diff options
| author | Peter Robinson | 2017-07-01 18:44:03 +0100 |
|---|---|---|
| committer | Stefano Babic | 2017-07-12 09:44:22 +0200 |
| commit | ff1815632563a826cfe49fc9496a36d00febb6e3 (patch) | |
| tree | 33eaf54888edb9e9b7865acd50f2cc7613f9541b | |
| parent | d8fab10cb48e42c6ba84925af058349dca46dfa0 (diff) | |
mx6cuboxi: Add support for sata
The Cubox-i and Hummingboard series of devices have an option of
SATA on board, and depending on how the fuses are blown even the
option to boot SPL from SATA. So enable support for it so it can
be used to boot the OS from if people desire.
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
| -rw-r--r-- | board/solidrun/mx6cuboxi/mx6cuboxi.c | 5 | ||||
| -rw-r--r-- | include/configs/mx6cuboxi.h | 12 |
2 files changed, 17 insertions, 0 deletions
diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c index 285588d80a3..5c622164772 100644 --- a/board/solidrun/mx6cuboxi/mx6cuboxi.c +++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c @@ -22,6 +22,7 @@ #include <linux/errno.h> #include <asm/gpio.h> #include <asm/imx-common/iomux-v3.h> +#include <asm/imx-common/sata.h> #include <asm/imx-common/video.h> #include <mmc.h> #include <fsl_esdhc.h> @@ -314,6 +315,10 @@ int board_early_init_f(void) ret = setup_display(); #endif +#ifdef CONFIG_CMD_SATA + setup_sata(); +#endif + #ifdef CONFIG_USB_EHCI_MX6 setup_usb(); #endif diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index bc22f56d1da..71acc7c4db3 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -21,6 +21,17 @@ /* MMC Configs */ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR +/* SATA Configuration */ +#define CONFIG_CMD_SATA +#ifdef CONFIG_CMD_SATA +#define CONFIG_DWC_AHSATA +#define CONFIG_SYS_SATA_MAX_DEVICE 1 +#define CONFIG_DWC_AHSATA_PORT_ID 0 +#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR +#define CONFIG_LBA48 +#define CONFIG_LIBATA +#endif + /* Ethernet Configuration */ #define CONFIG_FEC_MXC #define CONFIG_MII @@ -116,6 +127,7 @@ #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ + func(SATA, sata, 0) \ func(USB, usb, 0) \ func(PXE, pxe, na) \ func(DHCP, dhcp, na) |