arm: ti814x: Remove remaining support code

When the ti814x_evm config was removed most, but not all, of the
relevant support code was remove.  Get rid of what was missed.

Fixes: 50b532686849 ("ti814x: Remove platform")
Signed-off-by: Tom Rini <trini@konsulko.com>

18 files changed, 12 insertions, 983 deletions

diff --git a/arch/arm/include/asm/arch-am33xx/clock.h b/arch/arm/include/asm/arch-am33xx/clock.h
index 79e3b8c7d9f..ad25b3e8aa0 100644
--- a/arch/arm/include/asm/arch-am33xx/clock.h
+++ b/arch/arm/include/asm/arch-am33xx/clock.h
@@ -13,7 +13,7 @@
 #include <asm/arch/clocks_am33xx.h>
 #include <asm/arch/hardware.h>
 
-#if defined(CONFIG_TI816X) || defined(CONFIG_TI814X)
+#if defined(CONFIG_TI816X)
 #include <asm/arch/clock_ti81xx.h>
 #endif
 
diff --git a/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h b/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h
index f0699229a33..d22d9587063 100644
--- a/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h
+++ b/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h
@@ -44,9 +44,7 @@ struct cm_alwon {
 	unsigned int mmu_clkstctrl;
 	unsigned int mmucfg_clkstctrl;
 	unsigned int ocmc0clkstctrl;
-#if defined(CONFIG_TI814X)
-	unsigned int vcpclkstctrl;
-#elif defined(CONFIG_TI816X)
+#if defined(CONFIG_TI816X)
 	unsigned int ocmc1clkstctrl;
 #endif
 	unsigned int mpuclkstctrl;
@@ -67,16 +65,7 @@ struct cm_alwon {
 	unsigned int gpio1clkctrl;
 	unsigned int i2c0clkctrl;
 	unsigned int i2c1clkctrl;
-#if defined(CONFIG_TI814X)
-	unsigned int mcasp345clkctrl;
-	unsigned int atlclkctrl;
-	unsigned int mlbclkctrl;
-	unsigned int pataclkctrl;
-	unsigned int resv1[1];
-	unsigned int uart3clkctrl;
-	unsigned int uart4clkctrl;
-	unsigned int uart5clkctrl;
-#elif defined(CONFIG_TI816X)
+#if defined(CONFIG_TI816X)
 	unsigned int resv1[1];
 	unsigned int timer1clkctrl;
 	unsigned int timer2clkctrl;
@@ -93,16 +82,12 @@ struct cm_alwon {
 	unsigned int mmudataclkctrl;
 	unsigned int resv2[2];
 	unsigned int mmucfgclkctrl;
-#if defined(CONFIG_TI814X)
-	unsigned int resv3[2];
-#elif defined(CONFIG_TI816X)
+#if defined(CONFIG_TI816X)
 	unsigned int resv3[1];
 	unsigned int sdioclkctrl;
 #endif
 	unsigned int ocmc0clkctrl;
-#if defined(CONFIG_TI814X)
-	unsigned int vcpclkctrl;
-#elif defined(CONFIG_TI816X)
+#if defined(CONFIG_TI816X)
 	unsigned int ocmc1clkctrl;
 #endif
 	unsigned int resv4[2];
@@ -112,9 +97,7 @@ struct cm_alwon {
 	unsigned int ethernet0clkctrl;
 	unsigned int ethernet1clkctrl;
 	unsigned int mpuclkctrl;
-#if defined(CONFIG_TI814X)
-	unsigned int debugssclkctrl;
-#elif defined(CONFIG_TI816X)
+#if defined(CONFIG_TI816X)
 	unsigned int resv6[1];
 #endif
 	unsigned int l3clkctrl;
@@ -126,14 +109,7 @@ struct cm_alwon {
 	unsigned int tptc1clkctrl;
 	unsigned int tptc2clkctrl;
 	unsigned int tptc3clkctrl;
-#if defined(CONFIG_TI814X)
-	unsigned int resv6[4];
-	unsigned int dcan01clkctrl;
-	unsigned int mmchs0clkctrl;
-	unsigned int mmchs1clkctrl;
-	unsigned int mmchs2clkctrl;
-	unsigned int custefuseclkctrl;
-#elif defined(CONFIG_TI816X)
+#if defined(CONFIG_TI816X)
 	unsigned int sr0clkctrl;
 	unsigned int sr1clkctrl;
 #endif
diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h
index 0508b8c912a..2d7f9da3652 100644
--- a/arch/arm/include/asm/arch-am33xx/hardware.h
+++ b/arch/arm/include/asm/arch-am33xx/hardware.h
@@ -16,8 +16,6 @@
 #include <asm/arch/hardware_am33xx.h>
 #elif defined(CONFIG_TI816X)
 #include <asm/arch/hardware_ti816x.h>
-#elif defined(CONFIG_TI814X)
-#include <asm/arch/hardware_ti814x.h>
 #elif defined(CONFIG_AM43XX)
 #include <asm/arch/hardware_am43xx.h>
 #endif
diff --git a/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h b/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h
deleted file mode 100644
index b00d592bc31..00000000000
--- a/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * hardware_ti814x.h
- *
- * TI814x hardware specific header
- *
- * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
- */
-
-#ifndef __AM33XX_HARDWARE_TI814X_H
-#define __AM33XX_HARDWARE_TI814X_H
-
-/* Module base addresses */
-
-/* UART Base Address */
-#define UART0_BASE			0x48020000
-
-/* Watchdog Timer */
-#define WDT_BASE			0x481C7000
-
-/* Control Module Base Address */
-#define CTRL_BASE			0x48140000
-#define CTRL_DEVICE_BASE		0x48140600
-
-/* PRCM Base Address */
-#define PRCM_BASE			0x48180000
-#define CM_PER				0x44E00000
-#define CM_WKUP				0x44E00400
-
-#define PRM_RSTCTRL			(PRCM_BASE + 0x00A0)
-#define PRM_RSTST			(PRM_RSTCTRL + 8)
-
-/* PLL Subsystem Base Address */
-#define PLL_SUBSYS_BASE			0x481C5000
-
-/* VTP Base address */
-#define VTP0_CTRL_ADDR			0x48140E0C
-#define VTP1_CTRL_ADDR			0x48140E10
-
-/* DDR Base address */
-#define DDR_PHY_CMD_ADDR		0x47C0C400
-#define DDR_PHY_DATA_ADDR		0x47C0C4C8
-#define DDR_PHY_CMD_ADDR2		0x47C0C800
-#define DDR_PHY_DATA_ADDR2		0x47C0C8C8
-#define DDR_DATA_REGS_NR		4
-
-#define DDRPHY_0_CONFIG_BASE		(CTRL_BASE + 0x1400)
-#define DDRPHY_CONFIG_BASE		DDRPHY_0_CONFIG_BASE
-
-/* CPSW Config space */
-#define CPSW_MDIO_BASE			0x4A100800
-
-/* RTC base address */
-#define RTC_BASE			0x480C0000
-
-/* OTG */
-#define USB0_OTG_BASE			0x47401000
-#define USB1_OTG_BASE			0x47401800
-
-#endif /* __AM33XX_HARDWARE_TI814X_H */
diff --git a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h
index 5a2ea8faefd..ed15d15c5b3 100644
--- a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h
+++ b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h
@@ -24,10 +24,7 @@
 #define OMAP_HSMMC1_BASE		0x48060000
 #define OMAP_HSMMC2_BASE		0x481D8000
 
