powerpc: mpc8260ads: remove orphan board

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

3 files changed, 0 insertions, 1028 deletions

diff --git a/board/freescale/mpc8260ads/Makefile b/board/freescale/mpc8260ads/Makefile
deleted file mode 100644
index 007d9580aee..00000000000
--- a/board/freescale/mpc8260ads/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= mpc8260ads.o flash.o
diff --git a/board/freescale/mpc8260ads/flash.c b/board/freescale/mpc8260ads/flash.c
deleted file mode 100644
index 4012d458684..00000000000
--- a/board/freescale/mpc8260ads/flash.c
+++ /dev/null
@@ -1,476 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
- * Add support the Sharp chips on the mpc8260ads.
- * I started with board/ip860/flash.c and made changes I found in
- * the MTD project by David Schleef.
- *
- * (C) Copyright 2003 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- * Re-written to support multi-bank flash SIMMs.
- * Added support for real protection and JFFS2.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-
-/* Intel-compatible flash ID */
-#define INTEL_COMPAT  0x89898989
-#define INTEL_ALT     0xB0B0B0B0
-
-/* Intel-compatible flash commands */
-#define INTEL_PROGRAM 0x10101010
-#define INTEL_ERASE   0x20202020
-#define INTEL_CLEAR   0x50505050
-#define INTEL_LOCKBIT 0x60606060
-#define INTEL_PROTECT 0x01010101
-#define INTEL_STATUS  0x70707070
-#define INTEL_READID  0x90909090
-#define INTEL_CONFIRM 0xD0D0D0D0
-#define INTEL_RESET   0xFFFFFFFF
-
-/* Intel-compatible flash status bits */
-#define INTEL_FINISHED 0x80808080
-#define INTEL_OK       0x80808080
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * This board supports 32-bit wide flash SIMMs (4x8-bit configuration.)
- * Up to 32MB of flash supported (up to 4 banks.)
- * BCSR is used for flash presence detect (page 4-65 of the User's Manual)
- *
- * The following code can not run from flash!
- */
-unsigned long flash_init (void)
-{
-	ulong size = 0, sect_start, sect_size = 0, bank_size;
-	ushort sect_count = 0;
-	int i, j, nbanks;
-	vu_long *addr = (vu_long *)CONFIG_SYS_FLASH_BASE;
-	vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR;
-
-	switch (bcsr[2] & 0xF) {
-	case 0:
-		nbanks = 4;
-		break;
-	case 1:
-		nbanks = 2;
-		break;
-	case 2:
-		nbanks = 1;
-		break;
-	default:		/* Unsupported configurations */
-		nbanks = CONFIG_SYS_MAX_FLASH_BANKS;
-	}
-
-	if (nbanks > CONFIG_SYS_MAX_FLASH_BANKS)
-		nbanks = CONFIG_SYS_MAX_FLASH_BANKS;
-
-	for (i = 0; i < nbanks; i++) {
-		*addr = INTEL_READID;	/* Read Intelligent Identifier */
-		if ((addr[0] == INTEL_COMPAT) || (addr[0] == INTEL_ALT)) {
-			switch (addr[1]) {
-			case SHARP_ID_28F016SCL:
-			case SHARP_ID_28F016SCZ:
-				flash_info[i].flash_id = FLASH_MAN_SHARP | FLASH_LH28F016SCT;
-				sect_count = 32;
-				sect_size = 0x40000;
-				break;
-			default:
-				flash_info[i].flash_id = FLASH_UNKNOWN;
-				sect_count = CONFIG_SYS_MAX_FLASH_SECT;
-				sect_size =
-				   CONFIG_SYS_FLASH_SIZE / CONFIG_SYS_MAX_FLASH_BANKS / CONFIG_SYS_MAX_FLASH_SECT;
-			}
-		}
-		else
-			flash_info[i].flash_id = FLASH_UNKNOWN;
-		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
-			printf("### Unknown flash ID %08lX %08lX at address %08lX ###\n",
-			       addr[0], addr[1], (ulong)addr);
-			size = 0;
-			*addr = INTEL_RESET; /* Reset bank to Read Array mode */
-			break;
-		}
-		flash_info[i].sector_count = sect_count;
-		flash_info[i].size = bank_size = sect_size * sect_count;
-		size += bank_size;
-		sect_start = (ulong)addr;
-		for (j = 0; j < sect_count; j++) {
-			addr = (vu_long *)sect_start;
-			flash_info[i].start[j]   = sect_start;
-			flash_info[i].protect[j] = (addr[2] == 0x01010101);
-			sect_start += sect_size;
-		}
-		*addr = INTEL_RESET; /* Reset bank to Read Array mode */
-		addr = (vu_long *)sect_start;
-	}
-
-	if (size == 0) {	/* Unknown flash, fill with hard-coded values */
-		sect_start = CONFIG_SYS_FLASH_BASE;
-		for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-			flash_info[i].flash_id = FLASH_UNKNOWN;
-			flash_info[i].size = CONFIG_SYS_FLASH_SIZE / CONFIG_SYS_MAX_FLASH_BANKS;
-			flash_info[i].sector_count = sect_count;
-			for (j = 0; j < sect_count; j++) {
