* Code cleanup

* Patch by Sascha Hauer, 28 Jun:
  - add generic support for Motorola i.MX architecture
  - add support for mx1ads, mx1fs2 and scb9328 boards

* Patches by Marc Leeman, 23 Jul 2004:
  - Add define for the PCI/Memory Buffer Configuration Register
  - corrected comments in cpu/mpc824x/cpu_init.c

* Add support for multiple serial interfaces
  (for example to allow modem dial-in / dial-out)

7 files changed, 809 insertions, 0 deletions

diff --git a/board/scb9328/Makefile b/board/scb9328/Makefile
new file mode 100644
index 00000000000..212efcc4e55
--- /dev/null
+++ b/board/scb9328/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= scb9328.o flash.o
+SOBJS	:= memsetup.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/scb9328/config.mk b/board/scb9328/config.mk
new file mode 100644
index 00000000000..8d1d79ac906
--- /dev/null
+++ b/board/scb9328/config.mk
@@ -0,0 +1,10 @@
+#
+# This config file is used for compilation of scb93328 sources
+#
+# You might change location of U-Boot in memory by setting right TEXT_BASE.
+# This allows for example having one copy located at the end of ram and stored
+# in flash device and later on while developing use other location to test
+# the code in RAM device only.
+#
+
+TEXT_BASE = 0x08f00000
diff --git a/board/scb9328/flash.c b/board/scb9328/flash.c
new file mode 100644
index 00000000000..1b56f8c6aaa
--- /dev/null
+++ b/board/scb9328/flash.c
@@ -0,0 +1,321 @@
+/*
+ * Copyright (C) 2003 ETC s.r.o.
+ *
+ * This code was inspired by Marius Groeger and Kyle Harris code
+ * available in other board ports for U-Boot
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Written by Peter Figuli <peposh@etc.sk>, 2003.
+ *
+ */
+
+#include <common.h>
+#include "intel.h"
+
+
+/*
+ * This code should handle CFI FLASH memory device. This code is very
+ * minimalistic approach without many essential error handling code as well.
+ * Because U-Boot actually is missing smart handling of FLASH device,
+ * we just set flash_id to anything else to FLASH_UNKNOW, so common code
+ * can call us without any restrictions.
+ * TODO: Add CFI Query, to be able to determine FLASH device.
+ * TODO: Add error handling code
+ * NOTE: This code was tested with BUS_WIDTH 4 and ITERLEAVE 2 only, but
+ *       hopefully may work with other configurations.
+ */
+
+#if ( SCB9328_FLASH_BUS_WIDTH == 1 )
+#  define FLASH_BUS vu_char
+#  if ( SCB9328_FLASH_INTERLEAVE == 1 )
+#    define FLASH_CMD( x ) x
+#  else
+#    error "With 8bit bus only one chip is allowed"
+#  endif
+
+
+#elif ( SCB9328_FLASH_BUS_WIDTH == 2 )
+#  define FLASH_BUS vu_short
+#  if ( SCB9328_FLASH_INTERLEAVE == 1 )
+#    define FLASH_CMD( x ) x
+#  elif ( SCB9328_FLASH_INTERLEAVE == 2 )
+#    define FLASH_CMD( x ) (( x << 8 )| x )
+#  else
+#    error "With 16bit bus only 1 or 2 chip(s) are allowed"
+#  endif
+
+
+#elif ( SCB9328_FLASH_BUS_WIDTH == 4 )
+#  define FLASH_BUS vu_long
+#  if ( SCB9328_FLASH_INTERLEAVE == 1 )
+#    define FLASH_CMD( x ) x
+#  elif ( SCB9328_FLASH_INTERLEAVE == 2 )
+#    define FLASH_CMD( x ) (( x << 16 )| x )
+#  elif ( SCB9328_FLASH_INTERLEAVE == 4 )
+#    define FLASH_CMD( x ) (( x << 24 )|( x << 16 ) ( x << 8 )| x )
+#  else
+#    error "With 32bit bus only 1,2 or 4 chip(s) are allowed"
+#  endif
+
+#else
+#  error "Flash bus width might be 1,2,4 for 8,16,32 bit configuration"
+#endif
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+static FLASH_BUS flash_status_reg (void)
+{
+
+	FLASH_BUS *addr = (FLASH_BUS *) 0;
+
+	*addr = FLASH_CMD (CFI_INTEL_CMD_READ_STATUS_REGISTER);
+
+	return *addr;
+}
+
+static int flash_ready (ulong timeout)
+{
+	int ok = 1;
+
+	reset_timer_masked ();
+	while ((flash_status_reg () & FLASH_CMD (CFI_INTEL_SR_READY)) !=
+		   FLASH_CMD (CFI_INTEL_SR_READY)) {
+		if (get_timer_masked () > timeout && timeout != 0) {
+			ok = 0;
+			break;
+		}
+	}
+	return ok;
+}
+
+#if ( CFG_MAX_FLASH_BANKS != 1 )
+#  error "SCB9328 platform has only one flash bank!"