-#if defined(CONFIG_TI814X)
-#undef MMC_CLOCK_REFERENCE
-#define MMC_CLOCK_REFERENCE	192 /* MHz */
-#elif defined(CONFIG_TI816X)
+#if defined(CONFIG_TI816X)
 #undef MMC_CLOCK_REFERENCE
 #define MMC_CLOCK_REFERENCE	48 /* MHz */
 #endif
diff --git a/arch/arm/include/asm/arch-am33xx/mux.h b/arch/arm/include/asm/arch-am33xx/mux.h
index b16b1847336..7cf973710d1 100644
--- a/arch/arm/include/asm/arch-am33xx/mux.h
+++ b/arch/arm/include/asm/arch-am33xx/mux.h
@@ -20,8 +20,6 @@
 
 #ifdef CONFIG_AM33XX
 #include <asm/arch/mux_am33xx.h>
-#elif defined(CONFIG_TI814X)
-#include <asm/arch/mux_ti814x.h>
 #elif defined(CONFIG_TI816X)
 #include <asm/arch/mux_ti816x.h>
 #elif defined(CONFIG_AM43XX)
diff --git a/arch/arm/include/asm/arch-am33xx/mux_ti814x.h b/arch/arm/include/asm/arch-am33xx/mux_ti814x.h
deleted file mode 100644
index a26e5038f71..00000000000
--- a/arch/arm/include/asm/arch-am33xx/mux_ti814x.h
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
- * mux_ti814x.h
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _MUX_TI814X_H_
-#define _MUX_TI814X_H_
-
-/* PAD Control Fields */
-#define PINCNTL_RSV_MSK	(0x3 << 18) /* Reserved bitmask */
-#define PULLUP_EN	(0x1 << 17) /* Pull UP Selection */
-#define PULLUDEN	(0x0 << 16) /* Pull up enabled */
-#define PULLUDDIS	(0x1 << 16) /* Pull up disabled */
-#define MODE(val)	val	/* used for Readability */
-
-#define MUX_CFG(value, offset)				\
-{							\
-	int tmp;					\
-	tmp = __raw_readl(CTRL_BASE + offset);		\
-	tmp &= PINCNTL_RSV_MSK;				\
-	__raw_writel(tmp | value, (CTRL_BASE + offset));\
-}
-
-/*
- * PAD CONTROL OFFSETS
- * Field names corresponds to the pad signal name
- */
-struct pad_signals {
-	int pincntl1;
-	int pincntl2;
-	int pincntl3;
-	int pincntl4;
-	int pincntl5;
-	int pincntl6;
-	int pincntl7;
-	int pincntl8;
-	int pincntl9;
-	int pincntl10;
-	int pincntl11;
-	int pincntl12;
-	int pincntl13;
-	int pincntl14;
-	int pincntl15;
-	int pincntl16;
-	int pincntl17;
-	int pincntl18;
-	int pincntl19;
-	int pincntl20;
-	int pincntl21;
-	int pincntl22;
-	int pincntl23;
-	int pincntl24;
-	int pincntl25;
-	int pincntl26;
-	int pincntl27;
-	int pincntl28;
-	int pincntl29;
-	int pincntl30;
-	int pincntl31;
-	int pincntl32;
-	int pincntl33;
-	int pincntl34;
-	int pincntl35;
-	int pincntl36;
-	int pincntl37;
-	int pincntl38;
-	int pincntl39;
-	int pincntl40;
-	int pincntl41;
-	int pincntl42;
-	int pincntl43;
-	int pincntl44;
-	int pincntl45;
-	int pincntl46;
-	int pincntl47;
-	int pincntl48;
-	int pincntl49;
-	int pincntl50;
-	int pincntl51;
-	int pincntl52;
-	int pincntl53;
-	int pincntl54;
-	int pincntl55;
-	int pincntl56;
-	int pincntl57;
-	int pincntl58;
-	int pincntl59;
-	int pincntl60;
-	int pincntl61;
-	int pincntl62;
-	int pincntl63;
-	int pincntl64;
-	int pincntl65;
-	int pincntl66;
-	int pincntl67;
-	int pincntl68;
-	int pincntl69;
-	int pincntl70;
-	int pincntl71;
-	int pincntl72;
-	int pincntl73;
-	int pincntl74;
-	int pincntl75;
-	int pincntl76;
-	int pincntl77;
-	int pincntl78;
-	int pincntl79;
-	int pincntl80;
-	int pincntl81;
-	int pincntl82;
-	int pincntl83;
-	int pincntl84;
-	int pincntl85;
-	int pincntl86;
-	int pincntl87;
-	int pincntl88;
-	int pincntl89;
-	int pincntl90;
-	int pincntl91;
-	int pincntl92;
-	int pincntl93;
-	int pincntl94;
-	int pincntl95;
-	int pincntl96;
-	int pincntl97;
-	int pincntl98;
-	int pincntl99;
-	int pincntl100;
-	int pincntl101;
-	int pincntl102;
-	int pincntl103;
-	int pincntl104;
-	int pincntl105;
-	int pincntl106;
-	int pincntl107;
-	int pincntl108;
-	int pincntl109;
-	int pincntl110;
-	int pincntl111;
-	int pincntl112;
-	int pincntl113;
-	int pincntl114;
-	int pincntl115;
-	int pincntl116;
-	int pincntl117;
-	int pincntl118;
-	int pincntl119;
-	int pincntl120;
-	int pincntl121;
-	int pincntl122;
-	int pincntl123;
-	int pincntl124;
-	int pincntl125;
-	int pincntl126;
-	int pincntl127;
-	int pincntl128;
-	int pincntl129;
-	int pincntl130;
-	int pincntl131;
-	int pincntl132;
-	int pincntl133;
-	int pincntl134;
-	int pincntl135;
-	int pincntl136;
-	int pincntl137;
-	int pincntl138;
-	int pincntl139;
-	int pincntl140;
-	int pincntl141;
-	int pincntl142;
-	int pincntl143;
-	int pincntl144;
-	int pincntl145;
-	int pincntl146;
-	int pincntl147;
-	int pincntl148;
-	int pincntl149;
-	int pincntl150;
-	int pincntl151;
-	int pincntl152;
-	int pincntl153;
-	int pincntl154;
-	int pincntl155;
-	int pincntl156;
-	int pincntl157;
-	int pincntl158;
-	int pincntl159;
-	int pincntl160;
-	int pincntl161;
-	int pincntl162;
-	int pincntl163;
-	int pincntl164;
-	int pincntl165;
-	int pincntl166;
-	int pincntl167;
-	int pincntl168;
-	int pincntl169;
-	int pincntl170;
-	int pincntl171;
-	int pincntl172;
-	int pincntl173;
-	int pincntl174;
-	int pincntl175;
-	int pincntl176;
-	int pincntl177;
-	int pincntl178;
-	int pincntl179;
-	int pincntl180;
-	int pincntl181;
-	int pincntl182;
-	int pincntl183;
-	int pincntl184;
-	int pincntl185;
-	int pincntl186;
-	int pincntl187;
-	int pincntl188;
-	int pincntl189;
-	int pincntl190;
-	int pincntl191;
-	int pincntl192;
-	int pincntl193;
-	int pincntl194;
-	int pincntl195;
-	int pincntl196;
-	int pincntl197;
-	int pincntl198;
-	int pincntl199;
-	int pincntl200;
-	int pincntl201;
-	int pincntl202;
-	int pincntl203;
-	int pincntl204;
-	int pincntl205;
-	int pincntl206;
-	int pincntl207;
-	int pincntl208;
-	int pincntl209;
-	int pincntl210;
-	int pincntl211;
-	int pincntl212;
-	int pincntl213;
-	int pincntl214;
-	int pincntl215;
-	int pincntl216;
-	int pincntl217;
-	int pincntl218;
-	int pincntl219;
-	int pincntl220;
-	int pincntl221;
-	int pincntl222;
-	int pincntl223;
-	int pincntl224;
-	int pincntl225;
-	int pincntl226;
-	int pincntl227;
-	int pincntl228;
-	int pincntl229;
-	int pincntl230;
-	int pincntl231;
-	int pincntl232;
-	int pincntl233;
-	int pincntl234;
-	int pincntl235;
-	int pincntl236;
-	int pincntl237;
-	int pincntl238;
-	int pincntl239;
-	int pincntl240;
-	int pincntl241;
-	int pincntl242;
-	int pincntl243;
-	int pincntl244;
-	int pincntl245;
-	int pincntl246;
-	int pincntl247;
-	int pincntl248;
-	int pincntl249;
-	int pincntl250;
-	int pincntl251;
-	int pincntl252;
-	int pincntl253;
-	int pincntl254;
-	int pincntl255;
-	int pincntl256;
-	int pincntl257;
-	int pincntl258;
-	int pincntl259;
-	int pincntl260;
-	int pincntl261;
-	int pincntl262;
-	int pincntl263;
-	int pincntl264;
-	int pincntl265;
-	int pincntl266;
-	int pincntl267;
-	int pincntl268;
-	int pincntl269;
-	int pincntl270;
-};
-
-#endif /* endif _MUX_TI814X_H_ */
diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h
index bc9f0a1146a..4c71dbf3ab6 100644
--- a/arch/arm/include/asm/arch-am33xx/omap.h
+++ b/arch/arm/include/asm/arch-am33xx/omap.h
@@ -20,7 +20,7 @@
 #define NON_SECURE_SRAM_START	0x402F0400
 #define NON_SECURE_SRAM_END	0x40310000
 #define NON_SECURE_SRAM_IMG_END	0x4030B800
-#elif defined(CONFIG_TI816X) || defined(CONFIG_TI814X)
+#elif defined(CONFIG_TI816X)
 #define NON_SECURE_SRAM_START	0x40300000
 #define NON_SECURE_SRAM_END	0x40320000
 #define NON_SECURE_SRAM_IMG_END	0x4031B800
diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h
index f3910c2123a..6bd3ca0d076 100644
--- a/arch/arm/include/asm/arch-am33xx/spl.h
+++ b/arch/arm/include/asm/arch-am33xx/spl.h
@@ -9,21 +9,7 @@
 #define BOOT_DEVICE_NONE	0x00
 #define BOOT_DEVICE_MMC2_2	0xFF
 
