diff options
| author | Heiko Schocher | 2014-11-18 11:53:53 +0100 |
|---|---|---|
| committer | Andreas Bießmann | 2015-01-19 12:49:29 +0100 |
| commit | a5f8ccaeab6db682ad5ba47255287604d781d552 (patch) | |
| tree | 8fca4cfcfa36218b20c50c5b90df60736f91a4f6 /board | |
| parent | a1655bb2e1e2bf8f30f40b46d1bb7a45810634be (diff) | |
arm, at91: corvus board updates
- corvus board fix problems with toshiba nand chips
on the corvus board problems with toshiba chips
Manufacturer ID: 0x98 Chip ID: 0xdc encounterd.
Solve this in the following way:
- set other nand timings
- enable CONFIG_SYS_NAND_READY_PIN
- correct the MACH_TYPE setting
Signed-off-by: Heiko Schocher <hs@denx.de>
Diffstat (limited to 'board')
| -rw-r--r-- | board/siemens/corvus/board.c | 12 |
1 files changed, 7 insertions, 5 deletions
diff --git a/board/siemens/corvus/board.c b/board/siemens/corvus/board.c index 0a11540cca0..f3f6dae459a 100644 --- a/board/siemens/corvus/board.c +++ b/board/siemens/corvus/board.c @@ -43,13 +43,13 @@ static void corvus_nand_hw_init(void) writel(csa, &matrix->ebicsa); /* Configure SMC CS3 for NAND/SmartMedia */ - writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | - AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), + writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0), &smc->cs[3].setup); - writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(3) | - AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(2), + writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(4) | + AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(4), &smc->cs[3].pulse); - writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(4), + writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7), &smc->cs[3].cycle); writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | AT91_SMC_MODE_EXNW_DISABLE | @@ -62,9 +62,11 @@ static void corvus_nand_hw_init(void) &smc->cs[3].mode); at91_periph_clk_enable(ATMEL_ID_PIOC); + at91_periph_clk_enable(ATMEL_ID_PIOA); /* Enable NandFlash */ at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); } #if defined(CONFIG_SPL_BUILD) |