+#endif
+
+
+ulong flash_init (void)
+{
+	int i;
+	unsigned long address = SCB9328_FLASH_BASE;
+
+	flash_info[0].size = SCB9328_FLASH_BANK_SIZE;
+	flash_info[0].sector_count = CFG_MAX_FLASH_SECT;
+	flash_info[0].flash_id = INTEL_MANUFACT;
+	memset (flash_info[0].protect, 0, CFG_MAX_FLASH_SECT);
+
+	for (i = 0; i < CFG_MAX_FLASH_SECT; i++) {
+		flash_info[0].start[i] = address;
+#ifdef SCB9328_FLASH_UNLOCK
+		/* Some devices are hw locked after start. */
+		*((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_LOCK_SETUP);
+		*((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_UNLOCK_BLOCK);
+		flash_ready (0);
+		*((FLASH_BUS *) address) = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
+#endif
+		address += SCB9328_FLASH_SECT_SIZE;
+	}
+
+	flash_protect (FLAG_PROTECT_SET,
+				   CFG_FLASH_BASE,
+				   CFG_FLASH_BASE + monitor_flash_len - 1,
+				   &flash_info[0]);
+
+	flash_protect (FLAG_PROTECT_SET,
+				   CFG_ENV_ADDR,
+				   CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+	return SCB9328_FLASH_BANK_SIZE;
+}
+
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	printf (" Intel vendor\n");
+	printf ("  Size: %ld MB in %d Sectors\n",
+			info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; i++) {
+		if (!(i % 5)) {
+			printf ("\n");
+		}
+
+		printf (" %08lX%s", info->start[i],
+				info->protect[i] ? " (RO)" : "     ");
+	}
+	printf ("\n");
+}
+
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	int flag, non_protected = 0, sector;
+	int rc = ERR_OK;
+
+	FLASH_BUS *address;
+
+	for (sector = s_first; sector <= s_last; sector++) {
+		if (!info->protect[sector]) {
+			non_protected++;
+		}
+	}
+
+	if (!non_protected) {
+		return ERR_PROTECTED;
+	}
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+	flag = disable_interrupts ();
+
+
+	/* Start erase on unprotected sectors */
+	for (sector = s_first; sector <= s_last && !ctrlc (); sector++) {
+		if (info->protect[sector]) {
+			printf ("Protected sector %2d skipping...\n", sector);
+			continue;
+		} else {
+			printf ("Erasing sector %2d ... ", sector);
+		}
+
+		address = (FLASH_BUS *) (info->start[sector]);
+
+		*address = FLASH_CMD (CFI_INTEL_CMD_BLOCK_ERASE);
+		*address = FLASH_CMD (CFI_INTEL_CMD_CONFIRM);
+		if (flash_ready (CFG_FLASH_ERASE_TOUT)) {
+			*address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
+			printf ("ok.\n");
+		} else {
+			*address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
+			rc = ERR_TIMOUT;
+			printf ("timeout! Aborting...\n");
+			break;
+		}