-#if defined(CONFIG_TI814X)
-#define BOOT_DEVICE_XIP		0x01
-#define BOOT_DEVICE_XIPWAIT	0x02
-#define BOOT_DEVICE_NAND	0x05
-#define BOOT_DEVICE_NAND_I2C	0x06
-#define BOOT_DEVICE_MMC2	0x08 /* ROM only supports 2nd instance. */
-#define BOOT_DEVICE_MMC1	0x09
-#define BOOT_DEVICE_SPI		0x15
-#define BOOT_DEVICE_UART	0x41
-#define BOOT_DEVICE_USBETH	0x44
-#define BOOT_DEVICE_CPGMAC	0x46
-
-#define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC2
-#define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC1
-#elif defined(CONFIG_TI816X)
+#if defined(CONFIG_TI816X)
 #define BOOT_DEVICE_XIP		0x01
 #define BOOT_DEVICE_XIPWAIT	0x02
 #define BOOT_DEVICE_NAND	0x03
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 3bf97205226..1db71df2721 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -75,14 +75,6 @@ config OMAP54XX
 	imply SPL_SERIAL
 	imply SYS_I2C_OMAP24XX
 
-config TI814X
-	bool "TI814X SoC"
-	select SPECIFY_CONSOLE_INDEX
-	help
-	  Support for AM335x SOC from Texas Instruments.
-	  The AM335x high performance SOC features a Cortex-A8
-	  ARM core and more.
-
 config TI816X
 	bool "TI816X SoC"
 	select SPECIFY_CONSOLE_INDEX
diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig
index b666e811104..1299aec055e 100644
--- a/arch/arm/mach-omap2/am33xx/Kconfig
+++ b/arch/arm/mach-omap2/am33xx/Kconfig
@@ -8,16 +8,6 @@ config TARGET_TI816X_EVM
 
 endif
 
-if TI814X
-
-config TARGET_TI814X_EVM
-	bool "Support ti814x_evm"
-	help
-	  This option specifies support for the TI8148
-	  EVM development platform.
-
-endif
-
 if AM33XX
 
 config AM33XX_CHILISOM
diff --git a/arch/arm/mach-omap2/am33xx/Makefile b/arch/arm/mach-omap2/am33xx/Makefile
index 4e4f98ea903..bf94d345dae 100644
--- a/arch/arm/mach-omap2/am33xx/Makefile
+++ b/arch/arm/mach-omap2/am33xx/Makefile
@@ -3,7 +3,6 @@
 # Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
 
 obj-$(CONFIG_AM33XX)	+= clock_am33xx.o
-obj-$(CONFIG_TI814X)	+= clock_ti814x.o
 obj-$(CONFIG_AM43XX)	+= clock_am43xx.o
 
 ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX),)
diff --git a/arch/arm/mach-omap2/am33xx/clock_ti814x.c b/arch/arm/mach-omap2/am33xx/clock_ti814x.c
deleted file mode 100644
index 27abaff48fc..00000000000
--- a/arch/arm/mach-omap2/am33xx/clock_ti814x.c
+++ /dev/null
@@ -1,410 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * clock_ti814x.c
- *
- * Clocks for TI814X based boards
- *
- * Copyright (C) 2013, Texas Instruments, Incorporated
- */
-
-#include <common.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-
-/* PRCM */
-#define PRCM_MOD_EN		0x2
-
-/* CLK_SRC */
-#define OSC_SRC0		0
-#define OSC_SRC1		1
-
-#define L3_OSC_SRC		OSC_SRC0
-
-#define OSC_0_FREQ		20
-
-#define DCO_HS2_MIN		500
-#define DCO_HS2_MAX		1000
-#define DCO_HS1_MIN		1000
-#define DCO_HS1_MAX		2000
-
-#define SELFREQDCO_HS2		0x00000801
-#define SELFREQDCO_HS1		0x00001001
-
-#define MPU_N			0x1
-#define MPU_M			0x3C
-#define MPU_M2			1
-#define MPU_CLKCTRL		0x1
-
-#define L3_N			19
-#define L3_M			880
-#define L3_M2			4
-#define L3_CLKCTRL		0x801
-
-#define DDR_N			19
-#define DDR_M			666
-#define DDR_M2			2
-#define DDR_CLKCTRL		0x801
-
-/* ADPLLJ register values */
-#define ADPLLJ_CLKCTRL_HS2	0x00000801 /* HS2 mode, TINT2 = 1 */
-#define ADPLLJ_CLKCTRL_HS1	0x00001001 /* HS1 mode, TINT2 = 1 */
-#define ADPLLJ_CLKCTRL_CLKDCOLDOEN	(1 << 29)
-#define ADPLLJ_CLKCTRL_IDLE		(1 << 23)
-#define ADPLLJ_CLKCTRL_CLKOUTEN		(1 << 20)
-#define ADPLLJ_CLKCTRL_CLKOUTLDOEN	(1 << 19)
-#define ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ	(1 << 17)
-#define ADPLLJ_CLKCTRL_LPMODE		(1 << 12)
-#define ADPLLJ_CLKCTRL_DRIFTGUARDIAN	(1 << 11)
-#define ADPLLJ_CLKCTRL_REGM4XEN		(1 << 10)
-#define ADPLLJ_CLKCTRL_TINITZ		(1 << 0)
-#define ADPLLJ_CLKCTRL_CLKDCO		(ADPLLJ_CLKCTRL_CLKDCOLDOEN | \
-					 ADPLLJ_CLKCTRL_CLKOUTEN | \
-					 ADPLLJ_CLKCTRL_CLKOUTLDOEN | \
-					 ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ)
-
-#define ADPLLJ_STATUS_PHASELOCK		(1 << 10)
-#define ADPLLJ_STATUS_FREQLOCK		(1 << 9)
-#define ADPLLJ_STATUS_PHSFRQLOCK	(ADPLLJ_STATUS_PHASELOCK | \
-					 ADPLLJ_STATUS_FREQLOCK)
-#define ADPLLJ_STATUS_BYPASSACK		(1 << 8)
-#define ADPLLJ_STATUS_BYPASS		(1 << 0)
-#define ADPLLJ_STATUS_BYPASSANDACK	(ADPLLJ_STATUS_BYPASSACK | \
-					 ADPLLJ_STATUS_BYPASS)
-
-#define ADPLLJ_TENABLE_ENB		(1 << 0)
-#define ADPLLJ_TENABLEDIV_ENB		(1 << 0)
-
-#define ADPLLJ_M2NDIV_M2SHIFT		16
-
-#define MPU_PLL_BASE			(PLL_SUBSYS_BASE + 0x048)
-#define L3_PLL_BASE			(PLL_SUBSYS_BASE + 0x110)
-#define DDR_PLL_BASE			(PLL_SUBSYS_BASE + 0x290)
-
-struct ad_pll {
-	unsigned int pwrctrl;
-	unsigned int clkctrl;
-	unsigned int tenable;
-	unsigned int tenablediv;
-	unsigned int m2ndiv;
-	unsigned int mn2div;
-	unsigned int fracdiv;
-	unsigned int bwctrl;
-	unsigned int fracctrl;
-	unsigned int status;
-	unsigned int m3div;
-	unsigned int rampctrl;
-};
-
-#define OSC_SRC_CTRL			(PLL_SUBSYS_BASE + 0x2C0)
-
-#define ENET_CLKCTRL_CMPL		0x30000
-
-#define SATA_PLL_BASE			(CTRL_BASE + 0x0720)
-
-struct sata_pll {
-	unsigned int pllcfg0;
-	unsigned int pllcfg1;
-	unsigned int pllcfg2;
-	unsigned int pllcfg3;
-	unsigned int pllcfg4;
-	unsigned int pllstatus;
-	unsigned int rxstatus;
-	unsigned int txstatus;
-	unsigned int testcfg;
-};
-
-#define SEL_IN_FREQ		(0x1 << 31)
-#define DIGCLRZ			(0x1 << 30)
-#define ENDIGLDO		(0x1 << 4)
-#define APLL_CP_CURR		(0x1 << 3)
-#define ENBGSC_REF		(0x1 << 2)
-#define ENPLLLDO		(0x1 << 1)
-#define ENPLL			(0x1 << 0)
-
-#define SATA_PLLCFG0_1 (SEL_IN_FREQ | ENBGSC_REF)
-#define SATA_PLLCFG0_2 (SEL_IN_FREQ | ENDIGLDO | ENBGSC_REF)
-#define SATA_PLLCFG0_3 (SEL_IN_FREQ | ENDIGLDO | ENBGSC_REF | ENPLLLDO)
-#define SATA_PLLCFG0_4 (SEL_IN_FREQ | DIGCLRZ | ENDIGLDO | ENBGSC_REF | \
-			ENPLLLDO | ENPLL)
-
-#define PLL_LOCK		(0x1 << 0)
