diff options
| author | Kuo-Jung Su | 2013-12-02 16:02:59 +0800 |
|---|---|---|
| committer | Heiko Schocher | 2013-12-05 12:25:01 +0100 |
| commit | 6ca6d080d6c75a88709e8ba8d1e6d776bc01b68d (patch) | |
| tree | 739d9567d9e8c0d6ffa0622174d82e60f4d9612a /common | |
| parent | c727618d2cee0b848e5349ec923a5ef0bc3f0447 (diff) | |
cmd_eeprom: bug fix for i2c read/write
The local pointer of address (i.e., addr) only gets
referenced under SPI mode, and it won't be appropriate
to pass only 1-byte addr[1] to i2c_read/i2c_write while
CONFIG_SYS_I2C_EEPROM_ADDR_LEN > 1.
1. In U-boot's I2C model, the address would be re-assembled
to a byte string in MSB order inside I2C controller drivers.
2. The 'CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW' option which could
be found at soft_i2c.c is always turned on in cmd_eeprom.c,
the addr[0] always contains the device address with overflowed
MSB address bits.
Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Mischa Jonker <mjonker@synopsys.com>
Diffstat (limited to 'common')
| -rw-r--r-- | common/cmd_eeprom.c | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c index 02539c40a00..39248054f8d 100644 --- a/common/cmd_eeprom.c +++ b/common/cmd_eeprom.c @@ -161,7 +161,7 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt #if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) spi_read (addr, alen, buffer, len); #else - if (i2c_read (addr[0], addr[1], alen-1, buffer, len) != 0) + if (i2c_read(addr[0], offset, alen - 1, buffer, len)) rcode = 1; #endif buffer += len; @@ -339,7 +339,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn /* Write is enabled ... now write eeprom value. */ #endif - if (i2c_write (addr[0], addr[1], alen-1, buffer, len) != 0) + if (i2c_write(addr[0], offset, alen - 1, buffer, len)) rcode = 1; #endif |