Merge with /home/sr/git/u-boot/denx

5 files changed, 517 insertions, 33 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 46e77e7c462..02ccd30a3e7 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,21 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* PCIe endpoint support for AMCC Yucca 440SPe board
+  Patch by Tirumala R Marri, 26 Aug 2006
+
+* Improve DIMM detection for AMCC Yucca 440SPe board
+  Improved the memory DIMM detection for the Yucca 440SPe board for
+  the case where a memory DIMM is falsely detected as present.
+  This issue is seen on some AMCC Yucca 440SPe validation boards if
+  only one 512MB memory DIMM is installed, i.e. DIMM slot 0 is
+  populated and DIMM slot 1 is empty.  In this case, U-Boot does
+  not correctly detect that there is only one DIMM memory module
+  installed and will falsely detect two DIMM memory modules are
+  present and therefore U-Boot will not calculate the correct amount
+  of total memory and u-boot will not booting up.
+  Patch by Adam Graham, 24 Aug 2006
+
 * Fix typo.
 
 * Code cleanup
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index af12839c2c3..cd175265f0d 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -32,6 +32,10 @@
 #include <asm-ppc/io.h>
 
 #include "yucca.h"
+#include "../cpu/ppc4xx/440spe_pcie.h"
+
+#undef PCIE_ENDPOINT
+/* #define PCIE_ENDPOINT 1 */
 
 void fpga_init (void);
 
@@ -562,10 +566,11 @@ int checkboard (void)
 
 static long int yucca_probe_for_dimms(void)
 {
-	long int 	dimm_installed[MAXDIMMS];
-	long int	dimm_num, probe_result;
-	long int	dimms_found = 0;
-	uchar		dimm_addr = IIC0_DIMM0_ADDR;
+	int 	dimm_installed[MAXDIMMS];
+	int	dimm_num, result;
+	int	dimms_found = 0;
+	uchar	dimm_addr = IIC0_DIMM0_ADDR;
+	uchar   dimm_spd_data[MAX_SPD_BYTES];
 
 	for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
 		/* check if there is a chip at the dimm address	*/
@@ -577,12 +582,28 @@ static long int yucca_probe_for_dimms(void)
 				dimm_addr = IIC0_DIMM1_ADDR;
 				break;
 		}
-		probe_result = i2c_probe(dimm_addr);
 
-		if (probe_result == 0) {
+		result = i2c_probe(dimm_addr);
+
+		memset(dimm_spd_data, 0, MAX_SPD_BYTES * sizeof(char));
+		if (result == 0) {
+			/* read first byte of SPD data, if there is any data */
+			result = i2c_read(dimm_addr, 0, 1, dimm_spd_data, 1);
+
+			if (result == 0) {
+				result = dimm_spd_data[0];
+				result = result > MAX_SPD_BYTES ?
+						MAX_SPD_BYTES : result;
+				result = i2c_read(dimm_addr, 0, 1,
+							dimm_spd_data, result);
+			}
+		}
+
+		if ((result == 0) &&
+		    (dimm_spd_data[64] == MICRON_SPD_JEDEC_ID)) {
 			dimm_installed[dimm_num] = TRUE;
 			dimms_found++;
-			debug("DIMM slot %d: DDR2 SDRAM detected\n",dimm_num);
+			debug("DIMM slot %d: DDR2 SDRAM detected\n", dimm_num);
 		} else {
 			dimm_installed[dimm_num] = FALSE;
 			debug("DIMM slot %d: Not populated or cannot sucessfully probe the DIMM\n", dimm_num);
@@ -1012,6 +1033,57 @@ void yucca_setup_pcie_fpga_rootpoint(int port)
 