-
-#define ENSATAMODE		(0x1 << 31)
-#define PLLREFSEL		(0x1 << 30)
-#define MDIVINT			(0x4b << 18)
-#define EN_CLKAUX		(0x1 << 5)
-#define EN_CLK125M		(0x1 << 4)
-#define EN_CLK100M		(0x1 << 3)
-#define EN_CLK50M		(0x1 << 2)
-
-#define SATA_PLLCFG1 (ENSATAMODE |	\
-		      PLLREFSEL |	\
-		      MDIVINT |		\
-		      EN_CLKAUX |	\
-		      EN_CLK125M |	\
-		      EN_CLK100M |	\
-		      EN_CLK50M)
-
-#define DIGLDO_EN_CAPLESSMODE	(0x1 << 22)
-#define PLLDO_EN_LDO_STABLE	(0x1 << 11)
-#define PLLDO_EN_BUF_CUR	(0x1 << 7)
-#define PLLDO_EN_LP		(0x1 << 6)
-#define PLLDO_CTRL_TRIM_1_4V	(0x10 << 1)
-
-#define SATA_PLLCFG3 (DIGLDO_EN_CAPLESSMODE |	\
-		      PLLDO_EN_LDO_STABLE |	\
-		      PLLDO_EN_BUF_CUR |	\
-		      PLLDO_EN_LP |		\
-		      PLLDO_CTRL_TRIM_1_4V)
-
-const struct cm_alwon *cmalwon = (struct cm_alwon *)CM_ALWON_BASE;
-const struct cm_def *cmdef = (struct cm_def *)CM_DEFAULT_BASE;
-const struct sata_pll *spll = (struct sata_pll *)SATA_PLL_BASE;
-
-/*
- * Enable the peripheral clock for required peripherals
- */
-static void enable_per_clocks(void)
-{
-	/* HSMMC1 */
-	writel(PRCM_MOD_EN, &cmalwon->mmchs1clkctrl);
-	while (readl(&cmalwon->mmchs1clkctrl) != PRCM_MOD_EN)
-		;
-
-	/* Ethernet */
-	writel(PRCM_MOD_EN, &cmalwon->ethclkstctrl);
-	writel(PRCM_MOD_EN, &cmalwon->ethernet0clkctrl);
-	while ((readl(&cmalwon->ethernet0clkctrl) & ENET_CLKCTRL_CMPL) != 0)
-		;
-	writel(PRCM_MOD_EN, &cmalwon->ethernet1clkctrl);
-	while ((readl(&cmalwon->ethernet1clkctrl) & ENET_CLKCTRL_CMPL) != 0)
-		;
-
-	/* RTC clocks */
-	writel(PRCM_MOD_EN, &cmalwon->rtcclkstctrl);
-	writel(PRCM_MOD_EN, &cmalwon->rtcclkctrl);
-	while (readl(&cmalwon->rtcclkctrl) != PRCM_MOD_EN)
-		;
-}
-
-/*
- * select the HS1 or HS2 for DCO Freq
- * return : CLKCTRL
- */
-static u32 pll_dco_freq_sel(u32 clkout_dco)
-{
-	if (clkout_dco >= DCO_HS2_MIN && clkout_dco < DCO_HS2_MAX)
-		return SELFREQDCO_HS2;
-	else if (clkout_dco >= DCO_HS1_MIN && clkout_dco < DCO_HS1_MAX)
-		return SELFREQDCO_HS1;
-	else
-		return -1;
-}
-
-/*
- * select the sigma delta config
- * return: sigma delta val
- */
-static u32 pll_sigma_delta_val(u32 clkout_dco)
-{
-	u32 sig_val = 0;
-
-	sig_val = (clkout_dco + 225) / 250;
-	sig_val = sig_val << 24;
-
-	return sig_val;
-}
-
-/*
- * configure individual ADPLLJ
- */
-static void pll_config(u32 base, u32 n, u32 m, u32 m2,
-		       u32 clkctrl_val, int adpllj)
-{
-	const struct ad_pll *adpll = (struct ad_pll *)base;
-	u32 m2nval, mn2val, read_clkctrl = 0, clkout_dco = 0;
-	u32 sig_val = 0, hs_mod = 0;
-
-	m2nval = (m2 << ADPLLJ_M2NDIV_M2SHIFT) | n;
-	mn2val = m;
-
-	/* calculate clkout_dco */
-	clkout_dco = ((OSC_0_FREQ / (n+1)) * m);
-
-	/* sigma delta & Hs mode selection skip for ADPLLS*/
-	if (adpllj) {
-		sig_val = pll_sigma_delta_val(clkout_dco);
-		hs_mod = pll_dco_freq_sel(clkout_dco);
-	}
-
-	/* by-pass pll */
-	read_clkctrl = readl(&adpll->clkctrl);
-	writel((read_clkctrl | ADPLLJ_CLKCTRL_IDLE), &adpll->clkctrl);
-	while ((readl(&adpll->status) & ADPLLJ_STATUS_BYPASSANDACK)
-		!= ADPLLJ_STATUS_BYPASSANDACK)
-		;
-
-	/* clear TINITZ */
-	read_clkctrl = readl(&adpll->clkctrl);
-	writel((read_clkctrl & ~ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl);
-
-	/*
-	 * ref_clk = 20/(n + 1);
-	 * clkout_dco = ref_clk * m;
-	 * clk_out = clkout_dco/m2;
-	*/
-	read_clkctrl = readl(&adpll->clkctrl) &
-			     ~(ADPLLJ_CLKCTRL_LPMODE |
-			     ADPLLJ_CLKCTRL_DRIFTGUARDIAN |
-			     ADPLLJ_CLKCTRL_REGM4XEN);
-	writel(m2nval, &adpll->m2ndiv);
-	writel(mn2val, &adpll->mn2div);
-
-	/* Skip for modena(ADPLLS) */
-	if (adpllj) {
-		writel(sig_val, &adpll->fracdiv);
-		writel((read_clkctrl | hs_mod), &adpll->clkctrl);
-	}
-
-	/* Load M2, N2 dividers of ADPLL */
-	writel(ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv);
