Convert CONFIG_ARMV7_SECURE_BASE et al to Kconfig

This converts the following to Kconfig:
   CONFIG_ARMV7_SECURE_BASE
   CONFIG_ARMV7_SECURE_MAX_SIZE
   CONFIG_ARMV7_SECURE_RESERVE_SIZE

Signed-off-by: Tom Rini <trini@konsulko.com>

10 files changed, 10 insertions, 0 deletions

diff --git a/configs/Bananapi_M2_Ultra_defconfig b/configs/Bananapi_M2_Ultra_defconfig
index 8917af3c93a..a66aef0755a 100644
--- a/configs/Bananapi_M2_Ultra_defconfig
+++ b/configs/Bananapi_M2_Ultra_defconfig
@@ -9,6 +9,7 @@ CONFIG_MMC0_CD_PIN="PH13"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_USB1_VBUS_PIN="PH23"
 CONFIG_USB2_VBUS_PIN="PH23"
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_I2C=y
diff --git a/configs/LicheePi_Zero_defconfig b/configs/LicheePi_Zero_defconfig
index b50bae9bbde..9815348badd 100644
--- a/configs/LicheePi_Zero_defconfig
+++ b/configs/LicheePi_Zero_defconfig
@@ -4,4 +4,5 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-v3s-licheepi-zero"
 CONFIG_SPL=y
 CONFIG_MACH_SUN8I_V3S=y
 CONFIG_DRAM_CLK=360
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
 # CONFIG_NETDEVICES is not set
diff --git a/configs/bananapi_m2_berry_defconfig b/configs/bananapi_m2_berry_defconfig
index 2d65d0fd198..a35fcdb64e8 100644
--- a/configs/bananapi_m2_berry_defconfig
+++ b/configs/bananapi_m2_berry_defconfig
@@ -6,6 +6,7 @@ CONFIG_MACH_SUN8I_R40=y
 CONFIG_DRAM_CLK=576
 CONFIG_MMC0_CD_PIN="PH13"
 CONFIG_USB1_VBUS_PIN="PH23"
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_I2C=y
diff --git a/configs/mx7ulp_evk_defconfig b/configs/mx7ulp_evk_defconfig
index 4f641471acb..192e9df2e49 100644
--- a/configs/mx7ulp_evk_defconfig
+++ b/configs/mx7ulp_evk_defconfig
@@ -10,6 +10,7 @@ CONFIG_ENV_OFFSET=0xC0000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk"
 CONFIG_TARGET_MX7ULP_EVK=y
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
 CONFIG_SYS_LOAD_ADDR=0x60800000
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_USE_BOOTCOMMAND=y
diff --git a/configs/mx7ulp_evk_plugin_defconfig b/configs/mx7ulp_evk_plugin_defconfig
index 0f8e9e886ed..a152c6e93a8 100644
--- a/configs/mx7ulp_evk_plugin_defconfig
+++ b/configs/mx7ulp_evk_plugin_defconfig
@@ -10,6 +10,7 @@ CONFIG_ENV_OFFSET=0xC0000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk"
 CONFIG_TARGET_MX7ULP_EVK=y
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
 CONFIG_SYS_LOAD_ADDR=0x60800000
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; fi; fi; fi"
diff --git a/configs/pg_wcom_expu1_defconfig b/configs/pg_wcom_expu1_defconfig
index 648cb2c8403..04b8d26c8e8 100644
--- a/configs/pg_wcom_expu1_defconfig
+++ b/configs/pg_wcom_expu1_defconfig
@@ -21,6 +21,7 @@ CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-expu1"
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020
 CONFIG_SYS_CLK_FREQ=66666666
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SYS_LOAD_ADDR=0x82000000
diff --git a/configs/pg_wcom_expu1_update_defconfig b/configs/pg_wcom_expu1_update_defconfig
index f4895553d2c..351bc838035 100644
--- a/configs/pg_wcom_expu1_update_defconfig
+++ b/configs/pg_wcom_expu1_update_defconfig
@@ -19,6 +19,7 @@ CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-expu1"
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SYS_LOAD_ADDR=0x82000000
diff --git a/configs/pg_wcom_seli8_defconfig b/configs/pg_wcom_seli8_defconfig
index bca016314e7..8e54fa5d578 100644
--- a/configs/pg_wcom_seli8_defconfig
+++ b/configs/pg_wcom_seli8_defconfig
@@ -21,6 +21,7 @@ CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-seli8"
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020
 CONFIG_SYS_CLK_FREQ=66666666
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SYS_LOAD_ADDR=0x82000000
diff --git a/configs/pg_wcom_seli8_update_defconfig b/configs/pg_wcom_seli8_update_defconfig
index af1812b67d7..1ca468afa60 100644
--- a/configs/pg_wcom_seli8_update_defconfig
+++ b/configs/pg_wcom_seli8_update_defconfig
@@ -19,6 +19,7 @@ CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-seli8"
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SYS_LOAD_ADDR=0x82000000
diff --git a/configs/pinecube_defconfig b/configs/pinecube_defconfig
index e779663a0dd..28e347b4d95 100644
--- a/configs/pinecube_defconfig
+++ b/configs/pinecube_defconfig
@@ -7,6 +7,7 @@ CONFIG_SUNXI_DRAM_DDR3_1333=y
 CONFIG_DRAM_CLK=504
 CONFIG_DRAM_ODT_EN=y
 CONFIG_I2C0_ENABLE=y
+# CONFIG_HAS_ARMV7_SECURE_BASE is not set
 CONFIG_SPL_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y