arm: mvebu: Add support for the Armada XP theadorable board

This patch adds support for the Armada XP (MV78260) based theadorable
board. Its equipped with onboard DDR3, UART, ethernet, I2C, SPI NOR,
LCD and SATA (SSD) interfaces / devices.

Two defconfigs are added:

theadorable_defconfig:
The production U-Boot version with a stripped down drivers and feature
list. This removes networking, USB and PCI support.

theadorable_debug_defconfig:
The debugging / testing U-Boot version with full support for all drivers.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Signed-off-by: Stefan Roese <sr@denx.de>

4 files changed, 197 insertions, 0 deletions

diff --git a/board/theadorable/MAINTAINERS b/board/theadorable/MAINTAINERS
new file mode 100644
index 00000000000..5ae6b6487c4
--- /dev/null
+++ b/board/theadorable/MAINTAINERS
@@ -0,0 +1,7 @@
+THEADORABLE BOARD
+M:	Stefan Roese <sr@denx.de>
+S:	Maintained
+F:	board/theadorable/
+F:	include/configs/theadorable.h
+F:	configs/theadorable_debug_defconfig
+F:	configs/theadorable_defconfig
diff --git a/board/theadorable/Makefile b/board/theadorable/Makefile
new file mode 100644
index 00000000000..9d5b39e6964
--- /dev/null
+++ b/board/theadorable/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= theadorable.o
diff --git a/board/theadorable/kwbimage.cfg b/board/theadorable/kwbimage.cfg
new file mode 100644
index 00000000000..4f3b7b23f37
--- /dev/null
+++ b/board/theadorable/kwbimage.cfg
@@ -0,0 +1,12 @@
+#
+# Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
+#
+
+# Armada XP uses version 1 image format
+VERSION		1
+
+# Boot Media configurations
+BOOT_FROM	spi
+
+# Binary Header (bin_hdr) with DDR3 training code
+BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068
diff --git a/board/theadorable/theadorable.c b/board/theadorable/theadorable.c
new file mode 100644
index 00000000000..0e232656fc9
--- /dev/null
+++ b/board/theadorable/theadorable.c
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#ifdef CONFIG_NET
+#include <netdev.h>
+#endif
+
+#include "../drivers/ddr/marvell/axp/ddr3_hw_training.h"
+#include "../arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define THEADORABLE_GPP_OUT_ENA_LOW	0x00336780
+#define THEADORABLE_GPP_OUT_ENA_MID	0x00003cf0
+#define THEADORABLE_GPP_OUT_ENA_HIGH	(~(0x0))
+
+#define THEADORABLE_GPP_OUT_VAL_LOW	0x2c0c983f
+#define THEADORABLE_GPP_OUT_VAL_MID	0x0007000c
+#define THEADORABLE_GPP_OUT_VAL_HIGH	0x00000000
+
+/* DDR3 static configuration */
+static MV_DRAM_MC_INIT ddr3_theadorable[MV_MAX_DDR3_STATIC_SIZE] = {
+	{0x00001400, 0x7301ca28},	/* DDR SDRAM Configuration Register */
+	{0x00001404, 0x30000800},	/* Dunit Control Low Register */
+	{0x00001408, 0x44149887},	/* DDR SDRAM Timing (Low) Register */
+	{0x0000140C, 0x38d93fc7},	/* DDR SDRAM Timing (High) Register */
+	{0x00001410, 0x1b100001},	/* DDR SDRAM Address Control Register */
+	{0x00001424, 0x0000f3ff},	/* Dunit Control High Register */
+	{0x00001428, 0x000f8830},	/* ODT Timing (Low) Register */
+	{0x0000142C, 0x014c50f4},	/* DDR3 Timing Register */
+	{0x0000147C, 0x0000c671},	/* ODT Timing (High) Register */
+
+	{0x00001494, 0x00010000},	/* DDR SDRAM ODT Control (Low) Reg */
+	{0x0000149C, 0x00000001},	/* DDR Dunit ODT Control Register */
+	{0x000014A0, 0x00000001},	/* DRAM FIFO Control Register */
+	{0x000014A8, 0x00000101},	/* AXI Control Register */
+
+	/*
+	 * DO NOT Modify - Open Mbus Window - 2G - Mbus is required for the
