* Update Intel IXP4xx support

- Add IXP4xx NPE ethernet MAC support
- Add support for Intel IXDPG425 board
- Add support for Prodrive PDNB3 board
- Add IRQ support
Patch by Stefan Roese, 23 May 2006

[This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still
 sufferes from licensing issues. Blame Intel.]

3 files changed, 61 insertions, 11 deletions

diff --git a/board/ixdp425/Makefile b/board/ixdp425/Makefile
index e4282c43a67..59d6964a4af 100644
--- a/board/ixdp425/Makefile
+++ b/board/ixdp425/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	:= ixdp425.o flash.o
+OBJS	:= ixdp425.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $^
diff --git a/board/ixdp425/config.mk b/board/ixdp425/config.mk
index 9f616f35806..34205864cf7 100644
--- a/board/ixdp425/config.mk
+++ b/board/ixdp425/config.mk
@@ -1,2 +1,4 @@
-#TEXT_BASE = 0x00100000
 TEXT_BASE = 0x00f80000
+
+# include NPE ethernet driver
+BOARDLIBS = cpu/ixp/npe/libnpe.a
diff --git a/board/ixdp425/ixdp425.c b/board/ixdp425/ixdp425.c
index aa965914507..eaf7cdefe56 100644
--- a/board/ixdp425/ixdp425.c
+++ b/board/ixdp425/ixdp425.c
@@ -1,4 +1,7 @@
 /*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
  * (C) Copyright 2002
  * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
  *
@@ -25,24 +28,21 @@
  * MA 02111-1307 USA
  */
 
-#include <asm/arch/ixp425.h>
 #include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <asm/arch/ixp425.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
 /*
  * Miscelaneous platform dependent initialisations
  */
-
-/**********************************************************/
-
 int board_post_init (void)
 {
 	return (0);
 }
 
-/**********************************************************/
-
 int board_init (void)
 {
 	/* arch number of IXDP */
@@ -51,10 +51,58 @@ int board_init (void)
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0x00000100;
 
+#ifdef CONFIG_IXDPG425
+	/* arch number of IXDP */
+	gd->bd->bi_arch_number = MACH_TYPE_IXDPG425;
+
+	/*
+	 * Get realtek RTL8305 switch and SLIC out of reset
+	 */
+	GPIO_OUTPUT_SET(CFG_GPIO_SWITCH_RESET_N);
+	GPIO_OUTPUT_ENABLE(CFG_GPIO_SWITCH_RESET_N);
+	GPIO_OUTPUT_SET(CFG_GPIO_SLIC_RESET_N);
+	GPIO_OUTPUT_ENABLE(CFG_GPIO_SLIC_RESET_N);
+
+	/*
+	 * Setup GPIO's for PCI INTA & INTB
+	 */
+	GPIO_OUTPUT_DISABLE(CFG_GPIO_PCI_INTA_N);
+	GPIO_INT_ACT_LOW_SET(CFG_GPIO_PCI_INTA_N);
+	GPIO_OUTPUT_DISABLE(CFG_GPIO_PCI_INTB_N);
+	GPIO_INT_ACT_LOW_SET(CFG_GPIO_PCI_INTB_N);
+
+	/*
+	 * Setup GPIO's for 33MHz clock output
+	 */
+	*IXP425_GPIO_GPCLKR = 0x01FF01FF;
+	GPIO_OUTPUT_ENABLE(CFG_GPIO_PCI_CLK);
+	GPIO_OUTPUT_ENABLE(CFG_GPIO_EXTBUS_CLK);
+#endif
+
 	return 0;
 }
 
-/**********************************************************/
+/*
+ * Check Board Identity
+ */
+int checkboard(void)
+{
+	char *s = getenv("serial#");
+
+#ifdef CONFIG_IXDPG425
+	puts("Board: IXDPG425 - Intel Network Gateway Reference Platform");
+#else
+	puts("Board: IXDP425 - Intel Development Platform");
+#endif
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return (0);
+}
 
 int dram_init (void)
 {
@@ -64,8 +112,7 @@ int dram_init (void)
 	return (0);
 }
 
-/**********************************************************/
-
+#if (CONFIG_COMMANDS & CFG_CMD_PCI) || defined(CONFIG_PCI)
 extern struct pci_controller hose;
 extern void pci_ixp_init(struct pci_controller * hose);
 
@@ -75,3 +122,4 @@ void pci_init_board(void)
 
 	pci_ixp_init(&hose);
 }
+#endif