-				flash_info[i].start[j]   = sect_start;
-				flash_info[i].protect[j] = 0;
-				sect_start += sect_size;
-			}
-		}
-		size = CONFIG_SYS_FLASH_SIZE;
-	}
-	else
-		for (i = nbanks; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-			flash_info[i].flash_id = FLASH_UNKNOWN;
-			flash_info[i].size = 0;
-			flash_info[i].sector_count = 0;
-		}
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_SYS_MONITOR_BASE,
-		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-		      &flash_info[0]);
-#endif
-
-#ifdef	CONFIG_ENV_IS_IN_FLASH
-	/* ENV protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_ENV_ADDR,
-		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
-		      &flash_info[0]);
-#endif
-	return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_INTEL:	printf ("Intel ");		break;
-	case FLASH_MAN_SHARP:   printf ("Sharp ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F016SV:	printf ("28F016SV (16 Mbit, 32 x 64k)\n");
-				break;
-	case FLASH_28F160S3:	printf ("28F160S3 (16 Mbit, 32 x 512K)\n");
-				break;
-	case FLASH_28F320S3:	printf ("28F320S3 (32 Mbit, 64 x 512K)\n");
-				break;
-	case FLASH_LH28F016SCT: printf ("28F016SC (16 Mbit, 32 x 64K)\n");
-				break;
-	default:		printf ("Unknown Chip Type\n");
-				break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
-	}
-	printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	int flag, prot, sect;
-	ulong start, now, last;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if (    ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL)
-	     && ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_SHARP) ) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			vu_long *addr = (vu_long *)(info->start[sect]);
-
-			last = start = get_timer (0);
-
-			/* Disable interrupts which might cause a timeout here */
-			flag = disable_interrupts();
-
-			/* Clear Status Register */
-			*addr = INTEL_CLEAR;
-			/* Single Block Erase Command */
-			*addr = INTEL_ERASE;
-			/* Confirm */
-			*addr = INTEL_CONFIRM;
-
-			if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) {
-			    /* Resume Command, as per errata update */
-			    *addr = INTEL_CONFIRM;
-			}
-
-			/* re-enable interrupts if necessary */
-			if (flag)
-				enable_interrupts();
-
-			while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
-				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-					printf ("Timeout\n");
-					*addr = INTEL_RESET;	/* reset bank */
-					return 1;
-				}
-				/* show that we're waiting */
-				if ((now - last) > 1000) {	/* every second */
-					putc ('.');
-					last = now;
-				}
-			}
-
-			if (*addr != INTEL_OK) {
-				printf("Block erase failed at %08X, CSR=%08X\n",
-				       (uint)addr, (uint)*addr);
-				*addr = INTEL_RESET;	/* reset bank */
-				return 1;
-			}
-
-			/* reset to read mode */
-			*addr = INTEL_RESET;
-		}
-	}
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-	ulong start;
-	int rc = 0;
-	int flag;
-	vu_long *addr = (vu_long *)dest;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data) {
-		return (2);
-	}
-
-	*addr = INTEL_CLEAR; /* Clear status register */
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	/* Write Command */
-	*addr = INTEL_PROGRAM;
-
-	/* Write Data */
-	*addr = data;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* data polling for D7 */
-	start = get_timer (0);
-	while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			printf("Write timed out\n");
-			rc = 1;
-			break;
-		}
-	}
-	if (*addr != INTEL_OK) {
-		printf ("Write failed at %08X, CSR=%08X\n", (uint)addr, (uint)*addr);
-		rc = 1;
-	}
-
-	*addr = INTEL_RESET; /* Reset to read array mode */
-
-	return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	*(vu_long *)wp = INTEL_RESET; /* Reset to read array mode */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-		for (; i<4 && cnt>0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i=0; i<4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i<4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
-	}
-
-	rc = write_word(info, wp, data);
-
-	return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Set/Clear sector's lock bit, returns:
- * 0 - OK
- * 1 - Error (timeout, voltage problems, etc.)
