diff options
| author | Anatolij Gustschin | 2019-03-18 23:29:42 +0100 |
|---|---|---|
| committer | Stefano Babic | 2019-04-13 20:30:09 +0200 |
| commit | a23ade6d2684908cf08de82536c4c3676a0d1015 (patch) | |
| tree | b77bb865d182f33fae67c584cd3549d5d85f119c /board/wandboard | |
| parent | 4f115e3b9bef1c4e2670c3e5e893d89cbd8e9af1 (diff) | |
imx6: wandboard: convert to DM_GPIO and enable pinctrl driver
Enable DM_GPIO and pinctrl in defconfig and add gpio_request()
calls where required.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Diffstat (limited to 'board/wandboard')
| -rw-r--r-- | board/wandboard/wandboard.c | 12 |
1 files changed, 12 insertions, 0 deletions
diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c index 6af1b458829..e0d57691314 100644 --- a/board/wandboard/wandboard.c +++ b/board/wandboard/wandboard.c @@ -131,12 +131,14 @@ static void setup_iomux_enet(void) if (with_pmic) { SETUP_IOMUX_PADS(enet_ar8035_power_pads); /* enable AR8035 POWER */ + gpio_request(ETH_PHY_AR8035_POWER, "PHY_POWER"); gpio_direction_output(ETH_PHY_AR8035_POWER, 0); } /* wait until 3.3V of PHY and clock become stable */ mdelay(10); /* Reset AR8031 PHY */ + gpio_request(ETH_PHY_RESET, "PHY_RESET"); gpio_direction_output(ETH_PHY_RESET, 0); mdelay(10); gpio_set_value(ETH_PHY_RESET, 1); @@ -170,6 +172,11 @@ int board_mmc_init(bd_t *bis) int ret; u32 index = 0; +#if !CONFIG_IS_ENABLED(DM_MMC) + gpio_request(USDHC1_CD_GPIO, "USDHC1_CD"); + gpio_request(USDHC3_CD_GPIO, "USDHC3_CD"); +#endif + /* * Following map is done: * (U-Boot device node) (Physical Port) @@ -356,6 +363,8 @@ static void enable_fwadapt_7wvga(struct display_info_t const *dev) { SETUP_IOMUX_PADS(fwadapt_7wvga_pads); + gpio_request(IMX_GPIO_NR(2, 10), "DISP0_BKLEN"); + gpio_request(IMX_GPIO_NR(2, 11), "DISP0_VDDEN"); gpio_direction_output(IMX_GPIO_NR(2, 10), 1); gpio_direction_output(IMX_GPIO_NR(2, 11), 1); } @@ -418,6 +427,7 @@ static void setup_display(void) /* Disable LCD backlight */ SETUP_IOMUX_PAD(PAD_DI0_PIN4__GPIO4_IO20); + gpio_request(IMX_GPIO_NR(4, 20), "LCD_BKLEN"); gpio_direction_input(IMX_GPIO_NR(4, 20)); } #endif /* CONFIG_VIDEO_IPUV3 */ @@ -548,6 +558,8 @@ int board_init(void) int checkboard(void) { + gpio_request(REV_DETECTION, "REV_DETECT"); + if (is_revd1()) puts("Board: Wandboard rev D1\n"); else if (is_revc1()) |