+		*address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
+	}
+	if (ctrlc ())
+		printf ("User Interrupt!\n");
+
+	/* allow flash to settle - wait 10 ms */
+	udelay_masked (10000);
+	if (flag) {
+		enable_interrupts ();
+	}
+
+	return rc;
+}
+
+static int write_data (flash_info_t * info, ulong dest, FLASH_BUS data)
+{
+	FLASH_BUS *address = (FLASH_BUS *) dest;
+	int rc = ERR_OK;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*address & data) != data) {
+		return ERR_NOT_ERASED;
+	}
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+
+	flag = disable_interrupts ();
+
+	*address = FLASH_CMD (CFI_INTEL_CMD_CLEAR_STATUS_REGISTER);
+	*address = FLASH_CMD (CFI_INTEL_CMD_PROGRAM1);
+	*address = data;
+
+	if (!flash_ready (CFG_FLASH_WRITE_TOUT)) {
+		*address = FLASH_CMD (CFI_INTEL_CMD_SUSPEND);
+		rc = ERR_TIMOUT;
+		printf ("timeout! Aborting...\n");
+	}
+
+	*address = FLASH_CMD (CFI_INTEL_CMD_READ_ARRAY);
+	if (flag) {
+		enable_interrupts ();
+	}
+
+	return rc;
+}
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong read_addr, write_addr;
+	FLASH_BUS data;
+	int i, result = ERR_OK;
+
+
+	read_addr = addr & ~(sizeof (FLASH_BUS) - 1);
+	write_addr = read_addr;
+	if (read_addr != addr) {
+		data = 0;
+		for (i = 0; i < sizeof (FLASH_BUS); i++) {
+			if (read_addr < addr || cnt == 0) {
+				data |= *((uchar *) read_addr) << i * 8;
+			} else {
+				data |= (*src++) << i * 8;
+				cnt--;
+			}
+			read_addr++;
+		}
+		if ((result = write_data (info, write_addr, data)) != ERR_OK) {
+			return result;
+		}
+		write_addr += sizeof (FLASH_BUS);
+	}
+	for (; cnt >= sizeof (FLASH_BUS); cnt -= sizeof (FLASH_BUS)) {
+		if ((result = write_data (info, write_addr,
+								  *((FLASH_BUS *) src))) != ERR_OK) {
+			return result;
+		}
+		write_addr += sizeof (FLASH_BUS);
+		src += sizeof (FLASH_BUS);
+	}
+	if (cnt > 0) {
+		read_addr = write_addr;
+		data = 0;
+		for (i = 0; i < sizeof (FLASH_BUS); i++) {
+			if (cnt > 0) {
+				data |= (*src++) << i * 8;
+				cnt--;
+			} else {
+				data |= *((uchar *) read_addr) << i * 8;
+			}
+			read_addr++;
+		}
+		if ((result = write_data (info, write_addr, data)) != 0) {
+			return result;
+		}
+	}
+	return ERR_OK;
+}
diff --git a/board/scb9328/intel.h b/board/scb9328/intel.h
new file mode 100644
index 00000000000..77498b6e1df
--- /dev/null
+++ b/board/scb9328/intel.h
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2002 ETC s.r.o.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the ETC s.r.o. nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Written by Marcel Telka <marcel@telka.sk>, 2002.
