arm: Remove nhk8815 boards and nomadik arch

These boards have not been converted to generic board by the deadline.
Remove them.

Signed-off-by: Simon Glass <sjg@chromium.org>

5 files changed, 0 insertions, 156 deletions

diff --git a/board/st/nhk8815/Kconfig b/board/st/nhk8815/Kconfig
deleted file mode 100644
index 94547dc118d..00000000000
--- a/board/st/nhk8815/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if NOMADIK_NHK8815
-
-config SYS_BOARD
-	default "nhk8815"
-
-config SYS_VENDOR
-	default "st"
-
-config SYS_CONFIG_NAME
-	default "nhk8815"
-
-endif
diff --git a/board/st/nhk8815/MAINTAINERS b/board/st/nhk8815/MAINTAINERS
deleted file mode 100644
index 72c3a8d9039..00000000000
--- a/board/st/nhk8815/MAINTAINERS
+++ /dev/null
@@ -1,8 +0,0 @@
-NHK8815 BOARD
-M:	Nomadik Linux Team <STN_WMM_nomadik_linux@list.st.com>
-M:	Alessandro Rubini <rubini@unipv.it>
-S:	Maintained
-F:	board/st/nhk8815/
-F:	include/configs/nhk8815.h
-F:	configs/nhk8815_defconfig
-F:	configs/nhk8815_onenand_defconfig
diff --git a/board/st/nhk8815/Makefile b/board/st/nhk8815/Makefile
deleted file mode 100644
index dd56944db16..00000000000
--- a/board/st/nhk8815/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2004
-# ARM Ltd.
-# Philippe Robin, <philippe.robin@arm.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= nhk8815.o
diff --git a/board/st/nhk8815/README.nhk8815 b/board/st/nhk8815/README.nhk8815
deleted file mode 100644
index 9008e393637..00000000000
--- a/board/st/nhk8815/README.nhk8815
+++ /dev/null
@@ -1,32 +0,0 @@
-
-The Nomadik 8815 CPU has a "secure" boot mode where no external access
-(not even JTAG) is allowed.  The "remap" bits in the evaluation board
-are configured in order to boot from the internal ROM memory (in
-secure mode).
-
-The boot process as defined by the manufacturer executes external code
-(loaded from NAND or OneNAND) that that disables such "security" in
-order to run u-boot and later the kernel without constraints. Such
-code is a proprietary initial boot loader, called "X-Loader" (in case
-anyone wonders, it has no relations with other loaders with the same
-name and there is no GPL code inside the ST X-Loader).
-
-SDRAM configuration, PLL setup and initial loading from NAND is
-implemented in the X-Loader, so U-Boot is already running in SDRAM
-when control is handed over to it.
-
-The Makefile offers two different configurations to be used if you
-boot from Nand or OneNand.
-
-    make nhk8815_config
-    make nhk8815_onenand_config
-
-Both support OneNand and Nand. Since U-Boot, running in RAM, can't know
-where it was loaded from, the configurations differ in where the filesystem
-is looked for by default.
-
-
-On www.st.com/nomadik and on www.stnwireless.com there are documents,
-summary data and white papers on Nomadik. The full datasheet for
-STn8815 is not currently available on line but under specific request
-to the local ST sales offices.
diff --git a/board/st/nhk8815/nhk8815.c b/board/st/nhk8815/nhk8815.c
deleted file mode 100644
index 94d0f76266e..00000000000
--- a/board/st/nhk8815/nhk8815.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * (C) Copyright 2005
- * STMicrolelctronics, <www.st.com>
- *
- * (C) Copyright 2004
- * ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <asm/arch/gpio.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-void show_boot_progress(int progress)
-{
-	printf("%i\n", progress);
-}
-#endif
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-int board_init(void)
-{
-	gd->bd->bi_arch_number = MACH_TYPE_NOMADIK;
-	gd->bd->bi_boot_params = 0x00000100;
-	writel(0xC37800F0, NOMADIK_GPIO1_BASE + 0x20);
-	writel(0x00000000, NOMADIK_GPIO1_BASE + 0x24);
-	writel(0x00000000, NOMADIK_GPIO1_BASE + 0x28);
-	writel(readl(NOMADIK_SRC_BASE) | 0x8000, NOMADIK_SRC_BASE);
-
-	/* Set up SMCS1 for Ethernet: sram-like, enabled, timing values */
-	writel(0x0000305b, REG_FSMC_BCR1);
-	writel(0x00033f33, REG_FSMC_BTR1);
-
-	/* Set up SMCS0 for OneNand: sram-like once again */
-	writel(0x000030db, NOMADIK_FSMC_BASE + 0x00); /* FSMC_BCR0 */
-	writel(0x02100551, NOMADIK_FSMC_BASE + 0x04); /* FSMC_BTR0 */
-
-	icache_enable();
-	return 0;
-}
-
-int board_late_init(void)
-{
-	/* Set the two I2C gpio lines to be gpio high */
-	nmk_gpio_set(__SCL, 1);	nmk_gpio_set(__SDA, 1);
-	nmk_gpio_dir(__SCL, 1);	nmk_gpio_dir(__SDA, 1);
-	nmk_gpio_af(__SCL, GPIO_GPIO); nmk_gpio_af(__SDA, GPIO_GPIO);
-
-	/* Reset the I2C port expander, on GPIO77 */
-	nmk_gpio_af(77, GPIO_GPIO);
-	nmk_gpio_dir(77, 1);
-	nmk_gpio_set(77, 0);
-	udelay(10);
-	nmk_gpio_set(77, 1);
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE,
-				    CONFIG_SYS_SDRAM_SIZE);
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC91111
-	rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
-	return rc;
-}
-#endif