diff options
| author | Anton Staaf | 2011-06-30 09:55:08 +0000 |
|---|---|---|
| committer | Albert ARIBAUD | 2011-09-03 22:40:47 +0200 |
| commit | 9070872bb343e07945bf3882c572da82901c637d (patch) | |
| tree | 35a777748213c0f01eecac00b6b5a4d809d4df50 | |
| parent | 34d34b88b6b3d947de86dae81574bdde85b8d01e (diff) | |
mmc: S5P: Support DMA restarts at buffer boundaries
Currently if a DMA buffer straddles a buffer alignment boundary
(512KiB) then the DMA engine will pause and generate a DMA
interrupt. Since the DMA interrupt is not enabled it will hang
the MMC driver.
This patch adds support for restarting the DMA transfer. The
SYSTEM_ADDRESS register contains the next address that would have
been read/written when a boundary is hit. So we can read that
and write it back. The write triggers the resumption of the
transfer.
Signed-off-by: Anton Staaf <robotboy@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Tested-by : Jaehoon Chung <jh80.chung@samsung.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
| -rw-r--r-- | drivers/mmc/s5p_mmc.c | 15 |
1 files changed, 11 insertions, 4 deletions
diff --git a/drivers/mmc/s5p_mmc.c b/drivers/mmc/s5p_mmc.c index f1368132a3b..7786ecf2be8 100644 --- a/drivers/mmc/s5p_mmc.c +++ b/drivers/mmc/s5p_mmc.c @@ -232,9 +232,15 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, __func__, mask); return -1; } else if (mask & (1 << 3)) { - /* DMA Interrupt */ + /* + * DMA Interrupt, restart the transfer where + * it was interrupted. + */ + unsigned int address = readl(&host->reg->sysad); + debug("DMA end\n"); - break; + writel((1 << 3), &host->reg->norintsts); + writel(address, &host->reg->sysad); } else if (mask & (1 << 1)) { /* Transfer Complete */ debug("r/w is done\n"); @@ -425,12 +431,13 @@ static int mmc_core_init(struct mmc *mmc) * NORMAL Interrupt Status Enable Register init * [5] ENSTABUFRDRDY : Buffer Read Ready Status Enable * [4] ENSTABUFWTRDY : Buffer write Ready Status Enable + * [3] ENSTADMAINT : DMA Interrupt Status Enable * [1] ENSTASTANSCMPLT : Transfre Complete Status Enable * [0] ENSTACMDCMPLT : Command Complete Status Enable - */ + */ mask = readl(&host->reg->norintstsen); mask &= ~(0xffff); - mask |= (1 << 5) | (1 << 4) | (1 << 1) | (1 << 0); + mask |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 1) | (1 << 0); writel(mask, &host->reg->norintstsen); /* |