 	out_be16((u16 *)FPGA_REG1C, reset_off | in_be16((u16 *)FPGA_REG1C));
 }
+/*
+ * For the given slot, set endpoint mode, send power to the slot,
+ * turn on the green LED and turn off the yellow LED, enable the clock
+ * .In end point mode reset bit is  read only.
+ */
+void yucca_setup_pcie_fpga_endpoint(int port)
+{
+	u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint;
+
+	switch(port) {
+	case 0:
+		rootpoint   = FPGA_REG1C_PE0_ROOTPOINT;
+		endpoint    = 0;
+		power 	    = FPGA_REG1A_PE0_PWRON;
+		green_led   = FPGA_REG1A_PE0_GLED;
+		clock 	    = FPGA_REG1A_PE0_REFCLK_ENABLE;
+		yellow_led  = FPGA_REG1A_PE0_YLED;
+		reset_off   = FPGA_REG1C_PE0_PERST;
+		break;
+	case 1:
+		rootpoint   = 0;
+		endpoint    = FPGA_REG1C_PE1_ENDPOINT;
+		power 	    = FPGA_REG1A_PE1_PWRON;
+		green_led   = FPGA_REG1A_PE1_GLED;
+		clock 	    = FPGA_REG1A_PE1_REFCLK_ENABLE;
+		yellow_led  = FPGA_REG1A_PE1_YLED;
+		reset_off   = FPGA_REG1C_PE1_PERST;
+		break;
+	case 2:
+		rootpoint   = 0;
+		endpoint    = FPGA_REG1C_PE2_ENDPOINT;
+		power 	    = FPGA_REG1A_PE2_PWRON;
+		green_led   = FPGA_REG1A_PE2_GLED;
+		clock 	    = FPGA_REG1A_PE2_REFCLK_ENABLE;
+		yellow_led  = FPGA_REG1A_PE2_YLED;
+		reset_off   = FPGA_REG1C_PE2_PERST;
+		break;
+
+	default:
+		return;
+	}
+
+	out_be16((u16 *)FPGA_REG1A,
+		 ~(power | clock | green_led) &
+		 (yellow_led | in_be16((u16 *)FPGA_REG1A)));
+
+	out_be16((u16 *)FPGA_REG1C,
+		 ~(rootpoint | reset_off) &
+		 (endpoint | in_be16((u16 *)FPGA_REG1C)));
+}
+
 
 
 static struct pci_controller pcie_hose[3] = {{0},{0},{0}};
@@ -1031,9 +1103,13 @@ void pcie_setup_hoses(void)
 		if (!yucca_pcie_card_present(i))
 			continue;
 
+#ifdef PCIE_ENDPOINT
+ 		yucca_setup_pcie_fpga_endpoint(i);
+ 		if (ppc440spe_init_pcie_endport(i)) {
+#else
 		yucca_setup_pcie_fpga_rootpoint(i);
-
 		if (ppc440spe_init_pcie_rootport(i)) {
+#endif
 			printf("PCIE%d: initialization failed\n", i);
 			continue;
 		}
@@ -1053,8 +1129,19 @@ void pcie_setup_hoses(void)
 		hose->region_count = 1;
 		pci_register_hose(hose);
 
-		ppc440spe_setup_pcie(hose, i);
+#ifdef PCIE_ENDPOINT
+		ppc440spe_setup_pcie_endpoint(hose, i);
+		/*
+		 * Reson for no scanning is endpoint can not generate
+		 * upstream configuration accesses.
+		 */
+#else
+		ppc440spe_setup_pcie_rootpoint(hose, i);
+		/*
+		 * Config access can only go down stream
+		 */
 		hose->last_busno = pci_hose_scan(hose);
+#endif
 	}
 }
 #endif	/* defined(CONFIG_PCI) */
diff --git a/board/amcc/yucca/yucca.h b/board/amcc/yucca/yucca.h
index 66f75847d35..4d13021f38f 100644
--- a/board/amcc/yucca/yucca.h
+++ b/board/amcc/yucca/yucca.h
@@ -60,6 +60,9 @@ extern "C" {
 
