diff options
| author | Mamta Shukla | 2022-07-12 14:36:23 +0000 |
|---|---|---|
| committer | Stefano Babic | 2022-07-25 16:11:49 +0200 |
| commit | 4ae1fa338bb074a98953126985cceb9973139f5b (patch) | |
| tree | 9f56878ef9c3930ac92d9a41657321bc240451d7 /doc/board | |
| parent | eca5e000d3b9b089300efc21460852f59129418a (diff) | |
doc: board: nxp: Add instructions to boot from QSPI
Add instructions to build and boot from QSPI Flash
Signed-off-by: Mamta Shukla <mamta.shukla@leica-geosystems.com>
Signed-off-by: Thomas Haemmerle <thomas.haemmerle@leica-geosystems.com>
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Diffstat (limited to 'doc/board')
| -rw-r--r-- | doc/board/nxp/imx8mm_evk.rst | 38 |
1 files changed, 36 insertions, 2 deletions
diff --git a/doc/board/nxp/imx8mm_evk.rst b/doc/board/nxp/imx8mm_evk.rst index b9e67b954fc..5b178d703e9 100644 --- a/doc/board/nxp/imx8mm_evk.rst +++ b/doc/board/nxp/imx8mm_evk.rst @@ -35,8 +35,8 @@ Get the ddr firmware $ ./firmware-imx-8.9 $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir) -Build U-Boot ------------- +Build U-Boot for sd card +-------------------------- .. code-block:: bash @@ -53,3 +53,37 @@ Burn the flash.bin to MicroSD card offset 33KB: Boot ---- Set Boot switch to SD boot + +Build U-Boot for qspi flash card +------------------------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-poky-linux- + $ make imx8mm_evk_fspi_defconfig + $ make + +Currently, there is no direct support to write to QSPI Flash. +Copy flash.bin to ${loadaddr} either from sd card or over network and then copy to +qspi flash + +From sd card to memory + +.. code-block:: bash + + $mmc dev 1 + $mmc read ${loadaddr} 0x00 <size_of_flash.bin/512> + +.. code-block:: bash + + $ sf probe + $ sf erase 0 <size_of_flash.bin_in_hex> + $ sf write $loadaddr 0x00 <size_of_flash.bin_in_hex> + +Boot from QSPI Flash +----------------------- +Set Boot Switch to QSPI Flash + +Pin configuration for imx8mm_revC evk to boot from qspi flash +SW1101: 0110xxxxxx +SW1102: 00100x0010 |