arm: meson-a1: dts: Sync DT with Linux

Import device tree changes from Linux v6.6-rc6 for Amlogic A1 board.

Signed-off-by: Igor Prusov <ivprusov@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231017213211.121550-3-ivprusov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

1 files changed, 351 insertions, 5 deletions

diff --git a/arch/arm/dts/meson-a1.dtsi b/arch/arm/dts/meson-a1.dtsi
index e3a42c5b248..648e7f49424 100644
--- a/arch/arm/dts/meson-a1.dtsi
+++ b/arch/arm/dts/meson-a1.dtsi
@@ -3,9 +3,13 @@
  * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
  */
 
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/amlogic,a1-pll-clkc.h>
+#include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
 #include <dt-bindings/gpio/meson-a1-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/meson-a1-power.h>
+#include <dt-bindings/reset/amlogic,meson-a1-reset.h>
 
 / {
 	compatible = "amlogic,a1";
@@ -37,9 +41,19 @@
 		l2: l2-cache0 {
 			compatible = "cache";
 			cache-level = <2>;
+			cache-unified;
 		};
 	};
 
+	efuse: efuse {
+		compatible = "amlogic,meson-gxbb-efuse";
+		clocks = <&clkc_periphs CLKID_OTP>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		secure-monitor = <&sm>;
+		power-domains = <&pwrc PWRC_OTP_ID>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -65,7 +79,6 @@
 		pwrc: power-controller {
 			compatible = "amlogic,meson-a1-pwrc";
 			#power-domain-cells = <1>;
-			status = "okay";
 		};
 	};
 
@@ -75,6 +88,16 @@
 		#size-cells = <2>;
 		ranges;
 
+		spifc: spi@fd000400 {
+			compatible = "amlogic,a1-spifc";
+			reg = <0x0 0xfd000400 0x0 0x290>;
+			clocks = <&clkc_periphs CLKID_SPIFC>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			power-domains = <&pwrc PWRC_SPIFC_ID>;
+			status = "disabled";
+		};
+
 		apb: bus@fe000000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xfe000000 0x0 0x1000000>;
@@ -103,10 +126,200 @@
 					gpio-ranges = <&periphs_pinctrl 0 0 62>;
 				};
 