+ *
+ * Documentation:
+ * [1] Intel Corporation, "3 Volt Intel Strata Flash Memory 28F128J3A, 28F640J3A,
+ *     28F320J3A (x8/x16)", April 2002, Order Number: 290667-011
+ * [2] Intel Corporation, "3 Volt Synchronous Intel Strata Flash Memory 28F640K3, 28F640K18,
+ *     28F128K3, 28F128K18, 28F256K3, 28F256K18 (x16)", June 2002, Order Number: 290737-005
+ *
+ * This file is taken from OpenWinCE project hosted by SourceForge.net
+ *
+ */
+
+#ifndef	FLASH_INTEL_H
+#define	FLASH_INTEL_H
+
+#include <common.h>
+
+/* Intel CFI commands - see Table 4. in [1] and Table 3. in [2] */
+
+#define	CFI_INTEL_CMD_READ_ARRAY		0xFF	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_READ_IDENTIFIER		0x90	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_READ_QUERY		0x98	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_READ_STATUS_REGISTER	0x70	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_CLEAR_STATUS_REGISTER	0x50	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_PROGRAM1			0x40	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_PROGRAM2			0x10	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_WRITE_TO_BUFFER		0xE8	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_CONFIRM			0xD0	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_BLOCK_ERASE		0x20	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_SUSPEND			0xB0	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_RESUME			0xD0	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_LOCK_SETUP		0x60	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_LOCK_BLOCK		0x01	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_UNLOCK_BLOCK		0xD0	/* 28FxxxJ3A - unlocks all blocks, 28FFxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_CMD_LOCK_DOWN_BLOCK		0x2F	/* 28FxxxK3, 28FxxxK18 */
+
+/* Intel CFI Status Register bits - see Table 6. in [1] and Table 7. in [2] */
+
+#define	CFI_INTEL_SR_READY			1 << 7	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_SR_ERASE_SUSPEND		1 << 6	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_SR_ERASE_ERROR		1 << 5	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_SR_PROGRAM_ERROR		1 << 4	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_SR_VPEN_ERROR			1 << 3	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_SR_PROGRAM_SUSPEND		1 << 2	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_SR_BLOCK_LOCKED		1 << 1	/* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
+#define	CFI_INTEL_SR_BEFP			1 << 0	/* 28FxxxK3, 28FxxxK18 */
+
+/* Intel flash device ID codes for 28FxxxJ3A - see Table 5. in [1] */
+
+#define	CFI_CHIP_INTEL_28F320J3A		0x0016
+#define	CFI_CHIPN_INTEL_28F320J3A		"28F320J3A"
+#define	CFI_CHIP_INTEL_28F640J3A		0x0017
+#define	CFI_CHIPN_INTEL_28F640J3A		"28F640J3A"
+#define	CFI_CHIP_INTEL_28F128J3A		0x0018
+#define	CFI_CHIPN_INTEL_28F128J3A		"28F128J3A"
+
+/* Intel flash device ID codes for 28FxxxK3 and 28FxxxK18 - see Table 8. in [2] */
+
+#define	CFI_CHIP_INTEL_28F640K3			0x8801
+#define	CFI_CHIPN_INTEL_28F640K3		"28F640K3"
+#define	CFI_CHIP_INTEL_28F128K3			0x8802
+#define	CFI_CHIPN_INTEL_28F128K3		"28F128K3"
+#define	CFI_CHIP_INTEL_28F256K3			0x8803
+#define	CFI_CHIPN_INTEL_28F256K3		"28F256K3"
+#define	CFI_CHIP_INTEL_28F640K18		0x8805
+#define	CFI_CHIPN_INTEL_28F640K18		"28F640K18"
+#define	CFI_CHIP_INTEL_28F128K18		0x8806
+#define	CFI_CHIPN_INTEL_28F128K18		"28F128K18"
+#define	CFI_CHIP_INTEL_28F256K18		0x8807
+#define	CFI_CHIPN_INTEL_28F256K18		"28F256K18"
+
+#endif /* FLASH_INTEL_H */
diff --git a/board/scb9328/memsetup.S b/board/scb9328/memsetup.S
new file mode 100644
index 00000000000..be5650a45f7
--- /dev/null
+++ b/board/scb9328/memsetup.S
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ * 02111-1307, USA.
