board: sl28: implement additional bootsources

The board is able to boot from the following source:
 - user-updateble SPI flash
 - write-protected part of the same SPI flash
 - eMMC
 - SD card

Implement the needed function hooks to support all of these boot
sources.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Peng Fan <peng.fan@nxp.com>

4 files changed, 98 insertions, 1 deletions

diff --git a/board/kontron/sl28/common.c b/board/kontron/sl28/common.c
index 33c6843c3f7..331de29baee 100644
--- a/board/kontron/sl28/common.c
+++ b/board/kontron/sl28/common.c
@@ -2,6 +2,9 @@
 
 #include <common.h>
 #include <asm/global_data.h>
+#include <asm/io.h>
+
+#include "sl28.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -9,3 +12,22 @@ u32 get_lpuart_clk(void)
 {
 	return gd->bus_clk / CONFIG_SYS_FSL_LPUART_CLK_DIV;
 }
+
+enum boot_source sl28_boot_source(void)
+{
+	u32 rcw_src = in_le32(DCFG_BASE + DCFG_PORSR1) & DCFG_PORSR1_RCW_SRC;
+
+	switch (rcw_src) {
+	case DCFG_PORSR1_RCW_SRC_SDHC1:
+		return BOOT_SOURCE_SDHC;
+	case DCFG_PORSR1_RCW_SRC_SDHC2:
+		return BOOT_SOURCE_MMC;
+	case DCFG_PORSR1_RCW_SRC_I2C:
+		return BOOT_SOURCE_I2C;
+	case DCFG_PORSR1_RCW_SRC_FSPI_NOR:
+		return BOOT_SOURCE_SPI;
+	default:
+		debug("unknown bootsource (%08x)\n", rcw_src);
+		return BOOT_SOURCE_UNKNOWN;
+	}
+}
diff --git a/board/kontron/sl28/sl28.c b/board/kontron/sl28/sl28.c
index 32e9694b77c..54719cc01c8 100644
--- a/board/kontron/sl28/sl28.c
+++ b/board/kontron/sl28/sl28.c
@@ -24,6 +24,8 @@
 #include <fdtdec.h>
 #include <miiphy.h>
 
+#include "sl28.h"
+
 DECLARE_GLOBAL_DATA_PTR;
 
 #if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
@@ -60,6 +62,27 @@ int board_eth_init(struct bd_info *bis)
 	return pci_eth_init(bis);
 }
 
+enum env_location env_get_location(enum env_operation op, int prio)
+{
+	enum boot_source src = sl28_boot_source();
+
+	if (prio)
+		return ENVL_UNKNOWN;
+
+	if (!CONFIG_IS_ENABLED(ENV_IS_IN_SPI_FLASH))
+		return ENVL_NOWHERE;
+
+	/* write and erase always operate on the environment */
+	if (op == ENVOP_SAVE || op == ENVOP_ERASE)
+		return ENVL_SPI_FLASH;
+
+	/* failsafe boot will always use the compiled-in default environment */
+	if (src == BOOT_SOURCE_SPI)
+		return ENVL_NOWHERE;
+
+	return ENVL_SPI_FLASH;
+}
+
 static int __sl28cpld_read(uint reg)
 {
 	struct udevice *dev;
diff --git a/board/kontron/sl28/sl28.h b/board/kontron/sl28/sl28.h
new file mode 100644
index 00000000000..7f0105049cb
--- /dev/null
+++ b/board/kontron/sl28/sl28.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __SL28_H
+#define __SL28_H
+
+enum boot_source {
+	BOOT_SOURCE_UNKNOWN,
+	BOOT_SOURCE_SDHC,
+	BOOT_SOURCE_MMC,
+	BOOT_SOURCE_I2C,
+	BOOT_SOURCE_SPI,
+};
+
+enum boot_source sl28_boot_source(void);
+
+#endif
diff --git a/board/kontron/sl28/spl.c b/board/kontron/sl28/spl.c
index 0e6ad5f37e1..b1fefc22b2c 100644
--- a/board/kontron/sl28/spl.c
+++ b/board/kontron/sl28/spl.c
@@ -5,6 +5,9 @@
 #include <asm/spl.h>
 #include <asm/arch-fsl-layerscape/fsl_serdes.h>
 #include <asm/arch-fsl-layerscape/soc.h>
+#include <spi_flash.h>
+
+#include "sl28.h"
 
 #define DCFG_RCWSR25 0x160
 #define GPINFO_HW_VARIANT_MASK 0xff
@@ -58,7 +61,40 @@ int board_fit_config_name_match(const char *name)
 
 void board_boot_order(u32 *spl_boot_list)
 {
-	spl_boot_list[0] = BOOT_DEVICE_SPI;
+	enum boot_source src = sl28_boot_source();
+
+	switch (src) {
+	case BOOT_SOURCE_SDHC:
+		spl_boot_list[0] = BOOT_DEVICE_MMC2;
+		break;
+	case BOOT_SOURCE_SPI:
+	case BOOT_SOURCE_I2C:
+		spl_boot_list[0] = BOOT_DEVICE_SPI;
+		break;
+	case BOOT_SOURCE_MMC:
+		spl_boot_list[0] = BOOT_DEVICE_MMC1;
+		break;
+	default:
+		panic("unexpected bootsource (%d)\n", src);
+		break;
+	}
+}
+
+unsigned int spl_spi_get_uboot_offs(struct spi_flash *flash)
+{
+	enum boot_source src = sl28_boot_source();
+
+	switch (src) {
+	case BOOT_SOURCE_SPI:
+		return 0x000000;
+	case BOOT_SOURCE_I2C:
+		return 0x230000;
+	default:
+		panic("unexpected bootsource (%d)\n", src);
+		break;
+	}
+}
+
 }
 
 int board_early_init_f(void)