8MQ_SYS1_PLL_800M>;
power-domains = <&pgc_mipi_csi1>;
resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>,
<&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>,
<&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>;
fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>;
interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
interconnect-names = "dram";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
imx8mm_mipi_csi_in: endpoint {
remote-endpoint = <&imx477_out>;
data-lanes = <1 2 3 4>;
};
};
port@1 {
reg = <1>;
imx8mm_mipi_csi_out: endpoint {
remote-endpoint = <&csi_in>;
};
};
};
};
...
|