 #define NUM_TLB_ENTRIES          64
 
+/* MICRON SPD JEDEC ID Code (first byte) - SPD data byte [64] */
+#define MICRON_SPD_JEDEC_ID 0x2c
+
 /*----------------------------------------------------------------------------+
 | TLB specific defines.
 +----------------------------------------------------------------------------*/
diff --git a/cpu/ppc4xx/440spe_pcie.c b/cpu/ppc4xx/440spe_pcie.c
index b2621c2ec5b..6130cd28396 100644
--- a/cpu/ppc4xx/440spe_pcie.c
+++ b/cpu/ppc4xx/440spe_pcie.c
@@ -270,7 +270,7 @@ int ppc440spe_init_pcie(void)
 	SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24));
 	udelay(3);
 
-	while(time_out) {
+	while (time_out) {
 		if (!(SDR_READ(PESDR0_PLLLCT3) & 0x10000000)) {
 			time_out--;
 			udelay(1);
@@ -284,6 +284,40 @@ int ppc440spe_init_pcie(void)
 	return 0;
 }
 
+/*
+ *  Yucca board as End point and root point setup
+ *                    and
+ *    testing inbound and out bound windows
+ *
+ *  YUCCA board can be plugged into another yucca board or you can get PCI-E
+ *  cable which can be used to setup loop back from one port to another port.
+ *  Please rememeber that unless there is a endpoint plugged in to root port it
+ *  will not initialize. It is the same in case of endpoint , unless there is
+ *  root port attached it will not initialize.
+ *
+ *  In this release of software all the PCI-E ports are configured as either
+ *  endpoint or rootpoint.In future we will have support for selective ports
+ *  setup as endpoint and root point in single board.
+ *
+ *  Once your board came up as root point , you can verify by reading
+ *  /proc/bus/pci/devices. Where you can see the configuration registers
+ *  of end point device attached to the port.
+ *
+ *  Enpoint cofiguration can be verified by connecting Yucca board to any
+ *  host or another yucca board. Then try to scan the device. In case of
+ *  linux use "lspci" or appripriate os command.
+ *
+ *  How do I verify the inbound and out bound windows ?(yucca to yucca)
+ *  in this configuration inbound and outbound windows are setup to access
+ *  sram memroy area. SRAM is at 0x4 0000 0000 , on PLB bus. This address
+ *  is mapped at 0x90000000. From u-boot prompt write data 0xb000 0000,
+ *  This is waere your POM(PLB out bound memory window) mapped. then
+ *  read the data from other yucca board's u-boot prompt at address
+ *  0x9000 0000(SRAM). Data should match.
+ *  In case of inbound , write data to u-boot command prompt at 0xb000 0000
+ *  which is mapped to 0x4 0000 0000. Now on rootpoint yucca u-boot prompt check
+ *  data at 0x9000 0000(SRAM).Data should match.
+ */
 int ppc440spe_init_pcie_rootport(int port)
 {
 	static int core_init;
@@ -326,7 +360,7 @@ int ppc440spe_init_pcie_rootport(int port)
 		SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
 		SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
 		SDR_WRITE(PESDR0_RCSSET,
-			(SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+			  (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
 		break;
 
 	case 1:
@@ -339,7 +373,7 @@ int ppc440spe_init_pcie_rootport(int port)
 		SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000);
 		SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000);
 		SDR_WRITE(PESDR1_RCSSET,
-			(SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+			  (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
 		break;
 
