mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

5 files changed, 11 insertions, 11 deletions

diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 46b95c78657..3d7f73843c9 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -710,7 +710,7 @@ int board_init(void)
 #endif
 
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-#if defined(CONFIG_NOR) || defined(CONFIG_NAND)
+#if defined(CONFIG_NOR) || defined(CONFIG_MTD_RAW_NAND)
 	gpmc_init();
 #endif
 
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index 6e1ede39339..6fb2c009ba0 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -195,7 +195,7 @@ static struct module_pin_mux rmii1_pin_mux[] = {
 	{-1},
 };
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 static struct module_pin_mux nand_pin_mux[] = {
 	{OFFSET(gpmc_ad0),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD0  */
 	{OFFSET(gpmc_ad1),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD1  */
@@ -360,7 +360,7 @@ void enable_board_pin_mux(void)
 		/* Beaglebone pinmux */
 		configure_module_pin_mux(mii1_pin_mux);
 		configure_module_pin_mux(mmc0_pin_mux);
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
 		configure_module_pin_mux(nand_pin_mux);
 #elif defined(CONFIG_NOR)
 		configure_module_pin_mux(bone_norcape_pin_mux);
@@ -376,7 +376,7 @@ void enable_board_pin_mux(void)
 		if (profile & ~PROFILE_2)
 			configure_module_pin_mux(i2c1_pin_mux);
 		/* Profiles 2 & 3 don't have NAND */
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 		if (profile & ~(PROFILE_2 | PROFILE_3))
 			configure_module_pin_mux(nand_pin_mux);
 #endif
@@ -404,7 +404,7 @@ void enable_board_pin_mux(void)
 		}
 		/* Beaglebone LT pinmux */
 		configure_module_pin_mux(mmc0_pin_mux);
-#if defined(CONFIG_NAND) && defined(CONFIG_EMMC_BOOT)
+#if defined(CONFIG_MTD_RAW_NAND) && defined(CONFIG_EMMC_BOOT)
 		configure_module_pin_mux(nand_pin_mux);
 #elif defined(CONFIG_NOR) && defined(CONFIG_EMMC_BOOT)
 		configure_module_pin_mux(bone_norcape_pin_mux);
diff --git a/board/ti/am43xx/mux.c b/board/ti/am43xx/mux.c
index a61987e4c6a..f59e93a0ebb 100644
--- a/board/ti/am43xx/mux.c
+++ b/board/ti/am43xx/mux.c
@@ -73,7 +73,7 @@ static struct module_pin_mux gpio5_7_pin_mux[] = {
 	{-1},
 };
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 static struct module_pin_mux nand_pin_mux[] = {
 	{OFFSET(gpmc_ad0),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD0 */
 	{OFFSET(gpmc_ad1),	(MODE(0) | PULLUDDIS | RXACTIVE)}, /* AD1 */
@@ -128,18 +128,18 @@ void enable_board_pin_mux(void)
 	if (board_is_evm()) {
 		configure_module_pin_mux(gpio5_7_pin_mux);
 		configure_module_pin_mux(rgmii1_pin_mux);
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
 		configure_module_pin_mux(nand_pin_mux);
 #endif
 	} else if (board_is_sk() || board_is_idk()) {
 		configure_module_pin_mux(rgmii1_pin_mux);
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
 		printf("Error: NAND flash not present on this board\n");
 #endif
 		configure_module_pin_mux(qspi_pin_mux);
 	} else if (board_is_eposevm()) {
 		configure_module_pin_mux(rmii1_pin_mux);
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
 		configure_module_pin_mux(nand_pin_mux);
 #else
 		configure_module_pin_mux(qspi_pin_mux);
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 04e9b894d54..79b8363b868 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -784,7 +784,7 @@ void set_muxconf_regs(void)
 		     early_padconf, ARRAY_SIZE(early_padconf));
 }
 
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
 static int nand_sw_detect(void)
 {
 	int rc;
diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c
index 8f7b591b5c4..3896ebbfda2 100644
--- a/board/ti/ti816x/evm.c
+++ b/board/ti/ti816x/evm.c
@@ -25,7 +25,7 @@ DECLARE_GLOBAL_DATA_PTR;
 int board_init(void)
 {
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
 	gpmc_init();
 #endif
 	return 0;