arm: Remove polaris and trizepsiv boards

These boards have not been converted to generic board by the deadline.
Remove them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Stefano Babic <sbabic@denx.de>

5 files changed, 0 insertions, 234 deletions

diff --git a/board/trizepsiv/Kconfig b/board/trizepsiv/Kconfig
deleted file mode 100644
index 56b255709a2..00000000000
--- a/board/trizepsiv/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_TRIZEPSIV
-
-config SYS_BOARD
-	default "trizepsiv"
-
-config SYS_CONFIG_NAME
-	default "trizepsiv"
-
-endif
diff --git a/board/trizepsiv/MAINTAINERS b/board/trizepsiv/MAINTAINERS
deleted file mode 100644
index ba48c2e2e0d..00000000000
--- a/board/trizepsiv/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-TRIZEPSIV BOARD
-M:	Stefano Babic <sbabic@denx.de>
-S:	Maintained
-F:	board/trizepsiv/
-F:	include/configs/trizepsiv.h
-F:	configs/polaris_defconfig
-F:	configs/trizepsiv_defconfig
diff --git a/board/trizepsiv/Makefile b/board/trizepsiv/Makefile
deleted file mode 100644
index c49686fc608..00000000000
--- a/board/trizepsiv/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= conxs.o eeprom.o
diff --git a/board/trizepsiv/conxs.c b/board/trizepsiv/conxs.c
deleted file mode 100644
index 1ddf05dcdd4..00000000000
--- a/board/trizepsiv/conxs.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefano Babic, DENX Gmbh, sbabic@denx.de
- *
- * (C) Copyright 2004
- * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa.h>
-#include <asm/arch/regs-mmc.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <usb.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define		RH_A_PSM	(1 << 8)	/* power switching mode */
-#define		RH_A_NPS	(1 << 9)	/* no power switching */
-
-extern struct serial_device serial_ffuart_device;
-extern struct serial_device serial_btuart_device;
-extern struct serial_device serial_stuart_device;
-
-#if CONFIG_MK_POLARIS
-#define BOOT_CONSOLE	"serial_stuart"
-#else
-#define BOOT_CONSOLE	"serial_ffuart"
-#endif
-/* ------------------------------------------------------------------------- */
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_usb_init(int index, enum usb_init_type init)
-{
-	writel((readl(UHCHR) | UHCHR_PCPL | UHCHR_PSPL) &
-		~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
-		UHCHR);
-
-	writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
-
-	while (readl(UHCHR) & UHCHR_FSBIR)
-		;
-
-	writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR);
-	writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE);
-
-	/* Clear any OTG Pin Hold */
-	if (readl(PSSR) & PSSR_OTGPH)
-		writel(readl(PSSR) | PSSR_OTGPH, PSSR);
-
-	writel(readl(UHCRHDA) & ~(RH_A_NPS), UHCRHDA);
-	writel(readl(UHCRHDA) | RH_A_PSM, UHCRHDA);
-
-	/* Set port power control mask bits, only 3 ports. */
-	writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB);
-
-	return 0;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
-	return 0;
-}
-
-void usb_board_stop(void)
-{
-	writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
-	udelay(11);
-	writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
-
-	writel(readl(UHCCOMS) | 1, UHCCOMS);
-	udelay(10);
-
-	writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
-
-	return;
-}
-
-int board_init (void)
-{
-	/* We have RAM, disable cache */
-	dcache_disable();
-	icache_disable();
-
-	/* arch number of ConXS Board */
-	gd->bd->bi_arch_number = 776;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0xa000003c;
-
-	return 0;
-}
-
-int board_late_init(void)
-{
-	char *console=getenv("boot_console");
-
-	if ((console == NULL) || (strcmp(console,"serial_btuart") &&
-		strcmp(console,"serial_stuart") &&
-		strcmp(console,"serial_ffuart"))) {
-			console = BOOT_CONSOLE;
-	}
-	setenv("stdout",console);
-	setenv("stdin", console);
-	setenv("stderr",console);
-	return 0;
-}
-
-int dram_init(void)
-{
-	pxa2xx_dram_init();
-	gd->ram_size = PHYS_SDRAM_1_SIZE;
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
-#ifdef CONFIG_DRIVER_DM9000
-int board_eth_init(bd_t *bis)
-{
-	return dm9000_initialize(bis);
-}
-#endif
-
-#ifdef CONFIG_CMD_MMC
-int board_mmc_init(bd_t *bis)
-{
-	pxa_mmc_register(0);
-	return 0;
-}
-#endif
diff --git a/board/trizepsiv/eeprom.c b/board/trizepsiv/eeprom.c
deleted file mode 100644
index 1318edc5d63..00000000000
--- a/board/trizepsiv/eeprom.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <dm9000.h>
-
-static int do_read_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) {
-	unsigned int i;
-	u8 data[2];
-
-	for (i=0; i < 0x40; i++) {
-		if (!(i % 0x10))
-			printf("\n%08x:", i);
-		dm9000_read_srom_word(i, data);
-		printf(" %02x%02x", data[1], data[0]);
-	}
-	printf ("\n");
-	return (0);
-}
-
-static int do_write_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) {
-	int offset,value;
-
-	if (argc < 4)
-		return cmd_usage(cmdtp);
-
-	offset=simple_strtoul(argv[2],NULL,16);
-	value=simple_strtoul(argv[3],NULL,16);
-	if (offset > 0x40) {
-		printf("Wrong offset : 0x%x\n",offset);
-		return cmd_usage(cmdtp);
-	}
-	dm9000_write_srom_word(offset, value);
-	return (0);
-}
-
-int do_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) {
-	if (argc < 2)
-		return cmd_usage(cmdtp);
-
-	if (strcmp (argv[1],"read") == 0)
-		return (do_read_dm9000_eeprom(cmdtp,flag,argc,argv));
-	else if (strcmp (argv[1],"write") == 0)
-		return (do_write_dm9000_eeprom(cmdtp,flag,argc,argv));
-	else
-		return cmd_usage(cmdtp);
-}
-
-U_BOOT_CMD(
-	dm9000ee,4,1,do_dm9000_eeprom,
-	"Read/Write eeprom connected to Ethernet Controller",
-	"\ndm9000ee write <word offset> <value> \n"
-	"\tdm9000ee read \n"
-	"\tword:\t\t00-02 : MAC Address\n"
-	"\t\t\t03-07 : DM9000 Configuration\n"
-	"\t\t\t08-63 : User data"
-);