-	writel(~ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv);
-
-	/* Load M, N dividers of ADPLL */
-	writel(ADPLLJ_TENABLE_ENB, &adpll->tenable);
-	writel(~ADPLLJ_TENABLE_ENB, &adpll->tenable);
-
-	/* Configure CLKDCOLDOEN,CLKOUTLDOEN,CLKOUT Enable BITS */
-	read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_CLKDCO;
-	if (adpllj)
-		writel((read_clkctrl | ADPLLJ_CLKCTRL_CLKDCO),
-						&adpll->clkctrl);
-
-	/* Enable TINTZ and disable IDLE(PLL in Active & Locked Mode */
-	read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_IDLE;
-	writel((read_clkctrl | ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl);
-
-	/* Wait for phase and freq lock */
-	while ((readl(&adpll->status) & ADPLLJ_STATUS_PHSFRQLOCK) !=
-	       ADPLLJ_STATUS_PHSFRQLOCK)
-		;
-}
-
-static void unlock_pll_control_mmr(void)
-{
-	/* TRM 2.10.1.4 and 3.2.7-3.2.11 */
-	writel(0x1EDA4C3D, 0x481C5040);
-	writel(0x2FF1AC2B, 0x48140060);
-	writel(0xF757FDC0, 0x48140064);
-	writel(0xE2BC3A6D, 0x48140068);
-	writel(0x1EBF131D, 0x4814006c);
-	writel(0x6F361E05, 0x48140070);
-}
-
-static void mpu_pll_config(void)
-{
-	pll_config(MPU_PLL_BASE, MPU_N, MPU_M, MPU_M2, MPU_CLKCTRL, 0);
-}
-
-static void l3_pll_config(void)
-{
-	u32 l3_osc_src, rd_osc_src = 0;
-
-	l3_osc_src = L3_OSC_SRC;
-	rd_osc_src = readl(OSC_SRC_CTRL);
-
-	if (OSC_SRC0 == l3_osc_src)
-		writel((rd_osc_src & 0xfffffffe)|0x0, OSC_SRC_CTRL);
-	else
-		writel((rd_osc_src & 0xfffffffe)|0x1, OSC_SRC_CTRL);
-
-	pll_config(L3_PLL_BASE, L3_N, L3_M, L3_M2, L3_CLKCTRL, 1);
-}
-
-void ddr_pll_config(unsigned int ddrpll_m)
-{
-	pll_config(DDR_PLL_BASE, DDR_N, DDR_M, DDR_M2, DDR_CLKCTRL, 1);
-}
-
-void sata_pll_config(void)
-{
-	/*
-	 * This sequence for configuring the SATA PLL
-	 * resident in the control module is documented
-	 * in TI8148 TRM section 21.3.1
-	 */
-	writel(SATA_PLLCFG1, &spll->pllcfg1);
-	udelay(50);
-
-	writel(SATA_PLLCFG3, &spll->pllcfg3);
-	udelay(50);
-
-	writel(SATA_PLLCFG0_1, &spll->pllcfg0);
-	udelay(50);
-
-	writel(SATA_PLLCFG0_2, &spll->pllcfg0);
-	udelay(50);
-
-	writel(SATA_PLLCFG0_3, &spll->pllcfg0);
-	udelay(50);
-
-	writel(SATA_PLLCFG0_4, &spll->pllcfg0);
-	udelay(50);
-
-	while (((readl(&spll->pllstatus) & PLL_LOCK) == 0))
-		;
-}
-
-void enable_dmm_clocks(void)
-{
-	writel(PRCM_MOD_EN, &cmdef->fwclkctrl);
-	writel(PRCM_MOD_EN, &cmdef->l3fastclkstctrl);
-	writel(PRCM_MOD_EN, &cmdef->emif0clkctrl);
-	while ((readl(&cmdef->emif0clkctrl)) != PRCM_MOD_EN)
-		;
-	writel(PRCM_MOD_EN, &cmdef->emif1clkctrl);
-	while ((readl(&cmdef->emif1clkctrl)) != PRCM_MOD_EN)
-		;
-	while ((readl(&cmdef->l3fastclkstctrl) & 0x300) != 0x300)
-		;
-	writel(PRCM_MOD_EN, &cmdef->dmmclkctrl);
-	while ((readl(&cmdef->dmmclkctrl)) != PRCM_MOD_EN)
-		;
-	writel(PRCM_MOD_EN, &cmalwon->l3slowclkstctrl);
-	while ((readl(&cmalwon->l3slowclkstctrl) & 0x2100) != 0x2100)
-		;
-}
-
-void setup_clocks_for_console(void)
-{
-	unlock_pll_control_mmr();
-	/* UART0 */
-	writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl);
-	while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN)
-		;
-}
-
-void setup_early_clocks(void)
-{
-	setup_clocks_for_console();
-}
-
-/*
- * Configure the PLL/PRCM for necessary peripherals
- */
-void prcm_init(void)
-{
-	/* Enable the control module */
-	writel(PRCM_MOD_EN, &cmalwon->controlclkctrl);
-
-	/* Configure PLLs */
-	mpu_pll_config();
-	l3_pll_config();
-	sata_pll_config();
-
-	/* Enable the required peripherals */
-	enable_per_clocks();
-}
diff --git a/arch/arm/mach-omap2/am33xx/emif4.c b/arch/arm/mach-omap2/am33xx/emif4.c
index a5fdb0433dc..bf3da43ed98 100644
--- a/arch/arm/mach-omap2/am33xx/emif4.c
+++ b/arch/arm/mach-omap2/am33xx/emif4.c
@@ -28,26 +28,6 @@ static struct cm_device_inst *cm_device =
 				(struct cm_device_inst *)CM_DEVICE_INST;
 #endif
 