+				i2c0_f11_pins: i2c0-f11 {
+					mux {
+						groups = "i2c0_sck_f11",
+							 "i2c0_sda_f12";
+						function = "i2c0";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c0_f9_pins: i2c0-f9 {
+					mux {
+						groups = "i2c0_sck_f9",
+							 "i2c0_sda_f10";
+						function = "i2c0";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c1_x_pins: i2c1-x {
+					mux {
+						groups = "i2c1_sck_x",
+							 "i2c1_sda_x";
+						function = "i2c1";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c1_a_pins: i2c1-a {
+					mux {
+						groups = "i2c1_sck_a",
+							 "i2c1_sda_a";
+						function = "i2c1";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c2_x0_pins: i2c2-x0 {
+					mux {
+						groups = "i2c2_sck_x0",
+							 "i2c2_sda_x1";
+						function = "i2c2";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c2_x15_pins: i2c2-x15 {
+					mux {
+						groups = "i2c2_sck_x15",
+							 "i2c2_sda_x16";
+						function = "i2c2";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c2_a4_pins: i2c2-a4 {
+					mux {
+						groups = "i2c2_sck_a4",
+							 "i2c2_sda_a5";
+						function = "i2c2";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c2_a8_pins: i2c2-a8 {
+					mux {
+						groups = "i2c2_sck_a8",
+							 "i2c2_sda_a9";
+						function = "i2c2";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c3_x_pins: i2c3-x {
+					mux {
+						groups = "i2c3_sck_x",
+							 "i2c3_sda_x";
+						function = "i2c3";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				i2c3_f_pins: i2c3-f {
+					mux {
+						groups = "i2c3_sck_f",
+							 "i2c3_sda_f";
+						function = "i2c3";
+						bias-pull-up;
+						drive-strength-microamp = <3000>;
+					};
+				};
+
+				uart_a_pins: uart-a {
+					mux {
+						groups = "uart_a_tx",
+							 "uart_a_rx";
+						function = "uart_a";
+					};
+				};
+
+				uart_a_cts_rts_pins: uart-a-cts-rts {
+					mux {
+						groups = "uart_a_cts",
+							 "uart_a_rts";
+						function = "uart_a";
+						bias-pull-down;
+					};
+				};
+
+				sdio_pins: sdio {
+					mux0 {
+						groups = "sdcard_d0_x",
+							 "sdcard_d1_x",
+							 "sdcard_d2_x",
+							 "sdcard_d3_x",
+							 "sdcard_cmd_x";
+						function = "sdcard";
+						bias-pull-up;
+					};
+
+					mux1 {
+						groups = "sdcard_clk_x";
+						function = "sdcard";
+						bias-disable;
+					};
+				};
+
+				sdio_clk_gate_pins: sdio-clk-gate {
+					mux {
+						groups = "sdcard_clk_x";
+						function = "sdcard";
+						bias-pull-down;
+					};
+				};
+
+				spifc_pins: spifc {
+					mux {
+						groups = "spif_mo",
+							 "spif_mi",
+							 "spif_clk",
+							 "spif_cs",
+							 "spif_hold_n",
+							 "spif_wp_n";
+						function = "spif";
+					};
+				};
+			};
+
+			gpio_intc: interrupt-controller@440 {
+				compatible = "amlogic,meson-a1-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0x0440 0x0 0x14>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts =
+					<49 50 51 52 53 54 55 56>;
+			};
+
+			clkc_periphs: clock-controller@800 {
+				compatible = "amlogic,a1-peripherals-clkc";
+				reg = <0 0x800 0 0x104>;
+				#clock-cells = <1>;
+				clocks = <&clkc_pll CLKID_FCLK_DIV2>,
+					 <&clkc_pll CLKID_FCLK_DIV3>,
+					 <&clkc_pll CLKID_FCLK_DIV5>,
+					 <&clkc_pll CLKID_FCLK_DIV7>,
+					 <&clkc_pll CLKID_HIFI_PLL>,
+					 <&xtal>;
+				clock-names = "fclk_div2", "fclk_div3",
+					      "fclk_div5", "fclk_div7",
+					      "hifi_pll", "xtal";
+			};
+
+			i2c0: i2c@1400 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1400 0x0 0x20>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_I2C_M_A>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
 			};
 
 			uart_AO: serial@1c00 {
-				compatible = "amlogic,meson-gx-uart",
+				compatible = "amlogic,meson-a1-uart",
 					     "amlogic,meson-ao-uart";
 				reg = <0x0 0x1c00 0x0 0x18>;
 				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
@@ -116,7 +329,7 @@
 			};
 
 			uart_AO_B: serial@2000 {
-				compatible = "amlogic,meson-gx-uart",
+				compatible = "amlogic,meson-a1-uart",
 					     "amlogic,meson-ao-uart";
 				reg = <0x0 0x2000 0x0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
@@ -125,9 +338,70 @@
 				status = "disabled";
 			};
 