 	case 2:
@@ -352,6 +386,225 @@ int ppc440spe_init_pcie_rootport(int port)
 		SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000);
 		SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000);
 		SDR_WRITE(PESDR2_RCSSET,
+			  (SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+		break;
+	}
+	/*
+	 * Notice: the following delay has critical impact on device
+	 * initialization - if too short (<50ms) the link doesn't get up.
+	 */
+	mdelay(100);
+
+	switch (port) {
+	case 0:
+		val = SDR_READ(PESDR0_RCSSTS);
+		break;
+	case 1:
+		val = SDR_READ(PESDR1_RCSSTS);
+		break;
+	case 2:
+		val = SDR_READ(PESDR2_RCSSTS);
+		break;
+	}
+
+	if (val & (1 << 20)) {
+		printf("PCIE%d: PGRST failed %08x\n", port, val);
+		return -1;
+	}
+
+	/*
+	 * Verify link is up
+	 */
+	val = 0;
+	switch (port) {
+	case 0:
+		val = SDR_READ(PESDR0_LOOP);
+		break;
+	case 1:
+		val = SDR_READ(PESDR1_LOOP);
+		break;
+	case 2:
+		val = SDR_READ(PESDR2_LOOP);
+		break;
+	}
+	if (!(val & 0x00001000)) {
+		printf("PCIE%d: link is not up.\n", port);
+		return -1;
+	}
+
+	/*
+	 * Setup UTL registers - but only on revA!
+	 * We use default settings for revB chip.
+	 */
+	if (!ppc440spe_revB())
+		ppc440spe_setup_utl(port);
+
+	/*
+	 * We map PCI Express configuration access into the 512MB regions
+	 *
+	 * NOTICE: revB is very strict about PLB real addressess and ranges to
+	 * be mapped for config space; it seems to only work with d_nnnn_nnnn
+	 * range (hangs the core upon config transaction attempts when set
+	 * otherwise) while revA uses c_nnnn_nnnn.
+	 *
+	 * For revA:
+	 *     PCIE0: 0xc_4000_0000
+	 *     PCIE1: 0xc_8000_0000
+	 *     PCIE2: 0xc_c000_0000
+	 *
+	 * For revB:
+	 *     PCIE0: 0xd_0000_0000
+	 *     PCIE1: 0xd_2000_0000
+	 *     PCIE2: 0xd_4000_0000
+	 */
+
+	switch (port) {
+	case 0:
+		if (ppc440spe_revB()) {
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000d);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x00000000);
+		} else {
+			/* revA */
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000);
+		}
+		mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
+		break;
+
+	case 1:
+		if (ppc440spe_revB()) {
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000d);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x20000000);
+		} else {
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000);
+		}
+		mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
+		break;
+
+	case 2:
+		if (ppc440spe_revB()) {
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000d);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0x40000000);
+		} else {
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000);
+		}
+		mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
+		break;
+	}
+
+	/*
+	 * Check for VC0 active and assert RDY.
+	 */
+	attempts = 10;
+	switch (port) {
+	case 0:
+		while(!(SDR_READ(PESDR0_RCSSTS) & (1 << 16))) {
+			if (!(attempts--)) {
+				printf("PCIE0: VC0 not active\n");
+				return -1;
+			}
+			mdelay(1000);
+		}
+		SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20);
+		break;
+	case 1:
+		while(!(SDR_READ(PESDR1_RCSSTS) & (1 << 16))) {
+			if (!(attempts--)) {
+				printf("PCIE1: VC0 not active\n");
+				return -1;
+			}
+			mdelay(1000);
+		}
+
+		SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20);
+		break;
+	case 2:
+		while(!(SDR_READ(PESDR2_RCSSTS) & (1 << 16))) {
+			if (!(attempts--)) {
+				printf("PCIE2: VC0 not active\n");
+				return -1;
+			}
+			mdelay(1000);
+		}
+
+		SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20);
+		break;
+	}
+	mdelay(100);
+
+	return 0;
+}
+
+int ppc440spe_init_pcie_endport(int port)
+{
+	static int core_init;
+	volatile u32 val = 0;
+	int attempts;
+
+	if (!core_init) {
+		++core_init;
+		if (ppc440spe_init_pcie())
+			return -1;
+	}
+
+	/*
+	 * Initialize various parts of the PCI Express core for our port:
+	 *
+	 * - Set as a end port and enable max width
+	 *   (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
+	 * - Set up UTL configuration.
+	 * - Increase SERDES drive strength to levels suggested by AMCC.
+	 * - De-assert RSTPYN, RSTDL and RSTGU.
+	 *
+	 * NOTICE for revB chip: PESDRn_UTLSET2 is not set - we leave it with
+	 * default setting 0x11310000. The register has new fields,
+	 * PESDRn_UTLSET2[LKINE] in particular: clearing it leads to PCIE core
+	 * hang.
+	 */
+	switch (port) {
+	case 0:
+		SDR_WRITE(PESDR0_DLPSET,  1 << 24 | PTYPE_LEGACY_ENDPOINT << 20 | LNKW_X8 << 12);
+
+		SDR_WRITE(PESDR0_UTLSET1, 0x20222222);
+		if (!ppc440spe_revB())
+			SDR_WRITE(PESDR0_UTLSET2, 0x11000000);
+		SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
+		SDR_WRITE(PESDR0_RCSSET,
+			(SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+		break;
+
+	case 1:
+		SDR_WRITE(PESDR1_DLPSET, 1 << 24 | PTYPE_LEGACY_ENDPOINT << 20 | LNKW_X4 << 12);
+		SDR_WRITE(PESDR1_UTLSET1, 0x20222222);
+		if (!ppc440spe_revB())
+			SDR_WRITE(PESDR1_UTLSET2, 0x11000000);
+		SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000);
+		SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000);
+		SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000);
+		SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000);
+		SDR_WRITE(PESDR1_RCSSET,
+			(SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+		break;
+
+	case 2:
+		SDR_WRITE(PESDR2_DLPSET, 1 << 24 | PTYPE_LEGACY_ENDPOINT << 20 | LNKW_X4 << 12);
+		SDR_WRITE(PESDR2_UTLSET1, 0x20222222);
+		if (!ppc440spe_revB())
+			SDR_WRITE(PESDR2_UTLSET2, 0x11000000);
+		SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000);
+		SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000);
+		SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000);
+		SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000);
+		SDR_WRITE(PESDR2_RCSSET,
 			(SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
 		break;
 	}
@@ -418,7 +671,6 @@ int ppc440spe_init_pcie_rootport(int port)
 	 *     PCIE1: 0xd_2000_0000
 	 *     PCIE2: 0xd_4000_0000
 	 */
-
 	switch (port) {
 	case 0:
 		if (ppc440spe_revB()) {
@@ -498,29 +750,33 @@ int ppc440spe_init_pcie_rootport(int port)
 	return 0;
 }
 