- */
-int flash_real_protect(flash_info_t *info, long sector, int prot)
-{
-	ulong start;
-	int i;
-	int rc = 0;
-	vu_long *addr = (vu_long *)(info->start[sector]);
-	int flag = disable_interrupts();
-
-	*addr = INTEL_CLEAR;	/* Clear status register */
-	if (prot) {			/* Set sector lock bit */
-		*addr = INTEL_LOCKBIT;	/* Sector lock bit */
-		*addr = INTEL_PROTECT;	/* set */
-	}
-	else {				/* Clear sector lock bit */
-		*addr = INTEL_LOCKBIT;	/* All sectors lock bits */
-		*addr = INTEL_CONFIRM;	/* clear */
-	}
-
-	start = get_timer(0);
-	while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) {
-			printf("Flash lock bit operation timed out\n");
-			rc = 1;
-			break;
-		}
-	}
-
-	if (*addr != INTEL_OK) {
-		printf("Flash lock bit operation failed at %08X, CSR=%08X\n",
-		       (uint)addr, (uint)*addr);
-		rc = 1;
-	}
-
-	if (!rc)
-		info->protect[sector] = prot;
-
-	/*
-	 * Clear lock bit command clears all sectors lock bits, so
-	 * we have to restore lock bits of protected sectors.
-	 */
-	if (!prot)
-		for (i = 0; i < info->sector_count; i++)
-			if (info->protect[i]) {
-				addr = (vu_long *)(info->start[i]);
-				*addr = INTEL_LOCKBIT;	/* Sector lock bit */
-				*addr = INTEL_PROTECT;	/* set */
-				udelay(CONFIG_SYS_FLASH_LOCK_TOUT * 1000);
-			}
-
-	if (flag)
-		enable_interrupts();
-
-	*addr = INTEL_RESET;		/* Reset to read array mode */
-
-	return rc;
-}
diff --git a/board/freescale/mpc8260ads/mpc8260ads.c b/board/freescale/mpc8260ads/mpc8260ads.c
deleted file mode 100644
index b8c8ce9603e..00000000000
--- a/board/freescale/mpc8260ads/mpc8260ads.c
+++ /dev/null
@@ -1,544 +0,0 @@
-/*
- * (C) Copyright 2001-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Modified during 2001 by
- * Advanced Communications Technologies (Australia) Pty. Ltd.
- * Howard Walker, Tuong Vu-Dinh
- *
- * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
- * Added support for the 16M dram simm on the 8260ads boards
- *
- * (C) Copyright 2003-2004 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- * Added support for SDRAM DIMMs SPD EEPROM, MII, Ethernet PHY init.
- *
- * Copyright (c) 2005 MontaVista Software, Inc.
- * Vitaly Bordug <vbordug@ru.mvista.com>
- * Added support for PCI.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc8260.h>
-#include <asm/m8260_pci.h>
-#include <i2c.h>
-#include <spd.h>
-#include <miiphy.h>
-#ifdef CONFIG_PCI
-#include <pci.h>
-#endif
-#ifdef CONFIG_OF_LIBFDT
-#include <libfdt.h>
-#include <fdt_support.h>
-#endif
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-#define CONFIG_SYS_FCC1 (CONFIG_ETHER_INDEX == 1)
-#define CONFIG_SYS_FCC2 (CONFIG_ETHER_INDEX == 2)
-#define CONFIG_SYS_FCC3 (CONFIG_ETHER_INDEX == 3)
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A configuration */
-    {	/*	      conf      ppar psor pdir podr pdat */
-	/* PA31 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII COL   */
-	/* PA30 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII CRS   */
-	/* PA29 */ { CONFIG_SYS_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_ER */
-	/* PA28 */ { CONFIG_SYS_FCC1,   1,   1,   1,   0,   0 }, /* FCC1 MII TX_EN */
-	/* PA27 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_DV */
-	/* PA26 */ { CONFIG_SYS_FCC1,   1,   1,   0,   0,   0 }, /* FCC1 MII RX_ER */
-	/* PA25 */ { 0,          0,   0,   0,   0,   0 }, /* PA25 */
-	/* PA24 */ { 0,          0,   0,   0,   0,   0 }, /* PA24 */
-	/* PA23 */ { 0,          0,   0,   0,   0,   0 }, /* PA23 */
-	/* PA22 */ { 0,          0,   0,   0,   0,   0 }, /* PA22 */
-	/* PA21 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[3] */
-	/* PA20 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[2] */
-	/* PA19 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[1] */
-	/* PA18 */ { CONFIG_SYS_FCC1,   1,   0,   1,   0,   0 }, /* FCC1 MII TxD[0] */
-	/* PA17 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[0] */
-	/* PA16 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[1] */
-	/* PA15 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[2] */
-	/* PA14 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII RxD[3] */
-	/* PA13 */ { 0,          0,   0,   0,   0,   0 }, /* PA13 */