+			saradc: adc@2c00 {
+				compatible = "amlogic,meson-g12a-saradc",
+					"amlogic,meson-saradc";
+				reg = <0x0 0x2c00 0x0 0x48>;
+				#io-channel-cells = <1>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>,
+					<&clkc_periphs CLKID_SARADC_EN>,
+					<&clkc_periphs CLKID_SARADC>,
+					<&clkc_periphs CLKID_SARADC_SEL>;
+				clock-names = "clkin", "core",
+					"adc_clk", "adc_sel";
+				status = "disabled";
+			};
+
+			i2c1: i2c@5c00 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x5c00 0x0 0x20>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_I2C_M_B>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+			};
+
+			i2c2: i2c@6800 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x6800 0x0 0x20>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_I2C_M_C>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+			};
+
+			i2c3: i2c@6c00 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x6c00 0x0 0x20>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_I2C_M_D>;
+				power-domains = <&pwrc PWRC_I2C_ID>;
+			};
+
+			usb2_phy1: phy@4000 {
+				compatible = "amlogic,a1-usb2-phy";
+				clocks = <&clkc_periphs CLKID_USB_PHY_IN>;
+				clock-names = "xtal";
+				reg = <0x0 0x4000 0x0 0x60>;
+				resets = <&reset RESET_USBPHY>;
+				reset-names = "phy";
+				#phy-cells = <0>;
+				power-domains = <&pwrc PWRC_USB_ID>;
+			};
+
 			hwrng: rng@5118 {
 				compatible = "amlogic,meson-rng";
 				reg = <0x0 0x5118 0x0 0x4>;
+				power-domains = <&pwrc PWRC_OTP_ID>;
 			};
 
 			sec_AO: ao-secure@5a20 {
@@ -135,6 +409,78 @@
 				reg = <0x0 0x5a20 0x0 0x140>;
 				amlogic,has-chip-id;
 			};
+
+			clkc_pll: pll-clock-controller@7c80 {
+				compatible = "amlogic,a1-pll-clkc";
+				reg = <0 0x7c80 0 0x18c>;
+				#clock-cells = <1>;
+				clocks = <&clkc_periphs CLKID_FIXPLL_IN>,
+					 <&clkc_periphs CLKID_HIFIPLL_IN>;
+				clock-names = "fixpll_in", "hifipll_in";
+			};
+
+			sd_emmc: sd@10000 {
+				compatible = "amlogic,meson-axg-mmc";
+				reg = <0x0 0x10000 0x0 0x800>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc_periphs CLKID_SD_EMMC_A>,
+					 <&clkc_periphs CLKID_SD_EMMC>,
+					 <&clkc_pll CLKID_FCLK_DIV2>;
+				clock-names = "core",
+					      "clkin0",
+					      "clkin1";
+				assigned-clocks = <&clkc_periphs CLKID_SD_EMMC_SEL2>;
+				assigned-clock-parents = <&xtal>;
+				resets = <&reset RESET_SD_EMMC_A>;
+				power-domains = <&pwrc PWRC_SD_EMMC_ID>;
+				status = "disabled";
+			};
+		};
+
+		usb: usb@fe004400 {
+			status = "disabled";
+			compatible = "amlogic,meson-a1-usb-ctrl";
+			reg = <0x0 0xfe004400 0x0 0xa0>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&clkc_periphs CLKID_USB_CTRL>,
+				 <&clkc_periphs CLKID_USB_BUS>,
+				 <&clkc_periphs CLKID_USB_CTRL_IN>;
+			clock-names = "usb_ctrl", "usb_bus", "xtal_usb_ctrl";
+			resets = <&reset RESET_USBCTRL>;
+			reset-name = "usb_ctrl";
+
+			dr_mode = "otg";
+
+			phys = <&usb2_phy1>;
+			phy-names = "usb2-phy1";
+
+			dwc3: usb@ff400000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xff400000 0x0 0x100000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,dis_u2_susphy_quirk;
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,parkmode-disable-ss-quirk;
+			};
+
+			dwc2: usb@ff500000 {
+				compatible = "amlogic,meson-a1-usb", "snps,dwc2";
+				reg = <0x0 0xff500000 0x0 0x40000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy1>;
+				phy-names = "usb2-phy";
+				clocks = <&clkc_periphs CLKID_USB_PHY>;
+				clock-names = "otg";
+				dr_mode = "peripheral";
+				g-rx-fifo-size = <192>;
+				g-np-tx-fifo-size = <128>;
+				g-tx-fifo-size = <128 128 16 16 16>;
+			};
 		};
 
 		gic: interrupt-controller@ff901000 {