arc: emsdp: Add initialization of PSRAM

If the "Page Mode" is not enabled on the device,
read operations from PSRAM may result in incorrect data.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>

1 files changed, 37 insertions, 0 deletions

diff --git a/board/synopsys/emsdp/emsdp.c b/board/synopsys/emsdp/emsdp.c
index c0770b58c1f..7a3fd5b7f2c 100644
--- a/board/synopsys/emsdp/emsdp.c
+++ b/board/synopsys/emsdp/emsdp.c
@@ -48,6 +48,43 @@ int mach_cpu_init(void)
 	return 0;
 }
 
+int board_early_init_r(void)
+{
+#define EMSDP_PSRAM_BASE		0xf2001000
+#define PSRAM_FLASH_CONFIG_REG_0	(void *)(EMSDP_PSRAM_BASE + 0x10)
+#define PSRAM_FLASH_CONFIG_REG_1	(void *)(EMSDP_PSRAM_BASE + 0x14)
+#define CRE_ENABLE			BIT(31)
+#define CRE_DRIVE_CMD			BIT(6)
+
+#define PSRAM_RCR_DPD			BIT(1)
+#define PSRAM_RCR_PAGE_MODE		BIT(7)
+
+/*
+ * PSRAM_FLASH_CONFIG_REG_x[30:15] to the address lines[16:1] of flash,
+ * thus "<< 1".
+ */
+#define PSRAM_RCR_SETUP		((PSRAM_RCR_DPD | PSRAM_RCR_PAGE_MODE) << 1)
+
+	// Switch PSRAM controller to command mode
+	writel(CRE_ENABLE | CRE_DRIVE_CMD, PSRAM_FLASH_CONFIG_REG_0);
+	// Program Refresh Configuration Register (RCR) for BANK0
+	writew(0, (void *)(0x10000000 + PSRAM_RCR_SETUP));
+	// Switch PSRAM controller back to memory mode
+	writel(0, PSRAM_FLASH_CONFIG_REG_0);
+
+
+	// Switch PSRAM controller to command mode
+	writel(CRE_ENABLE | CRE_DRIVE_CMD, PSRAM_FLASH_CONFIG_REG_1);
+	// Program Refresh Configuration Register (RCR) for BANK1
+	writew(0, (void *)(0x10800000 + PSRAM_RCR_SETUP));
+	// Switch PSRAM controller back to memory mode
+	writel(0, PSRAM_FLASH_CONFIG_REG_1);
+
+	printf("PSRAM initialized.\n");
+
+	return 0;
+}
+
 int board_mmc_init(bd_t *bis)
 {
 	struct dwmci_host *host = NULL;