Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC

By now, the majority of architectures have working relocation
support, so the few remaining architectures have become exceptions.
To make this more obvious, we make working relocation now the default
case, and flag the remaining cases with CONFIG_NEEDS_MANUAL_RELOC.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Reinhard Meyer <u-boot@emk-elektronik.de>

16 files changed, 16 insertions, 60 deletions

diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h
index 4124f0a9922..c60dba26bfa 100644
--- a/arch/arm/include/asm/config.h
+++ b/arch/arm/include/asm/config.h
@@ -21,9 +21,6 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
-/* Relocation to SDRAM works on all ARM boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
 #define CONFIG_LMB
 #define CONFIG_SYS_BOOT_RAMDISK_HIGH
 #endif
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index af9a414b88b..33b369496a1 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -679,15 +679,6 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #if !defined(CONFIG_SYS_NO_FLASH)
 	ulong flash_size;
 #endif
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
-	extern void malloc_bin_reloc (void);
-#if defined(CONFIG_CMD_BMP)
-	extern void bmp_reloc(void);
-#endif
-#if defined(CONFIG_CMD_I2C)
-	extern void i2c_reloc(void);
-#endif
-#endif
 
 	gd = id;
 	bd = gd->bd;
@@ -704,39 +695,16 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 	debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
 
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
-	/*
-	 * We have to relocate the command table manually
-	 */
-	fixup_cmdtable(&__u_boot_cmd_start,
-		(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
-#if defined(CONFIG_CMD_BMP)
-	bmp_reloc();
-#endif
-#if defined(CONFIG_CMD_I2C)
-	i2c_reloc();
-#endif
-#if defined(CONFIG_CMD_ONENAND)
-	onenand_reloc();
-#endif
-#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */
-
 #ifdef CONFIG_LOGBUFFER
 	logbuff_init_ptrs ();
 #endif
 #ifdef CONFIG_POST
 	post_output_backlog ();
-#ifndef CONFIG_RELOC_FIXUP_WORKS
-	post_reloc ();
-#endif
 #endif
 
 	/* The Malloc area is immediately below the monitor copy in DRAM */
 	malloc_start = dest_addr - TOTAL_MALLOC_LEN;
 	mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN);
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
-	malloc_bin_reloc ();
-#endif
 
 #if !defined(CONFIG_SYS_NO_FLASH)
 	puts ("FLASH: ");
diff --git a/arch/avr32/include/asm/config.h b/arch/avr32/include/asm/config.h
index 049c44eaf84..02fbfb3abfe 100644
--- a/arch/avr32/include/asm/config.h
+++ b/arch/avr32/include/asm/config.h
@@ -21,4 +21,6 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
+#define CONFIG_NEEDS_MANUAL_RELOC
+
 #endif
diff --git a/arch/avr32/lib/board.c b/arch/avr32/lib/board.c
index 96ccc7fa795..8b56237f189 100644
--- a/arch/avr32/lib/board.c
+++ b/arch/avr32/lib/board.c
@@ -272,13 +272,13 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
 
 	monitor_flash_len = _edata - _text;
 
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
 	/*
 	 * We have to relocate the command table manually
 	 */
 	fixup_cmdtable(&__u_boot_cmd_start,
 		(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
-#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */
+#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
 
 	/* there are some other pointer constants we must deal with */
 #ifndef CONFIG_ENV_IS_NOWHERE
diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h
index 34ca68c9d54..388434fea26 100644
--- a/arch/blackfin/include/asm/config.h
+++ b/arch/blackfin/include/asm/config.h
@@ -13,9 +13,6 @@
 # define CONFIG_BFIN_SCRATCH_REG retn
 #endif
 
-/* Relocation to SDRAM works on all Blackfin boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
 /* Make sure the structure is properly aligned */
 #if ((CONFIG_SYS_GBL_DATA_ADDR & -4) != CONFIG_SYS_GBL_DATA_ADDR)
 # error CONFIG_SYS_GBL_DATA_ADDR: must be 4 byte aligned
diff --git a/arch/i386/include/asm/config.h b/arch/i386/include/asm/config.h
index 1952de79f8a..049c44eaf84 100644
--- a/arch/i386/include/asm/config.h
+++ b/arch/i386/include/asm/config.h
@@ -21,6 +21,4 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
-#define CONFIG_RELOC_FIXUP_WORKS
-
 #endif
diff --git a/arch/m68k/include/asm/config.h b/arch/m68k/include/asm/config.h
index ec2cc16beba..51050a39a3e 100644
--- a/arch/m68k/include/asm/config.h
+++ b/arch/m68k/include/asm/config.h
@@ -21,6 +21,8 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
+#define CONFIG_NEEDS_MANUAL_RELOC
+
 #define CONFIG_LMB
 #define CONFIG_SYS_BOOT_RAMDISK_HIGH
 #define CONFIG_SYS_BOOT_GET_CMDLINE
diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c
index 976d5bf28af..9a519088582 100644
--- a/arch/m68k/lib/board.c
+++ b/arch/m68k/lib/board.c
@@ -420,13 +420,13 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 	monitor_flash_len = (ulong)&__init_end - dest_addr;
 