+ *
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/imx-regs.h>
+
+.globl memsetup
+memsetup:
+
+	mov	r10, lr
+
+/* Change PERCLK1DIV to 14 ie 14+1 */
+	ldr		r0,	=PCDR
+	ldr		r1,	=CFG_PCDR_VAL
+	str		r1,   [r0]
+
+/* set MCU PLL Control Register 0 */
+
+	ldr		r0,	=MPCTL0
+	ldr		r1,	=CFG_MPCTL0_VAL
+	str		r1,   [r0]
+
+/* set mpll restart bit */
+	ldr		r0, =CSCR
+	ldr		r1, [r0]
+	orr		r1,r1,#(1<<21)
+	str		r1, [r0]
+
+	mov		r2,#0x10
+1:
+	mov		r3,#0x2000
+2:
+	subs	r3,r3,#1
+	bne		2b
+
+	subs	r2,r2,#1
+	bne		1b
+
+/* set System PLL Control Register 0 */
+
+	ldr		r0,	=SPCTL0
+	ldr		r1,	=CFG_SPCTL0_VAL
+	str		r1,   [r0]
+
+/* set spll restart bit */
+	ldr		r0, =CSCR
+	ldr		r1, [r0]
+	orr		r1,r1,#(1<<22)
+	str		r1, [r0]
+
+	mov		r2,#0x10
+1:
+	mov		r3,#0x2000
+2:
+	subs	r3,r3,#1
+	bne		2b
+
+	subs	r2,r2,#1
+	bne		1b
+
+	ldr		r0,   =CSCR
+	ldr		r1,   =CFG_CSCR_VAL
+	str		r1,   [r0]
+
+/* I have now read the ARM920 DataSheet back-to-Back, and have stumbled upon
+ *this.....
+ *
+ * It would appear that from a Cold-Boot the ARM920T enters "FastBus" mode CP15
+ * register 1, this stops it using the output of the PLL and thus runs at the
+ * slow rate. Unless you place the Core into "Asynch" mode, the CPU will never
+ * use the value set in the CM_OSC registers...regardless of what you set it
+ * too!  Thus, although i thought i was running at 140MHz, i'm actually running
+ * at 40!..
+
+ * Slapping this into my bootloader does the trick...
+
+ * MRC p15,0,r0,c1,c0,0    ; read core configuration register
+ * ORR r0,r0,#0xC0000000   ; set asynchronous clocks and not fastbus mode
+ * MCR p15,0,r0,c1,c0,0    ; write modified value to core configuration
+ * register
+ */
+	MRC p15,0,r0,c1,c0,0
+	ORR r0,r0,#0xC0000000
+	MCR p15,0,r0,c1,c0,0
+
+	ldr		r0,	=GPR(0)
+	ldr		r1,	=CFG_GPR_A_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GIUS(0)
+	ldr		r1,	=CFG_GIUS_A_VAL
+	str		r1,   [r0]
+
+/* CS3 becomes CS3 by clearing reset default bit 1 in FMCR */
+
+	ldr		r0,	=FMCR
+	ldr		r1,	=CFG_FMCR_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS0U
+	ldr		r1,	=CFG_CS0U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS0L
+	ldr		r1,	=CFG_CS0L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS1U
+	ldr		r1,	=CFG_CS1U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS1L
+	ldr		r1,	=CFG_CS1L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS2U
+	ldr		r1,	=CFG_CS2U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS2L
+	ldr		r1,	=CFG_CS2L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS3U
+	ldr		r1,	=CFG_CS3U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS3L
+	ldr		r1,	=CFG_CS3L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS4U
+	ldr		r1,	=CFG_CS4U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS4L
