phy: rockchip-inno-usb2: Write to correct GRF

On RK3399 the USB2PHY regs are located in the common GRF, remaining SoCs
that is supported by this driver have the USB2PHY regs in a different
GRF.

When support for RK356x, RK3588 and RK3328 was added this driver was
never updated to use correct GRF and have instead incorrectly written
to wrong GRF for these SoCs.

The default reset values for the USB2PHY have made USB mostly working
even when wrong GRF was used, however, following have been observed:

  scanning bus usb@fd840000 for devices...
  ERROR:  USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did
  not provide a handshake (OUT) (5)
  ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token (IN) or did
  not provide a handshake (OUT) (5)
  unable to get device descriptor (error=-1)

Fix this by using a regmap from rockchip,usbgrf prop and fall back to
getting a regmap for parent udevice instead of always getting the
common GRF.

Also protect against accidental clear of bit 0 in a reg with offset 0,
only bind driver to enabled otg/host-ports and remove unused headers.

Fixes: 3da15f0b49a2 ("phy: rockchip-inno-usb2: Add USB2 PHY for rk3568")
Fixes: cdf9010f6e17 ("phy: rockchip-inno-usb2: add initial support for rk3588 PHY")
Fixes: 9aa93d84038b ("phy: rockchip-inno-usb2: Add USB2 PHY for RK3328")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

1 files changed, 22 insertions, 19 deletions

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 70e61eccb79..7317128d135 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -6,23 +6,16 @@
  * Copyright (C) 2020 Amarula Solutions(India)
  */
 
-#include <common.h>
 #include <clk-uclass.h>
 #include <dm.h>
-#include <asm/global_data.h>
 #include <dm/device_compat.h>
 #include <dm/device-internal.h>
 #include <dm/lists.h>
 #include <generic-phy.h>
-#include <reset.h>
+#include <regmap.h>
 #include <syscon.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <linux/iopoll.h>
 #include <asm/arch-rockchip/clock.h>
 
-DECLARE_GLOBAL_DATA_PTR;
-
 #define usleep_range(a, b) udelay((b))
 #define BIT_WRITEABLE_SHIFT	16
 
@@ -61,30 +54,39 @@ struct rockchip_usb2phy_cfg {
 };
 
 struct rockchip_usb2phy {
-	void *reg_base;
+	struct regmap *reg_base;
 	struct clk phyclk;
 	const struct rockchip_usb2phy_cfg *phy_cfg;
 };
 
-static inline int property_enable(void *reg_base,
+static inline int property_enable(struct regmap *base,
 				  const struct usb2phy_reg *reg, bool en)
 {
 	unsigned int val, mask, tmp;
 
+	if (!reg->offset && !reg->enable && !reg->disable)
+		return 0;
+
 	tmp = en ? reg->enable : reg->disable;
 	mask = GENMASK(reg->bitend, reg->bitstart);
 	val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT);
 
-	return writel(val, reg_base + reg->offset);
+	return regmap_write(base, reg->offset, val);
 }
 
-static inline bool property_enabled(void *reg_base,
+static inline bool property_enabled(struct regmap *base,
 				    const struct usb2phy_reg *reg)
 {
+	int ret;
 	unsigned int tmp, orig;
 	unsigned int mask = GENMASK(reg->bitend, reg->bitstart);
 
-	orig = readl(reg_base + reg->offset);
+	if (!reg->offset && !reg->enable && !reg->disable)
+		return false;
+
+	ret = regmap_read(base, reg->offset, &orig);
+	if (ret)
+		return false;
 
 	tmp = (orig & mask) >> reg->bitstart;
 	return tmp != reg->disable;
@@ -248,7 +250,11 @@ static int rockchip_usb2phy_probe(struct udevice *dev)
 	unsigned int reg;
 	int index, ret;
 
-	priv->reg_base = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+	if (dev_read_bool(dev, "rockchip,usbgrf"))
+		priv->reg_base =
+			syscon_regmap_lookup_by_phandle(dev, "rockchip,usbgrf");
+	else
+		priv->reg_base = syscon_get_regmap(dev_get_parent(dev));
 	if (IS_ERR(priv->reg_base))
 		return PTR_ERR(priv->reg_base);
 
@@ -305,11 +311,8 @@ static int rockchip_usb2phy_bind(struct udevice *dev)
 	int ret = 0;
 
 	dev_for_each_subnode(node, dev) {
-		if (!ofnode_valid(node)) {
-			dev_info(dev, "subnode %s not found\n", dev->name);
-			ret = -ENXIO;
-			goto bind_fail;
-		}
+		if (!ofnode_is_enabled(node))
+			continue;
 
 		name = ofnode_get_name(node);
 		dev_dbg(dev, "subnode %s\n", name);