diff options
| author | Christophe Leroy | 2017-07-06 10:33:27 +0200 |
|---|---|---|
| committer | Tom Rini | 2017-07-08 15:56:04 -0400 |
| commit | dd7ff4721aaf46533a42ebd017aecd70cafa98e3 (patch) | |
| tree | 4ee87b35080c7a0258e0789ab71d54546f0fe0ab /README | |
| parent | f88c431b8a264872e9391e039541792a13a5076a (diff) | |
powerpc, 8xx: move Serial driver to drivers/serial/
At the same time, move to Kconfig
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Diffstat (limited to 'README')
| -rw-r--r-- | README | 19 |
1 files changed, 0 insertions, 19 deletions
@@ -687,29 +687,10 @@ The following options need to be configured: Define this variable to enable hw flow control in serial driver. Current user of this option is drivers/serial/nsl16550.c driver -- Console Interface: - Depending on board, define exactly one serial port - (CONFIG_8xx_CONS_SMC1 or CONFIG_8xx_CONS_SMC2), - or switch off the serial console by defining - CONFIG_8xx_CONS_NONE - - Note: if CONFIG_8xx_CONS_NONE is defined, the serial - port routines must be defined elsewhere - (i.e. serial_init(), serial_getc(), ...) - - Console Baudrate: CONFIG_BAUDRATE - in bps Select one of the baudrates listed in CONFIG_SYS_BAUDRATE_TABLE, see below. - CONFIG_SYS_BRGCLK_PRESCALE, baudrate prescale - -- Console Rx buffer length - With CONFIG_SYS_SMC_RXBUFLEN it is possible to define - the maximum receive buffer length for the SMC. - This option is actual only for 8xx possible. - If using CONFIG_SYS_SMC_RXBUFLEN also CONFIG_SYS_MAXIDLE - must be defined, to setup the maximum idle timeout for - the SMC. - Autoboot Command: CONFIG_BOOTCOMMAND |