-void ppc440spe_setup_pcie(struct pci_controller *hose, int port)
+void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port)
 {
 	volatile void *mbase = NULL;
+	volatile void *rmbase = NULL;
 
 	pci_set_ops(hose,
-			pcie_read_config_byte,
-			pcie_read_config_word,
-			pcie_read_config_dword,
-			pcie_write_config_byte,
-			pcie_write_config_word,
-			pcie_write_config_dword);
-
-	switch(port) {
+		    pcie_read_config_byte,
+		    pcie_read_config_word,
+		    pcie_read_config_dword,
+		    pcie_write_config_byte,
+		    pcie_write_config_word,
+		    pcie_write_config_dword);
+
+	switch (port) {
 	case 0:
 		mbase = (u32 *)CFG_PCIE0_XCFGBASE;
+		rmbase = (u32 *)CFG_PCIE0_CFGBASE;
 		hose->cfg_data = (u8 *)CFG_PCIE0_CFGBASE;
 		break;
 	case 1:
 		mbase = (u32 *)CFG_PCIE1_XCFGBASE;
+		rmbase = (u32 *)CFG_PCIE1_CFGBASE;
 		hose->cfg_data = (u8 *)CFG_PCIE1_CFGBASE;
 		break;
 	case 2:
 		mbase = (u32 *)CFG_PCIE2_XCFGBASE;
+		rmbase = (u32 *)CFG_PCIE2_CFGBASE;
 		hose->cfg_data = (u8 *)CFG_PCIE2_CFGBASE;
 		break;
 	}
@@ -528,14 +784,9 @@ void ppc440spe_setup_pcie(struct pci_controller *hose, int port)
 	/*
 	 * Set bus numbers on our root port
 	 */
-	if (ppc440spe_revB()) {
-		out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
-		out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
-		out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
-	} else {
-		out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
-		out_8((u8 *)mbase + PCI_SECONDARY_BUS, 0);
-	}
+	out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
+	out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
+	out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
 