-	/* PA12 */ { 0,          0,   0,   0,   0,   0 }, /* PA12 */
-	/* PA11 */ { 0,          0,   0,   0,   0,   0 }, /* PA11 */
-	/* PA10 */ { 0,          0,   0,   0,   0,   0 }, /* PA10 */
-	/* PA9  */ { 0,          0,   0,   0,   0,   0 }, /* PA9 */
-	/* PA8  */ { 0,          0,   0,   0,   0,   0 }, /* PA8 */
-	/* PA7  */ { 0,          0,   0,   1,   0,   0 }, /* PA7 */
-	/* PA6  */ { 0,          0,   0,   0,   0,   0 }, /* PA6 */
-	/* PA5  */ { 0,          0,   0,   1,   0,   0 }, /* PA5 */
-	/* PA4  */ { 0,          0,   0,   1,   0,   0 }, /* PA4 */
-	/* PA3  */ { 0,          0,   0,   1,   0,   0 }, /* PA3 */
-	/* PA2  */ { 0,          0,   0,   1,   0,   0 }, /* PA2 */
-	/* PA1  */ { 0,          0,   0,   0,   0,   0 }, /* PA1 */
-	/* PA0  */ { 0,          0,   0,   1,   0,   0 }  /* PA0 */
-    },
-
-    /* Port B configuration */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PB31 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TX_ER */
-	/* PB30 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_DV */
-	/* PB29 */ { CONFIG_SYS_FCC2,   1,   1,   1,   0,   0 }, /* FCC2 MII TX_EN */
-	/* PB28 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RX_ER */
-	/* PB27 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII COL */
-	/* PB26 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII CRS */
-	/* PB25 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[3] */
-	/* PB24 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[2] */
-	/* PB23 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[1] */
-	/* PB22 */ { CONFIG_SYS_FCC2,   1,   0,   1,   0,   0 }, /* FCC2 MII TxD[0] */
-	/* PB21 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[0] */
-	/* PB20 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[1] */
-	/* PB19 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[2] */
-	/* PB18 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII RxD[3] */
-	/* PB17 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RX_DIV */
-	/* PB16 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RX_ERR */
-	/* PB15 */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TX_ERR */
-	/* PB14 */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TX_EN */
-	/* PB13 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:COL */
-	/* PB12 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:CRS */
-	/* PB11 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
-	/* PB10 */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
-	/* PB9  */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
-	/* PB8  */ { CONFIG_SYS_FCC3,   1,   0,   0,   0,   0 }, /* FCC3:RXD */
-	/* PB7  */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
-	/* PB6  */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
-	/* PB5  */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
-	/* PB4  */ { CONFIG_SYS_FCC3,   1,   0,   1,   0,   0 }, /* FCC3:TXD */
-	/* PB3  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
-	/* PB2  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
-	/* PB1  */ { 0,          0,   0,   0,   0,   0 }, /* pin doesn't exist */
-	/* PB0  */ { 0,          0,   0,   0,   0,   0 }  /* pin doesn't exist */
-    },
-
-    /* Port C */
-    {   /*	      conf      ppar psor pdir podr pdat */
-	/* PC31 */ { 0,          0,   0,   0,   0,   0 }, /* PC31 */
-	/* PC30 */ { 0,          0,   0,   0,   0,   0 }, /* PC30 */
-	/* PC29 */ { 0,          0,   0,   0,   0,   0 }, /* PC29 */
-	/* PC28 */ { 0,          0,   0,   0,   0,   0 }, /* PC28 */
-	/* PC27 */ { 0,          0,   0,   0,   0,   0 }, /* PC27 */
-	/* PC26 */ { 0,          0,   0,   0,   0,   0 }, /* PC26 */
-	/* PC25 */ { 0,          0,   0,   0,   0,   0 }, /* PC25 */
-	/* PC24 */ { 0,          0,   0,   0,   0,   0 }, /* PC24 */
-	/* PC23 */ { 0,          0,   0,   0,   0,   0 }, /* PC23 */
-	/* PC22 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII Tx Clock (CLK10) */
-	/* PC21 */ { CONFIG_SYS_FCC1,   1,   0,   0,   0,   0 }, /* FCC1 MII Rx Clock (CLK11) */
-	/* PC20 */ { 0,          0,   0,   0,   0,   0 }, /* PC20 */
-#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
-	/* PC19 */ { 1,          0,   0,   1,   0,   0 }, /* FETHMDC  */
