diff options
| author | Fabio Estevam | 2022-01-12 17:49:44 -0300 |
|---|---|---|
| committer | Stefano Babic | 2022-02-05 15:49:01 +0100 |
| commit | 9482a60de96d3fcf09c4e0d4e1160ff17167c0fa (patch) | |
| tree | 7c79f9b9359191165845e39b0dadbef383f50d43 /doc | |
| parent | 1bcda4efed931bb72bfe8a6fbe0f0e8170a5f9ba (diff) | |
doc: imx8mm_evk: Remove ATF_LOAD_ADDR export
imx8mm-u-boot.dtsi passes the ATF load address via the
'entry' and 'load' properties.
Remove the step that performs the ATF_LOAD_ADDR export, which is
now unneeded.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Patrick Wildt <patrick@blueri.se>
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/board/nxp/imx8mm_evk.rst | 1 |
1 files changed, 0 insertions, 1 deletions
diff --git a/doc/board/nxp/imx8mm_evk.rst b/doc/board/nxp/imx8mm_evk.rst index b377c4de276..b9e67b954fc 100644 --- a/doc/board/nxp/imx8mm_evk.rst +++ b/doc/board/nxp/imx8mm_evk.rst @@ -42,7 +42,6 @@ Build U-Boot $ export CROSS_COMPILE=aarch64-poky-linux- $ make imx8mm_evk_defconfig - $ export ATF_LOAD_ADDR=0x920000 $ make Burn the flash.bin to MicroSD card offset 33KB: |