Nokia RX-51: Convert to CONFIG_DM_VIDEO

Mechanically convert video_hw_init() function to UCLASS_VIDEO probe
callback and replace CONFIG_CFB_CONSOLE by CONFIG_DM_VIDEO.

As framebuffer base address is setup by the bootloader which loads U-Boot,
set plat->base to that fixed framebuffer address.

This change was tested in qemu n900 machine and is working fine.

What does not work is CONFIG_VIDEO_LOGO, seems to be buggy.

Signed-off-by: Pali Rohár <pali@kernel.org>

1 files changed, 24 insertions, 16 deletions

diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c
index a52691509da..621cff09561 100644
--- a/board/nokia/rx51/rx51.c
+++ b/board/nokia/rx51/rx51.c
@@ -30,7 +30,7 @@
 #include <malloc.h>
 #include <twl4030.h>
 #include <i2c.h>
-#include <video_fb.h>
+#include <video.h>
 #include <keyboard.h>
 #include <asm/global_data.h>
 #include <asm/io.h>
@@ -62,8 +62,6 @@ struct emu_hal_params_rx51 {
 
 DECLARE_GLOBAL_DATA_PTR;
 
-GraphicDevice gdev;
-
 const omap3_sysinfo sysinfo = {
 	DDR_STACKED,
 	"Nokia RX-51",
@@ -342,22 +340,28 @@ void setup_board_tags(struct tag **in_params)
 	*in_params = params;
 }
 
-/*
- * Routine: video_hw_init
- * Description: Set up the GraphicDevice depending on sys_boot.
- */
-void *video_hw_init(void)
+static int rx51_video_probe(struct udevice *dev)
 {
-	/* fill in Graphic Device */
-	gdev.frameAdrs = 0x8f9c0000;
-	gdev.winSizeX = 800;
-	gdev.winSizeY = 480;
-	gdev.gdfBytesPP = 2;
-	gdev.gdfIndex = GDF_16BIT_565RGB;
-	memset((void *)gdev.frameAdrs, 0, 0xbb800);
-	return (void *) &gdev;
+	struct video_uc_plat *uc_plat = dev_get_uclass_plat(dev);
+	struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+
+	uc_plat->base = 0x8f9c0000;
+	uc_plat->size = 800 * 480 * sizeof(u16);
+	uc_priv->xsize = 800;
+	uc_priv->ysize = 480;
+	uc_priv->bpix = VIDEO_BPP16;
+
+	video_set_flush_dcache(dev, true);
+
+	return 0;
 }
 
+U_BOOT_DRIVER(rx51_video) = {
+	.name = "rx51_video",
+	.id = UCLASS_VIDEO,
+	.probe = rx51_video_probe,
+};
+
 /*
  * Routine: twl4030_regulator_set_mode
  * Description: Set twl4030 regulator mode over i2c powerbus.
@@ -777,6 +781,10 @@ U_BOOT_DRVINFOS(rx51_watchdog) = {
 	{ "rx51_watchdog" },
 };
 
+U_BOOT_DRVINFOS(rx51_video) = {
+	{ "rx51_video" },
+};
+
 U_BOOT_DRVINFOS(rx51_kp) = {
 	{ "rx51_kp" },
 };