-	/* PC18 */ { 1,          0,   0,   0,   0,   0 }, /* FETHMDIO */
-	/* PC17 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Rx Clock (CLK15) */
-	/* PC16 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Tx Clock (CLK16) */
-#else
-	/* PC19 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Rx Clock (CLK13) */
-	/* PC18 */ { CONFIG_SYS_FCC2,   1,   0,   0,   0,   0 }, /* FCC2 MII Tx Clock (CLK14) */
-	/* PC17 */ { 0,          0,   0,   0,   0,   0 }, /* PC17 */
-	/* PC16 */ { 0,          0,   0,   0,   0,   0 }, /* PC16 */
-#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
-	/* PC15 */ { 0,          0,   0,   0,   0,   0 }, /* PC15 */
-	/* PC14 */ { 0,          0,   0,   0,   0,   0 }, /* PC14 */
-	/* PC13 */ { 0,          0,   0,   0,   0,   0 }, /* PC13 */
-	/* PC12 */ { 0,          0,   0,   0,   0,   0 }, /* PC12 */
-	/* PC11 */ { 0,          0,   0,   0,   0,   0 }, /* PC11 */
-#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
-	/* PC10 */ { 0,          0,   0,   0,   0,   0 }, /* PC10 */
-	/* PC9  */ { 0,          0,   0,   0,   0,   0 }, /* PC9  */
-#else
-	/* PC10 */ { 1,          0,   0,   1,   0,   0 }, /* FETHMDC  */
-	/* PC9  */ { 1,          0,   0,   0,   0,   0 }, /* FETHMDIO */
-#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
-	/* PC8  */ { 0,          0,   0,   0,   0,   0 }, /* PC8 */
-	/* PC7  */ { 0,          0,   0,   0,   0,   0 }, /* PC7 */
-	/* PC6  */ { 0,          0,   0,   0,   0,   0 }, /* PC6 */
-	/* PC5  */ { 0,          0,   0,   0,   0,   0 }, /* PC5 */
-	/* PC4  */ { 0,          0,   0,   0,   0,   0 }, /* PC4 */
-	/* PC3  */ { 0,          0,   0,   0,   0,   0 }, /* PC3 */
-	/* PC2  */ { 0,          0,   0,   0,   0,   0 }, /* PC2 */
-	/* PC1  */ { 0,          0,   0,   0,   0,   0 }, /* PC1 */
-	/* PC0  */ { 0,          0,   0,   0,   0,   0 }, /* PC0 */
-    },
-
-    /* Port D */
-    {   /*	      conf ppar psor pdir podr pdat */
-	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 UART RxD */
-	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 UART TxD */
-	/* PD29 */ {   0,   0,   0,   0,   0,   0   }, /* PD29 */
-	/* PD28 */ {   0,   1,   0,   0,   0,   0   }, /* PD28 */
-	/* PD27 */ {   0,   1,   1,   1,   0,   0   }, /* PD27 */
-	/* PD26 */ {   0,   0,   0,   1,   0,   0   }, /* PD26 */
-	/* PD25 */ {   0,   0,   0,   1,   0,   0   }, /* PD25 */
-	/* PD24 */ {   0,   0,   0,   1,   0,   0   }, /* PD24 */
-	/* PD23 */ {   0,   0,   0,   1,   0,   0   }, /* PD23 */
-	/* PD22 */ {   0,   0,   0,   1,   0,   0   }, /* PD22 */
-	/* PD21 */ {   0,   0,   0,   1,   0,   0   }, /* PD21 */
-	/* PD20 */ {   0,   0,   0,   1,   0,   0   }, /* PD20 */
-	/* PD19 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
-	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD18 */
-	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
-	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
-	/* PD15 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SCL */
-	/* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
-	/* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
-	/* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
-	/* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
-	/* PD9  */ {   0,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
-	/* PD8  */ {   0,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
-	/* PD7  */ {   0,   0,   0,   1,   0,   1   }, /* PD7 */
-	/* PD6  */ {   0,   0,   0,   1,   0,   1   }, /* PD6 */
-	/* PD5  */ {   0,   0,   0,   1,   0,   1   }, /* PD5 */
-	/* PD4  */ {   0,   0,   0,   1,   0,   1   }, /* PD4 */
-	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    }
-};
-
-void reset_phy (void)
-{
-	vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR;
-
-	/* Reset the PHY */
-#if CONFIG_SYS_PHY_ADDR == 0
-	bcsr[1] &= ~(FETHIEN1 | FETH1_RST);
-	udelay(2);
-	bcsr[1] |=  FETH1_RST;
-#else
-	bcsr[3] &= ~(FETHIEN2 | FETH2_RST);
-	udelay(2);
-	bcsr[3] |=  FETH2_RST;
-#endif /* CONFIG_SYS_PHY_ADDR == 0 */
-	udelay(1000);
-#ifdef CONFIG_MII
-#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
-	/*
-	 * Do not bypass Rx/Tx (de)scrambler (fix configuration error)
-	 * Enable autonegotiation.