+	ldr		r1,	=CFG_CS4L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS5U
+	ldr		r1,	=CFG_CS5U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=CS5L
+	ldr		r1,	=CFG_CS5L_VAL
+	str		r1,   [r0]
+
+/* SDRAM Setup */
+
+	ldr		r0, =SDCTL0
+	ldr		r1, =PRECHARGE_CMD
+	str		r1,   [r0]
+
+	ldr		r0, =0x08200000
+	ldr		r1, =0x0 /* Issue Precharge all Command */
+	str		r1,   [r0]
+
+	ldr		r0, =SDCTL0
+	ldr		r1, =AUTOREFRESH_CMD
+	str		r1,   [r0]
+
+	ldr		r0, =0x08000000
+	ldr		r1, =0x0 /* Issue AutoRefresh Command */
+	str		r1,   [r0]
+	str		r1,   [r0]
+	str		r1,   [r0]
+	str		r1,   [r0]
+	str		r1,   [r0]
+	str		r1,   [r0]
+	str		r1,   [r0]
+	str		r1,   [r0]
+
+	ldr		r0, =SDCTL0
+	ldr		r1, =0xb10a8300
+	str		r1,   [r0]
+
+	ldr		r0, =0x08223000 /* CAS Latency 2 */
+	ldr		r1, =0x0   /* Issue Mode Register Command, Burst Length = 8 */
+	str		r1,   [r0]
+
+	ldr		r0, =SDCTL0
+	ldr		r1, =0x810a8200 /* Set to Normal Mode CAS 2 */
+	str		r1,   [r0]
+
+	mov	pc,r10
diff --git a/board/scb9328/scb9328.c b/board/scb9328/scb9328.c
new file mode 100644
index 00000000000..a1fe0aefeb3
--- /dev/null
+++ b/board/scb9328/scb9328.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+# define SHOW_BOOT_PROGRESS(arg)        show_boot_progress(arg)
+#else
+# define SHOW_BOOT_PROGRESS(arg)
+#endif
+
+int board_init( void ){
+  DECLARE_GLOBAL_DATA_PTR;
+
+  gd->bd->bi_arch_number = 508;
+  gd->bd->bi_boot_params = 0x08000100;
+
+  return 0;
+}
+
+int dram_init( void ){
+  DECLARE_GLOBAL_DATA_PTR;
+
+#if ( CONFIG_NR_DRAM_BANKS > 0 )
+  gd->bd->bi_dram[0].start = SCB9328_SDRAM_1;
+  gd->bd->bi_dram[0].size  = SCB9328_SDRAM_1_SIZE;
+#endif
+#if ( CONFIG_NR_DRAM_BANKS > 1 )
+  gd->bd->bi_dram[1].start = SCB9328_SDRAM_2;
+  gd->bd->bi_dram[1].size  = SCB9328_SDRAM_2_SIZE;
+#endif
+#if ( CONFIG_NR_DRAM_BANKS > 2 )
+  gd->bd->bi_dram[2].start = SCB9328_SDRAM_3;
+  gd->bd->bi_dram[2].size  = SCB9328_SDRAM_3_SIZE;
+#endif
+#if ( CONFIG_NR_DRAM_BANKS > 3 )
+  gd->bd->bi_dram[3].start = SCB9328_SDRAM_4;
+  gd->bd->bi_dram[3].size  = SCB9328_SDRAM_4_SIZE;
+#endif
+
+  return 0;
+}
+
+/**
+ * show_boot_progress: - indicate state of the boot process
+ *
+ * @param status: Status number - see README for details.
+ *
+ * The CSB226 does only have 3 LEDs, so we switch them on at the most
+ * important states (1, 5, 15).
+ */
+
+void show_boot_progress (int status)
+{
+	return;
+}
diff --git a/board/scb9328/u-boot.lds b/board/scb9328/u-boot.lds
new file mode 100644
index 00000000000..5076303c7ef
--- /dev/null
+++ b/board/scb9328/u-boot.lds
@@ -0,0 +1,56 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text      :
+	{
+		cpu/arm920t/start.o	(.text)
+		*(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}