 	/*
 	 * Set up outbound translation to hose->mem_space from PLB
@@ -544,8 +795,7 @@ void ppc440spe_setup_pcie(struct pci_controller *hose, int port)
 	 * subregions and to enable the outbound translation.
 	 */
 	out_le32(mbase + PECFG_POM0LAH, 0x00000000);
-	out_le32(mbase + PECFG_POM0LAL, (CFG_PCIE_MEMBASE +
-			port * CFG_PCIE_MEMSIZE));
+	out_le32(mbase + PECFG_POM0LAL, 0x00000000);
 
 	switch (port) {
 	case 0:
@@ -579,14 +829,134 @@ void ppc440spe_setup_pcie(struct pci_controller *hose, int port)
 	out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
 	out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc);
 	out_le32(mbase + PECFG_BAR0LMPA, 0);
+
+	out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
+	out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
 	out_le32(mbase + PECFG_PIM0LAL, 0);
 	out_le32(mbase + PECFG_PIM0LAH, 0);
+	out_le32(mbase + PECFG_PIM1LAL,  0x00000000);
+	out_le32(mbase + PECFG_PIM1LAH,  0x00000004);
+	out_le32(mbase + PECFG_PIMEN, 0x1);
+
+	/* Enable I/O, Mem, and Busmaster cycles */
+	out_le16((u16 *)(mbase + PCI_COMMAND),
+		 in_le16((u16 *)(mbase + PCI_COMMAND)) |
+		 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+	printf("PCIE:%d successfully set as rootpoint\n",port);
+}
+
+int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port)
+{
+	volatile void *mbase = NULL;
+	int attempts = 0;
+
+	pci_set_ops(hose,
+		    pcie_read_config_byte,
+		    pcie_read_config_word,
+		    pcie_read_config_dword,
+		    pcie_write_config_byte,
+		    pcie_write_config_word,
+		    pcie_write_config_dword);
+
+	switch (port) {
+	case 0:
+		mbase = (u32 *)CFG_PCIE0_XCFGBASE;
+		hose->cfg_data = (u8 *)CFG_PCIE0_CFGBASE;
+		break;
+	case 1:
+		mbase = (u32 *)CFG_PCIE1_XCFGBASE;
+		hose->cfg_data = (u8 *)CFG_PCIE1_CFGBASE;
+		break;
+	case 2:
+		mbase = (u32 *)CFG_PCIE2_XCFGBASE;
+		hose->cfg_data = (u8 *)CFG_PCIE2_CFGBASE;
+		break;
+	}
+
+	/*
+	 * Set up outbound translation to hose->mem_space from PLB
+	 * addresses at an offset of 0xd_0000_0000.  We set the low
+	 * bits of the mask to 11 to turn off splitting into 8
+	 * subregions and to enable the outbound translation.
+	 */
+	out_le32(mbase + PECFG_POM0LAH, 0x00001ff8);
+	out_le32(mbase + PECFG_POM0LAL, 0x00001000);
+
+	switch (port) {
+	case 0:
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0),  0x0000000d);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0),  CFG_PCIE_MEMBASE +
+			port * CFG_PCIE_MEMSIZE);
+		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
+		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
+			~(CFG_PCIE_MEMSIZE - 1) | 3);
+		break;
+	case 1:
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1),  0x0000000d);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1),  (CFG_PCIE_MEMBASE +
+			port * CFG_PCIE_MEMSIZE));
+		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
+		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
+			~(CFG_PCIE_MEMSIZE - 1) | 3);
+		break;
+	case 2:
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2),  0x0000000d);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2),  (CFG_PCIE_MEMBASE +
+			port * CFG_PCIE_MEMSIZE));
+		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
+		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
+			~(CFG_PCIE_MEMSIZE - 1) | 3);
+		break;
+	}
+
+	/* Set up 16GB inbound memory window at 0 */
+	out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
+	out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
+	out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc);
+	out_le32(mbase + PECFG_BAR0LMPA, 0);
+	out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
+	out_le32(mbase + PECFG_PIM0LAH, 0x00000004);	/* pointing to SRAM */
 	out_le32(mbase + PECFG_PIMEN, 0x1);
 
