diff options
| author | Marek Vasut | 2015-12-05 17:54:35 +0100 |
|---|---|---|
| committer | Marek Vasut | 2015-12-20 03:36:49 +0100 |
| commit | 6b9cdb716f64d284046221e05bd10673c287bd05 (patch) | |
| tree | 68f7129b190fe1d71a42de5a2ceadf3ae90a4926 /board/altera | |
| parent | 5d8546efa7b134ff16f70c614571bd9d1676a4f8 (diff) | |
arm: socfpga: arria5-socdk: Remove Micrel PHY configuration
The Micrel PHY configuration is now done from OF, so hard-coding
the configuration into the board file is no longer necessary.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Diffstat (limited to 'board/altera')
| -rw-r--r-- | board/altera/arria5-socdk/socfpga.c | 40 |
1 files changed, 0 insertions, 40 deletions
diff --git a/board/altera/arria5-socdk/socfpga.c b/board/altera/arria5-socdk/socfpga.c index 0fbbc3456ca..ccb1b4b063e 100644 --- a/board/altera/arria5-socdk/socfpga.c +++ b/board/altera/arria5-socdk/socfpga.c @@ -12,10 +12,6 @@ #include <usb/dwc2_udc.h> #include <usb_mass_storage.h> -#include <micrel.h> -#include <netdev.h> -#include <phy.h> - DECLARE_GLOBAL_DATA_PTR; void s_init(void) {} @@ -31,42 +27,6 @@ int board_init(void) return 0; } -/* - * PHY configuration - */ -#ifdef CONFIG_PHY_MICREL_KSZ9021 -int board_phy_config(struct phy_device *phydev) -{ - int ret; - /* - * These skew settings for the KSZ9021 ethernet phy is required for ethernet - * to work reliably on most flavors of cyclone5 boards. - */ - ret = ksz9021_phy_extended_write(phydev, - MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, - 0x0); - if (ret) - return ret; - - ret = ksz9021_phy_extended_write(phydev, - MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, - 0x0); - if (ret) - return ret; - - ret = ksz9021_phy_extended_write(phydev, - MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, - 0xf0f0); - if (ret) - return ret; - - if (phydev->drv->config) - return phydev->drv->config(phydev); - - return 0; -} -#endif - #ifdef CONFIG_USB_GADGET struct dwc2_plat_otg_data socfpga_otg_data = { .regs_otg = CONFIG_USB_DWC2_REG_ADDR, |