doc: cleanup - move board READMEs into respective board directories

Also drop a few files referring to no longer / not yet supported
boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Jason Jin <jason.jin@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>

1 files changed, 0 insertions, 73 deletions

diff --git a/doc/README.mvbc_p b/doc/README.mvbc_p
deleted file mode 100644
index a691137550e..00000000000
--- a/doc/README.mvbc_p
+++ /dev/null
@@ -1,73 +0,0 @@
-Matrix Vision mvBlueCOUGAR-P (mvBC-P)
--------------------------------------
-
-1.	Board Description
-
-	The mvBC-P is a 70x40x40mm multi board gigabit ethernet network camera
-	with main focus on GigEVision protocol in combination with local image
-	preprocessing.
-
-	Power Supply is either VDC 48V or Pover over Ethernet (PoE).
-
-2	System Components
-
-2.1	CPU
-	Freescale MPC5200B CPU running at 400MHz core and 133MHz XLB/IPB.
-	64MB SDRAM @ 133MHz.
-	8 MByte Nor Flash on local bus.
-	1 serial ports. Console running on ttyS0 @ 115200 8N1.
-
-2.2	PCI
-	PCI clock fixed at 66MHz. Arbitration inside FPGA.
-	Intel GD82541ER network MAC/PHY and FPGA connected.
-
-2.3	FPGA
-	Altera Cyclone-II EP2C8 with PCI DMA engine.
-	Connects to Matrix Vision specific CCD/CMOS sensor interface.
-	Utilizes 64MB Nand Flash.
-
-2.3.1	I/O @ FPGA
-	2 Outputs : photo coupler
-	2 Inputs  : photo coupler
-
-2.4	I2C
-	LM75 @ 0x90 for temperature monitoring.
-	EEPROM @ 0xA0 for vendor specifics.
-	image sensor interface (slave addresses depend on sensor)
-
-3	Flash layout.
-
-	reset vector is 0x00000100, i.e. "LOWBOOT".
-
-	FF800000	u-boot
-	FF840000	u-boot script image
-	FF850000	redundant u-boot script image
-	FF860000	FPGA raw bit file
-	FF8A0000	tbd.
-	FF900000	root FS
-	FFC00000	kernel
-	FFFC0000	device tree blob
-	FFFD0000	redundant device tree blob
-	FFFE0000	environment
-	FFFF0000	redundant environment
-
-	mtd partitions are propagated to linux kernel via device tree blob.
-
-4	Booting
-
-	On startup the bootscript @ FF840000 is executed. This script can be
-	exchanged easily. Default boot mode is "boot from flash", i.e. system
-	works stand-alone.
-
-	This behaviour depends on some environment variables :
-
-	"netboot" : yes ->try dhcp/bootp and boot from network.
-	A "dhcp_client_id" and "dhcp_vendor-class-identifier" can be used for
-	DHCP server configuration, e.g. to provide different images to
-	different devices.
-
-	During netboot the system tries to get 3 image files:
-	1. Kernel - name + data is given during BOOTP.
-	2. Initrd - name is stored in "initrd_name"
-	3. device tree blob - name is stored in "dtb_name"
-	Fallback files are the flash versions.