 	/* Enable I/O, Mem, and Busmaster cycles */
 	out_le16((u16 *)(mbase + PCI_COMMAND),
 		 in_le16((u16 *)(mbase + PCI_COMMAND)) |
 		 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+	out_le16(mbase + 0x200,0xcaad);			/* Setting vendor ID */
+	out_le16(mbase + 0x202,0xfeed);			/* Setting device ID */
+	attempts = 10;
+	switch (port) {
+	case 0:
+		while (!(SDR_READ(PESDR0_RCSSTS) & (1 << 8))) {
+			if (!(attempts--)) {
+				printf("PCIE0: BMEN is  not active\n");
+				return -1;
+			}
+			mdelay(1000);
+		}
+		break;
+	case 1:
+		while (!(SDR_READ(PESDR1_RCSSTS) & (1 << 8))) {
+			if (!(attempts--)) {
+				printf("PCIE1: BMEN is not active\n");
+				return -1;
+			}
+			mdelay(1000);
+		}
+		break;
+	case 2:
+		while (!(SDR_READ(PESDR2_RCSSTS) & (1 << 8))) {
+			if (!(attempts--)) {
+				printf("PCIE2: BMEN is  not active\n");
+				return -1;
+			}
+			mdelay(1000);
+		}
+		break;
+	}
+	printf("PCIE:%d successfully set as endpoint\n",port);
+
+	return 0;
 }
 #endif /* CONFIG_PCI */
 #endif /* CONFIG_440SPE */
diff --git a/cpu/ppc4xx/440spe_pcie.h b/cpu/ppc4xx/440spe_pcie.h
index 47df7620a6d..2becc777222 100644
--- a/cpu/ppc4xx/440spe_pcie.h
+++ b/cpu/ppc4xx/440spe_pcie.h
@@ -139,9 +139,17 @@
  */
 #define PECFG_BAR0LMPA		0x210
 #define PECFG_BAR0HMPA		0x214
+#define PECFG_BAR1MPA		0x218
+#define PECFG_BAR2MPA		0x220
+
 #define PECFG_PIMEN		0x33c
 #define PECFG_PIM0LAL		0x340
 #define PECFG_PIM0LAH		0x344
+#define PECFG_PIM1LAL     	0x348
+#define PECFG_PIM1LAH     	0x34c
+#define PECFG_PIM01SAL		0x350
+#define PECFG_PIM01SAH		0x354
+
 #define PECFG_POM0LAL		0x380
 #define PECFG_POM0LAH		0x384
 
@@ -156,7 +164,8 @@
 int ppc440spe_init_pcie(void);
 int ppc440spe_init_pcie_rootport(int port);
 void yucca_setup_pcie_fpga_rootpoint(int port);
-void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
+void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port);
+int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port);
 int yucca_pcie_card_present(int port);
 int pcie_hose_scan(struct pci_controller *hose, int bus);
 #endif /* __440SPE_PCIE_H */