-#ifdef CONFIG_TI814X
-void config_dmm(const struct dmm_lisa_map_regs *regs)
-{
-	struct dmm_lisa_map_regs *hw_lisa_map_regs =
-				(struct dmm_lisa_map_regs *)DMM_BASE;
-
-	enable_dmm_clocks();
-
-	writel(0, &hw_lisa_map_regs->dmm_lisa_map_3);
-	writel(0, &hw_lisa_map_regs->dmm_lisa_map_2);
-	writel(0, &hw_lisa_map_regs->dmm_lisa_map_1);
-	writel(0, &hw_lisa_map_regs->dmm_lisa_map_0);
-
-	writel(regs->dmm_lisa_map_3, &hw_lisa_map_regs->dmm_lisa_map_3);
-	writel(regs->dmm_lisa_map_2, &hw_lisa_map_regs->dmm_lisa_map_2);
-	writel(regs->dmm_lisa_map_1, &hw_lisa_map_regs->dmm_lisa_map_1);
-	writel(regs->dmm_lisa_map_0, &hw_lisa_map_regs->dmm_lisa_map_0);
-}
-#endif
-
 static void config_vtp(int nr)
 {
 	writel(readl(&vtpreg[nr]->vtp0ctrlreg) | VTP_CTRL_ENABLE,
diff --git a/arch/arm/mach-omap2/boot-common.c b/arch/arm/mach-omap2/boot-common.c
index f955d494718..d104f23b3e2 100644
--- a/arch/arm/mach-omap2/boot-common.c
+++ b/arch/arm/mach-omap2/boot-common.c
@@ -183,7 +183,7 @@ void save_omap_boot_params(void)
 