+	 * training sequence
+	 */
+	{0x000200e8, 0x3fff0e01},
+	{0x00020184, 0x3fffffe0},	/* Close fast path Window to - 2G */
+
+	{0x0001504, 0x7fffffe1},	/* CS0 Size */
+	{0x000150C, 0x00000000},	/* CS1 Size */
+	{0x0001514, 0x00000000},	/* CS2 Size */
+	{0x000151C, 0x00000000},	/* CS3 Size */
+
+	{0x00020220, 0x00000007},	/* Reserved */
+
+	{0x00001538, 0x00000009},	/* Read Data Sample Delays Register */
+	{0x0000153C, 0x00000009},	/* Read Data Ready Delay Register */
+
+	{0x000015D0, 0x00000650},	/* MR0 */
+	{0x000015D4, 0x00000044},	/* MR1 */
+	{0x000015D8, 0x00000010},	/* MR2 */
+	{0x000015DC, 0x00000000},	/* MR3 */
+	{0x000015E0, 0x00000001},
+	{0x000015E4, 0x00203c18},	/* ZQDS Configuration Register */
+	{0x000015EC, 0xf800a225},	/* DDR PHY */
+
+	/* Recommended Settings from Marvell for 4 x 16 bit devices: */
+	{0x000014C0, 0x192424c9},	/* DRAM addr and Ctrl Driving Strenght*/
+	{0x000014C4, 0x0aaa24c9},	/* DRAM Data and DQS Driving Strenght */
+
+	{0x0, 0x0}
+};
+
+static MV_DRAM_MODES board_ddr_modes[MV_DDR3_MODES_NUMBER] = {
+	{"theadorable_1333-667", 0x3, 0x5, 0x0, A0, ddr3_theadorable,  NULL},
+};
+
+extern MV_SERDES_CHANGE_M_PHY serdes_change_m_phy[];
+
+/*
+ * Lane0 - PCIE0.0 X1 (to WIFI Module)
+ * Lane5 - SATA0
+ * Lane6 - SATA1
+ * Lane7 - SGMII0 (to Ethernet Phy)
+ * Lane8-11 - PCIE2.0 X4 (to PEX Switch)
+ * all other lanes are disabled
+ */
+MV_BIN_SERDES_CFG theadorable_serdes_cfg[] = {
+	{ MV_PEX_ROOT_COMPLEX, 0x22200001, 0x00001111,
+	  { PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4,
+	    PEX_BUS_DISABLED },
+	  0x0060, serdes_change_m_phy
+	},
+};
+
+MV_DRAM_MODES *ddr3_get_static_ddr_mode(void)
+{
+	/* Only one mode supported for this board */
+	return &board_ddr_modes[0];
+}
+
+MV_BIN_SERDES_CFG *board_serdes_cfg_get(u8 pex_mode)
+{
+	return &theadorable_serdes_cfg[0];
+}
+
+int board_early_init_f(void)
+{
+	/* Configure MPP */
+	writel(0x00000000, MVEBU_MPP_BASE + 0x00);
+	writel(0x03300000, MVEBU_MPP_BASE + 0x04);
+	writel(0x00000033, MVEBU_MPP_BASE + 0x08);
+	writel(0x00000000, MVEBU_MPP_BASE + 0x0c);
+	writel(0x11110000, MVEBU_MPP_BASE + 0x10);
+	writel(0x00221100, MVEBU_MPP_BASE + 0x14);
+	writel(0x00000000, MVEBU_MPP_BASE + 0x18);
+	writel(0x00000000, MVEBU_MPP_BASE + 0x1c);
+	writel(0x00000000, MVEBU_MPP_BASE + 0x20);
+
+	/* Configure GPIO */
+	writel(THEADORABLE_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
+	writel(THEADORABLE_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
+	writel(THEADORABLE_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00);
+	writel(THEADORABLE_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
+	writel(THEADORABLE_GPP_OUT_VAL_HIGH, MVEBU_GPIO2_BASE + 0x00);
+	writel(THEADORABLE_GPP_OUT_ENA_HIGH, MVEBU_GPIO2_BASE + 0x04);
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	puts("Board: theadorable\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_NET
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis); /* Built in controller(s) come first */
+	return pci_eth_init(bis);
+}
+#endif
+
+int board_video_init(void)
+{
+	struct mvebu_lcd_info lcd_info;
+
+	/* Reserved memory area via CONFIG_SYS_MEM_TOP_HIDE */
+	lcd_info.fb_base	= gd->ram_size;
+	lcd_info.x_res		= 240;
+	lcd_info.x_fp		= 1;
+	lcd_info.x_bp		= 45;
+	lcd_info.y_res		= 320;
+	lcd_info.y_fp		= 1;
+	lcd_info.y_bp		= 3;
+
+	return mvebu_lcd_register_init(&lcd_info);
+}