Convert CONFIG_ENV_IS_IN_SPI_FLASH to Kconfig

This converts the following to Kconfig:
   CONFIG_ENV_IS_IN_SPI_FLASH

Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 0 insertions, 37 deletions

diff --git a/README b/README
index b0a1b26605a..4cb32f18a82 100644
--- a/README
+++ b/README
@@ -3422,43 +3422,6 @@ environment in RAM: we could work on NVRAM directly, but we want to
 keep settings there always unmodified except somebody uses "saveenv"
 to save the current settings.
 
-- CONFIG_ENV_IS_IN_SPI_FLASH:
-
-	Define this if you have a SPI Flash memory device which you
-	want to use for the environment.
-
-	- CONFIG_ENV_OFFSET:
-	- CONFIG_ENV_SIZE:
-
-	  These two #defines specify the offset and size of the
-	  environment area within the SPI Flash. CONFIG_ENV_OFFSET must be
-	  aligned to an erase sector boundary.
-
-	- CONFIG_ENV_SECT_SIZE:
-
-	  Define the SPI flash's sector size.
-
-	- CONFIG_ENV_OFFSET_REDUND (optional):
-
-	  This setting describes a second storage area of CONFIG_ENV_SIZE
-	  size used to hold a redundant copy of the environment data, so
-	  that there is a valid backup copy in case there is a power failure
-	  during a "saveenv" operation. CONFIG_ENV_OFFSET_REDUND must be
-	  aligned to an erase sector boundary.
-
-	- CONFIG_ENV_SPI_BUS (optional):
-	- CONFIG_ENV_SPI_CS (optional):
-
-	  Define the SPI bus and chip select. If not defined they will be 0.
-
-	- CONFIG_ENV_SPI_MAX_HZ (optional):
-
-	  Define the SPI max work clock. If not defined then use 1MHz.
-
-	- CONFIG_ENV_SPI_MODE (optional):
-
-	  Define the SPI work mode. If not defined then use SPI_MODE_3.
-
 - CONFIG_ENV_IS_IN_REMOTE:
 
 	Define this if you have a remote memory space which you