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
 	/*
 	 * We have to relocate the command table manually
 	 */
 	fixup_cmdtable(&__u_boot_cmd_start,
 		(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
-#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */
+#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
 
 	/* there are some other pointer constants we must deal with */
 #ifndef CONFIG_ENV_IS_NOWHERE
diff --git a/arch/microblaze/include/asm/config.h b/arch/microblaze/include/asm/config.h
index 8a9064b3c88..049c44eaf84 100644
--- a/arch/microblaze/include/asm/config.h
+++ b/arch/microblaze/include/asm/config.h
@@ -21,7 +21,4 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
-/* Relocation to SDRAM works on all Microblaze boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
 #endif
diff --git a/arch/mips/include/asm/config.h b/arch/mips/include/asm/config.h
index 049c44eaf84..02fbfb3abfe 100644
--- a/arch/mips/include/asm/config.h
+++ b/arch/mips/include/asm/config.h
@@ -21,4 +21,6 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
+#define CONFIG_NEEDS_MANUAL_RELOC
+
 #endif
diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c
index 4a22f7b41c7..f3171241556 100644
--- a/arch/mips/lib/board.c
+++ b/arch/mips/lib/board.c
@@ -295,13 +295,13 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 	monitor_flash_len = (ulong)&uboot_end_data - dest_addr;
 
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
 	/*
 	 * We have to relocate the command table manually
 	 */
 	fixup_cmdtable(&__u_boot_cmd_start,
 		(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
-#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */
+#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
 
 	/* there are some other pointer constants we must deal with */
 #ifndef CONFIG_ENV_IS_NOWHERE
diff --git a/arch/nios2/include/asm/config.h b/arch/nios2/include/asm/config.h
index 011d603a4b8..049c44eaf84 100644
--- a/arch/nios2/include/asm/config.h
+++ b/arch/nios2/include/asm/config.h
@@ -21,7 +21,4 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
-/* Relocation to SDRAM works on all NIOS2 boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
 #endif
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index a1942ca2bd9..76dedebe67c 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -89,9 +89,6 @@
 #define CONFIG_SYS_NUM_TLBCAMS	16
 #endif
 
-/* Relocation to SDRAM works on all PPC boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
 /* Since so many PPC SOCs have a semi-common LBC, define this here */
 #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \
 	defined(CONFIG_MPC83xx)
diff --git a/arch/sh/include/asm/config.h b/arch/sh/include/asm/config.h
index 978cc92f40a..049c44eaf84 100644
--- a/arch/sh/include/asm/config.h
+++ b/arch/sh/include/asm/config.h
@@ -21,7 +21,4 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
-/* Relocation to SDRAM works on all sh boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
 #endif
diff --git a/arch/sparc/include/asm/config.h b/arch/sparc/include/asm/config.h
index 6ddc3494c6b..7b6f30bd4a8 100644
--- a/arch/sparc/include/asm/config.h
+++ b/arch/sparc/include/asm/config.h
@@ -21,6 +21,8 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
+#define CONFIG_NEEDS_MANUAL_RELOC
+
 #define CONFIG_LMB
 #define CONFIG_SYS_BOOT_RAMDISK_HIGH
 
diff --git a/arch/sparc/lib/board.c b/arch/sparc/lib/board.c
index 4a6041f51ca..ab31cfb50ad 100644
--- a/arch/sparc/lib/board.c
+++ b/arch/sparc/lib/board.c
@@ -252,13 +252,13 @@ void board_init_f(ulong bootflag)
 	post_run(NULL, POST_ROM | post_bootmode_get(0));
 #endif
 
-#if !defined(CONFIG_RELOC_FIXUP_WORKS)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
 	/*
 	 * We have to relocate the command table manually
 	 */
 	fixup_cmdtable(&__u_boot_cmd_start,
 		(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
-#endif /* !defined(CONFIG_RELOC_FIXUP_WORKS) */
+#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
 
 #if defined(CONFIG_CMD_AMBAPP) && defined(CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP)
 	puts("AMBA:\n");