-	 */
-	bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, 16, 0x610);
-	bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_BMCR,
-			BMCR_ANENABLE | BMCR_ANRESTART);
-#else
-	/*
-	 * Ethernet PHY is configured (by means of configuration pins)
-	 * to work at 10Mb/s only. We reconfigure it using MII
-	 * to advertise all capabilities, including 100Mb/s, and
-	 * restart autonegotiation.
-	 */
-
-	/* Advertise all capabilities */
-	bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_ADVERTISE, 0x01E1);
-
-	/* Do not bypass Rx/Tx (de)scrambler */
-	bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_FCSCOUNTER,  0x0000);
-
-	bb_miiphy_write(NULL, CONFIG_SYS_PHY_ADDR, MII_BMCR,
-			BMCR_ANENABLE | BMCR_ANRESTART);
-#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */
-#endif /* CONFIG_MII */
-}
-
-#ifdef CONFIG_PCI
-typedef struct pci_ic_s {
-	unsigned long pci_int_stat;
-	unsigned long pci_int_mask;
-}pci_ic_t;
-#endif
-
-int board_early_init_f (void)
-{
-	vu_long *bcsr = (vu_long *)CONFIG_SYS_BCSR;
-
-#ifdef CONFIG_PCI
-	volatile pci_ic_t* pci_ic = (pci_ic_t *) CONFIG_SYS_PCI_INT;
-
-	/* mask alll the PCI interrupts */
-	pci_ic->pci_int_mask |= 0xfff00000;
-#endif
-#if (CONFIG_CONS_INDEX == 1) || (CONFIG_KGDB_INDEX == 1)
-	bcsr[1] &= ~RS232EN_1;
-#endif
-#if (CONFIG_CONS_INDEX > 1) || (CONFIG_KGDB_INDEX > 1)
-	bcsr[1] &= ~RS232EN_2;
-#endif
-
-#if CONFIG_ADSTYPE != CONFIG_SYS_8260ADS /* PCI mode can be selected */
-#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
-	if ((bcsr[3] & BCSR_PCI_MODE) == 0) /* PCI mode selected by JP9 */
-#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */
-	{
-		volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
-		immap->im_clkrst.car_sccr |= M826X_SCCR_PCI_MODE_EN;
-		immap->im_siu_conf.sc_siumcr =
-			(immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
-			| SIUMCR_LBPC01;
-	}
-#endif /* CONFIG_ADSTYPE != CONFIG_SYS_8260ADS */
-
-	return 0;
-}
-
-#define ns2clk(ns) (ns / (1000000000 / CONFIG_8260_CLKIN) + 1)
-
-phys_size_t initdram (int board_type)
-{
-#if   CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
-	long int msize = 32;
-#elif CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
-	long int msize = 64;
-#else
-	long int msize = 16;
-#endif
-
-#ifndef CONFIG_SYS_RAMBOOT
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8260_t *memctl = &immap->im_memctl;
-	volatile uchar *ramaddr, c = 0xff;
-	uint or;
-	uint psdmr;
-	uint psrt;
-
-	int i;
-
-	immap->im_siu_conf.sc_ppc_acr  = 0x00000002;
-	immap->im_siu_conf.sc_ppc_alrh = 0x01267893;
-	immap->im_siu_conf.sc_tescr1   = 0x00004000;
-
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-#ifdef CONFIG_SYS_LSDRAM_BASE
-	/*
-	  Initialise local bus SDRAM only if the pins
-	  are configured as local bus pins and not as PCI.
-	  The configuration is determined by the HRCW.