 	gd->arch.omap_boot_mode = boot_mode;
 
-#if !defined(CONFIG_TI814X) && !defined(CONFIG_TI816X) && \
+#if !defined(CONFIG_TI816X) && \
     !defined(CONFIG_AM33XX) && !defined(CONFIG_AM43XX)
 
 	/* CH flags */
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 08b6c7bdcc4..76e19918aad 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -704,7 +704,7 @@ config SYS_I2C_BUS_MAX
 	depends on ARCH_OMAP2PLUS || ARCH_SOCFPGA
 	default 2 if TI816X
 	default 3 if OMAP34XX || AM33XX || AM43XX
-	default 4 if ARCH_SOCFPGA || OMAP44XX || TI814X
+	default 4 if ARCH_SOCFPGA || OMAP44XX
 	default 5 if OMAP54XX
 	help
 	  Define the maximum number of available I2C buses.
diff --git a/drivers/net/ti/cpsw.c b/drivers/net/ti/cpsw.c
index a19dc38e525..3a8cc9c52a5 100644
--- a/drivers/net/ti/cpsw.c
+++ b/drivers/net/ti/cpsw.c
@@ -79,10 +79,6 @@ struct cpsw_slave_regs {
 	u32	tx_pri_map;
 #ifdef CONFIG_AM33XX
 	u32	gap_thresh;
-#elif defined(CONFIG_TI814X)
-	u32	ts_ctl;
-	u32	ts_seq_ltype;
-	u32	ts_vlan;
 #endif
 	u32	sa_lo;
 	u32	sa_hi;
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
deleted file mode 100644
index 03849adb5ab..00000000000
--- a/include/configs/ti814x_evm.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * ti814x_evm.h
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __CONFIG_TI814X_EVM_H
-#define __CONFIG_TI814X_EVM_H
-
-#include <asm/arch/omap.h>
-
-/* commands to include */
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"loadaddr=0x80200000\0" \
-	"fdtaddr=0x80F80000\0" \
-	"rdaddr=0x81000000\0" \
-	"bootfile=/boot/uImage\0" \
-	"fdtfile=\0" \
-	"console=ttyO0,115200n8\0" \
-	"optargs=\0" \
-	"mmcdev=0\0" \
-	"mmcroot=/dev/mmcblk0p2 ro\0" \
-	"mmcrootfstype=ext4 rootwait\0" \
-	"ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \
-	"ramrootfstype=ext2\0" \
-	"mmcargs=setenv bootargs console=${console} " \
-		"${optargs} " \
-		"root=${mmcroot} " \
-		"rootfstype=${mmcrootfstype}\0" \
-	"bootenv=uEnv.txt\0" \
-	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-	"importbootenv=echo Importing environment from mmc ...; " \
-		"env import -t $loadaddr $filesize\0" \
-	"ramargs=setenv bootargs console=${console} " \
-		"${optargs} " \
-		"root=${ramroot} " \
-		"rootfstype=${ramrootfstype}\0" \
-	"loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
-	"loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
-	"loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"bootm ${loadaddr}\0" \
-	"ramboot=echo Booting from ramdisk ...; " \
-		"run ramargs; " \
-		"bootm ${loadaddr}\0" \
-	"fdtfile=ti814x-evm.dtb\0" \
-
-/* Clock Defines */
-#define V_OSCK			24000000	/* Clock output from T2 */
-#define V_SCLK			(V_OSCK >> 1)
-
-
-/* Console I/O Buffer Size */
-
-/**
- * Physical Memory Map
- */
-#define PHYS_DRAM_1_SIZE		0x20000000	/* 512MB */
-#define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1024MB */
-
-#define CFG_SYS_SDRAM_BASE		0x80000000
-
-/**
- * Platform/Board specific defs
- */
-#define CFG_SYS_TIMERBASE		0x4802E000
-
-/* NS16550 Configuration */
-#define CFG_SYS_NS16550_CLK		(48000000)
-#define CFG_SYS_NS16550_COM1		0x48020000	/* Base EVM has UART0 */
-
-/* CPU */
-
-/* Defines for SPL */
-
-/*
- * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
- * 64 bytes before this address should be set aside for u-boot.img's
- * header. That is 0x800FFFC0--0x80800000 should not be used for any
- * other needs.
- */
-
-/*
- * Since SPL did pll and ddr initialization for us,
- * we don't need to do it twice.
- */
-
-/* Ethernet */
-#define CONFIG_PHY_ET1011C_TX_CLK_FIX
-
-#endif	/* ! __CONFIG_TI814X_EVM_H */