-	*/
-	if ((immap->im_siu_conf.sc_siumcr & SIUMCR_LBPC11) == SIUMCR_LBPC00) {
-		memctl->memc_lsrt  = CONFIG_SYS_LSRT;
-#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS /* CS3 */
-		memctl->memc_or3   = 0xFF803280;
-		memctl->memc_br3   = CONFIG_SYS_LSDRAM_BASE | 0x00001861;
-#else				  /* CS4 */
-		memctl->memc_or4   = 0xFFC01480;
-		memctl->memc_br4   = CONFIG_SYS_LSDRAM_BASE | 0x00001861;
-#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */
-		memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x28000000;
-		ramaddr = (uchar *) CONFIG_SYS_LSDRAM_BASE;
-		*ramaddr = c;
-		memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x08000000;
-		for (i = 0; i < 8; i++)
-			*ramaddr = c;
-		memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x18000000;
-		*ramaddr = c;
-		memctl->memc_lsdmr = CONFIG_SYS_LSDMR | 0x40000000;
-	}
-#endif /* CONFIG_SYS_LSDRAM_BASE */
-
-	/* Init 60x bus SDRAM */
-#ifdef CONFIG_SPD_EEPROM
-	{
-		spd_eeprom_t spd;
-		uint pbi, bsel, rowst, lsb, tmp;
-
-		i2c_read (CONFIG_SPD_ADDR, 0, 1, (uchar *) & spd, sizeof (spd));
-
-		/* Bank-based interleaving is not supported for physical bank
-		   sizes greater than 128MB which is encoded as 0x20 in SPD
-		 */
-		pbi = (spd.row_dens > 32) ? 1 : CONFIG_SDRAM_PBI;
-		msize = spd.nrows * (4 * spd.row_dens);	/* Mixed size not supported */
-		or = ~(msize - 1) << 20;	/* SDAM */
-		switch (spd.nbanks) {	/* BPD */
-		case 2:
-			bsel = 1;
-			break;
-		case 4:
-			bsel = 2;
-			or |= 0x00002000;
-			break;
-		case 8:
-			bsel = 3;
-			or |= 0x00004000;
-			break;
-		}
-		lsb = 3;	/* For 64-bit port, lsb is 3 bits */
-
-		if (pbi) {	/* Bus partition depends on interleaving */
-			rowst = 32 - (spd.nrow_addr + spd.ncol_addr + bsel + lsb);
-			or |= (rowst << 9);	/* ROWST */
-		} else {
-			rowst = 32 - (spd.nrow_addr + spd.ncol_addr + lsb);
-			or |= ((rowst * 2 - 12) << 9);	/* ROWST */
-		}
-		or |= ((spd.nrow_addr - 9) << 6);	/* NUMR */
-
-		psdmr = (pbi << 31);	/* PBI */
-		/* Bus multiplexing parameters */
-		tmp = 32 - (lsb + spd.nrow_addr);	/* Tables 10-19 and 10-20 */
-		psdmr |= ((tmp - (rowst - 5) - 13) << 24);	/* SDAM */
-		psdmr |= ((tmp - 3 - 12) << 21);	/* BSMA */
-
-		tmp = (31 - lsb - 10) - tmp;
-		/* Pin connected to SDA10 is (31 - lsb - 10).
-		   rowst is multiplexed over (32 - (lsb + spd.nrow_addr)),
-		   so (rowst + tmp) alternates with AP.
-		 */
-		if (pbi)				/* Table 10-7 */
-			psdmr |= ((10 - (rowst + tmp)) << 18);	/* SDA10 */
-		else
-			psdmr |= ((12 - (rowst + tmp)) << 18);	/* SDA10 */
-
-		/* SDRAM device-specific parameters */
-		tmp = ns2clk (70);	/* Refresh recovery is not in SPD, so assume 70ns */
-		switch (tmp) {		/* RFRC */
-		case 1:
-		case 2:
-			psdmr |= (1 << 15);
-			break;
-		case 3:
-		case 4:
-		case 5:
-		case 6:
-		case 7:
-		case 8:
-			psdmr |= ((tmp - 2) << 15);
-			break;
-		default:
-			psdmr |= (7 << 15);
-		}
-		psdmr |= (ns2clk (spd.trp) % 8 << 12);	/* PRETOACT */
-		psdmr |= (ns2clk (spd.trcd) % 8 << 9);	/* ACTTORW */
-		/* BL=0 because for 64-bit SDRAM burst length must be 4 */
-		/* LDOTOPRE ??? */
-		for (i = 0, tmp = spd.write_lat; (i < 4) && ((tmp & 1) == 0); i++)
-			tmp >>= 1;
-		switch (i) {			/* WRC */
-		case 0:
-		case 1:
-			psdmr |= (1 << 4);
-			break;
-		case 2:
-		case 3:
-			psdmr |= (i << 4);
-			break;
-		}
-		/* EAMUX=0 - no external address multiplexing */
-		/* BUFCMD=0 - no external buffers */
-		for (i = 1, tmp = spd.cas_lat; (i < 3) && ((tmp & 1) == 0); i++)
-			tmp >>= 1;
-		psdmr |= i;				/* CL */
-
-		switch (spd.refresh & 0x7F) {
-		case 1:
-			tmp = 3900;
-			break;
-		case 2:
-			tmp = 7800;
-			break;
-		case 3:
-			tmp = 31300;
-			break;
-		case 4:
-			tmp = 62500;
-			break;
-		case 5:
-			tmp = 125000;
-			break;
-		default:
-			tmp = 15625;
-		}
-		psrt = tmp / (1000000000 / CONFIG_8260_CLKIN *
-				  ((memctl->memc_mptpr >> 8) + 1)) - 1;
-#ifdef SPD_DEBUG
-		printf ("\nDIMM type:       %-18.18s\n", spd.mpart);
-		printf ("SPD size:        %d\n", spd.info_size);
-		printf ("EEPROM size:     %d\n", 1 << spd.chip_size);
-		printf ("Memory type:     %d\n", spd.mem_type);
-		printf ("Row addr:        %d\n", spd.nrow_addr);
-		printf ("Column addr:     %d\n", spd.ncol_addr);
-		printf ("# of rows:       %d\n", spd.nrows);
-		printf ("Row density:     %d\n", spd.row_dens);
-		printf ("# of banks:      %d\n", spd.nbanks);
-		printf ("Data width:      %d\n",
-				256 * spd.dataw_msb + spd.dataw_lsb);
-		printf ("Chip width:      %d\n", spd.primw);
-		printf ("Refresh rate:    %02X\n", spd.refresh);
-		printf ("CAS latencies:   %02X\n", spd.cas_lat);
-		printf ("Write latencies: %02X\n", spd.write_lat);
-		printf ("tRP:             %d\n", spd.trp);
-		printf ("tRCD:            %d\n", spd.trcd);
-
-		printf ("OR=%X, PSDMR=%08X, PSRT=%0X\n", or, psdmr, psrt);
-#endif /* SPD_DEBUG */
-	}
-#else  /* !CONFIG_SPD_EEPROM */
-	or    = CONFIG_SYS_OR2;
-	psdmr = CONFIG_SYS_PSDMR;
-	psrt  = CONFIG_SYS_PSRT;
-#endif /* CONFIG_SPD_EEPROM */
-	memctl->memc_psrt = psrt;
-	memctl->memc_or2 = or;
-	memctl->memc_br2 = CONFIG_SYS_SDRAM_BASE | 0x00000041;
-	ramaddr = (uchar *) CONFIG_SYS_SDRAM_BASE;
-	memctl->memc_psdmr = psdmr | 0x28000000;	/* Precharge all banks */
-	*ramaddr = c;
-	memctl->memc_psdmr = psdmr | 0x08000000;	/* CBR refresh */
-	for (i = 0; i < 8; i++)
-		*ramaddr = c;
-
-	memctl->memc_psdmr = psdmr | 0x18000000;	/* Mode Register write */
-	*ramaddr = c;
-	memctl->memc_psdmr = psdmr | 0x40000000;	/* Refresh enable */
-	*ramaddr = c;
-#endif /* CONFIG_SYS_RAMBOOT */
-
-	/* return total 60x bus SDRAM size */
-	return (msize * 1024 * 1024);
-}
-
-int checkboard (void)
-{
-#if   CONFIG_ADSTYPE == CONFIG_SYS_8260ADS
-	puts ("Board: Motorola MPC8260ADS\n");
-#elif CONFIG_ADSTYPE == CONFIG_SYS_8266ADS
-	puts ("Board: Motorola MPC8266ADS\n");
-#elif CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
-	puts ("Board: Motorola PQ2FADS-ZU\n");
-#elif CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
-	puts ("Board: Motorola MPC8272ADS\n");
-#else
-	puts ("Board: unknown\n");
-#endif
-	return 0;
-}
-
-#ifdef CONFIG_PCI
-struct pci_controller hose;
-
-extern void pci_mpc8250_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
-	pci_mpc8250_init(&hose);
-}
-#endif
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI
-	ft_pci_setup(blob, bd);
-#endif
-}
-#endif